R20AQ-SB – Parking Brake Cable May Contact Fuel Line – 2018-2021 Blue Bird Vision School Buses

May 5, 2020 NHTSA CAMPAIGN NUMBER: 20V249000

Parking Brake Cable May Contact Fuel Line

A fuel leak increases the risk of a fire.

 

NHTSA Campaign Number: 20V249

Manufacturer Blue Bird Body Company

Components PARKING BRAKE, FUEL SYSTEM, GASOLINE

Potential Number of Units Affected 352

 

Summary

Blue Bird Body Company (Blue Bird) is recalling certain 2018-2021 Vision school buses equipped with FordeBay logo 6.8L gasoline engines with an optional right-hand mounted parking brake lever. Due to improper routing of the parking brake cables, the parking brake cable may contact and chafe the gasoline fuel line, potentially causing a fuel leak.

 

Remedy

Blue Bird will notify owners, and dealers will inspect and secure the parking brake cable, as necessary, free of charge. The recall began May 28, 2020. Owners may contact Blue Bird customer service at 1-478-822-2242. Blue Bird’s number for this recall is R20AQ-SB.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


RECALL

RECALL Vision Park Brake Hand Lever Cable Routing

Models Affected: Certain 2018-2021 Vision’s with FordeBay logo 6.8L Gasoline Engines.

Issue: On certain Blue Bird Vision buses equipped with the FordeBay logo 6.8L V10 Gasoline engines and with the Right Hand mounted park brake levereBay logo, the park brake cable may not be routed properly. In certain cases, the park brake cable could contact the gasoline fuel supply line to the engine which may result in a fuel leak.

Corrective Action: Install a Cable Clamp to secure the park brake cable away from the fuel line.

WARNING: Always follow all Federal, State, and Local and Shop safety standards and use proper safety equipment, and thoroughly read and understand all instructions before performing these procedures. Park bus on level surface, apply parking brake, turn of ignition key, and chock wheels. Allow unit to cool before working near exhaust system.

Parts/Items Needed:

Item NumberPart NumberDescriptionQuantity
100024168MOUNT, HEAVY DUTY, .25 HOLE SIZE1
202000057CAPSCREW, HEX HD, 1/4-20X1, GR5, YEL ZN DICH1
301247709WASHER, FLAT, 17/64 ID X 5/8,YEL ZN DICH1
400659979NUT, HEX, FLANGE SER, 1/4-20, BLACK ZINC1
500029998TIE, CABLE, WIDE, 120LB1
610046465TUBE ASSY, FUEL/VPR, ENGINE BNDL, GAS, M101 (if needed)

 

Instructions

1. Using the hardware in the parts list above, install saddle mount Item 1-p/n 00024168 in the vacant hole on the support brace above the transmission.

See Figure 1

*NOTE- The saddle must be positioned on the underside of the brace. Reference Figures 1 & 2.

2. Once the mount is installed, use tie cable item 5-p/n 00029998 to secure the park brake cable.

3. Inspect the parking brake cable routing to ensure the cable does not contact the fuel lines or any other potentially hazardous object in the area.

4. Inspect the fuel lines for any damage or rub through from the park brake cable. If damage is present, replace the fuel line.

 


R20AQ

SECOND FINAL NOTICE

 

DATE:February 1, 2021
TO:Blue Bird Owners
Subject:R20AQ – Hand Lever Park Brake Cable Routing with FordeBay logo 6.8L Gas Engines

 

According to our records, Campaigns Administration has not received confirmation that the above referenced recall, dated May 28, 2020, has been completed.  A copy of Recall R20AQ is attached.   Your buses affected by Recall R20AQ are identified by Blue Bird body number and VIN under Section 2 on the enclosed cover sheet.

