February 20, 2018 NHTSA CAMPAIGN NUMBER: 18V126000
A wheel and hub detachment increases the risk of a crash.
NHTSA Campaign Number: 18V126
Manufacturer Kaufman Trailers of NE, Inc.
Components SUSPENSION
Potential Number of Units Affected 81
Summary
Kaufman Trailers of NC, Inc. (Kaufman) is recalling certain 2018 Kaufman Double Deck Car Hauler
trailers, model numbers FE-3/7K-44 and FE-3/7K-47. The axles may have incorrect spindles which may fail, resulting in the detachment of a wheel and hub
from the trailer.
Remedy
Kaufman will notify owners, and dealers will inspect the axles and replace any axles that have incorrect spindles, free of charge. The recall began on February 28, 2018. Owners may contact Kaufman customer service at 1-336-790-2756 or 1-336-790-6800.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
Vehicle
| KAUFMAN | DOUBLE DECK CAR HAULER | 2018 |
8 Associated Documents
Defect Notice 573 Report
RCLRPT-18V126-2595.PDF 215.212KB
Recall Acknowledgement
RCAK-18V126-4580.pdf 246.132KB
Recall Quarterly Report #3, 2018-3
RCLQRT-18V126-0989.PDF 211.48KB
Recall Quarterly Report #1, 2018-1
RCLQRT-18V126-6058.PDF 211.48KB
Recall Quarterly Report #5, 2019-1
RCLQRT-18V126-1369.PDF 211.48KB
Recall Quarterly Report #4, 2018-4
RCLQRT-18V126-0908.PDF 211.48KB
Recall Quarterly Report #2, 2018-2
RCLQRT-18V126-5509.PDF 211.48KB
Recall Quarterly Report #6, 2019-2
RCLQRT-18V126-1596.PDF 211.565KB
Latest Recalls Documents
- 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter
, AL-KO, Hayes, and Lippert Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
- Compatibility. Trailer axle kit for 3,500lb cargo trailer, 73" hubface - 58" spring center(reference from P2), impressive support to wheels and shock absorbent for RV camper, pack with spring, U-bolt, hanger and shackle kit for replacement.1
- Trailer Axle Parts Oulet. Maximum distance between spring center is 18'', between hubface is 14'', 5 bolt on 4.5 pattern trailer hub, replace the axle with prominent steel-made, provide better support to thefor 3500 lbs cargo trailer.
- Trailer Leaf Spring. Confirm the measurement for sure fit, eye to eye length: 25-1/4 inch; free open: 3 inch; width of leaf: 1-3/4 inch; 4 leaves; 9/16 inch bushing dia, OEM reference: SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184.
- Includes. Tandem trailer leaf spring kit included compatible 4 U-bolts feature 5-1/2'' long, 1/2'' dia, 2 tie plates and 8 hex nuts, 4 hangers, 4pcs 3-1/8" shackle straps and necessary locknuts and shackle bolts for one package easy replacement.
- Durability. Trailer axle springs constructed with prominent steel with anti-corrosion coating, DOT qualified hardware and accessories improve the suspension system for long time and long distance journey in years.
- 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter, AL-KO, Hayes, and Lippert Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
- 73" Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side
- 58" Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side
- Package include: 3500 lbs Trailer Axle with 5-Lug 4.5'' Hubs
- Widely used: Suitable for all light trailers, including trailer axle, boat trailer axle, car trailer axle, ATV trailer axle, lawn and landscape trailer axle, motorcycle trailer axle, cargo trailer axle, enclosed trailer axle, RV trailer axle, etc
- Any questions after receiving Trailer Axle Kit , please contact us freely
- 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter, AL-KO, Hayes, and Lippert Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.