February 12, 2021 NHTSA CAMPAIGN NUMBER: 21V070000
3-Point Seat Belt Seats Installed Incorrectly
An incorrectly installed seat can increase the risk of injury in the event of a crash.
NHTSA Campaign Number: 21V070
Manufacturer Blue Bird Body Company
Components SEAT BELTS
Potential Number of Units Affected 619
Summary
Blue Bird Body Company (Blue Bird) is recalling certain 2020-2022 Vision and All American buses. The seats with integrated 3-point seat belts may have been installed incorrectly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, “Seat Belt Assembly Anchorages.”
Remedy
Blue Bird will notify owners, and dealers will inspect the seats and install any missing hardware, as necessary, free of charge. The recall is expected to begin April 9, 2021. Owner notification letters were mailed February 03, 2022. Owners may contact Blue Bird customer service at 1-478-822-2242. Blue Bird’s number for this recall is R21BB-SB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
RECALL
R21BB – Installation of Floor Tracks with 3-Point Seats
Models Affected: Certain 2019 – 2022 model year busses with 39” or 45”, 3-point seats installed on longitudinal floor track
Issue: On some affected buses, fasteners used to secure the floor track may be missing reinforcement plates, resulting in a non-compliance with FMVSS 210, Seat Belt Assembly Anchorages
Corrective Action: Inspect each floor track joint for correct fastener installation, install new fastener(s) if necessary.
WARNING: Always follow all Federal, State, Local and Shop safety standards and use proper safety equipment, and thoroughly read and understand all instructions before performing these procedures.
Park bus on level surface, apply parking brake, turn off ignition key, and chock wheels.
NOTE: This procedure outlines the process for one section of floor track. This process must be followed for every section or joint of floor track installed in the bus.
Inspection Instructions:
Locate the beginning and ending point of the floor track. Located within 1” of the ends of the floor track (item 1) will be capscrews (item 3). From the underside of the unit, inspect for installation of reinforcement plate (item 5), reference illustration 1.
NOTE: Capscrews, nuts and plates are installed within 1” from each end of the track or at a track joint. Magnabulb rivets (item 2) are installed on 2” centers in all other positions
- If fasteners are installed per illustration, no further work is required. Place bus back into service.
- If fasteners are not installed per illustration, proceed to repair instructions.
Repair Instructions:
1. At each end of the floor track (item 1), locate and remove the existing allen head screw (item 3) and nut (item 4). These may be discarded
2. Install new allen screw (item 3), plate (item 5), and nut (item 4) per illustration 1 and torqued to 8-10 FT – LBS
NOTE: When capscrew location falls out on top of an auxiliary crossmember use 4” capscrew 01666106
Items Needed:
| Item | Part Number | Name | Quantity Required |
| 1 | 10039024 | Track, Aluminum | Reference only |
| 2 | 00106565 | Fastener, Huck, .31 Blind, Magnabulb | Reference only |
| 3 | 01467323
01666106 | Screw, Allen Head, ¼-20 x 1.5, Countersunk, Flathead
Capscrew, Flathead, ¼-20 x 4 (required thru Aux Crossmember) | As Needed |
| 4 | 00659979 | Nut, Hex, Flange, Ser, ¼-20, Black Zinc | As Needed |
| 5 | 01726389 | Plate, Underfloor | As Needed |
R21BB
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 21V-070 (School Bus)
DATE: April 9, 2021
SUBJECT: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
Dear Blue Bird Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your bus(es) identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. If you no longer own the subject bus(es), please complete the appropriate section of the yellow cover sheet and return to Blue Bird in the enclosed pink postage prepaid envelope.
Blue Bird Body Company is voluntarily recalling the following:
- Certain model year 2019 to 2022 Blue Bird Vision School Buses
- manufactured from January 15, 2019 through January 26, 2021
- Certain model year 2020 to 2022 All American School Buses
- manufactured from February 8, 2019 through December 18, 2020
On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 210, Seat Belt Anchorages.