 

If this is the first time you received notification of Recall R20AQ, please read the enclosed notification carefully.  Recall R20AQ must be completed, as soon as possible.  To correct this potential issue, Blue Bird will notify owners by mail and provide the affected dealers and owners with the necessary hardware and associated remedy instructions to inspect the fuel line for wear on affected buses and secure the parking brake cable so it cannot contact or cause wear on the gasoline fuel line.

 

Blue Bird will reimburse the labor cost of the repairs related to this recall at no cost to the vehicle owner. The standard repair time (SRT) to accomplish these repairs in accordance with the R20AQ remedy procedure(s) is outlined below.

 

Repair Options and allowable labor times for this campaign:

Repair A (Inspection and Clamp Installation):

  • 20 hours (12 minutes)

Repair B (Fuel Line Replacement, If Needed):

  • 60 hours (36 minutes)

 

Parts to complete Recall R20AQ must be obtained from Blue Bird Recall Administration via e-mail at [email protected] or return the yellow cover sheet to Blue Bird in the pink, self-addressed, postage prepaid envelope to receive parts at no charge.  Be sure to provide a valid shipping address as UPS does not deliver to post office boxes. You should retain a copy of the reply sheet for your records.  Parts are currently available.  

 

If you have already had R20AQ performed on your affected buses, please complete and mail the enclosed recall yellow coversheet to us in the enclosed postage paid pink reply envelope so we may update our recall records.  Be sure the reply sheet is filled out properly.

 

Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.

 

Thank you for your prompt attention to this matter.

 

Sincerely,

 

Lisa Hancock
Corporate Recall Administrator
Blue Bird Corporation
402 Blue Bird Blvd, Fort Valley, Georgia 31030
Phone 478.822.2242  [email protected]

 

BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA  31210 – (478) 825-2021

 


R20AQ

FINAL NOTICE

 

DATE:September 23, 2020
TO:Blue Bird Owners
Subject:R20AQ – Hand Lever Park Brake Cable Routing with FordeBay logo 6.8L Gas Engines

 

According to our records, Campaigns Administration has not received confirmation that the above referenced recall, dated May 28, 2020, has been completed.  A copy of Recall R20AQ is attached.   Your buses affected by Recall R20AQ are identified by Blue Bird body number and VIN under Section 2 on the enclosed cover sheet.

 

If this is the first time you received notification of Recall R20AQ, please read the enclosed notification carefully.  Recall R20AQ must be completed, as soon as possible.  To correct this potential issue, Blue Bird will notify owners by mail and provide the affected dealers and owners with the necessary hardware and associated remedy instructions to inspect the fuel line for wear on affected buses and secure the parking brake cable so it cannot contact or cause wear on the gasoline fuel line.

 

Blue Bird will reimburse the labor cost of the repairs related to this recall at no cost to the vehicle owner. The standard repair time (SRT) to accomplish these repairs in accordance with the R20AQ remedy procedure(s) is outlined below.

 

Repair Options and allowable labor times for this campaign:

Repair A (Inspection and Clamp Installation):

  • 20 hours (12 minutes)

Repair B (Fuel Line Replacement, If Needed):

  • 60 hours (36 minutes)

 

Parts to complete Recall R20AQ must be obtained from Blue Bird Recall Administration via e-mail at [email protected] or return the yellow cover sheet to Blue Bird in the pink, self-addressed, postage prepaid envelope to receive parts at no charge.  Be sure to provide a valid shipping address as UPS does not deliver to post office boxes. You should retain a copy of the reply sheet for your records.  Parts are currently available.  

 

If you have already had R20AQ performed on your affected buses, please complete and mail the enclosed recall yellow coversheet to us in the enclosed postage paid pink reply envelope so we may update our recall records.  Be sure the reply sheet is filled out properly.

 

Questions regarding this recall campaign should be directed to [email protected]

 

Thank you for your prompt attention to this matter.

