May 4, 2021 NHTSA CAMPAIGN NUMBER: 21V313000
High Pressure Fuel Rail Assembly May Leak Fuel
A fuel leak in the presence of an ignition source increases the risk of a fire.
NHTSA Campaign Number: 21V313
Manufacturer Blue Bird Body Company
Components FUEL SYSTEM, DIESEL
Potential Number of Units Affected 134
Summary
Blue Bird Body Company (Blue Bird) is recalling certain 2018-2022 All American vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Remedy
The remedy for this recall is still under development. Owner notification letters were mailed on July 30, 2021. Owners may contact Blue Bird customer service at 1-478-822-2242. Blue Bird’s number for this recall is R21BH-NSB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NHTSA Recall No. 21E-032
Fuel Rail Assembly Inspection and Repair Procedure: External Fuel Leaks
Technical Service Bulletin: TSB210113
*** IMPORTANT SAFETY RECALL***
NHTSA Recall No. 21E-032
Interim Recall Notice
June 18, 2021
Dear Cummins
Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain Cummins L9 and ISX12 engines manufactured between January 2, 2017 and October 16, 2020 and installed in buses, school buses, emergency vehicles and recreational vehicles.
This notice applies to the engines in your vehicles listed on the enclosed table.
WHAT IS THE PROBLEM?
The fuel rail assembly may develop leaks, which may result in an undetected prolonged diesel fuel spray. The operator may see or smell diesel fuel and, in some cases, the check engine lamp may illuminate. A leak involving spraying/misting fuel in the presence of an ignition source may increase the risk of fire.
WHAT WILL CUMMINS DO?
Cummins is currently developing the permanent remedy for this issue. You will receive a second notification to inform you when the final remedy is available and to provide instructions to schedule the recall for your engine.
WHAT SHOULD YOU DO?
In the meantime, Cummins advises you to periodically check the fuel rails for signs of leaking and seek repairs if leaks are identified. If a leak occurs, the operator may see or smell diesel fuel and, in some cases, the check engine lamp may illuminate.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800- CUMMINS (1-800286-6467) or visit our website at care.cummins.com.
If you have a complaint relative to this recall, you may report it to the following:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
If you have not registered your Cummins product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo.
If you are no longer the owner of the vehicle listed on the enclosed table, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall.
Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.
Cummins is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Campaign Administrator
Cummins Inc.
5 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| BLUE BIRD | ALL AMERICAN | 2018-2022 |
7 Associated Documents
Recall 573 Report- Amendment 1
RCLRPT-21V313-1321.PDF 214.682KB
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-21V313-6374.pdf 362.932KB
Remedy Instructions and TSB
RCRIT-21V313-9854.pdf 1729.629KB
Defect Notice 573 Report
RCLRPT-21V313-1989.PDF 214.564KB
Recall Acknowledgement
RCAK-21V313-7623.pdf 645.159KB
Recall Quarterly Report #2, 2021-4
RCLQRT-21V313-9046.PDF 211.243KB
Recall Quarterly Report #1, 2021-3
RCLQRT-21V313-0565.PDF 211.145KB
Latest Recalls Documents
- [Wide Compatibility Heavy Duty Truck Scanner] Compatible with a wide range of 12V & 24V heavy-duty trucks across North America, including major truck brands such as Freightliner, Peterbilt, Kenworth, International, Volvo, and Western Star, with support for common diesel engines from Cummins, Detroit, and PACCAR. Whether you're an owner-operator, fleet manager, or repair technician, HD601 helps simplify routine inspections, preventive maintenance, and everyday fault checks. Vehicle coverage may vary by model year, system, and configuration
- [Full-System Diagnostic Truck Scanner] This heavy duty diagnostic scanner supports full-system diagnostics for heavy-duty trucks, including Engine, Transmission, ABS, and more.It helps quickly identify faults, pinpoint problem areas, troubleshoot faster, and understand which systems need attention before repairs. Compatible light-duty vehicles support OBD2 diagnostics only
- [DTC Library + Live Data] This truck diagnostic scanner's built-in DTC library helps truck drivers, DIY users, and more quickly understand fault information. You can also manually enter standard SPN and FMI codes to look up fault details. For roadside situations without internet access, it helps identify possible problem areas
- [2-in-1 Heavy Duty & OBDII Diagnostics] This heavy duty scanner supports both HDOBD and OBDII diagnostics. It provides essential functions including Quick Scan, Full Scan, Live Data, Freeze Frame Data, Fault Code Reading and Clearing, and more. It supports HDOBD protocols such as J1939 and J1587/J1708 for reliable vehicle communication
- [Supports Multiple Vehicle Types] Suitable for various commercial vehicles, including heavy-duty trucks, semi-trucks, buses, and more. This truck scanner diagnostic tool features 6/9/16-pin connectors to support common vehicle interfaces, making it suitable for different vehicle applications and transportation needs
- Boost DPF Performance For Smooth Truck Operation: Facing power loss, weak acceleration or constant DPF warning lights? The DPF regen scan tool offers forced DPF regeneration, DPF Reset, and DPD/DPR functions to clear soot buildup, recover engine output and keep exhaust aftertreatment working properly. Detect DPF‑related errors fast, reduce downtime, and prolong your diesel particulate filter lifespan. Vehicle compatibility varies. Please verify before purchase.
- Full-System Diagnostics with Real-Time Live Data: This truck scanner diagnostic tool covers Engine, ABS, Transmission, SRS, SAS, TPMS and other core vehicle systems. Read & clear fault codes, access live data stream, freeze frame, I/M readiness, DTC lookup and additional practical functions. Leverage real‑time data to quickly locate faults and support reliable repair judgements.
