2016-2018 Jayco Motorhomes 9903515 Hydraulic Leveling System

July 14, 2020 NHTSA CAMPAIGN NUMBER: 20V405000

Leveling System Mounting Bracket May Fail

If the mounting bracket fails and allows the pump and reservoir to contact the ground and possibly detach or leak hydraulic fluids, increasing the risk of a crash.

 

NHTSA Campaign Number: 20V405

Manufacturer JaycoeBay logo, Inc.

Components EQUIPMENT

Potential Number of Units Affected 3,629

 

Summary

JaycoeBay logo, Inc. (JaycoeBay logo) is recalling certain 2016-2018 Greyhawk and Redhawk and 2018 Envoy 100 and 200 Series motorhomes. The mounting bracket for the leveling system hydraulic pump may fail and allow the pump or the fluid reservoir to contact the ground.

 

Remedy

JaycoeBay logo will notify owners and dealers will add a support bracket to reinforce the existing support bracket, free of charge. The recall began December 8, 2020. Owners may contact JaycoeBay logo’s customer service at 1-800-517-9137. JaycoeBay logo’s number for this recall is 9903515.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


Hydraulic Leveling System – Pump & Reservoir Support Bracket

Bulletin Type: Safety RecallPublication Date: December 8, 2020
Bulletin #(s): 20V-405B US Units

2020-322B CN Units

Make(s): JaycoeBay logo Motorized Entegra
Job Code: 9903515Model(s):Greyhawk Redhawk,

Envoy 100 Series

Envoy 200 Series

Flat Rate: 2 HoursModel Year(s):2016-2019

 

Incident: The supporting bracket for the hydraulic pump and reservoir breaks, allowing the pump and reservoir to fall to the ground.
Affected Units: All units with a hydraulic system installed by JaycoeBay logo during the original build. CASE RECALL LINES in JaycoeBay logo Partners note the affected unit serial numbers.
Parts Kit: Parts Kit #: 20V-405B
Parts Kit Contents:

(4) .38-16 zinc hex nut

(4) .38-16×1.00 GR5 zinc carriage bolt

(4) .38 zinc USS flat washer

(4) .38 zinc split lock washer

(2) .38-16×1-1-1/2 grade 5 zinc hex tap bolt

(1) .13 steel black 13.50×11.69×2.13 bracket

Misc. Tools & Supplies: Sawzall with steel cutting blade OR 4” die grinder

9/16” long socket and ratchet

9/16” open end wrench

Box to support the pump during the repair

9/16” short socket and extender

Parts Return Information: No parts are to be returned

 

INSPECTION

Inspect hoses and connection for damage, sign of wear or loose connections.

 

INSTRUCTIONS

 

NOTE: The repair will be easier if you do not set the emergency brake on the motorhome. This will allow more slack in the brake cable in the bracket area. Be sure to block the tires and put the gearshift in park to prevent the motorhome from moving during the repair.

 

  1. Obtain a box or similar support mechanism to support the leveling pump so when you remove the bolts from the support bracket you can lower the pump on it. Make sure the support is high enough as to not stress any hydraulic connections once the pump is resting on it. (Picture #2)

 

  1. Using a 9/16” sock wrench, loosen and remove the (2) bolts securing the pump to the support bracket. Remove the bolts and discard, set aside the nuts and lock washers for attaching the new bracket. (Picture #1).

 

  1. Lower the hydraulic pump onto the support box. Insure Make sure the support is high enough as to not stress any hydraulic connections once the pump is resting on it. (Picture #2)

 

  1. Using a sawzall or 4” die grinder, cut the existing support bracket off even with the bottom of the frame rails (Picture 3 & 4). Use caution to insure sparks do not damage the hydraulic hoses and reservoir container.

 

  1. Install Part A of the bracket on the frame rail. It should be placed over the remaining part of the original bracket and on the inside of the emergency brake cable. The top will “hook” over the rail (towards the hydraulic pump).

 

Install Part B of the bracket with the support portion towards the hydraulic pump. Join the (2) bracket pieces together by inserting the (4) carriage bolts through the holes on the top of Part A and on through the holes on Part B. Add the flat washer, the split washer and the nut on each bolt. Using the long socket and ratchet, firmly tighten each nut.

 

  1. Set the hydraulic pump onto the top surface of the new bracket. (Picture #6) Insert the (2) new Hex Bolts through the top of the pump bracket (where the original bolts were). Set the hydraulic pump on the bracket, making sure the bolts are through the holes on the bracket plate C shown on Diagram #5. Adjust the hydraulic pump position as needed to insure it is securely seated on the bracket.

