2021 Jayco Alante

9903527 – Engine Cover Does Not Have Proper Insulation – 2020-2021 Jayco Alante, Precept, & Precept Prestige & Entegra Vision, Vision XL Motorhomes

by

October 29, 2020 NHTSA CAMPAIGN NUMBER: 20V667000

Engine Cover Does Not Have Proper Insulation

Excessive surface temperatures can increase the risk of injury to the occupants.

 

NHTSA Campaign Number: 20V667

Manufacturer JaycoeBay logo, Inc.

Components ENGINE

Potential Number of Units Affected 360

 

Summary

JaycoeBay logo, Inc. (JaycoeBay logo) is recalling certain 2020-2021 Alante, Precept, and Precept Prestige motorhomes and Entegra Vision, Vision XL motorhomes built on a FordeBay logo F-53 chassis. The engine covers may not contain sufficient heat insulation, causing the interior surface temperatures to be excessive.

 

Remedy

JaycoeBay logo will notify owners, and dealers will install an additional insulation insert, and a foam seal on the outer edge of the cover, free of charge. The recall began December 28, 2020. Owners may contact JaycoeBay logo customer service at 1-800-283-8267. JaycoeBay logo’s number for this recall is 9903527.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Engine cover insulation on F53 Chassis

Bulletin Type:Safety RecallPublication Date:December 28, 2020
Bulletin #(s):20V-667 US Units

2020-531 Canadian Units

Make(s):JaycoeBay logo

Entegra

Job Code(s):9903527Model(s):Alante, Emblem, Vision,

Vision XL, Precept and Precept Prestige

Flat Rate(s):9903527A-Install Kit A & B – 2 Hr.

9903527B- Install Kit B – 1 Hr.

Model Year(s):2020 and 2021

 

Incident: Engine covers installed on some F53 chassis models do not contain appropriate insulation.
Affected Units: Affected unit list is located at end of instructions
Parts Kit:

20V-667A

20V-667B

Parts Kit 20V-667A:

1 molded foam insert

6’ foam seal

4 bolts

 

Parts Kit 20V-667B :

20 screws, hex washer .25×1.25 TEK3

1 molded foam floor insert 22.75”

1  molded foam floor insert 29.5”

2  brackets 1.00×2.31×3.00 14 GA Black

1 bracket 1.00×2.31×20.00 14 GA Black

1 plate 2.00×20.00 14GA Black

 

Please confirm what kit/s are required per serial number using the worksheet posted on Partners.

Misc. Tools & Supplies: Large flat blade screwdriver

Screw gun with #2 square bit

2-7/16”  end wrench

3/8” socket driver

5/16” socket driver

10 mm socket driver and 10mm open end wrench

Putty knife

Small hacksaw/cutting tool (to cut off screws)

 

INSTRUCTIONS for remedy that requires Parts Kit 20V-667A

 

  1. Remove the passenger seat to gain better access to the engine cover. To remove the seat, remove the (4) bolts on the seat pedestal using a 2-7/16” wrench.

 

There are (2) bolts on each side of the pedestal.

 

  1. Loosen the engine console valance to gain access to the console fasteners by removing the screws on the valance. Next:
  • Remove the screws securing the engine cover.
  • Remove the engine cover.

 

  1. Turn the engine cover over.

 

  1. Using the flat blade screwdriver, remove the bonded flange and seal from the bottom of the cover.

 

  1. Insert the foam insert into the cover. Install the seal to the foam on the outer edge.

 

  1. Reinstall the engine cover, the console valance and the passenger seat.

Secure the passenger seat to the pedestal with NEW bolts (4) and torque each to 20ft/lbs.  

 

INSTRUCTIONS for remedy that requires Parts Kit  20V-667B

 

  1. Park the motorhome so that the front tire(s) turn slightly outward, towards the driver’s side. This will allow easier access to the floorboard panel under the unit. Make sure the emergency brake is applied and/or block the tires so the unit cannot roll or move.

 

  1. Locate the floorboard panel under the unit (next to the engine). There may be a silver insulation insert in the one side of the panel

 

  1. You will need to remove a cable and a line of conduit running across the floorboard panel so that you are able to install the foam insert(s). Using a screw gun and 10mm socket driver, remove the screws that are holding the cable bracket in place.  You may need the 10mm open end wrench to hold the screw cap in place while removing the screw.  Let both lines drop; you will re-install these in a later step. Discard the screws.