Blue Bird shall conduct a voluntary safety recall to correct this noncompliance. The seat installation on subject buses must be inspected and corrected according to the Blue Bird recall instructions, if found to be installed incorrectly. Blue Bird evaluated the risk to motor vehicle safety related to this noncompliance and determined that, in the event of an accident, there is an increased risk of injury in a crash to the occupant if these 3-point seat belt seats are installed incorrectly.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at [email protected] Parts will be available April 16, 2021.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the vehicle owner. Repair Options and allowable labor times for this campaign are one of the outlined as follows:
- Repair A (1-4 Fasteners)
- 0.4 hours (24 minutes)
- Repair B (5-8 Fasteners)
- 0.8 hours (48 minutes)
- Repair C (9-12 Fasteners)
- 0.2 hours (72 minutes)
- Repair D (13-16 Fasteners)
- 1.6 hours (96 minutes)
Administering the Recall:
Blue Bird recommends that you contact your local or nearest Blue Bird Dealer to arrange for this recall to be performed. The Dealer can perform the repairs, or arrange for repairs to be performed by a service repair facility authorized by the Dealer. However, you may elect to perform this recall yourself or pay another independent repair facility to perform this recall. A qualified technician should perform this recall. If you elect to perform this recall yourself or pay another independent repair facility to perform this recall, complete and submit the Pink Owner’s Recall Reply Sheet provided. The Recall Reply Sheet includes a section for the owner to request reimbursement of the owner’s labor or to request reimbursement for a labor invoice paid by the owner to an independent repair facility.
Parts to complete Recall R21BB will be available April 16, 2021.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If the modifications directed by this notification were performed on your bus prior to the receipt of this recall notification, attach a copy of the work order/invoice. Mail the documents in the pink self-addressed postage prepaid envelope included with the pink reply sheet to Blue Bird for warranty consideration. Reimbursements will be made in accordance with the requirements of the National Highway Transportation Safety Act, Title 49 Code of Federal Regulations, Parts 573 and 577.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
If Blue Bird Body Company should fail to or is unable to remedy this condition without charge to you, you may contact:
ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, D.C. 20590
Or, you may call The National Highway Traffic Safety Administration toll free at: 1-888-327-4236 TTY 1-800-424-9153 or go to: http:/www.safercar.gov
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 21V-070 (School Bus)
| DATE: | April 9, 2021 |
| TO: | U.S. DEALERS |
| SUBJECT: | R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks |
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your buses identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the attached yellow cover sheet.
Blue Bird Body Company is voluntarily recalling the following:
- Certain model year 2019 to 2022 Blue Bird Vision School Buses
- manufactured from January 15, 2019 through January 26, 2021
- Certain model year 2020 to 2022 All American School Buses
- manufactured from February 8, 2019 through December 18, 2020
On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 210, Seat Belt Anchorages.
Blue Bird shall conduct a voluntary safety recall to correct this noncompliance. The seat installation on subject buses must be inspected and corrected according to the Blue Bird recall instructions, if found to be installed incorrectly. Blue Bird evaluated the risk to motor vehicle safety related to this noncompliance and determined that, in the event of an accident, there is an increased risk of injury in a crash to the occupant if these 3-point seat belt seats are installed incorrectly.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected dealers and owners and will provide inspection and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at [email protected] Parts will be available April 16, 2021.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the Dealer or to the vehicle owner. Repair Options and allowable labor times for this campaign are one of the outlined as follows:
- Repair A (1-4 Fasteners)
- 0.4 hours (24 minutes)
- Repair B (5-8 Fasteners)
- 0.8 hours (48 minutes)
- Repair C (9-12 Fasteners)
- 0.2 hours (72 minutes)
- Repair D (13-16 Fasteners)
- 1.6 hours (96 minutes)
Administering the Recall:
Parts to complete Recall R21BB will be available April 16, 2021.
If Blue Bird’s records indicate bus(es) subject to this recall were delivered in your service area, a list of affected bus(es) will be enclosed. The bus(es) will be identified by Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. Dealers should verify correct owners and assure that complete mailing and shipping addresses are provided for each listed owner.
It is the Dealer’s responsibility to verify that the correct owner name, address, and telephone number is provided for each listed vehicle. Any corrections or updates should be made in ClaimsCenter. Addresses that cannot be updated should be forwarded to the Recall Administrator.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Dealers are reminded of their responsibilities under Section 154 of The National Traffic and Motor Vehicle Safety Act of 1991. Dealers are required to complete modifications on units in their inventory before delivering to the final owner. Reference Blue Bird Body Company Distributor Memo No. 42-92.