 

Sincerely,

 

Lisa Hancock
Corporate Recall Administrator
Blue Bird Corporation
402 Blue Bird Blvd, Fort Valley, Georgia 31030
Phone 478.822.2242  [email protected]

 

BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA  31210 – (478) 825-2021

 


R20AQ

 

IMPORTANT SAFETY RECALL NOTICE 

NHTSA Recall Number:   20V-249 School Bus

 

DATE: May 28, 2020

SUBJECT: R20AQ – Hand Lever Park Brake Cable Routing with FordeBay logo 6.8L Gas Engines

 

Dear Blue Bird Owner:               

This important safety recall notice applies to your bus(es) identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. If you no longer own the subject bus(es), please complete the appropriate section of the yellow cover sheet and return to Blue Bird in the enclosed pink postage prepaid envelope.

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Blue Bird Body Company is recalling certain model year 2018 to 2021 Vision School Buses manufactured from September 21, 2016 through February 3, 2020.  On certain Blue Bird Vision buses with gasoline engines equipped with an optional right-hand mounted parking brake lever, the cable may contact the gasoline fuel supply line to the engine, which may result in a fuel leak. Blue Bird has elected to conduct a voluntary safety recall to correct any potential contact between the parking brake cable and gasoline fuel supply line. Blue Bird has evaluated the risk to motor vehicle safety and determined that there is an increased potential of a fire should the contact between the parking brake cable and gasoline fuel supply line result in a fuel leak.  A fire could increase the risk of injury and/or damage to property.

To correct this potential issue, Blue Bird will notify owners by mail and provide the affected dealers and owners with the necessary hardware and associated remedy instructions to inspect the fuel line for wear on affected buses and secure the parking brake cable so it cannot contact or cause wear on the gasoline fuel line.

Blue Bird will reimburse the labor cost of the repairs related to this recall at no cost to the vehicle owner. The standard repair time (SRT) to accomplish these repairs in accordance with the R20AQ remedy procedure(s) is outlined below.

 

Repair Options and allowable labor times for this campaign:

Repair A (Inspection and Clamp Installation):

  • 20 hours (12 minutes)

Repair B (Fuel Line Replacement, If Needed):

  • 60 hours (36 minutes)

 

Parts to complete Recall R20AQ must be obtained from Blue Bird Recall Administration via e-mail at [email protected] or return the yellow cover sheet to Blue Bird in the pink, self-addressed, postage prepaid envelope to receive parts at no charge.  Be sure to provide a valid shipping address as UPS does not deliver to post office boxes. You should retain a copy of the reply sheet for your records.  Parts should be available at/by the end of June.  

Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

If the modifications directed by this notification were performed on your bus prior to the receipt of this recall notification, attach a copy of the work order/invoice. Mail the documents in the pink selfaddressed postage prepaid envelope included with the pink reply sheet to Blue Bird for warranty consideration. Reimbursements will be made in accordance with the requirements of the National Highway Transportation Safety Act, Title 49 Code of Federal Regulations, Parts 573 and 577.

Please contact your local Blue Bird Dealer with any questions regarding this recall campaign. 

 If Blue Bird Body Company should fail to or is unable to remedy this condition without charge to you, you may contact:

ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, D.C. 20590

Or, you may call The National Highway Traffic Safety Administration toll free at:
1-888-327-4236    TTY 1-800-424-9153 or go to: http:/www.safercar.gov

 


R20AQ

 

IMPORTANT SAFETY RECALL NOTICE

NHTSA Recall Number:   20V-249 School Bus

 

DATE: May 28, 2020

TO: U.S. DEALERS

SUBJECT: R20AQ – Hand Lever Park Brake Cable Routing with FordeBay logo 6.8L Gas Engines

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

This important safety recall notice applies to your buses identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the attached yellow cover sheet.

