February 24, 2021 NHTSA CAMPAIGN NUMBER: 21V112000
Flywheel Capscrews Not Tightened Properly
A detached flywheel can cause loss of drive power, increasing the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, increasing the risk of injury.
NHTSA Campaign Number: 21V112
Manufacturer Navistar
, Inc.
Components ENGINE
Potential Number of Units Affected 7
Summary
Navistar
, Inc. (Navistar
) is recalling certain 2021 International
LT vehicles equipped with a Cummins
X15
engine. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach.
Remedy
Navistar
will work with the engine manufacturer Cummins
Inc. to notify owners, and Cummins
dealers will properly tighten the capscrews and inspect for possible damage, repairing any damage found, free of charge. The recall began on March 29, 2021. Owners may contact Navistar
customer service at 1-800-448-7825.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
*** IMPORTANT SAFETY RECALL***
NHTSA Recall No. 21E009
Cummins
Campaign #C2402
March 29, 2021
Dear Cummins
Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Cummins
Inc. has decided that a defect which relates to motor vehicle safety exists in certain ISX Engines that were manufactured between October 27, 2020 and January 11, 2021.
This notice applies to your engine(s) listed in the table on the enclosed list.
WHY IS A RECALL BEING CONDUCTED?
The engine flywheel may be susceptible to detaching from the crankshaft, leading to loss of motive power, which may increase the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, which may increase the risk of personal injury.
WHAT ARE WE DOING ABOUT THE PROBLEM?
Cummins
has released field Safety Campaign #C2402 “ISX15
CM2250 SN and X15
CM2450 X124B/X154B Flywheel Capscrew Retorque Safety Campaign” to correct this condition by properly torqueing the subject capscrews and inspecting for possible damage and, if necessary, repairing the damage. This campaign is currently available at Cummins
Distributors and authorized Warranty Dealers. The repair will be completed free of charge and most applications will require approximately nine hours to complete.
WHAT SHOULD YOU DO?
Contact the nearest Cummins
Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine. The distributor or dealer will work with you to schedule the best date to complete this repair.
Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact your local Cummins
Distributor or authorized warranty dealer. You may also contact Cummins
Care at 1-800CUMMINS (1-800-286-6467), or visit our website at care.cummins
.com.
If you have a complaint relative to this recall, you may report it to the following:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
If you have not registered your Cummins
product, please complete the enclosed registration card or register your product at https://prodreg.cummins
.com/prodreg/#/webform/contactInfo.
If you are no longer the owner of the engine or vehicle listed in the table below, please forward this notice to the new owner or provide the new owner’s contact information to Cummins
so that we can notify them of this recall.
Cummins
is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Campaign Administrator Cummins
Inc.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| INTERNATIONAL | LT | 2021 |
3 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-21V112-0566.pdf 520.203KB
Recall Acknowledgement
RCAK-21V112-9910.pdf 645.223KB
Defect Notice 573 Report
RCLRPT-21V112-9726.PDF 214.186KB
Latest Recalls Documents
- ✅【Compatible With】 DOFOCH HE400VG Turbo Turbocharger For Cummins
X15
5459710 5459710RX 5358453 5358452 - ✅【OEM Part number】5459710, 5459710RX, 5358001RX, 5358454, 5358001, 5458936, 5458936H, 5458936HX, 5358452, 5351486, 5454978, 5454976, 5454977, 5358453, 5351489, 5351490, 5351491
- ✅【Features】The advantages of turbochargers are increased engine power; improved fuel economy and reduced fuel consumption; high reliability, good matching characteristics and high transient response characteristics
- ✅【Material】Cast iron turbochargers excel in high temperature resistance, strength, and longevity. The manufacturing process is also more mature and more suitable for high-performance vehicles
- ✅【Buy with Confidence】 DOFOCH offers a one-year guarantee on our turbocharger. If you have any questions, please tell us at any time. Please check the Turbo Model, Turbo Part Number and OEM Part Number on your turbo to make sure it's the right one for your engine
- 【FITMENT】Compatible with ISX ISM ISX15
X15
PACCAR
MX13. - 【REPLACEMENT】Replace for LF14000NN Lube Filter; FF5776 Fuel Filter; FS19727 Fuel Water Separator Filter .
- 【SUGGESTION】Please replace the filter regularly.If the filter element is not replaced for a long time, it will aggravate the mechanical wear.
- 【WARRANTY】12-Month Warranty and Lifetime Support.Please feel free to contact us when you have any suggestions for our products.
- 【NOTE】We provide replacement parts,not original parts.
- Great Compatibility — This front crankshaft seal installer & remover works for Cummins
ISX12 & ISX15
(CM2250,CM2350) and X15
(CM2350, CM2450) with single overhead cam. NOT work on the early dual overhead camshaft ISX engines. - Front Crank Seal Install & Removal — This isx12 engines front crank seal replacement tool is used for installation and removal of front crankshaft seal and wear sleeve without damaging the seal, it credibly prevents the seal from leaking.
- Superior Quality — This ISX15
front crankshaft seal installer is constructed with heat-treated steel with black or silver finish, which is great strength, rust-resistance and durable to use. No worries break or crack during the operation. - What You Get — 3x Regular Hexagon Nut; 2x Hexagon Flange Head Capscrew; 3x Stud; 1x Replacer Plate; 6x Self Tapping Metal Screw; 3x Round Spacer; 3x Hexagon Spacer; 3x Plain Washer
- Satisfaction Guarantee – We stand behind our product 4918991 Front Crankshaft Front Seal & Wear Sleeve Remover Installer, with a 30-day-return for money-back guarantee and 12-month warranty, giving you peace of mind during the crank seal replacement on ISX12 ISX15

- Liner Press Installer Tool Alternative to OEM # 3164606, ST-269. Supersedes 3162461
- 6434 Sleeve Height and Counter Bore Gauge Measuring Range: 0-1" | Graduations: 0.001" | Reading: 0-100. Includes 4374 – Dial Indicator, 4375 – Base, 4377 – Flat Contact, 4378 – Pointed Contact
- 3164606 Cylinder Liner Press Installer Tool fits for Cummins
ISX X15
Liner Press - 6434 Sleeve Height and Counter Bore Gauge for All Diesel Engines
- The package includes: Cylinder Liner Press Installer Tool and 6434 Sleeve Height & Counter Bore Gauge
- 【Fitment】 Compatible with Peterbllt/Kenworth
/WesternStar/International
trucks, only suitable for model with Cummins
X15
XPl engine. - 【Replace OE Number】 5417366 5679573 4974922. Please check fitment information before purchase.
- 【High-Quality Materials】 Made of high-quality materials to withstand harsh engine conditions. Features efficient filtration, meets strict QC standards, comparable to OEM reliability.
- 【Easy to Replace】 No modifications required. This crankcase breather assembly installs just like the original part, saving you time and labor costs during replacement. Perfect for professional mechanics and DIY repairs.
- 【24-Month Warranty】 It is our mission to provide our customers with satisfactory services and products, if you have any problems in installing and using the crankcase breather, please contact us via Amazon mail in time, we will provide you with suitable solutions.
Last update on 2026-05-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





