February 20, 2020 NHTSA CAMPAIGN NUMBER: 20E006000
Axles Insufficiently Lubricated
If the bearings are damaged, the wheel may separate and cause a sudden loss of vehicle control, increasing the risk of crash.
NHTSA Campaign Number: 20E006
Manufacturer Meritor
, Inc.
Components POWER TRAIN
Potential Number of Units Affected 1,883
Summary
Meritor, Inc. (Meritor) is recalling certain Meritor MX10-120EVO, MX12-120EVO and MX14-120EVO steer axles. The axles may have insufficient lubrication, which may result in damage to the wheel end bearings.
Remedy
Meritor will notify the vehicle manufacturers that purchased the axles and dealers for those manufacturers will inspect and replace the wheel end components, as necessary, free of charge. The recall began March 23, 2020. Owners may contact Meritor customer service at 1-866-668-7221.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
Equipment
7 Associated Documents
Recall Quarterly Report #1, 2020-1
RCLQRT-20E006-2859.pdf 210.821KB
Recall Acknowledgement
RCAK-20E006-8660.pdf 244.448KB
Defect Notice 573 Report
RCLRPT-20E006-3441.PDF 212.5KB
Defect Notice 573 Report
RCLRPT-20E006-1391.PDF 214.148KB
Recall Quarterly Report #2, 2020-2
RCLQRT-20E006-2477.PDF 211.219KB
Recall Quarterly Report #3, 2020-3
RCLQRT-20E006-8218.PDF 211.304KB
Recall Quarterly Report #4, 2020-4
RCLQRT-20E006-4958.PDF 211.411KB
Latest Recalls Documents
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Daily protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Exceptional high and low temperature protection ranges from -15F to 410F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Meets or exceeds API Services GL-5 and non-synchronized manual transmissions calling for GL-4
- The information below is per-pack only
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Daily protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Exceptional high and low temperature protection ranges from -15F to 410F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Protects against severe temperatures to help extend service life
- Formulated with extreme-pressure additives to minimize gear wear from shock loads
- Helps protect against gear wear from scuffing, scouring, corrosion and pitting
- Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
- WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
- SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
- BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
This product presentation was made with AAWP plugin.