August 27, 2020 NHTSA CAMPAIGN NUMBER: 20V510000
Rear Extremity Extends 24″ Behind Rear Guard
A vehicle crashing into the back of the truck could travel under the rear of the truck, increasing the risk of injury.
NHTSA Campaign Number: 20V510
Manufacturer Vac-Tron Equipment, LLC
Components STRUCTURE
Potential Number of Units Affected 126
Summary
Vac-Tron Equipment, LLC (Vac-Tron) is recalling certain 2016-2020 JTV873PTO, HTV873PTO, HTV573PTO, and HTV373PTO vehicles. These vehicles have a rear extremity that extends more than 24 inches behind the rear impact guard.
Remedy
Vac-Tron will notify owners, and dealers will install a remedy kit to prevent vehicles from going under the truck in a crash. The kits and installation will be free of charge. The recall began October 27, 2020. Owners may contact Vac-Tron customer service at 1-352-728-2222. Vac-Tron’s number for this recall is VVK0011.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Subject:
Reflectors, Lights and Discharge Tube Overhang Update Kit (VVK00-0011)
Background:
INADEQUATE LIGHTING AND REFLECTORS;
REAR EXTREMITY EXCEEDS LENGTH LIMITS
The side and rear reflectors, and the rear facing marker lights do not meet Federal Motor Vehicle Safety Standard (FMVSS) governmental regulation 108 for the United States. The discharge tubes on the spoil tank exceed the permitted length and do not meet Title 49 Code of Federal Regulations §393.86 for the United States.
DEATH OR SERIOUS INJURY POSSIBLE
When driving or parking the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, vehicle reflectors and lights will be added.
In the event of a rear impact crash, the vacuum excavator spoil tank discharge tubes may collide with another vehicle, increasing the risk of death or serious injury to vehicle occupants.
Property or equipment damage may also occur.
Solution:
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VVK00-0011 has been created to provide the necessary parts and instructions to add side and rear reflectors and rear facing lights. The spoil tank discharge tubes will also be shortened. In addition, a new Vac-Tron product identification tag will be installed on the vacuum excavator for recordkeeping purposes. The kit must be installed as soon as possible.
Please be reminded that it is a violation of Federal law for you to sell or lease the machines covered by this notification until this recall has been performed on these machines. Substantial civil penalties apply to violations of this law.
DEALER PARTICIPATION
REVIEW REPORT, ORDER KITS, CONTACT CUSTOMERS
1. Reports will be emailed during the week of October 13, 2020, to dealerships shown in our records which have units in their territory affected by this Alert. Please review the report for accuracy, including owner and/or address changes.
If the information contained in the report is NOT correct, please notify the Product Safety Department on or before October 26, 2020 at:
Telephone: 641-621-7060
Fax: 641-621-8562
Email: productsafety@vermeer
.com
2. Dealerships Order Kits by calling Vac-Tron at 888-822-8766.
Each dealership should determine the quantity of Kits to order initially depending upon the number of units that may be available for immediate upgrade. Do not order more Kits than needed for immediate installation.
3. New Vac-Tron PIN (6-digit number) has been assigned to the vacuum excavators affected by this kit. At the time of manufacturer, no VIN or PIN was assigned. A PIN tag must be ordered from productsafety@vermeer.com prior to completion of the kit installation. The new PIN tag will be sent overnight courier to the requesting dealership. Instructions for installation of the PIN tag are included in the Kit instructions. The Truck Make, Model and VIN, and Vac-Tron Model will also be referenced on the bag in which the PIN tag will be sent in. Also see pages 5-8 below for truck VINs and vacuum excavator PINs.
4. Contact your affected customer(s) to schedule a mutually acceptable time to upgrade their machine. Note: Letters will be sent to the customer(s) on or about October 27, 2020. Also refer to Owner Notification section below.
If you have any questions concerning the installation of VVK00-0011, please contact the Vac-Tron Service Department. Vermeer Corporation is assisting Vac-Tron with the administration of this campaign.
REIMBURSEMENT
Upon completion of each Kit installation, a campaign Warranty Claim must be submitted to the Vermeer Corporation Warranty Department for reimbursement of the parts cost of the Kit and labor.
To submit the campaign Warranty Claim, use the Vac-Tron Model and newly assigned PIN.
This kit will reimburse 6.0 hours labor.
Note: Future notices to dealers and owners are dependent upon the receipt of Warranty Claims.
OWNER NOTIFICATION
Sample Letter: Included at the end of this Bulletin is a sample letter which will be sent by Vermeer Corporation directly to the Owners on or about October 27, 2020, via USPS certified/registered mail. Owner registrations indicate no translations are required for this campaign. The owner letter will be available in English only.
This owner notification/letter instructs the owner to contact their local dealership to arrange for a time to have the Kit installed. After receiving VVK00-0011 from VacTron, you must contact your affected customer(s) immediately and schedule a mutually acceptable time to upgrade their machine.
We regret any inconvenience that these corrective measures may cause you. The required work is for the safety of the vehicle driver and occupants, as well as others traveling on the public roadways. We hope that you agree that the safety benefits surpass the inconvenience.
VAC-TRON EQUIPMENT, INC.
SEOCONTENT-START
Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S and/or other
countries. Vermeer Corporation. All Rights Reserved.
Page 1 of 9
Vac-Tron Equipment, LLC
Trenchless
Okahumpka, FL 34762, USA
FIELD CAMPAIGN
SERVICE BULLETIN #
SVV2020-014
DATE: 13 October 2020
CAMPAIGN
TYPE:
Mandatory-Product Safety
CAMPAIGN
CATEGORY:
Kit and Bulletin
DEALER INSTALLATION ONLY
MACHINE /
ATTACHMENT
MODEL (S):
Serial Numbers
Included Excluded Kit Version
HTV873PTO
See attached listing on
Pages 4–7 of this Bulletin for
specific Truck Make, Model
and VIN, and Vac-Tron Model
and new assigned PIN
N/A VVK01
JTV873PTO
HTV573PTO
HTV373PTO
Subject:
Reflectors, Lights and
Discharge Tube
Overhang Update Kit
(VVK00-0011)
Background: INADEQUATE LIGHTING AND REFLECTORS;
REAR EXTREMITY EXCEEDS LENGTH LIMITS
The side and rear reflectors, and the rear facing marker lights do not meet Federal
Motor Vehicle Safety Standard (FMVSS) governmental regulation 108 for the United
States. The discharge tubes on the spoil tank exceed the permitted length and do not
meet Title 49 Code of Federal Regulations §393.86 for the United States.
PRODUCT
SAFETY
RECALL
FIRST NOTICE
Page 2 of 9
SVV2020-014 13 October 2020
DEATH OR SERIOUS INJURY POSSIBLE
When driving or parking the vacuum excavator on public roadways, a crash may
occur resulting in death or serious injury from a driver(s) of other vehicle(s) not
seeing the vacuum excavator at night or during limited sunlight and strike the vacuum
excavator. To reduce the potential of this occurring, vehicle reflectors and lights will
be added.