 

  1. Prepare the floorboard compartments to facilitate an easier install of the foam insert.

 

a. Use a putty knife and scrape off all excess foam inside the compartment(s).

b. Use a small hacksaw or cutting tool to remove any screws protruding through the floorboard. This will create a smooth surface for the foam insert installation.

 

Bracket and Foam Installation Configuration

  1. Using the self-tapping screws, install the (2) 2.31“x 3.0” brackets on the inside of the floorboard pan (side closest to the engine) using the pre-drilled holes in the bracket. The bracket “lip” should be installed towards the inside of the pan (this will hold the foam insert in place).   Install (1) bracket on each side of the indentation in the floorboard pan.  The top of the bracket should be against the top of the pan.

 

  1. Install the 29.5” foam into the floorboard pan. The (2) brackets you just installed will secure the one side of the foam insert.  Before installing the insert, make sure the angles and notch are in the right place according to the shape of the pan.

 

  1. Using the self-tapping screws, install the 2.31” x 20.0” center bracket (bracket 2 in the diagram) using the pre-drilled holes. Inure the bracket is centered in the middle of the pan frame. The bracket lip will secure the edge of both foam inserts.

 

  1. Install the 22.75” foam insert in the other side of the floorboard pan, taking note of angles before putting the insert in place.

 

 

  1. Using the self-drilling/tapping screws, install the 2” x 20” bracket (bracket 3 in the diagram) using the pre-drilled holes. Make sure you center the bracket correctly onto the floorboard pan frame so the screws go into the metal and not the foam. When the brackets are in proper position they will securely supports the foam insert.

 

  1. Re-install the cable and the line of conduit using the supplied self-drilling/tapping screws. You can install the cable through the center bracket. Install the conduit line in the last bracket added.

 

AFFECTED UNIT LISTING –  Recall 20V-667  2020-531

2020 Alante  L1AF0088-0108 AS0120-0137  AU0130-0144

2021 Alante   M1AF4051-4096  AS4051-4103  AU4051-4118, 9000  AV4051-4084  AX4051-4079

2020 Precept L1UG0241-0260  UL0205-0231

2021 Precept M1UA4051-4086,9000-9001  UB9000-9011   UG4051-7172,9025,  UL4051-4140,9000-9021  UV4051-4070,9000

2021 Precept Prestige  M1DH4051-4072, 9000-9002   DT4051-4060  DU4051-4060,9002-9003

2020 Vision L1AF8088-8097  AS8098-8113  AU8087-8099

2021 Vision M1AF8051-8105  AS8051-8117, 9000   AU8051-8092,9001  AV8051-8064

2021 Emblem  M1DH8051-8078, 9003  DT8051-8060  DU8051-8065, 9000,9001

2021 Vision XL  M1UA8051-8088  UB8051-8078,9012  UG8051-8127, 9000-9024

 

JaycoeBay logo’s sole obligation under our limited warranty is to repair or replace defective materials and/or workmanship deemed our responsibility as determined by JaycoeBay logo in our sole discretion. JaycoeBay logo reserves the right to use new and/or remanufactured parts or materials of similar quality to complete any work, and to make parts and/or design changes as appropriate without notice to anyone. JaycoeBay logo designs and/or materials changes are done without obligation to incorporate such changes in previously manufactured product. JaycoeBay logo makes every reasonable effort to ensure field remedies will not adversely affect performance and/or safety of the unit. This field remedy is not intended to extend to future performance of this RV, or any of its materials, components or parts beyond the standard warranty period. The RV owner’s obligation to notify JaycoeBay logo, or one of its independent, authorized dealers, of a claimed defect does not modify any obligation placed on the RV owner to contact JaycoeBay logo directly when attempting to pursue remedies under state or federal law. Jan. 2019.

903 South Main Street • P.O. Box 460 • Middlebury, IN 46540

 

10 Affected Products

Vehicles

MAKEMODELYEAR
ENTEGRAVISION2020-2021
ENTEGRAVISION XL2020-2021
JAYCOeBay logoALANTE2020-2021
JAYCOeBay logoPRECEPT2020-2021
JAYCOeBay logoPRECEPT PRESTIGE2020-2021

 

13 Associated Documents

Recall Quarterly Report #2, 2021-1

RCLQRT-20V667-2391.PDF 211.232KB


⬇ Download PDF (206.28 KB)

 

Remedy Instructions and TSB

RCRIT-20V667-7337.pdf 1234.686KB


⬇ Download PDF (1.18 MB)