- 7+ Resets ‑ Perform Essential Service Procedures: The heavy duty diagnostic tool comes with 7+ professional service resets. It supports DPF Regen for soot removal, Oil Reset to erase service reminders, Injector Coding for new injectors, DEF Test, Speed Limit Adjustment, Cylinder Cutout for weak cylinder detection, Clutch Relearn for improved clutch engagement. Run these resets after service or component replacement to keep your truck working properly. Available functions vary by vehicle model.
- One Professional heavy duty scanner for 50+ Truck Brands: Compatible with J1939, J1708, J1587, and OBD2/CAN protocols this semi truck scanner delivers wide coverage for mainstream diesel trucks and commercial vehicles. Supported brands include Cummins, Detroit, Caterpillar, Paccar, Volvo, Freightliner, Kenworth, Peterbilt, International, Mack, Isuzu, Hino, Scania, Mercedes-Benz, and more. This single diesel diagnostic scanner lets you service more vehicles and cut down tool investment costs.
- Expert Remote Diagnostic Support: Faced with unexpected truck breakdowns? Equipped with built‑in TeamViewer and tech‑to‑tech support, this diesel truck scanner enables secure real‑time remote connection with professional technicians for diagnosis and troubleshooting. Share live vehicle data and send diagnostic feedback for quicker technical analysis to get expert guidance, no on‑site service required. Minimize downtime, prevent unnecessary repairs and get your truck back on the road sooner.
- BROAD VEHICLE & ENGINE COVERAGE: Professional heavy duty truck scanner for trucks, buses, medium-duty vehicles, construction and agricultural equipment. Supports major brands including Freightliner, Kenworth, Peterbilt, Mack, International, Volvo, Hino and Isuzu, plus Cummins, Detroit, PACCAR, Caterpillar and International A26 engines. J1939/J1708 support covers newer and legacy commercial vehicles. Verify coverage before purchase
- DPF REGEN & DEF/SCR: Diagnose supported diesel aftertreatment systems with DPF regeneration, soot load, differential pressure, exhaust temperature, NOx sensor and DEF level data. Helps identify DPF blockage, excessive soot, DEF/SCR faults, warning lights and derate-related issues, providing key data for faster aftertreatment diagnosis and service
- BIDIRECTIONAL ACTIVE TESTS: Go beyond code reading with two-way component testing. Command and monitor supported injectors, EGR/VGT actuators, cooling fans, fuel pumps and relays to help verify operation. Cylinder cut-off testing helps identify misfires, cylinder contribution and injector-related issues, reducing unnecessary parts replacement
- 40+ DIESEL SERVICE FUNCTIONS: Focused on high-frequency shop tasks including oil reset, injector coding, speed limiter adjustment and idle speed adjustment. Additional service and reset functions support chassis and other routine maintenance needs. Speed and idle adjustments remain within supported manufacturer parameters
- INDUSTRIAL-GRADE DUAL-CHIP HARDWARE: Quad-core 2.0 GHz processor and automotive-grade communication MCU support smooth multitasking and reliable vehicle communication. Wireless VCI offers up to 10 m Bluetooth connectivity. An 8-inch high-brightness display supports glove-friendly use
- Diagnose Heavy-Duty Truck Problems Fast — Read and clear fault codes and diagnose warning light issues on many Class 4–8 diesel trucks including Freightliner, Peterbilt, Kenworth, Volvo, Mack and Cummins-powered vehicles
- Help Reduce Downtime & Repair Costs — It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Quickly check engine faults, view live truck data and identify issues before expensive repair shop visits or unnecessary repairs
- No complicated setup required — Simple menus and built-in DTC explanations make this truck code reader easy to use for owner-operators, mobile mechanics and small fleet maintenance
- Live Data & Built-in DTC Lookup — View real-time engine data and built-in truck fault code definitions directly on the scanner to help understand vehicle problems faster without searching through manuals
- Free Lifetime Updates & Technical Support — Includes free software updates plus responsive technical support for setup, compatibility and everyday truck diagnostics
- HANDLE MORE HEAVY-DUTY JOBS WITH ONE SCANNER — The ANCEL X7HD PRO brings full-system diagnostics, HDOBD/OBD2 diagnostics, 42+ service functions, bi-directional controls, and ECU coding into one heavy-duty scan tool. Built for diesel technicians, repair shops, and fleet maintenance teams that need one scanner for everyday diagnostics, service, active tests, and post-repair work
- TAKE ON 42+ SERVICE & RESET JOBS IN-HOUSE — Perform supported DPF regeneration, injector coding, oil reset, throttle adaptation, EPB reset, ABS bleeding, idle/speed adjustment, and more. Handle more routine maintenance and service work in your own shop or fleet yard instead of relying on a dealer or separate tools for every job
- COMMAND COMPONENTS & CHECK THEIR RESPONSE — Bi-directional control lets you command supported components such as injectors, cooling fans, throttle actuators, and ABS-related systems, then check how they respond. Use active tests to narrow down a problem before tearing things apart or replacing parts, helping you troubleshoot based on actual component behavior instead of fault codes alone
- CODE & MATCH MODULES AFTER REPLACEMENT — Perform supported ECU coding, module matching, adaptations, and relearn procedures when replacing compatible components or control modules. Complete more post-repair setup with the same scanner and help ensure replacement modules are properly configured to communicate with the vehicle
- DIAGNOSE MORE SYSTEMS ACROSS A MIXED FLEET — Read and clear codes, view live data and freeze frame information, and access supported systems including Engine, Transmission, ABS, and Body. Coverage includes compatible Freightliner, Kenworth, Peterbilt, Volvo, Mack, and International trucks; Cummins, Caterpillar, Detroit, PACCAR, and Navistar engines; plus supported OBD2/HDOBD vehicles—giving multi-brand shops and fleets broader coverage from one tool
This product presentation was made with AAWP plugin.