If you have in your possession or have sold a bus that was purchased from another Dealer that may be affected by this recall, please notify Lisa Hancock at 478-822-2242 or [email protected] Questions regarding this recall campaign should be directed to Lisa Hancock, as well.
Sincerely,
Lisa Hancock
Corporate Recall Administrator
Blue Bird Corporation
3920 Arkwright Road, Suite 200, Macon, Georgia 31210
Phone 478.822.2242
[email protected]
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
SEOCONTENT-START
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
SECOND FINAL NOTICE
DATE: February 8, 2022
TO: Blue Bird Owners
Subject: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
According to our records, Campaigns Administration has not received confirmation that the above referenced recall, dated April 9, 2021, has been completed. A copy of Recall R21BB is attached. Your buses affected by Recall R21BB are identified by Blue Bird body number and VIN under Section 2 on the enclosed cover sheet.
If this is the first time you received notification of Recall R21BB, please read the enclosed notification carefully. Recall R21BB must be completed, as soon as possible. To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at [email protected]
Labor Reimbursement:
Repair Options and allowable labor times for this campaign are one of the outlined as follows:
Repair A (1-4 Fasteners)
o 0.4 hours (24 minutes)
Repair B (5-8 Fasteners)
o 0.8 hours (48 minutes)
Repair C (9-12 Fasteners)
o 1.2 hours (72 minutes)
Repair D (13-16 Fasteners)
o 1.6 hours (96 minutes)
If you have already had R21BB performed on your affected buses, please complete and mail the enclosed recall yellow coversheet to us in the enclosed postage paid pink reply envelope so we may update our recall records. Be sure the reply sheet is filled out properly.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
Thank you for your prompt attention to this matter.
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 21V-070 (School Bus)
DATE: April 9, 2021
SUBJECT: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
Dear Blue Bird Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your bus(es) identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. If you no longer own the subject bus(es), please complete the appropriate section of the yellow cover sheet and return to Blue Bird in the enclosed pink postage prepaid envelope.
Blue Bird Body Company is voluntarily recalling the following:
Certain model year 2019 to 2022 Blue Bird Vision School Buses
o manufactured from January 15, 2019 through January 26, 2021
Certain model year 2020 to 2022 All American School Buses
o manufactured from February 8, 2019 through December 18, 2020
On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 210, Seat Belt Anchorages.
Blue Bird shall conduct a voluntary safety recall to correct this noncompliance. The seat installation on subject buses must be inspected and corrected according to the Blue Bird recall instructions, if found to be installed incorrectly. Blue Bird evaluated the risk to motor vehicle safety related to this noncompliance and determined that, in the event of an accident, there is an increased risk of injury in a crash to the occupant if these 3-point seat belt seats are installed incorrectly.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at [email protected] Parts will be available April 16, 2021.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the vehicle owner. Repair Options and allowable labor times for this campaign are one of the outlined as follows:
Repair A (1-4 Fasteners)
o 0.4 hours (24 minutes)
Repair B (5-8 Fasteners)
o 0.8 hours (48 minutes)
Repair C (9-12 Fasteners)
o 1.2 hours (72 minutes)
Repair D (13-16 Fasteners)
o 1.6 hours (96 minutes)
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
Blue Bird Body Company R21BB
Page 2
Administering the Recall:
Blue Bird recommends that you contact your local or nearest Blue Bird Dealer to arrange for this recall to be performed. The Dealer can perform the repairs, or arrange for repairs to be performed by a service repair facility authorized by the Dealer. However, you may elect to perform this recall yourself or pay another independent repair facility to perform this recall. A qualified technician should perform this recall. If you elect to perform this recall yourself or pay another independent repair facility to perform this recall, complete and submit the Pink Owner’s Recall Reply Sheet provided. The Recall Reply Sheet includes a section for the owner to request reimbursement of the owner’s labor or to request reimbursement for a labor invoice paid by the owner to an independent repair facility.