 

Recall 573 Report

RCLRPT-20V667-7605.PDF 213.59KB


⬇ Download PDF (208.58 KB)

 

ISSUED Owner Notification Letter(Part 577)

RCONL-20V667-3992.pdf 55.458KB


⬇ Download PDF (54.16 KB)

 

Manufacturer Notices(to Dealers,etc)

RCMN-20V667-9521.pdf 141.997KB


⬇ Download PDF (138.67 KB)

 

Recall 573 Report – Amendment 2

RCLRPT-20V667-6707.PDF 213.808KB


⬇ Download PDF (208.8 KB)

 

Miscellaneous Document – Affected units w required Parts Kits 12-28-20

RMISC-20V667-6598.pdf 449.136KB


⬇ Download PDF (438.61 KB)

 

Recall Quarterly Report #1, 2020-4

RCLQRT-20V667-3524.PDF 211.133KB


⬇ Download PDF (206.18 KB)

 

Recall Quarterly Report #3, 2021-2

RCLQRT-20V667-6399.PDF 211.313KB


⬇ Download PDF (206.36 KB)

 

Recall Quarterly Report #2, 2021-1

RCLQRT-20V667-5172.PDF 211.233KB


⬇ Download PDF (206.28 KB)

 

Recall 573 Report – Amendment 1

RCLRPT-20V667-5732.PDF 213.436KB


⬇ Download PDF (208.43 KB)

 

Recall Acknowledgement

RCAK-20V667-7065.pdf 244.92KB


⬇ Download PDF (239.18 KB)

 

Recall Quarterly Report #4, 2021-3

RCLQRT-20V667-7559.PDF 211.42KB


⬇ Download PDF (206.46 KB)

 

Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V667&docType=RCL

 

 