Blue Bird Body Company is recalling certain model year 2018 to 2021 Vision School Buses manufactured from September 21, 2016 through February 3, 2020.  On certain Blue Bird Vision buses with gasoline engines equipped with an optional right-hand mounted parking brake lever, the cable may contact the gasoline fuel supply line to the engine, which may result in a fuel leak. Blue Bird has elected to conduct a voluntary safety recall to correct any potential contact between the parking brake cable and gasoline fuel supply line. Blue Bird has evaluated the risk to motor vehicle safety and determined that there is an increased potential of a fire should the contact between the parking brake cable and gasoline fuel supply line result in a fuel leak.  A fire could increase the risk of injury and/or damage to property.

To correct this condition, Blue Bird will provide the necessary hardware and associated remedy instructions to inspect the fuel line for wear on affected buses and secure the parking brake cable so it cannot contact or cause wear on the gasoline fuel line.

Blue Bird will reimburse the labor cost of the repairs related to this recall at no cost to you the Dealer or to the vehicle owner. The standard repair time (SRT) to accomplish these repairs in accordance with the R20AQ remedy procedure(s) is outlined below.

 

Repair Options and allowable labor times for this campaign:

Repair A (Inspection and Clamp Installation):

  • 20 hours (12 minutes)

Repair B (Fuel Line Replacement, If Needed):

  • 60 hours (36 minutes)

 

Parts to complete Recall R20AQ must be obtained from Blue Bird Recall Administration via e-mail at [email protected] or return the yellow cover sheet to Blue Bird in the pink, self-addressed, postage prepaid envelope to receive parts at no charge.  Be sure to provide a valid shipping address as UPS does not deliver to post office boxes. You should retain a copy of the reply sheet for your records.  Parts should be available at/by the end of June. 

If Blue Bird’s records indicate bus(es) subject to this recall were delivered in your service area, a list of affected bus(es) will be enclosed.  The bus(es) will be identified by Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet.  Dealers should verify correct owners and assure that complete mailing and shipping addresses are provided for each listed owner.  

It is the dealer’s responsibility to verify that the correct owner name, address, and telephone number is provided for each listed vehicle.  Any corrections or updates should be made in ClaimsCenter.  Addresses that cannot be updated should be forwarded to the Recall Administrator.

Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

Dealers are reminded of their responsibilities under Section 154 of The National Traffic and Motor Vehicle Safety Act of 1991.  Dealers are required to complete modifications on units in their inventory before delivering to the final owner.  Reference Blue Bird Body Company Distributor Memo No. 42-92.

If you have in your possession or have sold a bus that was purchased from another dealer, that may be affected by this recall, please notify Lisa Hancock at 478-822-2242 or [email protected] Questions regarding this recall campaign should be directed to Lisa Hancock, as well.

Sincerely,

 

Lisa Hancock
Corporate Recall Administrator
Blue Bird Corporation
402 Blue Bird Blvd, Fort Valley, Georgia 31030
Phone 478.822.2242
[email protected]

 

BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA  31210 – (478) 825-2021

 


4 Affected Products

Vehicle

MAKEMODELYEAR
BLUE BIRDVISION2018-2021

 


11 Associated Documents

Remedy Instructions and TSB

RCRIT-20V249-1936.pdf 559.939KB

 


Recall Acknowledgement

RCAK-20V249-9163.pdf 245.393KB

 


Defect Notice 573 Report

RCLRPT-20V249-6498.PDF 214.211KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20V249-3824.pdf 559.251KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-20V249-7561.pdf 688.815KB

 


Recall Quarterly Report #1, 2020-2

RCLQRT-20V249-5294.PDF 211.142KB

 


Recall Quarterly Report #3, 2020-4

RCLQRT-20V249-7613.PDF 211.327KB

 


ISSUED Renotification Notice

RCRN-20V249-9313.pdf 1600.912KB

 


ISSUED Renotification Notice

RCRN-20V249-5864.pdf 1594.39KB

 


Recall Quarterly Report #2, 2020-3

RCLQRT-20V249-8221.PDF 211.239KB

 


Recall Quarterly Report #4, 2021-1

RCLQRT-20V249-5284.PDF 211.435KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V249&docType=RCL

 


 