In the event of a rear impact crash, the vacuum excavator spoil tank discharge tubes
may collide with another vehicle, increasing the risk of death or serious injury to
vehicle occupants.
Property or equipment damage may also occur.
Solution: IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VVK00-0011 has been created to provide the necessary parts and instructions to add
side and rear reflectors and rear facing lights. The spoil tank discharge tubes will also
be shortened. In addition, a new Vac-Tron product identification tag will be installed
on the vacuum excavator for recordkeeping purposes. The kit must be installed as
soon as possible.
Please be reminded that it is a violation of Federal law for you to sell or lease the
machines covered by this notification until this recall has been performed on these
machines. Substantial civil penalties apply to violations of this law.
DEALER PARTICIPATION
REVIEW REPORT, ORDER KITS, CONTACT CUSTOMERS
1. Reports will be emailed during the week of October 13, 2020, to dealerships
shown in our records which have units in their territory affected by this Alert.
Please review the report for accuracy, including owner and/or address changes.
If the information contained in the report is NOT correct, please notify the Product
Safety Department on or before October 26, 2020 at:
Telephone: 641-621-7060
Fax: 641-621-8562
Email: productsafety@vermeer.com
2. Dealerships Order Kits by calling Vac-Tron at 888-822-8766.
Each dealership should determine the quantity of Kits to order initially depending
upon the number of units that may be available for immediate upgrade. Do not
order more Kits than needed for immediate installation.
3. New Vac-Tron PIN (6-digit number) has been assigned to the vacuum excavators
affected by this kit. At the time of manufacturer, no VIN or PIN was assigned. A
PIN tag must be ordered from productsafety@vermeer.com prior to completion of
the kit installation. The new PIN tag will be sent overnight courier to the requesting
dealership. Instructions for installation of the PIN tag are included in the Kit
instructions. The Truck Make, Model and VIN, and Vac-Tron Model will also be
referenced on the bag in which the PIN tag will be sent in. Also see pages 5-8
below for truck VINs and vacuum excavator PINs.
4. Contact your affected customer(s) to schedule a mutually acceptable time to
upgrade their machine. Note: Letters will be sent to the customer(s) on or about
October 27, 2020. Also refer to Owner Notification section below.
Page 3 of 9
SVV2020-014 13 October 2020
If you have any questions concerning the installation of VVK00-0011, please contact
the Vac-Tron Service Department. Vermeer Corporation is assisting Vac-Tron with
the administration of this campaign.
REIMBURSEMENT
Upon completion of each Kit installation, a campaign Warranty Claim must be
submitted to the Vermeer Corporation Warranty Department for reimbursement of the
parts cost of the Kit and labor.
To submit the campaign Warranty Claim, use the Vac-Tron Model and newly
assigned PIN.
This kit will reimburse 6.0 hours labor.
Note: Future notices to dealers and owners are dependent upon the receipt of
Warranty Claims.
OWNER NOTIFICATION
Sample Letter: Included at the end of this Bulletin is a sample letter which will be
sent by Vermeer Corporation directly to the Owners on or about October 27, 2020,
via USPS certified/registered mail. Owner registrations indicate no translations are
required for this campaign. The owner letter will be available in English only.
This owner notification/letter instructs the owner to contact their local dealership to
arrange for a time to have the Kit installed. After receiving VVK00-0011 from Vac-
Tron, you must contact your affected customer(s) immediately and schedule a
mutually acceptable time to upgrade their machine.
We regret any inconvenience that these corrective measures may cause you. The
required work is for the safety of the vehicle driver and occupants, as well as others
traveling on the public roadways. We hope that you agree that the safety benefits
surpass the inconvenience.
VAC-TRON EQUIPMENT, INC.
Attachment:
VVK00-0011 Kit Instructions
Completion Schedule:
Product Safety Alert: Install immediately
90 days from MM/DD/YYYY
180 days from MM/DD/YYYY
1 year from MM/DD/YYYY
Only Units within Standard Limited
Warranty Period
N/A
Reimbursement:
Product Safety Alert:
All Units Listed Above
Parts Labor Paid (Labor Code: SB20)
Only Units within Standard Limited Warranty
Period
No Reimbursement
Internal Reference:
TREAD Act Code
(Choose one or
more codes
applicable)
— Not Applicable 12 Exterior lighting
02 Suspension 16 Structure
03 Service brake system, hydraulic 17 Latch
04 Service brake system, air 19 Tires
05 Parking brake 20 Wheels
11 Electrical 21 Trailer hitch
Page 4 of 9
SVV2020-014 13 October 2020
AFFECTED MACHINES – VVK01-0011
TRUCK
MAKE
TRUCK
MODEL TRUCK VIN VAC-TRON
MODEL
VAC-TRON
PIN
Freightliner MM106042S 1FVACWFC2JHJP7155 HTV373PTO 111111
Ford F650 3FRNF6FC6FV747520 HTV573PTO 161001
Ford F650 1FDNF6AY5GDA02210 HTV873PTO 161022
Ford F750 1FDXF7DE2GDA00186 HTV873PTO 161023
Ford F750 1FDXF7DE2GDA00253 HTV873PTO 161024
Ford F650 1FDNF6DC6GDA00322 HTV573PTO 161027
Ford F650 1FDNF6DCXGDA00646 HTV573PTO 161028
Ford F650 1FDNF6DCXGDA00324 HTV573PTO 161029
Ford F750 1FDXF7DE2GDA02147 HTV873PTO 161030
Ford F750 1FDXF7DE4GDA02148 HTV873PTO 161031
Ford F750 1FDXF7DE6GDA02149 HTV873PTO 161032
Ford F650 1FDNW6DC5GDA00120 HTV573PTO 161034
Ford F650 1FDNF6DC7GDA02144 HTV573PTO 161058
Ford F750 1FDXF7DE5GDA00327 HTV873PTO 161059
Peterbilt 335 2NPLHN6X88M752463 HTV873PTO 161078
Ford F750 1FDXF7DE1GDA04469 HTV873PTO 161079
Ford F750 1FDXF7DE8GDA04470 HTV873PTO 161080
Ford F750 1FDXF7DEXGDA06365 HTV873PTO 161109
