January 20, 2021 NHTSA CAMPAIGN NUMBER: 21V015000
Improperly Tightened Axle U-Bolts
If the axle moves, poor vehicle handling may result, increasing the risk of a crash.
NHTSA Campaign Number: 21V015
Manufacturer Keystone
RV Company
Components SUSPENSION
Potential Number of Units Affected 209
Summary
Keystone
RV Company (Keystone
) is recalling certain 2021 Crossroads Redwood 3401RL, 3901MB, 3901WB, 3911RL, 3951MB, 3951WB, 3981FK, 3991RD, 4001LK, 4150RD recreational trailers, built on D80 Dexter
Axles. The U-bolts on these axles may have been improperly torqued, causing the bolts to loosen and the axle to slide.
Remedy
Keystone
will notify owners, and dealers will properly tighten the U-bolts, free of charge. The recall began February 8, 2021. Owners may contact Keystone
customer service at 1-866-425-4369. Keystone
’s number for this recall is 21-394.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SEOCONTENT-START
PO Box 2000 – Goshen, IN 46527-2000
Phone: (574) 535-2100 – Fax: (574) 535-2199
www.keystonerv.com
Recall Population
2021 Redwood:
Models: 3401RL, 3901MB, 3901WB, 3911RL, 3951MB, 3951WB, 3981FK, 3991RD, 4001LK, 4150RD
Serial Number Range:
M9340030 – M9340238
Keystone
RV Company has decided that a defect which relates to motor vehicle safety exists in the vehicles listed above. As a result, Keystone
RV is conducting a safety recall. We apologize for any inconvenience this action may cause you; however your safety and continued satisfaction are of the utmost importance to us.
It has been decided that the vehicles in the recall population have a Dexter
axle using a substitute spring with U-bolts that were not properly torqued. Under certain conditions during travel, if the improperly torqued U-bolts come loose, there is an increased risk of the axle sliding back on the spring, which could result in poor vehicle handling and/or vehicle crash.
Keystone
representatives have been in contact with the staff at your selling dealership regarding this situation. The remedy is to torque the axle spring U-bolts to 110 ft lbs. The service and parts required for this corrective action will be provided at no charge to you.
Springs can be visually inspected to see if they are misaligned or if the U-bolts are loose. The U-bolt fasteners can be properly torqued to 110 ft lbs. As soon as possible, please make an appointment to have your RV serviced by your dealership. The labor time to perform this correction is approximately 1 hour. Please ask your dealer if you wish to know how much additional time will be needed to schedule and process your RV for this repair.
Your dealer is best equipped to obtain parts and provide service to ensure your RV is corrected as promptly as possible. Please contact Keystone
Customer service if your dealer is unable to assist or if you take your RV to your dealer on the agreed service date, and the dealer does not remedy the condition within a reasonable amount of time, or without charge to you. You may be eligible to receive reimbursement if you paid to have the defect resolved prior to receiving this correspondence. Keystone
Customer Service is available toll-free at 1-866-425-4369.
If after contacting Keystone
Customer Service you are still not satisfied we have done our best to remedy this situation, you may also submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590. You may call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153; or go to https://www.safercar.gov.)
Reason for this recall
What we will do
What we need you to do
If you have questions
RECREATIONAL VEHICLE SAFETY RECALL NOTICE
Safety Recall: 21V-015
Safety Advisory: 21-394
Transport Canada: 2021-015
February 8, 2021
***************************************************************************************************
PO Box 2000 – Goshen, IN 46527-2000
Phone: (574) 535-2100 – Fax: (574) 535-2199
www.keystonerv.com
IMPORTANT SAFETY RECALL
«Owner_name»
«Street»
«Street_2»
«City», «State» «Zip»
This notice applies to your vehicle: «VIN»
Dear «Owner_name»:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Keystone
RV Company has decided that a defect which relates to motor vehicle safety exists in certain model
2021 Redwood Fifth Wheels. As a result, Keystone
RV is conducting a safety recall. We apologize for any
inconvenience this action may cause you; however your safety and continued satisfaction are of the utmost importance
to us.
It has been decided that the vehicles in the recall population have a Dexter
axle using a substitute
spring with U-bolts that were not properly torqued. Under certain conditions during travel, if the
improperly torqued U-bolts come loose, there is an increased risk of the axle sliding back on the
spring, which could result in poor vehicle handling and/or vehicle crash.
