October 27, 2020 NHTSA CAMPAIGN NUMBER: 20V661000
Side Facing Seatbelt Anchored Improperly
Separation of the upper harness may increase the risk of injury to the occupant in the event of a crash.
NHTSA Campaign Number: 20V661
Manufacturer Braun Ambulances
Components SEAT BELTS
Potential Number of Units Affected 291
Summary
Braun Ambulances (Braun) is recalling certain 2017-2020 Demers TSE and EXE Ambulances for a problem with the seat belt system installed in the rear medical module of the ambulance at the side-facing bench seating positions. Continued use of affected upper seat belt harness may result in a partial or complete separation from its mounting.
Remedy
Braun Ambulances will notify owners, and dealers will remove and reinstall the harness mounting bolts with a modified configuration, free of charge. The recall began November 16, 2020. Owners may contact Braun Ambulances customer service at 1-877-344-9990.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
November 12, 2020
VEHICLE DEFECT
OWNER NOTIFICATION LETTER
IMPORTANT SAFETY RECALL
This notice applies to your Demers Ambulance, VIN:
Subject: 6-Point Seatbelt / Transit and Sprinter
Type II / Modification Safety Recall Notice Dear Demers Ambulance Owner:
Demers Ambulances has determined that a defect which relates to motor vehicle safety exists in certain Demers TSE and EXE ambulances fitted with 6-point seatbelt systems on the bench seat in the module. The affected 6-point seatbelt component is the upper anchorage sub-assembly. Because of a design error, the bolt(s) anchoring the upper seatbelt harness(es) at the bench seat positions may become loose because of incorrect hardware, and their order of installation.
You are receiving this notice because our records indicate that you may have purchased a vehicle equipped with an affected 6-point seatbelt squad bench.
Demers recommends that vehicle operators immediately take appropriate action to have the upper anchorage(s) retrofitted by an officially, authorized technician as described below. The risk to motor vehicle safety reasonably related to the above defect is that the upper harness may not properly restrain bench seat occupants in the event of a crash. Improperly restrained occupants can incur various injuries, perhaps severe or fatal.
To temporarily address the defect (and ONLY until the anchorage assembly can be inspected and modified by an authorized technician), you could follow the instructions below on page 3 of this letter.
Authorized Technicians (Demers dealers and authorized fleet workshops) will be receiving a bulletin with instructions on how to permanently remedy this defect. The bulletin will provide a detailed description (including appropriate illustrations) of each step required to correct the defect. The remedy will involve a repair consisting of removing the bolts and reinstalling them with a modified configuration. Demers will provide this remedy free of charge.
If you are not a fleet owner authorized to perform work under the Demers warranty, contact Demers Ambulances or your official Demers dealer to schedule an appointment to have your vehicle inspected and, if necessary, the work performed. The Demers Ambulance contact information is as follows:
- Phone: 1-800-363-7591 ext 4 for Customer Care – 8:00 a.m. – 5:00 p.m. EDT
- Email: [email protected]
The earliest date on which the defect will be remedied without charge will be 10-30-2020. The estimated time reasonably necessary to perform the labor required to correct the defect is 45 minutes.
You may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov, if the owner believes that:
- The manufacturer, distributor, or dealer has failed or is unable to remedy the defect or without charge.
- The manufacturer has failed or is unable to remedy the defect without charge) within a reasonable time, which is not longer than 60 days in the case of repair after the owner’s first tender to obtain repair following the earliest repair date specified in the notification, unless the period is extended by Administrator.
Any lessor who receives this notification must send a copy of this notice to the lessee.
Demers has a program for reimbursing owners for pre-notification remedies. If you have already paid to remedy the defect explained in this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of a problem associated with a defect .To obtain information about reimbursement call or emails Demers as indicated above to learn about:
- limits on the time period in which the repair or replacement of the recalled vehicle or equipment must have occurred;
- necessary documentation that must be submitted to obtain reimbursement;
- how to submit a claim for reimbursement of a pre-notification remedy; and
Commitment to safety, quality and respect for the customer are our highest priorities. Please accept our sincere apology for any inconveniences that may result from the above notice.
Sincerely,
Kim Braun
President USA
Subject: 6-Point Seatbelt / Transit and Sprinter Type II / TEMPORARY Modification Instructions
Ambulance owners must have anchorage sub-assemblies inspected and PERMANENTLY modified by an authorized technician.
Step #1 – Locate the eight (8) anchorages and remove their plastic covers
Step #2 – Torque each bolt at 25 lbs/foot and re-install plastic cover
Step #3 – Schedule permanent modification with authorized technician
8 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| DEMERS AMBULANCES | EXE | 2017-2020 |
| DEMERS AMBULANCES | TSE | 2017-2020 |
8 Associated Documents
Recall Quarterly Report #1, 2020-4
RCLQRT-20V661-1255.PDF 211.123KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V661-4977.PDF 211.225KB
Owner Notification Letter(Part 577)
RCONL-20V661-7561.pdf 250.921KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V661-8643.pdf 251.317KB
Recall Acknowledgement
RCAK-20V661-5444.pdf 244.822KB
Defect Notice 573 Report
RCLRPT-20V661-4724.PDF 218.002KB
Recall Quarterly Report #4, 2021-3
RCLQRT-20V661-1145.PDF 211.401KB
Recall Quarterly Report #3, 2021-2
RCLQRT-20V661-6148.PDF 211.401KB
Latest Recalls Documents
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
- ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
- OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
- ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
- WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota, Ford, Honda, Chevrolet, Nissan, Dodge, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- 【Full Systems Automotive Diagnostic】 More than checking engine, ABS and SRS, OBDMATE OM970 obd2 scanner performs comprehensive diagnostics on all electric modules. It quickly scans and clears fault codes, turns off warning lights, reads live data, and features Auto-VIN technology.
- 【Live Datastream&4-in-1 Graph】 Easily view live sensor data such as RPM, fuel trims, ATF temperature, wheel speed sensor, battery voltage and so on. OM970 scan tool also supports 4-in-1 trend graphing. Spend just 3 minutes to check – and you'll know exactly what's going wrong, helping you avoid hundreds in dealership diagnostic fees.
- 【One-Click I/M Readiness&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether your vehicle's emissions-related systems are operating properly. Help you get smog-check ready quickly. OM970 obd2 diagnostic tool supports all essential OBD2 functions you need. Plus, it features battery voltage test and DLC 16-PIN test.
- 【Straightforward Menus with Easy Navigation】 All functions are easy to understand without obscure decriptions. 3.5" Large screen delivers clear readings while keeping one-hand operation. The car diagnostic tool comes with a silicone protective case and a hard-shell carrying case, ensuring long-lived durability and drop resistance.
- 【Budget-Friendly, No Subscriptions, Free Software Updates】 Plug and play: no bluetooth pairing, monthly fees, Wi-Fi connection, or any other troublesome initial settings. OM970 obd2 scanner works out of the box with the latest software. Lifetime free upgrade.
- ✔️【Professional SRS Reset for 1994-2003 BMW】 Designed specifically for classic BMW models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW built before 1994 or after 2003.
- ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
- ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
- ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
- ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
This product presentation was made with AAWP plugin.