Ford F750 1FDXW7DE7GDA00121 HTV873PTO 161110
Ford F750 1FDYW7DXXGDA04394 HTV873PTO 161114
Ford F650 1FDNF6DCXGDA04468 HTV573PTO 161128
Ford F750 1FDXF7DE8GDA06364 HTV873PTO 161129
Ford F550 1FDUF5HY4GEA29811 HTV373PTO 161130
Ford F750 1FDXF7DC3HDB00863 HTV873PTO 161160
Ford F750 1FDXF7DE3GDA07034 JTV873PTO 161171
Ford F750 1FDXF7DE1GDA06366 HTV873PTO 161194
Ford F750 1FDXF7DE3GDA06367 HTV873PTO 161202
Ford F750 1FDXF7DE2HDB01732 HTV873PTO 161203
Ford F650 1FDNF6DE8GDA07306 HTV573PTO 161205
Ford F650 1FDNF6DE6GDA07031 HTV573PTO 161206
Ford F750 1FDXF7DE7HDB02116 HTV873PTO 161208
Ford F750 1FDXF7DE4HDB01733 HTV873PTO 161223
Freightliner MM106042S 3ALACXDT8HDJD3553 HTV873PTO 161228
Ford F650 1FDNF6DE8GDA07032 HTV573PTO 161232
Ford F650 1FDNX6DE7GDA07035 HTV573PTO 161239
Ford F750 1FDNF7DC5HDB02640 HTV873PTO 161241
Ford F750 1FDXF7DE0HDB02118 HTV873PTO 161248
Ford F750 1FDXW7DE5HDB03667 HTV873PTO 161259
Ford F650 1FDNF6DEXGDA07033 HTV573PTO 161260
Ford F750 1FDXF7DE9HDB02117 HTV873PTO 161283
Page 5 of 9
SVV2020-014 13 October 2020
AFFECTED MACHINES – VVK01-0011
TRUCK
MAKE
TRUCK
MODEL TRUCK VIN VAC-TRON
MODEL
VAC-TRON
PIN
Ford F750 1FDXF7DE2HDB02119 HTV873PTO 161284
Ford F750 1FDXF7DE4HDB02297 JTV873PTO 161323
Ford F550 1FDUF5GT9HEC03914 HTV373PTO 171001
Ford F750 1FDXF7DE1HDB03567 HTV873PTO 171003
Ford F750 1FDXF7DE6HDB04245 HTV873PTO 171004
Ford F650 1FDNF6DCXHDB03566 HTV573PTO 171015
Ford F650 1FDNF6DC5HDB05872 HTV573PTO 171094
Ford F650 1FDNF6DC7HDB03704 HTV873PTO 171095
Ford F550 1FD0W5HT2HED33515 HTV373PTO 171115
Ford F750 1FDXF7DE8HDB04246 HTV873PTO 171131
Ford F750 1FDXF7DEXHDB04247 HTV573PTO 171158
Ford F750 1FDXF7DE6HDB05458 HTV873PTO 171167
Ford F650 1FDNF6DC3HDB05871 HTV573PTO 171189
Ford F650 1FDNF6DC7HDB05873 HTV573PTO 171190
Ford F650 1FDNF6DC2HDB07742 HTV573PTO 171191
Ford F550 1FDUF5GT2GED16070 HTV373PTO 171257
Ford F750 1FDXF7DE8HDB05459 JTV873PTO 171305
Ford F750 1FDXF7DE9HDB05874 JTV873PTO 171322
Ford F550 1FD0W5GT5HED05600 HTV373PTO 171354
Ford F750 1FDXF7DE4HDB11629 HTV873PTO 171355
Ford F750 1FDNF7DE4JDF00476 HTV873PTO 171368
Ford F750 1FDXW7DE9JDF01566 HTV873PTO 171463
Ford F550 1FD0W5HT3HED45821 HTV373PTO 171488
Ford F650 1FDNF6DC4HDB07743 HTV573PTO 171501
Ford F650 1FDNF6DC6HDB07744 HTV573PTO 171502
Ford F750 1FDXF7DE0HDB05875 HTV873PTO 171511
Freightliner MM106042S 3ALACWFC2JDJZ6486 HTV873PTO 171512
Freightliner MM106042S 3ALACWFC4JDJZ6487 HTV873PTO 171513
Ford F650 1FDNF6DCXHDB10601 HTV573PTO 171516
Ford F650 1FDNF6DC2HDB07742 HTV573PTO 171991
Ford F750 1FDXW7DE3JDF03040 HTV873PTO 181034
Ford F750 1FDXW7DE5JDF03041 HTV873PTO 181037
Freightliner MM106084S 1FVMCYFE2KHKE9995 HTV573PTO 181038
Ford F750 1FDXW7DE7JDF03042 HTV873PTO 181039
Ford F750 1FDXF7DE2HDB05876 HTV873PTO 181086
Ford F750 1FDNF7DE5JDF04598 HTV873PTO 181088
Ford F750 1FDXF7DE2HDB09765 HTV873PTO 181093
Freightliner MM106042S 3ALACXFC4JDJP3202 HTV873PTO 181137
Ford F750 1FDXF7DE6JDF04599 HTV873PTO 181184
Page 6 of 9
SVV2020-014 13 October 2020
AFFECTED MACHINES – VVK01-0011
TRUCK
MAKE
TRUCK
MODEL TRUCK VIN VAC-TRON
MODEL
VAC-TRON
PIN
Kenworth T3 Series 2NKHHM7X1KM258831 HTV873PTO 181203
Ford F750 1FDXF7DE0KDF00548 HTV873PTO 181228
Ford F750 1FDXW7DE9KDF00550 HTV873PTO 181239
Ford F750 1FDXF7DE2KDF00549 HTV873PTO 181350
Ford F750 1FDXF7DE2KDF01104 HTV573PTO 181355
Ford F750 1FDWF7DE7KDF02597 HTV573PTO 181502
Ford F750 1FDWF7DE9KDF02598 HTV573PTO 181503
Ford F750 1FDXF7DE8KDF00734 HTV873PTO 181555
Ford F750 1FDXF7DE1KDF00736 JTV873PTO 181649
Ford F750 1FDXF7DE8KDF00118 HTV873PTO 181682
Ford F650 1FDNF6DC5KDF05292 HTV573PTO 181694
Ford F550 1FDUF5HY9KDA11836 HTV373PTO 191017
Ford F750 1FDXF7DEXKDF00735 HTV873PTO 191046
Ford F750 1FDWF7DE4KDF04212 HTV573PTO 191074
Ford F650 1FDNF6DC9KDF06588 JTV873PTO 191091
Ford F650 1FDNF6DC0KDF01862 HTV573PTO 191134
Ford F750 1FDXF7DE4KDF01105 JTV873PTO 191146
Ford F750 1FDXF7DE1KDF04821 JTV873PTO 191147
Ford F650 1FDNF6DC1KDF08965 HTV873PTO 191284
Ford F750 1FDXF7DE7KDF05858 HTV873PTO 191295
Ford F650 1FDNF6DC1KDF09758 HTV873PTO 191313
Ford F550 1FDUF5HT1KEF58582 HTV373PTO 191315
Ford F650 1FDNF6DC3KDF09759 HTV873PTO 191396
Ford F650 1FDNF6DC6KDF08928 HTV873PTO 191397
Ford F750 1FDXF7DE9KDF05859 HTV873PTO 191473
Ford F750 1FDXF7DE7KDF04211 HTV873PTO 191489
Ford F750 1FDNF7DE1KDF04048 JTV873PTO 191490
Ford F650 1FDNF6DCXKDF09998 HTV873PTO 191503
Ford F750 1FDXF7DE7KDF05617 HTV873PTO 191513
Ford F750 1FDXF7DE2HDB02296 HTV873PTO 191537
Ford F750 1FDXF7DE5KDF05857 HTV873PTO 191620
Ford F750 1FDXF7DE8KDF15332 JTV873PTO 191673
Ford F750 1FDXF7DEXKDF13162 HTV873PTO 191674
Ford F750 1FDXW7DE5KDF14154 HTV873PTO 191722
Ford F650 1FDNF6DC7KDF10803 HTV873PTO 191746
Ford F650 1FDNF6DC1KDF14278 HTV873PTO 191747
Ford F750 1FDXF7DEXKDF15333 HTV873PTO 191844
Ford F650 1FDNF6DC4KDF15764 HTV873PTO 191863
Ford F750 1FDXW7DE6KDF15765 HTV873PTO 200053
Page 7 of 9
SVV2020-014 13 October 2020
AFFECTED MACHINES – VVK01-0011
TRUCK
MAKE
TRUCK
MODEL TRUCK VIN VAC-TRON
MODEL
VAC-TRON
PIN
Ford F750 1FDXF7DE1MDF00688 HTV873PTO 200054
Ford F750 1FDXF7DE0MDF00682 HTV873PTO 200055
Ford F750 1FDXF7DE4MDF00684 HTV873PTO 200056
Ford F750 1FDXF7DE6MDF00685 HTV873PTO 200057
Ford F750 1FDXF7DE8MDF00686 HTV873PTO 200058
Ford F750 1FDXF7DEXMDF00687 HTV873PTO 200059
Ford F750 1FDXF7DE2MDF00683 HTV873PTO 200082
Ford F650 1FDNF6DC9MDF00440 HTV873PTO 200116
Ford F650 1FDNF6DC0MDF00441 HTV873PTO 200117
Ford F650 1FDNF6DCXKDF14277 HTV873PTO 200123
Ford F650 1FDNF6DC2MDF00442 HTV873PTO 200126
Ford F750 1FDXF7DE3MDF00689 HTV873PTO 200165
Ford F650 1FDNF6DC9MDF00681 HTV873PTO 200428
Ford F750 1FDXF7DEXMDF01483 HTV873PTO 200517
Ford F750 1FDXF7DE7MDF04955 HTV873PTO 200555
Ford F750 1FDXF7DE9JDF04600 JTV1273PTO 181174
Page 8 of 9
SVV2020-014 13 October 2020
27137 S. Hwy 33, Okahumpka, FL 34762