Parts to complete Recall R21BB will be available April 16, 2021.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If the modifications directed by this notification were performed on your bus prior to the receipt of this recall notification, attach a copy of the work order/invoice. Mail the documents in the pink self-addressed postage prepaid envelope included with the pink reply sheet to Blue Bird for warranty consideration. Reimbursements will be made in accordance with the requirements of the National Highway Transportation Safety Act, Title 49 Code of Federal Regulations, Parts 573 and 577.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
If Blue Bird Body Company should fail to or is unable to remedy this condition without charge to you, you may contact:
ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, D.C. 20590
Or, you may call The National Highway Traffic Safety Administration toll free at:
1-888-327-4236 TTY 1-800-424-9153 or go to: http:/www.safercar.gov
1
RECALL R21BB – Installation of Floor Tracks with 3-Point Seats
Models Affected: Certain 2019 – 2022 model year busses with 39” or 45”, 3-point seats installed on longitudinal floor track
Issue: On some affected buses, fasteners used to secure the floor track may be missing reinforcement plates, resulting in a non-compliance with FMVSS 210, Seat Belt Assembly Anchorages
Corrective Action: Inspect each floor track joint for correct fastener installation, install new fastener(s) if necessary.
WARNING: Always follow all Federal, State, Local and Shop safety standards and use proper safety equipment, and thoroughly read and understand all instructions before performing these procedures.
Park bus on level surface, apply parking brake, turn off ignition key, and chock wheels.
NOTE: This procedure outlines the process for one section of floor track. This process must be followed for every section or joint of floor track installed in the bus.
Inspection Instructions:
Locate the beginning and ending point of the floor track. Located within 1” of the ends of the floor track (item 1) will be capscrews (item 3). From the underside of the unit, inspect for installation of reinforcement plate (item 5), reference illustration 1.
NOTE: Capscrews, nuts and plates are installed within 1” from each end of the track or at a track joint. Magnabulb rivets (item 2) are installed on 2” centers in all other positions
If fasteners are installed per illustration, no further work is required. Place bus back into service.
If fasteners are not installed per illustration, proceed to repair instructions.
Repair Instructions:
1. At each end of the floor track (item 1), locate and remove the existing allen head screw (item 3) and nut (item 4). These may be discarded
2. Install new allen screw (item 3), plate (item 5), and nut (item 4) per illustration 1 and torqued to 8-10 FT – LBS
NOTE: When capscrew location falls out on top of an auxiliary crossmember use 4” capscrew 01666106
Items Needed:
Item
Part Number
Name
Quantity Required
1
10039024
Track, Aluminum
Reference only
2
00106565
Fastener, Huck, .31 Blind, Magnabulb
Reference only
3
01467323
01666106
Screw, Allen Head, ¼-20 x 1.5, Countersunk, Flathead
Capscrew, Flathead, ¼-20 x 4 (required thru Aux Crossmember)
As Needed
4
00659979
Nut, Hex, Flange, Ser, ¼-20, Black Zinc
As Needed
5
01726389
Plate, Underfloor
As Needed
Illustration 1
*******************************************************************************************************
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
FINAL NOTICE
DATE: September 14, 2021
TO: Blue Bird Owners
Subject: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
According to our records, Campaigns Administration has not received confirmation that the above referenced recall, dated April 9, 2021, has been completed. A copy of Recall R21BB is attached. Your buses affected by Recall R21BB are identified by Blue Bird body number and VIN under Section 2 on the enclosed cover sheet.
If this is the first time you received notification of Recall R21BB, please read the enclosed notification carefully. Recall R21BB must be completed, as soon as possible. To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at [email protected]
Labor Reimbursement:
Repair Options and allowable labor times for this campaign are one of the outlined as follows:
Repair A (1-4 Fasteners)
o 0.4 hours (24 minutes)
Repair B (5-8 Fasteners)
o 0.8 hours (48 minutes)
Repair C (9-12 Fasteners)
o 1.2 hours (72 minutes)
Repair D (13-16 Fasteners)
o 1.6 hours (96 minutes)
If you have already had R21BB performed on your affected buses, please complete and mail the enclosed recall yellow coversheet to us in the enclosed postage paid pink reply envelope so we may update our recall records. Be sure the reply sheet is filled out properly.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
Thank you for your prompt attention to this matter.