Bestseller No. 1
Duthcbw 100-Pack Metal Zip Ties 11.8 inch, Heavy Duty 304 Stainless Steel Self-Locking Cable Ties for Outdoor Use, Multifunctional Cable Ties for Exhaust Wrap, Chain Link Fence Parts, Farms, Pipes
692 Reviews
Duthcbw 100-Pack Metal Zip Ties 11.8 inch, Heavy Duty 304 Stainless Steel Self-Locking Cable Ties for Outdoor Use, Multifunctional Cable Ties for Exhaust Wrap, Chain Link Fence Parts, Farms, Pipes
  • [Superior Durability and Strength] Crafted from top-grade 304 stainless steel, Duthcbw Metal Zip Ties are built to withstand tough outdoor conditions. These robust zip ties offer outstanding tensile strength, ensuring your items stay securely fastened no matter the environment.
  • [Versatile Applications] Duthcbw Stainless Steel Zip Ties are highly versatile, making them perfect for a wide range of industrial tasks. Whether it's securing exhaust wraps or organizing chain link fence parts, these zip ties meet all your heavy-duty requirements.
  • [Reliable Self-Locking Mechanism] Duthcbw Metal Zip Ties feature a dependable self-locking design that ensures a tight, secure fit every time. This user-friendly mechanism makes installation quick and hassle-free, saving you time on your projects.
  • [Weather and Corrosion Resistant] These heavy-duty stainless steel cable ties are designed to resist weather and corrosion, maintaining their strength and reliability even in extreme temperatures. Perfect for outdoor and industrial applications, they stand up to the elements.
  • [Easy to Install and Adjust] Thanks to their flexible yet strong construction, Duthcbw Metal Zip Ties are simple to install and adjust. Whether you're bundling cables or securing materials, these zip ties offer an efficient and reliable solution for all your industrial needs.
Bestseller No. 2
Metal Zip Ties 11.8 inch 100pcs 304 Stainless Steel Zip Ties Heavy Duty Multi-Purpose Self-Locking Cable Ties for Machinery, Vehicles, Exhaust Wrap, Farms, Pipes, Roofs, Cables, and Outdoor Fence
  • FEATURES - Metal zip ties made of 304 stainless steel. These heavy duty zip ties are 4x stronger than regular plastic zip ties. These stainless steel zip ties mean they are High temperature resistant, Cold resistant, Rust and Corrosion resistant. Unlike traditional plastic zip ties, these heavy duty metal ties won't break down by uv light in the sun like normal plastic zip ties.
  • HEAVY DUTY - These stainless steel zip ties can support weight up to 90KG (198lb) which is 4x more than traditional plastic zip ties, and they can support temperatures up to 932 F.
  • EASY TO USE - These self locking zip ties only need a set of needle nose plier to tighten and a diagonal plier or tin snips to cut the excess zip ties.
  • UNIVERSAL APPLICATION - These stainless zip ties are perfect for outdoors, fence, gardens, farms, pipes, roofs, basements, auto application such as exhaust wraps, and more.
Bestseller No. 3
DAFONSO 112PCS Heavy Duty 304 Stainless Steel Cable Tie Gun Kit, Includes 110PCS 11.8 Inch Metal Zip Ties, Self-Locking, UV & Corrosion Resistant, for Fence, Exhaust Pipe, Chicken Coop, Farm Use
  • Heavy-Duty 304 Stainless Steel Construction: Built with 304 stainless steel cable ties and a solid metal cable tie gun, this kit delivers strength, rust resistance, and long-term durability for demanding outdoor and industrial fastening tasks.
  • 200 lb Tensile Strength, Stronger Than Plastic Ties: Self-locking stainless steel cable ties provide up to 200 lb tensile strength, outperforming nylon zip ties while resisting UV exposure, corrosion, heat, and harsh weather conditions.
  • Fast Tensioning & Clean Cutting in One Step: The ergonomic cable tie gun allows precise tightening and smooth cutting in one motion, reducing hand fatigue and improving overall work efficiency when installing metal zip ties.