NHTSA SAFETY RECALL NUMBER 20V-508 and 20V-510
VIA USPS CERTIFIED/REGISTERED MAIL
October 27, 2020
Dear «MODEL» Owner:
This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle
Safety Act.
Vac-Tron Equipment, LLC has decided that a defect, that relates to motor vehicle safety, exists in certain
model year 2015–2020 Vac-Tron «MODEL» vacuum excavators mounted to «Truck Make» «Model2» truck.
According to our records, you currently own a Vac-Tron «MODEL» vacuum excavator mount to «Truck Make»
«Model2». Truck Make, Model and VIN, and Vac-Tron Model and new product identification numbers are
shown at the top left of this letter.
INADEQUATE LIGHTING AND REFLECTORS;
REAR EXTREMITY EXCEEDS LENGTH LIMITS
The side and rear reflectors, and the rear facing marker lights do not meet Federal Motor Vehicle Safety
Standard (FMVSS/CMVSS) governmental regulation 108 for the United States. The discharge tubes on the
spoil tank exceed the permitted length and do not meet Title 49 Code of Federal Regulations §393.86 for the
United States.
DEATH OR SERIOUS INJURY POSSIBLE
When driving or parking the vacuum excavator on public roadways, a crash may occur resulting in death or
serious injury from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during limited
sunlight and strike the vacuum excavator. To reduce the potential of this occurring, vehicle reflectors and lights
will be added.
In the event of a rear impact crash, the vacuum excavator spoil tank discharge tubes may collide with another
vehicle, increasing the risk of death or serious injury to vehicle occupants.
Property or equipment damage may also occur.
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VVK00-0011 has been created to provide the necessary parts and instructions to add side and rear reflectors
and rear facing lights. The spoil tank discharge tubes will also be shortened. In addition, a new Vac-Tron
product identification tag will be installed on the vacuum excavator for recordkeeping purposes. The kit must
be installed as soon as possible.
Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually acceptable
time and location to install VVK00-0011 at no cost to you for labor or materials. The installation of this kit is
IMPORTANT
SAFETY
RECALL
First Notice
Reflectors, Lights and
Discharge Tubes Update Kit
(VVK00-0011)
Vac-Tron Model: «Model»
New Vac-Tron PIN: «Model»
This notice applies to your vehicle,
Truck Make: «Truck Make»
Truck Model: «Model2»
Truck VIN: «VIN2»
Page 9 of 9
SVV2020-014 13 October 2020
estimated at 6.0 hours of labor. If the Vermeer dealer travels to the unit to install the kit, costs may be incurred
by the owner. You must have your machine upgraded for these safety features.
Contact your local Vermeer Dealer: «Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2»
«Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip»
«SERV_DEALER_COUNTRY»
Telephone: «Serv_Dealer_Phone»
If you no longer own this unit, please notify the Vermeer Corporation Product Safety Department at:
Toll Free: 800-829-0051, option 1
Telephone: 641-621-7060
E-mail: productsafety@vermeer.com
If possible, please provide the name and address of the new owner. Vermeer Corporation is assisting Vac-
Tron with the administration of this campaign.
We regret any inconvenience that these corrective measures may cause you. The required work is for the
safety of the vehicle driver and occupants, as well as others traveling on the public roadways. We hope that
you agree that the safety benefits surpass the inconvenience.
Very truly yours,
VAC-TRON EQUIPMENT, LLC
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice
to the lessee within ten (10) days.
If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable
time, contact Vermeer Product Safety by email at productsafety@vermeer.com or by calling 800-829-0051,
option 1, or 641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic
Safety Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety
Hotline at 888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
***********************************************************************************************************
Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S and/or other
countries. McLaughlin is a trademark of McLaughlin Group, Inc.
McLaughlin Group, Inc. All Rights Reserved.
Page 1 of 22
FIELD KIT
Vac-Tron Equipment, LLC
Trenchless
Okahumpka, FL 34762 USA
FIELD CAMPAIGN KIT # VVK00-0011 DATE: 13 October 2020
For Dealer Reference: Service Bulletin # SVV2020-014
Reflectors, Lights and Discharge Tube Overhang Update Kit
CAMPAIGN
TYPE:
Mandatory-Product Safety
CAMPAIGN
CATEGORY:
Kit and Bulletin
DEALER INSTALLATION ONLY
MACHINE /
ATTACHMENT
MODEL (S):
Serial Numbers
Included Excluded Kit Version
HTV873PTO
See attached listing on
pages 15–18 of this Kit
Instructions for specific
VIN and Serial/Unit numbers
N/A VVK01
JTV873PTO
HTV573PTO
HTV373PTO
PURPOSE: Lighting, Marking, and Rear Extremity Limits
The side and rear reflectors, and the rear facing marker lights do not meet US Federal Motor Vehicle Safety
Standard (FMVSS/CMVSS) governmental regulation 108 for the United States. The discharge tubes on the spoil
tank exceed the permitted length and do not meet US Title 49 Code of Federal Regulations §393.86 for the United
States. When driving or parking the vacuum excavator on public roadways, a crash may occur resulting in death or
serious injury resulting from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during
limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, vehicle reflectors and
lights will be added. In the event of a rear impact crash, the vacuum excavator spoil tank discharge tubes may
collide with another vehicle, increasing the risk of death or serious injury to vehicle occupants. Property or
equipment damage may also occur.