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 21V-070 (School Bus)
DATE: April 9, 2021
SUBJECT: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
Dear Blue Bird Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your bus(es) identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. If you no longer own the subject bus(es), please complete the appropriate section of the yellow cover sheet and return to Blue Bird in the enclosed pink postage prepaid envelope.
Blue Bird Body Company is voluntarily recalling the following:
Certain model year 2019 to 2022 Blue Bird Vision School Buses
o manufactured from January 15, 2019 through January 26, 2021
Certain model year 2020 to 2022 All American School Buses
o manufactured from February 8, 2019 through December 18, 2020
On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 210, Seat Belt Anchorages.
Blue Bird shall conduct a voluntary safety recall to correct this noncompliance. The seat installation on subject buses must be inspected and corrected according to the Blue Bird recall instructions, if found to be installed incorrectly. Blue Bird evaluated the risk to motor vehicle safety related to this noncompliance and determined that, in the event of an accident, there is an increased risk of injury in a crash to the occupant if these 3-point seat belt seats are installed incorrectly.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at [email protected] Parts will be available April 16, 2021.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the vehicle owner. Repair Options and allowable labor times for this campaign are one of the outlined as follows:
Repair A (1-4 Fasteners)
o 0.4 hours (24 minutes)
Repair B (5-8 Fasteners)
o 0.8 hours (48 minutes)
Repair C (9-12 Fasteners)
o 1.2 hours (72 minutes)
Repair D (13-16 Fasteners)
o 1.6 hours (96 minutes)
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
Blue Bird Body Company R21BB
Page 2
Administering the Recall:
Blue Bird recommends that you contact your local or nearest Blue Bird Dealer to arrange for this recall to be performed. The Dealer can perform the repairs, or arrange for repairs to be performed by a service repair facility authorized by the Dealer. However, you may elect to perform this recall yourself or pay another independent repair facility to perform this recall. A qualified technician should perform this recall. If you elect to perform this recall yourself or pay another independent repair facility to perform this recall, complete and submit the Pink Owner’s Recall Reply Sheet provided. The Recall Reply Sheet includes a section for the owner to request reimbursement of the owner’s labor or to request reimbursement for a labor invoice paid by the owner to an independent repair facility.
Parts to complete Recall R21BB will be available April 16, 2021.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If the modifications directed by this notification were performed on your bus prior to the receipt of this recall notification, attach a copy of the work order/invoice. Mail the documents in the pink self-addressed postage prepaid envelope included with the pink reply sheet to Blue Bird for warranty consideration. Reimbursements will be made in accordance with the requirements of the National Highway Transportation Safety Act, Title 49 Code of Federal Regulations, Parts 573 and 577.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
If Blue Bird Body Company should fail to or is unable to remedy this condition without charge to you, you may contact:
ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, D.C. 20590
Or, you may call The National Highway Traffic Safety Administration toll free at:
1-888-327-4236 TTY 1-800-424-9153 or go to: http:/www.safercar.gov
1
RECALL R21BB – Installation of Floor Tracks with 3-Point Seats
Models Affected: Certain 2019 – 2022 model year busses with 39” or 45”, 3-point seats installed on longitudinal floor track
Issue: On some affected buses, fasteners used to secure the floor track may be missing reinforcement plates, resulting in a non-compliance with FMVSS 210, Seat Belt Assembly Anchorages
Corrective Action: Inspect each floor track joint for correct fastener installation, install new fastener(s) if necessary.
WARNING: Always follow all Federal, State, Local and Shop safety standards and use proper safety equipment, and thoroughly read and understand all instructions before performing these procedures.
Park bus on level surface, apply parking brake, turn off ignition key, and chock wheels.
NOTE: This procedure outlines the process for one section of floor track. This process must be followed for every section or joint of floor track installed in the bus.
Inspection Instructions:
Locate the beginning and ending point of the floor track. Located within 1” of the ends of the floor track (item 1) will be capscrews (item 3). From the underside of the unit, inspect for installation of reinforcement plate (item 5), reference illustration 1.
NOTE: Capscrews, nuts and plates are installed within 1” from each end of the track or at a track joint. Magnabulb rivets (item 2) are installed on 2” centers in all other positions
If fasteners are installed per illustration, no further work is required. Place bus back into service.