Keystone
representatives have been in contact with the staff at your selling dealership regarding this
situation. The remedy is to torque the axle spring U-bolts to 110 ft lbs. The service and parts required
for this corrective action will be provided at no charge to you.
Springs can be visually inspected to see if they are misaligned or if the U-bolts are loose. The Ubolt
fasteners can be properly torqued to 110 ft lbs. As soon as possible, please make an appointment
to have your RV serviced by your dealership. The labor time to perform this correction is
approximately 1 hour. Please ask your dealer if you wish to know how much additional time will be
needed to schedule and process your RV for this repair.
Your dealer is best equipped to obtain parts and provide service to ensure your RV is corrected as
promptly as possible. Please contact Keystone
Customer service if your dealer is unable to assist or
if you take your RV to your dealer on the agreed service date, and the dealer does not remedy the
condition within a reasonable amount of time, or without charge to you. You may be eligible to
receive reimbursement if you paid to have the defect resolved prior to receiving this correspondence.
Keystone
Customer Service is available toll-free at 1-866-425-4369.
If after contacting Keystone
Customer Service you are still not satisfied we have done our best to remedy this situation,
you may also submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200
New Jersey Avenue, SE, Washington, DC 20590. You may call the toll-free Vehicle Safety Hotline at 1-888-327-
4236 (TTY: 1-800-424-9153; or go to https://www.safercar.gov.) Federal regulations require that any vehicle lessor
receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Thank you for your attention and cooperation in this matter.
Sincerely,
KEYSTONE
RV COMPANY
Rick Deisler
Vice President Service Operations
cc: National Highway Traffic Safety Administration (NHTSA)
Reason for
this recall
What we
will do
What we
need you to
do
If you have
questions
RECREATIONAL VEHICLE
SAFETY RECALL NOTICE
Safety Recall: 21V-015
Safety Advisory: 21-394
February 8, 2021
**********************************************************************************************
PO Box 2000 – Goshen, IN 46527-2000
Phone: (574) 535-2100 – Fax: (574) 535-2199
www.keystonerv.com
SAFETY ADVISORY 21-394
«Dealer_name»
ATTN: Service Manager
«Street»
«Street_2»
«City», «State» «Zip»
«Country»
Dear «Dealer_name»,
Keystone
RV Company has decided that a defect which relates to motor vehicle safety exists in certain model
2021 Redwood Fifth Wheels. As a result, Keystone
RV is conducting a safety recall.
It has been decided that the vehicles in the recall population have a Dexter
axle using a substitute
spring with U-bolts that were not properly torqued. Under certain conditions during travel, if the
improperly torqued U-bolts come loose, there is an increased risk of the axle sliding back on the
spring, which could result in poor vehicle handling and/or vehicle crash. The vehicles included in
the recall are:
2021 Redwood, Models: 3401RL, 3901MB, 3901WB, 3911RL, 3951MB,
3951WB, 3981FK, 3991RD, 4001LK, 4150RD
Serial Number Range: M9340030 – M9340238
Our records indicate unit(s) sold or in your present lot inventory fall within this range, which will require immediate
preventative action. Important: If some of the units are still in your inventory, Federal Law requires you to
complete the recall service on those units before retail delivery. The unit VIN(s) our records indicate are presently in
your inventory or have been sold are as follows:
«VIN1» «VIN2» «VIN3» «VIN4»
«VIN5» «VIN6» «VIN7» «VIN8»
«VIN9»
— Serial numbers with ‘*’ have been retail sold —
Claims for the units which have been serviced must be submitted. Claims submitted will be used by Keystone
to
record recall service completions and provide dealer payments. Enclosed is a copy of the Safety Advisory #21-394,
which details how to remedy the situation and the proper reimbursement procedures.
We apologize for any inconvenience this situation may cause and greatly appreciate your cooperation. Should you
have any questions or concerns regarding this correspondence or the enclosed Safety Advisory, please feel free to
contact us.