 

  1. Install the original lock washer and nut onto the pump bolt securing the pump to the bracket. Access to the bolt is through the (2) holes in the bottom of the bracket. (Picture #7)

 

NOTE: To make the nut/washer installation easier, place an extra nut into a short 9/16” socket with an extender on it. Place the nut with the lock washer on top, into the socket. Insert the washer/nut into the hole to get it started.

 

  1. Using the long socket and ratchet, tighten the nuts through the holes in the bottom of the bracket. You may need to use the 9/16” open wrench to hold the bolt head while tightening the nut. Securely tighten nuts on both bolts. (Picture 8 & 9)

 

JaycoeBay logo’s sole obligation under our limited warranty is to repair or replace defective materials and/or workmanship deemed our responsibility as determined by JaycoeBay logo in our sole discretion. JaycoeBay logo reserves the right to use new and/or remanufactured parts or materials of similar quality to complete any work, and to make parts and/or design changes as appropriate without notice to anyone. JaycoeBay logo designs and/or materials changes are done without obligation to incorporate such changes in previously manufactured product. JaycoeBay logo makes every reasonable effort to ensure field remedies will not adversely affect performance and/or safety of the unit. This field remedy is not intended to extend to future performance of this RV, or any of its materials, components or parts beyond the standard warranty period. The RV owner’s obligation to notify JaycoeBay logo, or one of its independent, authorized dealers, of a claimed defect does not modify any obligation placed on the RV owner to contact JaycoeBay logo directly when attempting to pursue remedies under state or federal law. Jan. 2019.
903 South Main Street • P.O. Box 460 • Middlebury, IN 46540

 



8 Affected Products

Vehicles

MAKEMODELYEAR
JAYCOeBay logoENVOY 1002018
JAYCOeBay logoENVOY 2002018
JAYCOeBay logoGREYHAWK2016-2018
JAYCOeBay logoREDHAWK2016-2018

 


12 Associated Documents

Recall Acknowledgement

RCAK-20V405-5663.pdf 244.921KB

 


Defect Notice 573 Report

RCLRPT-20V405-4227.PDF 213.274KB

 


Recall Quarterly Report #2, 2021-1

RCLQRT-20V405-0007.PDF 211.233KB

 


ISSUED Interim Owner Notification Letter(Part 577)

RIONL-20V405-2835.pdf 156.467KB

 


Remedy Instructions and TSB

RCRIT-20V405-2002.pdf 1141.236KB

 


Recall 573 Report – Amendment 1

RCLRPT-20V405-5586.PDF 213.195KB

 


Recall 573 Report – Amendment 2

RCLRPT-20V405-5691.PDF 213.194KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20V405-3562.pdf 162.683KB

 


Recall Quarterly Report #1, 2020-4

RCLQRT-20V405-3410.PDF 211.136KB

 


Remedy Instructions and TSB

RCRIT-20V405-7875.pdf 1179.648KB

 


Recall 573 Report – Amendment 3

RCLRPT-20V405-2599.PDF 213.225KB

 


Recall Quarterly Report #2, 2021-1

RCLQRT-20V405-1211.PDF 211.233KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V405&docType=RCL

 


 