If fasteners are not installed per illustration, proceed to repair instructions.
Repair Instructions:
1. At each end of the floor track (item 1), locate and remove the existing allen head screw (item 3) and nut (item 4). These may be discarded
2. Install new allen screw (item 3), plate (item 5), and nut (item 4) per illustration 1 and torqued to 8-10 FT – LBS
NOTE: When capscrew location falls out on top of an auxiliary crossmember use 4” capscrew 01666106
Items Needed:
Item
Part Number
Name
Quantity Required
1
10039024
Track, Aluminum
Reference only
2
00106565
Fastener, Huck, .31 Blind, Magnabulb
Reference only
3
01467323
01666106
Screw, Allen Head, ¼-20 x 1.5, Countersunk, Flathead
Capscrew, Flathead, ¼-20 x 4 (required thru Aux Crossmember)
As Needed
4
00659979
Nut, Hex, Flange, Ser, ¼-20, Black Zinc
As Needed
5
01726389
Plate, Underfloor
As Needed
Illustration 1
SEOCONTENT-END
6 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| BLUE BIRD | ALL AMERICAN | 2020-2022 |
| BLUE BIRD | VISION | 2020-2022 |
12 Associated Documents
Recall Quarterly Report #1, 2021-2
RCLQRT-21V070-7705.PDF 211.141KB
Recall Acknowledgement
RCAK-21V070-4937.pdf 645.751KB
Noncompliance Notice 573 Report
RCLRPT-21V070-7290.PDF 215.936KB
Recall 573 Report- Amendment 1
RCLRPT-21V070-9149.PDF 215.938KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V070-3968.pdf 803.24KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V070-6121.pdf 859.681KB
Remedy Instructions and TSB
RCRIT-21V070-1483.pdf 456.49KB
Recall 573 Report- Amendment 2
RCLRPT-21V070-4596.PDF 215.942KB
ISSUED Renotification Notice
RCRN-21V070-4471.pdf 1880.809KB
Recall Quarterly Report #2, 2021-3
RCLQRT-21V070-9843.PDF 211.237KB
Recall Quarterly Report #3, 2021-4
RCLQRT-21V070-6729.PDF 211.325KB
ISSUED Renotification Notice
RCRN-21V070-6685.pdf 1880.808KB
Latest Recalls Documents
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
- ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
- OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
- ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
- WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota
, Ford, Honda, Chevrolet, Nissan, Dodge, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.
, 
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- 【Full Systems Automotive Diagnostic】 More than checking engine, ABS and SRS, OBDMATE OM970 obd2 scanner performs comprehensive diagnostics on all electric modules. It quickly scans and clears fault codes, turns off warning lights, reads live data, and features Auto-VIN technology.
- 【Live Datastream&4-in-1 Graph】 Easily view live sensor data such as RPM, fuel trims, ATF temperature, wheel speed sensor, battery voltage and so on. OM970 scan tool also supports 4-in-1 trend graphing. Spend just 3 minutes to check – and you'll know exactly what's going wrong, helping you avoid hundreds in dealership diagnostic fees.
- 【One-Click I/M Readiness&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether your vehicle's emissions-related systems are operating properly. Help you get smog-check ready quickly. OM970 obd2 diagnostic tool supports all essential OBD2 functions you need. Plus, it features battery voltage test and DLC 16-PIN test.
- 【Straightforward Menus with Easy Navigation】 All functions are easy to understand without obscure decriptions. 3.5" Large screen delivers clear readings while keeping one-hand operation. The car diagnostic tool comes with a silicone protective case and a hard-shell carrying case, ensuring long-lived durability and drop resistance.
- 【Budget-Friendly, No Subscriptions, Free Software Updates】 Plug and play: no bluetooth pairing, monthly fees, Wi-Fi connection, or any other troublesome initial settings. OM970 obd2 scanner works out of the box with the latest software. Lifetime free upgrade.
- ✔️【Professional SRS Reset for 1994-2003 BMW】 Designed specifically for classic BMW models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW built before 1994 or after 2003.
- ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
- ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
- ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
- ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
This product presentation was made with AAWP plugin.