PRODUCT
SAFETY
RECALL
VVK000011 13 October 2020 Page 2 of 22
VVK00-0011 has been created to provide the necessary parts and instructions to add side and rear reflectors and
rear facing lights. The spoil tank discharge tubes will also be shortened. In addition, a new Vac-Tron product
identification tag will be installed on the vacuum excavator for recordkeeping purposes. The kit must be installed
as soon as possible.
Shutdown Procedure
STOPPING THE MACHINE
For your safety and the safety of others, follow shutdown procedure before working on the
machine for any reason, including servicing, maintaining, cleaning, inspecting, unclogging, or
transporting machine, or as otherwise directed in Operator’s manual.
Step 1: Make sure end of vacuum hose is clear of all spoils, debris, and other materials.
Step 2: Let PTO run to allow vacuum pump to cool down – with CVS Filter Housing / Cyclone in
NEUTRAL.
Step 3: Turn Water Pump Switch to OFF.
Step 4: Pull trigger on high pressure water tool to relieve pressure.
Step 5: Disassemble all water line connections, vacuum hoses, and tools. Stow properly on
machine.
Step 6: Drain CVS Filter Housing / Cyclone.
Step 7: Disengage PTO.
WARNING: Do not point high pressure water tool in the direction of
people when relieving the pressure.
VVK000011 13 October 2020 Page 3 of 22
Install Machine ID Tag
Note: At time of manufacture of
the vacuum excavator, a Product
Identification ID (PIN) was not
assigned. A new PIN has been
assigned and a PIN Tag
7000H433 (A) must be installed
with this Kit but is NOT included
because it is machine specific.
To request the PIN tag, send an
email to:
productsafety@vermeer.com
referencing this Kit #, the Truck
Model, the Truck VIN and the
Vac-Tron Model . The PIN Tag
will be shipped overnight.
1. Position the Machine ID Tag (A)
on the headboard crossmember
in the approx. position shown
(curb side of vehicle). Mark hole
locations on the crossmember
and drill the rivet holes using a
#30 drill bit (.129 in. or 3.26 mm).
2. Attach the Machine ID Tag using
the supplied 1/8” rivets (B).
A
B
VVK000011 13 October 2020 Page 4 of 22
Install Reflectors
1. Reference Figure 1 for parts list.
2. Clean and dry the surface areas
where reflectors are to be
installed.
3. Place the curb-side amber
reflector (1) positioned on the
headboard above the VACUUMNEUTRAL-
PRESSURE decal.
Repeat on the street-side,
placing the reflector at a similar
position on the headboard.
4. Position the side facing red
reflector (2) centered at the
bottom of the grated step as
shown. Repeat for the streetside.
5. Position the rear-facing red
reflectors (2) on the upper
corners of the bumper step as
shown.
Install Marker Lights
1. Reference Figure 2 for parts
list.
2. Drill a Ø0.75” [19.01 mm] hole
above the bumper step in the
location shown.
2 1
2 2
VVK000011 13 October 2020 Page 5 of 22
3. Locate the Deutsch connector (B)
that connects the marker light (A)
to the wire harness under the
bumper. Cut the wires to remove
the Deutsch connector (B) and
discard.
4. Use heat shrink butt connectors
(1) to reconnect the wire harness
to the red marker light (A) and tie
in with one end of the supplied
dual core wire (2). Place the red
marker light (A) back into the
bumper.
5. Feed the dual core wire (2)
through the hole drilled in step 1.
Connect the supplied red marker
light (3) using heat shrink butt
connectors (1). Insert the red
marker light (1) into the hole
drilled in step 2.
6. Ensure that the SAE TOP
indicator is pointed up on all
marker lights.
7. Place split loom (4) over all
exposed wires.
8. Repeat all steps for the streetside
of the vehicle.
1
B
A
1
A
2
1
1
3
2
VVK000011 13 October 2020 Page 6 of 22
Modify the Debris Tank Door
1. Refer to Figure 3 for parts list.
2. Remove the hose assembly (A)
from the debris tank door and
retain for future installation.
3. Remove the 1/2″ bolts (B),
washers (C), and lock nuts (D)
and pull the 6” gate valve (E)
from the flange. Retain the bolts
and washers for future
installation. Discard the lock
nuts.
4. Remove the bolts (F), washers
(G), and lock nuts (H) and pull
the 4” gate valve (I) from the
flange. Retain the bolts,
washers, and flange for future
installation. Discard the lock
nuts.
D B
I
H
F
A
C
E
G
G
C
VVK000011 13 October 2020 Page 7 of 22
5. Disconnect the hydraulic hoses
from the cylinder on the debris
tank door.
6. Remove the bolt (I) and the
hydraulic hose holder top (J)
from each of the two hose
holders on the debris tank door.
Retain for future installation.
7. Store the hydraulic hoses on the
top of the debris tank where they
will be safe from grind and weld
spatter in future steps.
8. Hang a plumb line from the
intake pipe of the debris tank and
position 16.5” [49.1 cm] from the
surface of the bumper as shown.
9. Mark the position of the plumb
line on the top of the intake pipe.
I
J
VVK000011 13 October 2020 Page 8 of 22
10. Aligned with the mark from step
9 ensure to draw the
circumference of the marked line
around the entire tube to cut it
evenly.
11. Cut the intake pipe along the
marked line using a portable
bandsaw or similar tool. Grind
the end of the remaining pipe
section to remove rough edges.
12. Place the 4” gate valve plate
onto the intake pipe as shown
and tack weld into place.
1
VVK000011 13 October 2020 Page 9 of 22
13. Hold the 4” gate valve on the
intake flange and measure the
distance from the cam lock to the
bumper as shown to ensure the
distance is no more than 23”. If
the distance is over 23”, remove
the valve flange and cut the extra
length from the drainpipe as in
step 11 and repeat this
measurement.
14. Once the measurement in step
13 is 23” maximum, weld the
flange on both sides. Stagger
the start/stop points on each side
of the flange.
15. Sand, clean, and paint all
exposed surfaces for both intake
and drainpipes.
16. Attach the 4” gate valve to the
intake flange using the fasteners
retained in step 4 and the
supplied lock nuts (3).