  • Ideal for Fence, Chicken Coop & Outdoor Installations: Perfect for chain-link fence repair, chicken coop construction, exhaust pipe fastening, cable management, automotive use, farms, workshops, and outdoor applications.
  • Complete 112PCS Cable Tie Gun Kit by DAFONSO: Includes 1 metal cable tie gun with cutter, 110 stainless steel cable ties (11.8”), and an unlocking screwdriver - everything needed for professional-grade outdoor fastening tasks.
Bestseller No. 4
110PCS Metal Zip Ties, 11.8IN +7.8IN Stainless Steel Zip Ties Heavy Duty for Outdoor, Heat Resistant Cable Tie Buckle for Chain Link Fence, Exhaust Wrap, Pipe, Electrical Wiring, 2026 New
  • 110-Piece Mixed Sizes: Includes 100 pcs 11.8inch and 10pcs 7.8inch metal zip ties, perfect for small jobs - organizing wires with wire tie, and large projects - securing chicken coop, wire fence, exhaust pipes, or garden panels. Buying only one pack fits in more applications.
  • 200LBS Strength + Rust Proof Durability: Each heavy duty metal zip tie has 200lbs tensile strength (far stronger than nylon); Resisting corrosion from wind and humidity, KiyHemo stainless steel zip ties can grip well on rough surfaces like exhaust work or chain link fence.
  • High-Level Heat Resistant: KiyHemo stainless steel cable ties handle a wide temp range, making them ideal for heat wrapping or securing heat shields around exhaust pipe.
  • Built-In Buckle + Easy Fencing Installation: Features stainless steel self locking ties - no extra tools needed! just thread the wire tie through the buckle, pull tight, and it grips well. No frequent rechecks like fragile nylon ties.
SaleBestseller No. 5
Lingchievo Metal Zip Tie Gun with 100 PCS 11.8inch(300mm) Stainless Steel Zip Ties,Heavy Duty Zip Tie Tool for Fastening and Cutting Cable Ties,Chain Link Fence Parts for Fence Exhaust Pipe Outdoor
43 Reviews
Lingchievo Metal Zip Tie Gun with 100 PCS 11.8inch(300mm) Stainless Steel Zip Ties,Heavy Duty Zip Tie Tool for Fastening and Cutting Cable Ties,Chain Link Fence Parts for Fence Exhaust Pipe Outdoor
  • Complete All-in-One Kit with Heavy Duty Cutter:Get everything you need with our value-packed metal zip tie tool kit. It includes one professional stainless steel cable tie gun and 100 pieces of 11.7-inch(4.6×300mm) stainless steel cable ties. The integrated cable tie cutter is durable with a stable structure, ensuring long-lasting performance for securing heavy duty zip ties of various lengths.
  • Premium Stainless Steel Construction for Outdoor Use:Built to withstand tough conditions. These stainless steel zip ties heavy duty are rustproof, corrosion-resistant, and tolerate extreme heat and cold,delivering superior performance compared to ordinary plastic ties.
  • Wide Application for Fence Repair and More:Versatile for numerous projects. Perfect as chain link fence parts for repairs, building animal pens, securing cables and pipes, automotive modifications, and outdoor organizing. These metal cable ties serve as reliable fence ties and durable garden ties.
  • Quick and Ergonomic Three-Step Operation:Designed for efficiency and comfort. Simply insert the metal zip tie, squeeze to tension, then press the lever to cut. This ergonomic zip tie gun tool allows for convenient, high-efficiency operation when installing heavy duty cable ties.
  • Durable Solution for Lasting Results:Your go-to zip cut kit for permanent fastening. From wire wrapping tools to fence repair kit essentials, these stainless steel zip ties provide a strong, weatherproof hold. Ideal for professionals and DIYers needing reliable outdoor zip ties.

Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...