Bestseller No. 1
Car Heat Sound Deadening Insulation Mat, - 394 Mil 10.8 Sqft Automobile Sound Deadening & Heat Insulation Material for Auto Hood Engine Roof Door and Trunk,40 Inch x 40 Inch, Aluminum Foil Finish
Car Heat Sound Deadening Insulation Mat, - 394 Mil 10.8 Sqft Automobile Sound Deadening & Heat Insulation Material for Auto Hood Engine Roof Door and Trunk,40 Inch x 40 Inch, Aluminum Foil Finish
  • Sound deadening material size: Nominal thickness 394 mils; Total coverage area of 10.8 sqft; Nominal sheet Size 40x40 inches. working Temperature Range: -40°F ~ 300°F
  • Heat Insulation and Vibration Deadener: Effectively blocks 98% of radiant heat transfer. Sound deadening mat is a very versatile insulation material with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensuring your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant!
  • Automotive self-adhesive insulation is a waterproof lightweight thermal deadener with a highly compressible closed-cell foam formulation, it absolutely doesn’t absorb moisture and has no odor
  • The sound dampening mat can be applied to external partitions, firewalls, hoods, engine compartments, engine compartments, trunks, wheel arches, body panels, load floors, and internal partitions under the seat floor.
  • The sound dampening material comes in handy size sheets which make it easier in terms of the cutting and installation process and it’s flexible which makes it easy to install with or without a roller.
$23.39
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 2
Storystore 394mil 16.5sqft Car Sound Deadening Mat, Heat & Noise Insulation
314 Reviews
Storystore 394mil 16.5sqft Car Sound Deadening Mat, Heat & Noise Insulation
  • Deadening Material: Heat sound deadening insulation mat is the high-performance car sound deadening material specifically for the automotive industry.Sound deadening effectively reduces noise and vibrations, providing a quieter and more comfortable driving experience for car enthusiasts
  • Suitable Size: Heat shield automotive has a nominal thickness of 394 mils and covers a total area of 16.5 square feet.With a nominal sheet size of 39x60 inches,sound matting for cars offers comprehensive coverage for various parts of your car
  • Heat and Noise Insulation: Auto sound deadening material effectively blocks of thermal radiation,keeping your vehicle cool in summer and warm in winter.Sound deadner provides outstanding heat isolation,protecting your car from engine heat, exhaust pipe heat,and other external sources,ensuring a comfortable and pleasant driving experience
  • Multi-Functional: Car sound deadening is a versatile sound dampening material suitable for external partitions,firewalls, engine compartments,wheel arches,body panels,load floors and interior partitions under seats,car insulation can fulfill all your needs
  • Easy Installation: Installing soundproofing material is quick and hassle-free.With just five simple steps,removal,cleaning,cutting,sticking and installation, you can easily apply this 10 mm automotive sound deadening material to your car's doors, hood, roof, trunk, and other areas without worrying about clearance issues
$29.99 −$3.00 $26.99
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 3
Heat Sound Deadening Insulation Mat - 394mil 16.36sqft Car Sound Deadening Material Mat,Auto Audio Deadener Foam for Hood Engine Roof Trunk (40x60inch-16.36sqft, 394mil)
187 Reviews
Heat Sound Deadening Insulation Mat - 394mil 16.36sqft Car Sound Deadening Material Mat,Auto Audio Deadener Foam for Hood Engine Roof Trunk (40x60inch-16.36sqft, 394mil)
  • Specifications - The car engine sound deadener measures approx. 40 inch x 60 inch/ 1 x 1.5m, Thickness: 394mil/10mmm, Total coverage area - 16.36sqft, working Temperature Range: -40°F ~ 300°F.
  • Outstanding insulation - Heat Sound Deadening Insulation Mat has excellent sound insulation and vibration absorption performance, reduce the vibration sound of the engine, the collision sound of the door, the noise outside the car, etc, giving you a quiet driving space and greatly improving driving comfort.
  • Heat Insulation Material - Sound dampening mat is made of high density closed cell foam, with waterproof Aluminum surface,so it can reflects and blocks most of the heat from the sun, machine or operation of the engine,reduce air conditioning energy consumption, saving fuel.
  • Easy to Cut and Install - our Sound deadening mat is Easy to cut and install,fit all kinds of vehicle type. this insulation foam is easy to cut, peel and apply,Self sticking backing & Waterproof,dustproof.
  • Widely used - Noise sound deadener can be applied to car roofs, hoods, firewalls, chassis, interior and exterior partitions, trunks,chassis, trunk, engine, seat and so on,Widely used in trucks, SUV, cars, boats and more.
$26.72
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 4
KILMAT 80 mil 36 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
KILMAT 80 mil 36 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
  • Very sticky self-adhesive 80 mil automotive butyl and foil sound deadening! It is user-friendly viable material suitable for DIY installation. KILMAT is really efficient and easy-to-install.
  • Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. The thicker the material the more performance you get!
  • Automotive self-adhesive insulation consists of butyl. KILMAT sound deadening has a total weight of 0.5 lbs/1sqft. This weight ensures optimum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. KILMAT 80 mil is light weighted sound deadening material!
  • Audio insulation KILMAT has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
$69.95
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 5
Car Heat Sound Deadening Insulation Mat, - 394 Mil 6.5 Sqft Automobile Sound Deadening & Heat Insulation Material for Auto Hood Engine Roof Door and Trunk,40 Inch x 24 Inch, Aluminum Foil Finish
Car Heat Sound Deadening Insulation Mat, - 394 Mil 6.5 Sqft Automobile Sound Deadening & Heat Insulation Material for Auto Hood Engine Roof Door and Trunk,40 Inch x 24 Inch, Aluminum Foil Finish
  • Sound deadening material size: Nominal thickness 394 mils; Total coverage area of 6.5 sqft; Nominal sheet Size 40x24 inches. working Temperature Range: -40°F ~ 300°F
  • Heat Insulation and Vibration Deadener: Effectively blocks 98% of radiant heat transfer. Sound deadening mat is a very versatile insulation material with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensuring your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant!
  • Automotive self-adhesive insulation is a waterproof lightweight thermal deadener with a highly compressible closed-cell foam formulation, it absolutely doesn’t absorb moisture and has no odor
  • The sound dampening mat can be applied to external partitions, firewalls, hoods, engine compartments, engine compartments, trunks, wheel arches, body panels, load floors, and internal partitions under the seat floor.
  • The sound dampening material comes in handy size sheets which make it easier in terms of the cutting and installation process and it’s flexible which makes it easy to install with or without a roller.
$14.99
Buy on Amazon Price incl. tax, excl. shipping

This product presentation was made with AAWP plugin.

BufferCopyFlipboardHacker NewsLinkedInMessengerMixPinterestPrintRedditSMSTelegramTumblrVKWhatsAppLineXing

Leave a Comment

Share to...
BufferCopyFlipboardHacker NewsLineLinkedInMessengerMixPinterestPrintRedditSMSTelegramTumblrVKWhatsAppXing