1
H
3
J
I
I
VVK000011 13 October 2020 Page 10 of 22
17. Hang a plumb line from the
drainpipe of the debris tank and
position 14.5” [36.8 cm] from the
surface of the bumper as shown.
18. Mark the position of the plumb
line on the top of the drainpipe.
19. Aligned with the mark from step
18 ensure to draw the
circumference of the marked line
around the entire tube to cut it
evenly.
20. Cut the drainpipe along the
marked line using a portable
bandsaw or similar tool. Grind
the end of the remaining pipe
section to remove rough edges.
21. Position the 6” valve flange (2)
onto the drainpipe and tack weld.
2
VVK000011 13 October 2020 Page 11 of 22
22. Hold the 6” gate valve on the
flange and measure the distance
from the cam lock to the bumper
as shown to ensure the distance
is no more than 23”. If the
distance is over 23”, remove the
valve flange and cut the extra
length from the drainpipe as in
step 16 and repeat this
measurement.
23. One the measurement in step 19
is 23” maximum, weld the flange
on both sides. Stagger the
start/stop points on each side of
the flange.
24. Sand, clean, and paint all
exposed surfaces for both intake
and drainpipes.
25. Attach the 6” gate valve to the
drainpipe flange using the
hardware retained in 9 and the
supplied lock nuts (3).
3 B
C
E
C
2
VVK000011 13 October 2020 Page 12 of 22
26. Remove the gate valve handle
bolt (F) and gate valve handle
(G).
27. Reattach the gate valve handle
(G) positioned approximately
horizontal as shown while the
gate valve is in the CLOSED
position.
28. Replace the hydraulic hoses into
the hose holders. Attach hose
holder tops (J) and fastening
bolts (I) retained from step 6.
F
G
G
F
J
I
VVK000011 13 October 2020 Page 13 of 22
29. Reconnect the hydraulic hoses
from to the cylinder on the debris
tank door.
Replace the Lower Hose Clamp
Arms
1. Remove the lower RH hose
clamp arm. Retain the bolt (B),
washers (C), and nylon washer
(E) for future installation. The
lock nuts (D) may be discarded.
2. Install the new lower RH hose
clamp arm (1) using the bolt
(B), washers (C), and nylon
washer (E) retained in step 1.
Tighten with new nylon lock
nuts (2).
A
D
B
C
E
C
1
2
E
B
C
C
VVK000011 13 October 2020 Page 14 of 22
3. Remove the lower LH hose
clamp arm. Retain the bolt (B),
washers (C), and nylon washer
(E) for future installation. The
lock nuts (D) may be discarded.
4. Install the new lower LH hose
clamp arm (3) using the bolt
(B), washers (C), and nylon
washer (E) retained in step 3.
Tighten with new nylon lock
nuts (2).
5. Replace the hose assembly
(F) onto the debris tank door
retained from step 2 on page
6.
F
B
C E
C
D
3
B
C
E
C
2
F
VVK000011 13 October 2020 Page 15 of 22
AFFECTED MACHINES – VVK01-0011
TRUCK
MAKE
TRUCK
MODEL TRUCK VIN VAC-TRON
MODEL
VAC-TRON
PIN
Freightliner MM106042S 1FVACWFC2JHJP7155 HTV373PTO 111111
Ford F650 3FRNF6FC6FV747520 HTV573PTO 161001
Ford F650 1FDNF6AY5GDA02210 HTV873PTO 161022
Ford F750 1FDXF7DE2GDA00186 HTV873PTO 161023
Ford F750 1FDXF7DE2GDA00253 HTV873PTO 161024
Ford F650 1FDNF6DC6GDA00322 HTV573PTO 161027
Ford F650 1FDNF6DCXGDA00646 HTV573PTO 161028
Ford F650 1FDNF6DCXGDA00324 HTV573PTO 161029
Ford F750 1FDXF7DE2GDA02147 HTV873PTO 161030
Ford F750 1FDXF7DE4GDA02148 HTV873PTO 161031
Ford F750 1FDXF7DE6GDA02149 HTV873PTO 161032
Ford F650 1FDNW6DC5GDA00120 HTV573PTO 161034
Ford F650 1FDNF6DC7GDA02144 HTV573PTO 161058
Ford F750 1FDXF7DE5GDA00327 HTV873PTO 161059
Peterbilt 335 2NPLHN6X88M752463 HTV873PTO 161078
Ford F750 1FDXF7DE1GDA04469 HTV873PTO 161079
Ford F750 1FDXF7DE8GDA04470 HTV873PTO 161080
Ford F750 1FDXF7DEXGDA06365 HTV873PTO 161109
Ford F750 1FDXW7DE7GDA00121 HTV873PTO 161110
Ford F750 1FDYW7DXXGDA04394 HTV873PTO 161114
Ford F650 1FDNF6DCXGDA04468 HTV573PTO 161128
Ford F750 1FDXF7DE8GDA06364 HTV873PTO 161129
Ford F550 1FDUF5HY4GEA29811 HTV373PTO 161130
Ford F750 1FDXF7DC3HDB00863 HTV873PTO 161160
Ford F750 1FDXF7DE3GDA07034 JTV873PTO 161171
Ford F750 1FDXF7DE1GDA06366 HTV873PTO 161194
Ford F750 1FDXF7DE3GDA06367 HTV873PTO 161202
Ford F750 1FDXF7DE2HDB01732 HTV873PTO 161203
Ford F650 1FDNF6DE8GDA07306 HTV573PTO 161205
Ford F650 1FDNF6DE6GDA07031 HTV573PTO 161206
Ford F750 1FDXF7DE7HDB02116 HTV873PTO 161208
Ford F750 1FDXF7DE4HDB01733 HTV873PTO 161223
Freightliner MM106042S 3ALACXDT8HDJD3553 HTV873PTO 161228
Ford F650 1FDNF6DE8GDA07032 HTV573PTO 161232
Ford F650 1FDNX6DE7GDA07035 HTV573PTO 161239
Ford F750 1FDNF7DC5HDB02640 HTV873PTO 161241
Ford F750 1FDXF7DE0HDB02118 HTV873PTO 161248
Ford F750 1FDXW7DE5HDB03667 HTV873PTO 161259
Ford F650 1FDNF6DEXGDA07033 HTV573PTO 161260
Ford F750 1FDXF7DE9HDB02117 HTV873PTO 161283
VVK000011 13 October 2020 Page 16 of 22
AFFECTED MACHINES – VVK01-0011
TRUCK
MAKE