Sincerely,
KEYSTONE
RV COMPANY
Rick Deisler
Vice President Service Operations
cc. National Highway Traffic Safety Administration (NHTSA)
cc. Transport Canada
Reason for
this recall
RECREATIONAL VEHICLE
SAFETY RECALL NOTICE
Safety Recall: US: 21V-015
CAN: 2021-015
Safety Advisory: 21-394
February 8, 2021
SEOCONTENT-END
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| KEYSTONE | CROSSROADS REDWOOD | 2021 |
12 Associated Documents
Manufacturer Notices(to Dealers,etc)
RCMN-21V015-8585.pdf 119.165KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V015-6558.pdf 92.865KB
Manufacturer Notices(to Dealers,etc)
Miscellaneous Document – 21-394 Redwood Dexter
8K Axles – Web
Miscellaneous Document – 21-394 tweet screenshot
Recall Quarterly Report #1, 2021-1
RCLQRT-21V015-8852.PDF 211.128KB
Recall Quarterly Report #2, 2021-2
RCLQRT-21V015-5973.PDF 211.231KB
Remedy Instructions and TSB
RCRIT-21V015-1624.pdf 270.345KB
Recall Acknowledgement
RCAK-21V015-9735.pdf 244.867KB
Defect Notice 573 Report
RCLRPT-21V015-6241.PDF 215.288KB
Recall Quarterly Report #3, 2021-3
RCLQRT-21V015-4278.PDF 211.314KB
Recall Quarterly Report #4, 2021-4
RCLQRT-21V015-1775.PDF 211.426KB
Latest Recalls Documents
- 89" Hubface 74" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter
, AL-KO, Hayes
, and Lippert
Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
- Compatibility. Trailer axle kit for 3,500lb cargo trailer, 73" hubface - 58" spring center(reference from P2), impressive support to wheels and shock absorbent for RV camper
, pack with spring, U-bolt, hanger and shackle kit for replacement.1 - Trailer Axle Parts Oulet. Maximum distance between spring center is 18'', between hubface is 14'', 5 bolt on 4.5 pattern trailer hub, replace the axle with prominent steel-made, provide better support to thefor 3500 lbs cargo trailer.
- Trailer Leaf Spring. Confirm the measurement for sure fit, eye to eye length: 25-1/4 inch; free open: 3 inch; width of leaf: 1-3/4 inch; 4 leaves; 9/16 inch bushing dia, OEM reference: SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184.
- Includes. Tandem trailer leaf spring kit included compatible 4 U-bolts feature 5-1/2'' long, 1/2'' dia, 2 tie plates and 8 hex nuts, 4 hangers, 4pcs 3-1/8" shackle straps and necessary locknuts and shackle bolts for one package easy replacement.
- Durability. Trailer axle springs constructed with prominent steel with anti-corrosion coating, DOT qualified hardware and accessories improve the suspension system for long time and long distance journey in years.
- 73" Hubface 58" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter
, AL-KO, Hayes
, and Lippert
Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
- 73" Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side
- 58" Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side
- Package include: 3500 lbs Trailer Axle with 5-Lug 4.5'' Hubs
- Widely used: Suitable for all light trailers, including trailer axle, boat trailer axle, car trailer axle, ATV trailer axle, lawn and landscape trailer axle, motorcycle trailer axle, cargo trailer axle, enclosed trailer axle, RV trailer axle, etc
- Any questions after receiving Trailer Axle Kit , please contact us freely
- 85" Hubface 70" Spring Center / 5x4.5 Bolt Pattern | Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- Internal Components: 3.5k (3500 lb Capacity) Bearing Kit, 3.5k TK Axle Hub - 5 lug Brake, 3.5k TK Axle Beam - 3.5k Tube, 3.5k TK Axle Studs - 1/2"
- How to Measure Your Idler Trailer Axle - Hubface: Measure from one face of hub (where the studs start coming out of hub) to the face of hub on opposite side. Spring Center: Measure from center of one spring seat, to the center of spring seat on opposite side (see image in gallery for more details).
- High Strength Straight Steel Axle Tube Construction - Ensures even tire wear and a better highway experience | Underslung - Axle is welded with spring seats on the bottom. Allows for lower ride height. For optimal usage, use with double eye springs. | EZ Lube Design - Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Replaces Dexter
, AL-KO, Hayes
, and Lippert
Axles. Design for use on Light Duty Trailers: Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Motorcycle, BBQ Pit, Cargo, Enclosed, RV & More
Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.



