May 29, 2020 NHTSA CAMPAIGN NUMBER: 20V316000
Brake Line Routing May Cause Wear and Fluid Leak
A worn rear brake caliper flexible line may cause brake fluid
leakage which may result in a partial or complete loss of the rear brakes, increasing the risk of a crash.
NHTSA Campaign Number: 20V316
Manufacturer Braun Ambulances
Components SUSPENSION, SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 10
Summary
Braun Ambulances (Braun) is recalling certain 2019 Chief XL Type I and Liberty ambulances built on Ram
4500 or 5500 chassis equipped with Compressible Liquid Adaptive Suspension Systems (C.L.A.S.S.), part numbers DS135RS3A, DS135RS3AF, DS135RS3-DM. The rear brake caliper flexible line may have been routed so that it contacts a suspension component, possibly causing excessive wear and a loss of rear brakes. The affected system component is the rear brake caliper flexible line which may be causing brake caliper to wear due to contact suspension components.
Remedy
Braun will notify owners and dealers will replace the rear brake caliper flexible lines and hardware, free of charge. The recall began July 21, 2020. Owners may contact Braun at 1-877-344-9990.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Important Safety Recall
NHTSA Recall Number: 20V316
Date: June 16, 2020
Dear [Dealer Name],
This notice is being sent to you in accordance with the requirements of the National Highway Traffic and Motor Vehicle Safety Act.
Recently, we were informed by LiquidSpring NHTSA Recall 20E031 that it has determined that a defect which relates to motor vehicle safety exists in a component in certain LiquidSpring suspension systems installed on 2019 RAM
4500 and 5500 chassis.
The affected system component is the rear brake caliper flexible line. The routing of the rear brake caliper flexible lines during the installation of the suspension kit may be causing brake caliper flexible line wear due to contact with a suspension component(s). Continued vehicle use with the rear brake caliper flexible line contacting suspension a component(s) may result in partial or complete loss of rear service brakes which could cause damage to the chassis and/or other vehicles, and possibly result in a crash.
You are receiving this notice because [Dealer’s Affected Customer/s and their Vehicle/s] is/are impacted by this recall. It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by the notification under a sale or lease until the defect or noncompliance is remedied.
LiquidSpring recommends that vehicle operator(s) be aware of any abnormal brake pedal feedback or reduced braking ability and that the rear brake caliper flexible lines should be inspected for any leakage. If any wear is found on the rear brake caliper flexible lines (not the protective spiral wrap), do not drive the vehicle.
Please contact LiquidSpring to arrange service to have the rear brake caliper flexible lines inspected and modified to address the potential wear issue, free of charge.
The LiquidSpring contact information is as follows:
Phone: 765-474-7816 Ext. 1 for Customer Service – 8:00 a.m. – 5:00 p.m. EDT
Email: [email protected]
If LiquidSpring or Braun Industries fails or is unable to arrange service as described above without charge, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, DC 20590 or call toll-free Auto Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153); or go to www.safercar.gov.
We apologize in advance for the inconvenience this issue may cause your organization. We will continue to work with LiquidSprings and make every effort to make this as simple as possible on both our Dealers and our Customers.
Sincerely,
2 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| BRAUN AMBULANCES | CHIEF XL TYPE I | 2019 |
| BRAUN AMBULANCES | LIBERTY | 2019 |
3 Associated Documents
Manufacturer Notices(to Dealers,etc)
RCMN-20V316-9742.pdf 170.807KB
Recall Acknowledgement
RCAK-20V316-4830.pdf 244.831KB
Defect Notice 573 Report
RCLRPT-20V316-6715.PDF 213.348KB
Latest Recalls Documents
- Application: Air suspension kit fits for Dodge
Ram
4500 2007-2024, for Dodge
Ram
5500 2007-2024 - Stability and Comfort: Air helper spring kit provides extra stability and improved handling while hauling and towing by reducing wear and tear, eliminating squat, reducing trailer sway and eliminate bottoming out
- Adjustability: Up to 5,000 pounds of load leveling capability, air adjustable from 5 to 100 PSI. It will depend on different road conditions to adjust, provide a safe and comfortable ride
- Extra Protection: An internal jounce bumper is built inside the air spring, it can prevent damage when driving with an empty air spring and provide additional stability while towing or hauling heavy loads
- Warranty: maXpeedingrods warrants its products against manufacturing defects under normal use for 1 year (since the date of purchase), and technical support and customer service
- [Vehicle Fitment]: Compatible with Dodge
Ram
4500 2008-2010, Ram
5500 2008-2010 --- with OEM # 52014061AA // Compatible with Ram
4500 2011-2017, 5500 2011-2017 - [Installation Position]: Front Left and Right (Driver and Passenger Side)
- [Specifications]: ①Dust Shield Included: Yes; ②Extended Length (in.): 22.84; ③Compressed Length (in.): 14.69; ④Upper Mount Type: S1 (1/2); ⑤Lower Mount Type: E2 (14.5X42.6)
- [Reference Number]: 346600, 52014061AA, 65164, 85649
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted suspension shock strut assembly; We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind
- Front Suspension Ball Joint Front Ball Joint Automotive Replacement Suspension Ball Joints fits Ram
4500 2018 2017 2016 2015 2014 2013 2012 2011 fits Ram
5500 2018 2017 2016 2015 2014 2013 2012 2011 fits Sterling Truck Bullet 45 2010 2009 2008 - Front Suspension Ball Joint Front Ball Joint Automotive Replacement Suspension Ball Joints fits Sterling Truck Bullet 55 2010 2009 2008 fits Dodge
Ram
4500 2010 2009 2008 fits Dodge
Ram
5500 2010 2009 2008 - 4 Front Upper Front Lower Suspension Ball Joint
- Important Note: Please use Amazon's vehicle fitment tool first to confirm if the part is correct for your vehicle
- Alpha XD 7500 air springs are the only air springs on the market with one-piece aluminum end caps and 20 support wires giving you maximum strength and durability! The big 7-inch double convoluted bellow type air springs have increased volume for that added load-leveling capacity.
- Application: 2018-2024 RAM
4500/5500 Cab & Chassis (2WD/4WD) - Application Notes: Will fit Cab & Chassis models
- [Vehicle Fitment]: Compatible with Ram
4500 2011-2018 (From 10/25/2010), 5500 2011-2018 (From 10/24/2010) - [Installation Position]: Rear Left and Right (Driver and Passenger Side)
- [Specifications]: ①Type: Gas; ②System: Double Pipe; ③Extended Length (IN): 24.65; ④Compressed Length (IN): 15.51; ⑤Stroke (IN): 9.13; ⑥Quantity Sold: A Set of Two Pieces
- [Reference Number]: 65547, 05168296AA, 68091878AA, 68091881AA, 68091883AA, 68111107AA
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted suspension shock strut assembly. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