TRUCK
MODEL TRUCK VIN VAC-TRON
MODEL
VAC-TRON
PIN
Ford F750 1FDXF7DE2HDB02119 HTV873PTO 161284
Ford F750 1FDXF7DE4HDB02297 JTV873PTO 161323
Ford F550 1FDUF5GT9HEC03914 HTV373PTO 171001
Ford F750 1FDXF7DE1HDB03567 HTV873PTO 171003
Ford F750 1FDXF7DE6HDB04245 HTV873PTO 171004
Ford F650 1FDNF6DCXHDB03566 HTV573PTO 171015
Ford F650 1FDNF6DC5HDB05872 HTV573PTO 171094
Ford F650 1FDNF6DC7HDB03704 HTV873PTO 171095
Ford F550 1FD0W5HT2HED33515 HTV373PTO 171115
Ford F750 1FDXF7DE8HDB04246 HTV873PTO 171131
Ford F750 1FDXF7DEXHDB04247 HTV573PTO 171158
Ford F750 1FDXF7DE6HDB05458 HTV873PTO 171167
Ford F650 1FDNF6DC3HDB05871 HTV573PTO 171189
Ford F650 1FDNF6DC7HDB05873 HTV573PTO 171190
Ford F650 1FDNF6DC2HDB07742 HTV573PTO 171191
Ford F550 1FDUF5GT2GED16070 HTV373PTO 171257
Ford F750 1FDXF7DE8HDB05459 JTV873PTO 171305
Ford F750 1FDXF7DE9HDB05874 JTV873PTO 171322
Ford F550 1FD0W5GT5HED05600 HTV373PTO 171354
Ford F750 1FDXF7DE4HDB11629 HTV873PTO 171355
Ford F750 1FDNF7DE4JDF00476 HTV873PTO 171368
Ford F750 1FDXW7DE9JDF01566 HTV873PTO 171463
Ford F550 1FD0W5HT3HED45821 HTV373PTO 171488
Ford F650 1FDNF6DC4HDB07743 HTV573PTO 171501
Ford F650 1FDNF6DC6HDB07744 HTV573PTO 171502
Ford F750 1FDXF7DE0HDB05875 HTV873PTO 171511
Freightliner MM106042S 3ALACWFC2JDJZ6486 HTV873PTO 171512
Freightliner MM106042S 3ALACWFC4JDJZ6487 HTV873PTO 171513
Ford F650 1FDNF6DCXHDB10601 HTV573PTO 171516
Ford F650 1FDNF6DC2HDB07742 HTV573PTO 171991
Ford F750 1FDXW7DE3JDF03040 HTV873PTO 181034
Ford F750 1FDXW7DE5JDF03041 HTV873PTO 181037
Freightliner MM106084S 1FVMCYFE2KHKE9995 HTV573PTO 181038
Ford F750 1FDXW7DE7JDF03042 HTV873PTO 181039
Ford F750 1FDXF7DE2HDB05876 HTV873PTO 181086
Ford F750 1FDNF7DE5JDF04598 HTV873PTO 181088
Ford F750 1FDXF7DE2HDB09765 HTV873PTO 181093
Freightliner MM106042S 3ALACXFC4JDJP3202 HTV873PTO 181137
Ford F750 1FDXF7DE6JDF04599 HTV873PTO 181184
VVK000011 13 October 2020 Page 17 of 22
AFFECTED MACHINES – VVK01-0011
TRUCK
MAKE
TRUCK
MODEL TRUCK VIN VAC-TRON
MODEL
VAC-TRON
PIN
Kenworth T3 Series 2NKHHM7X1KM258831 HTV873PTO 181203
Ford F750 1FDXF7DE0KDF00548 HTV873PTO 181228
Ford F750 1FDXW7DE9KDF00550 HTV873PTO 181239
Ford F750 1FDXF7DE2KDF00549 HTV873PTO 181350
Ford F750 1FDXF7DE2KDF01104 HTV573PTO 181355
Ford F750 1FDWF7DE7KDF02597 HTV573PTO 181502
Ford F750 1FDWF7DE9KDF02598 HTV573PTO 181503
Ford F750 1FDXF7DE8KDF00734 HTV873PTO 181555
Ford F750 1FDXF7DE1KDF00736 JTV873PTO 181649
Ford F750 1FDXF7DE8KDF00118 HTV873PTO 181682
Ford F650 1FDNF6DC5KDF05292 HTV573PTO 181694
Ford F550 1FDUF5HY9KDA11836 HTV373PTO 191017
Ford F750 1FDXF7DEXKDF00735 HTV873PTO 191046
Ford F750 1FDWF7DE4KDF04212 HTV573PTO 191074
Ford F650 1FDNF6DC9KDF06588 JTV873PTO 191091
Ford F650 1FDNF6DC0KDF01862 HTV573PTO 191134
Ford F750 1FDXF7DE4KDF01105 JTV873PTO 191146
Ford F750 1FDXF7DE1KDF04821 JTV873PTO 191147
Ford F650 1FDNF6DC1KDF08965 HTV873PTO 191284
Ford F750 1FDXF7DE7KDF05858 HTV873PTO 191295
Ford F650 1FDNF6DC1KDF09758 HTV873PTO 191313
Ford F550 1FDUF5HT1KEF58582 HTV373PTO 191315
Ford F650 1FDNF6DC3KDF09759 HTV873PTO 191396
Ford F650 1FDNF6DC6KDF08928 HTV873PTO 191397
Ford F750 1FDXF7DE9KDF05859 HTV873PTO 191473
Ford F750 1FDXF7DE7KDF04211 HTV873PTO 191489
Ford F750 1FDNF7DE1KDF04048 JTV873PTO 191490
Ford F650 1FDNF6DCXKDF09998 HTV873PTO 191503
Ford F750 1FDXF7DE7KDF05617 HTV873PTO 191513
Ford F750 1FDXF7DE2HDB02296 HTV873PTO 191537
Ford F750 1FDXF7DE5KDF05857 HTV873PTO 191620
Ford F750 1FDXF7DE8KDF15332 JTV873PTO 191673
Ford F750 1FDXF7DEXKDF13162 HTV873PTO 191674
Ford F750 1FDXW7DE5KDF14154 HTV873PTO 191722
Ford F650 1FDNF6DC7KDF10803 HTV873PTO 191746
Ford F650 1FDNF6DC1KDF14278 HTV873PTO 191747
Ford F750 1FDXF7DEXKDF15333 HTV873PTO 191844
Ford F650 1FDNF6DC4KDF15764 HTV873PTO 191863
Ford F750 1FDXW7DE6KDF15765 HTV873PTO 200053
VVK000011 13 October 2020 Page 18 of 22
AFFECTED MACHINES – VVK01-0011
TRUCK
MAKE
TRUCK
MODEL TRUCK VIN VAC-TRON
MODEL
VAC-TRON
PIN
Ford F750 1FDXF7DE1MDF00688 HTV873PTO 200054
Ford F750 1FDXF7DE0MDF00682 HTV873PTO 200055
Ford F750 1FDXF7DE4MDF00684 HTV873PTO 200056
Ford F750 1FDXF7DE6MDF00685 HTV873PTO 200057
Ford F750 1FDXF7DE8MDF00686 HTV873PTO 200058
Ford F750 1FDXF7DEXMDF00687 HTV873PTO 200059
Ford F750 1FDXF7DE2MDF00683 HTV873PTO 200082
Ford F650 1FDNF6DC9MDF00440 HTV873PTO 200116
Ford F650 1FDNF6DC0MDF00441 HTV873PTO 200117
Ford F650 1FDNF6DCXKDF14277 HTV873PTO 200123
Ford F650 1FDNF6DC2MDF00442 HTV873PTO 200126
Ford F750 1FDXF7DE3MDF00689 HTV873PTO 200165
Ford F650 1FDNF6DC9MDF00681 HTV873PTO 200428
Ford F750 1FDXF7DEXMDF01483 HTV873PTO 200517
Ford F750 1FDXF7DE7MDF04955 HTV873PTO 200555
Ford F750 1FDXF7DE9JDF04600 JTV1273PTO 181174
VVK000011 13 October 2020 Page 19 of 22
Figure 1
FIGURE 1 Parts List
REF.