Bestseller No. 1
LIBRA Set of 4 9K lb Heavy Duty 24" RV Trailer Camper Stabilizer Leveling Scissor Jacks w/Dual Power Drill Sockets & Complete Set of Mounting Hardware -Model# 26098
  • 【True Heavy-Duty 9,000 lbs Capacity】 Made from thick 11-gauge steel for maximum strength heavy-duty steel with electrophoresis coating for long-lasting durability. One of the strongest RV stabilizer jacks on the market, built to last and safely handle heavy trailers.
  • 【Complete 4-Pack with Power-Drill Ready Socket】 Includes 4 steel jacks and a 3/4" hex magnetic socket for fast power-drill operation. Set up your RV quickly and effortlessly.
  • 【All Installation Hardware Included】 Comes with 16 pcs 3/8" mounting screws, matching 9/16" socket, 11/36" drill bit, and a drilling guide sticker — everything you need for fast and precise installation.
  • 【Adjustable Height for Versatile Fit】 Extended height: 24", retracted height: 5", retracted length: 26", width: 7.5". Designed to stabilize and level a wide range of RVs, camperseBay logo, and trailers.
  • 【Safe & Easy Operation】 For stabilizing and leveling only. Never use for lifting, changing tires, or supporting vehicle weight. Smooth scissor mechanism ensures effortless raising and lowering, even for first-time users.
Bestseller No. 2
RVGUARD RV Stack Jacks 4 Pack, Aluminum Stabilizer Jacks for RV Trailer Camper, Single Support Up to 6000 Lbs, Adjustable from 11" to 17"
  • What will You Get: 4-Pack RV Stack Jacks with rubber pads, which is ideal for stabilizing and leveling your RV. They provide a reliable stabilization solution for your RV, trailer, campereBay logo, etc.
  • Make Your RV Stable: These RV stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, with a square base design, each can support up to 6000lbs, with which you needn’t worry about your RV moving or bouncing anymore.
  • Height Adjustable: The height of the RV stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to-the-ground rigs for sure. Please Note: These jacks are only for stabilization usage. Do Not Use To Raise.
  • Easy to Use: Simply position each stack jack stand underneath your RV and spin the “T” shape handle to raise it to the proper height to reach appropriate leveling and stabilization. Recommend placing wood or concrete blocks under jacks for better use.
  • Lightweight & Portable: These RV jack stands weigh less than 40 lbs in total; besides, when not in use, they can be compacted and nested together for easy storage.
SaleBestseller No. 3
Kohree 7500lbs RV Stabilizer Leveling Scissor Jacks 24" for Travel Trailer Camper, Set of 2, Heavy Duty RV Stabilizer Jacks Kit with Crank Handle and Drill Bit, Black
  • 【Heavy Duty Steel】: Made of heavy-duty steel with electrophoresis on the surface so that it is durable and strong enough to stabilize and level most RVs
  • 【Specification】: Designed with plenty of room for you to stretch the RV scissor jack in 24” maximum height, 4” retracted height, 26" retracted length, and 7.3" width
  • 【2 Way to Use】: The crank handle turns easily to help raise/ lower the campereBay logo scissor jack quickly, power drill (NOT INCLUDED) is more faster. And jack with the smooth tooth gear design of arms to its' ensures straight line vertical extension and retraction for your RVs
  • 【Application】: 24" RV stabilizing scissor jack 7500lbs with wide bow-tie base to help you keep trailer, RVs, trailers, camperseBay logo motorhomes, pop-ups level and stable
  • 【What You Will Get】: 2 * stabilizer jacks, 1 * Crank handle, 1 * Drill Bit. TIPS: It can be used with the Kohree RV stabilizer Jack Pad
Bestseller No. 4
4 Pack House Jacks for Leveling Crawlspace, 11" - 16" Height Range, 11023 lbs Max Load Capacity, House Floor Jacks Post Pole for Leveling
  • Heavy Duty Support: Our Basement Floor Jack is built from tough Q235 steel. Each jack handles up to 11023 lbs with ease. M22 safety locking screws and pins for added strength and safety
  • Upgraded Design for Top Swivel: When you turn the screw to extend the jack, the swiveling top plate ensures flexible alignment, making it highly adaptable for tight or uneven spaces
  • Adjustable Height Design: Range of adjustment: 11" - 16". This adjustable support jack features an adjustable height design. It can be adjusted to the right height with very little effort by turning the swivel rod
  • Simple Operation: First step, place the support bar vertically on a flat surface. Second step, turn the adjusting lever clockwise to adjust the right height, then tighten the M22 nut with a wrench
  • Wide Application: Our Adjustable Support Beam Basement Jack Post can provide temporary or additional support during construction and maintenance. Ideal for temporary support in various places like beams, patios, and construction
Bestseller No. 5
ASTAMOTOR 6 PCS House Floor Jacks Post Pole for Leveling, 11" - 16" Height Range, 6 ton Min and Max Height Capacity, Galvanized, 6 Pack
  • 【Function】House floor Jacks provides temporary or additional support for leveling and stabilizing floor beams and joists during construction and repairs. Jack post can be used for areas such as stairs, porches, roof beams, decks, crawl spaces and heavy load areas.
  • 【Specifications】Range of adjustment: 11 3/5" - 16 1/10"; minimum and maximum height capacity: 13200 lbs / 6 ton in total; base plate dimension: 5" x 5" x 0.19"; base plate hole diameter: 0.5"; top plate dimension: 3" x 3" x 0.19".
  • 【Installation】Simply keep the base plate stationary and swivel the top plate to required height, and then tighten the positioning nut with a wrench in order to secure the top plate, even one person can install and use in seconds.
  • 【High Quality】This adjustable support jack is made of heavy duty steel with zinc plated surface to ensure anti-corrosion and durability.
  • 【Warranty】One-year warranty. If you have any questions, please contact us via Amazon Message directly, our professional customer service would help in 24H.

Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...