NO.
PART NO. DESCRIPTION
VVK01
QTY.
1 135500469 HIGH VISIBILITY REFLECTIVE STICKER, AMBER 2
2 135500470 HIGH VISIBILITY REFLECTIVE STICKER, RED 4
1 2
VVK000011 13 October 2020 Page 20 of 22
Figure 2
FIGURE 2 Parts List
REF.
NO.
PART NO. DESCRIPTION
VVK01
QTY.
1 135500217 12-10 HEAT SEAL BUTT CONNECTOR 4
2 P-1054 2’ (60.7 cm) LENGTH DUAL CORE CONDUCTOR WIRE 2
3 P-4189 RED MARKER LAMP 2
4 P-2762 1/2″ SPLIT WIRE LOOM, 2’ (30.48 cm) LENGTH 2
1 2
3
4
VVK000011 13 October 2020 Page 21 of 22
Figure 3
FIGURE 3 Parts List
REF.
NO.
PART NO. DESCRIPTION
VVK01
QTY.
1 F375-3353 4” GATE VALVE PLATE 1
2 F375-3601 6” GATE VALVE PLATE 1
3 P-1396 1/2-13 STEEL LOCK NUT 8
1 2
3
VVK000011 13 October 2020 Page 22 of 22
Figure 4
FIGURE 4 Parts List
REF.
NO.
PART NO. DESCRIPTION
VVK01
QTY.
1 135500527 LOWER, LH, HOSE CLAMP ARM 1
2 P-1474 3/8-16 NYLON LOCK NUT 2
3 135500526 LOWER, RH, HOSE CLAMP ARM 1
1 3
2
SEOCONTENT-END
20 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| VAC-TRON | HTV 373 PTO | 2016-2020 |
| VAC-TRON | HTV 573 PTO | 2016-2020 |
| VAC-TRON | HTV 873 PTO | 2016-2020 |
| VAC-TRON | JTV 873 PTO | 2016-2020 |
10 Associated Documents
Recall Quarterly Report #1, 2020-4
RCLQRT-20V510-2851.PDF 211.141KB
Recall Quarterly Report #3, 2021-2
RCLQRT-20V510-8105.PDF 211.32KB
Miscellaneous Document- Before and After
RMISC-20V510-5219.pdf 824.761KB
Recall 573 Report- Amendment 1
RCLRPT-20V510-4922.PDF 217.311KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V510-9234.PDF 211.237KB
Remedy Instructions and TSB
RCRIT-20V510-5060.pdf 2830.743KB
Safety Bulletin
RCSB-20V510-6525.pdf 1262.205KB
Defect Notice 573 Report
RCLRPT-20V510-6359.PDF 215.649KB
Recall Acknowledgement
RCAK-20V510-3227.pdf 244.793KB
Recall Quarterly Report #4, 2021-3
RCLQRT-20V510-3564.PDF 211.426KB
Latest Recalls Documents
- Special Design：Designed specifically for your 2017-2026 CX5 CX-5 model, this Rear Bumper Protector seamlessly fits into your car's interior, enhancing both functionality and aesthetics.
- High-Quality Materials: Made of durable ABS plastic with excellent corrosion resistance and toughness. It can protect your rear bumper panel from wear and scratches.
- Easy Installation: Wipe the rear bumper clean, remove the adhesive backing film, position the protection strip, stick it flat, and press evenly for a few seconds to ensure it adheres securely.
- Multiple Use: Effectively prevents scratches and damage during loading and unloading in the car trunk. Also covers existing scratches and stains to keep the car looking new and clean.
- Good Service: We care about your feedback,and if there is any issues with our product or service for any reason, do not hesitate to contact us. We will spare no effort to get your satisfaction.
- High-quality material: High-quality soft and environmentally friendly material, reducing external impact, durable and scratch-resistant, flexible and flexible, and full of toughness.
- Excellent performance: Anti-scratch, abrasion resistance, anti-aging, groove anti-skid design, effectively prevent items from falling, and provide protection for scratches.
- Easy to install: After cleaning the location that needs to be installed, it can be installed privately without drilling or welding.
- Universal Fit - Designed to fit most vehicles, these flexible rubber floor mats mold to the shape of your car's interior. Measurements: 42*3.4inches
- Buy with confidence: If you have any questions, please contact us, we are always at your service.
- Compatible with select 2017-2025 Mazda
CX-5 Models. Please confirm fitment to your year, make, and model in Amazon ConfirmedFit prior to purchase. - Coverage: Rear Bumper, Color: Black
- Safeguard your rear bumper from scratches, paint chipping, and everyday wear and tear with the WeatherTech BumperTopper. Made from an impact-resistant hard plastic, it stands up to damage. When it’s time to trade your vehicle in, BumperTopper also helps cover small scuffs and blemishes to protect resale value.
- BumperTopper attaches directly to your bumper’s surface with Very High Bond adhesive strips. A Center Indication Mark makes installation quick, easy and accurate. This rear bumper cover hugs the profile of your vehicle’s bumper for custom-fit protection. BumperTopper is thin enough (3mm) to allow complete closure of your trunk or hatchback, yet tough enough to protect your vehicle.
- Made in USA! Images may be representative and may not reflect the actual vehicle or part.
- Only compatible with Tesla Model Y Juniper (Premium and Performance 2025/2026)
- Seamless Protection: Protects the rear bumper from scratchs and daily wear.
- Secure All-Weather Adhesion: Full length waterproof adhesive prevents lifting and peeling over time.
- Easy to Install: Added sticker guides with handles ensure precise alignment; no tools needed.
- Durable Surface: Textured surface enhances grip and resists fading or cracking.
- High-quality material: High-quality soft and environmentally friendly material, reducing external impact, durable and scratch-resistant, flexible and flexible, and full of toughness.
- Excellent performance: Anti-scratch, abrasion resistance, anti-aging, groove anti-skid design, effectively prevent items from falling, and provide protection for scratches.
- Easy to install: After cleaning the location that needs to be installed, it can be installed privately without drilling or welding.
- Universal Fit - Designed to fit most vehicles, these flexible rubber floor mats mold to the shape of your car's interior. Measurements: 41.5*3.6inches
- Buy with confidence: If you have any questions, please contact us, we are always at your service.
Last update on 2026-05-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.