July 13, 2021 NHTSA CAMPAIGN NUMBER: 21V528000
Rear LED Lights Too Bright/FMVSS 108
The excessive brightness may affect the vision of other drivers, increasing the risk of a crash.
NHTSA Campaign Number: 21V528
Manufacturer Summit Bodyworks
Components EXTERIOR LIGHTING
Potential Number of Units Affected 1
Summary
Summit Bodyworks is recalling one 2017 Freightliner
M2-106 vehicle. The all-in-one rear LED lights may be too bright, exceeding the maximum light output allowed which may adversely affect the vision of drivers. As such, this vehicle fails to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Summit Bodyworks will notify the owner, and provide instructions on how to obtain a filter kit from the light manufacturer, free of charge. The owner notification letter were mailed on September 15, 2021. Owners may contact Summit Bodyworks’ customer service at 1-303-348-2681.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
IMPORTANT SAFETY RECALL NOTICE: 21V528
July 15, 2021
Dear SBW Vehicle Owner,
This notice applies to your vehicle, VIN: 1FVACWD
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Why is a recall being conducted?
Summit Bodyworks has decided that identified replacement equipment, in the case of notification sent by a replacement equipment manufacturer fails to conform to Federal Motor Vehicle Safety Standard number 108; Lamps, reflective devices, and associated equipment.
Summit bodyworks has determined that the installed Code 3 7×9 combination LED stop, tail, turn, reverse lights, (part number 79STTRBZ) exceed the maximum permissible candela levels specified in FMVSS 571.108 at certain test points. The increased photometric intensity does not comply with the requirements of FMVSS 571.108 and may adversely affect the vision of following drivers, increasing the risk of a vehicle crash without warning.
What are we doing about the problem?
In order to remedy this defect you are being instructed via this letter to contact the supplier, Code 3 (208-395-8023), and obtain a filter kit free of charge. The filter kit part number is: CZ0199. Installation of the filter kit will ensure that the lamps perform within the permissible photometric intensity ranges. All of the subject lamps are covered under the manufacturer’s warranty/goodwill program. The filter kit is currently available from the supplier. Other than the filter kit, no additional modifications need to be made to bring these lights into compliance with FMVSS 571.108. The owner of the vehicle can install the filter kit or can call Summit Bodyworks and we will arrange for a technician to install the filter kit for them. The estimated time for the remedy is 0.5 hours.
If you require further assistance with this notification please call Summit Bodyworks customer service at (303) 301-7550.
INCLUDED WITH THIS LETTER IS AN OWNER RESPONSE CARD TO BE FILLED OUT AND RETURNED TO SUMMIT BODYWORKS. After the repair has been completed please fill out the appropriate information on the owner response postcard and return it to:
MAIL: SUMMIT BODYWORKS, 13525 County Road 8, Fort Lupton, CO 80621
EMAIL: [email protected]
Fax: (303) 288-2847
If you are no longer the owner of this vehicle please provide us with any contact information so that we may contact the current owner.
If you have already paid to have your vehicle repaired for this issue, you may be eligible for reimbursement of the charges you paid for the repair or replacement components. To learn more about what you need to do to obtain reimbursement, contact our customer service department at (303) 301-7550.
If after having attempted to take advantage of this recall you believe you have not been able to have your vehicle remedied without charge and within a reasonable timeframe, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safecar.gov.
We apologize for any inconvenience this safety recall may cause you, but your safety is of our utmost concern.
Sincerely,
Summit Bodyworks
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| FREIGHTLINER | M2 | 2017 |
4 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-21V528-1651.PDF 214.618KB
Recall Acknowledgement
RCAK-21V528-1329.pdf 645.718KB
Miscellaneous Document- Recall Return Card
RMISC-21V528-0358.pdf 52.995KB
Owner Notification Letter(Part 577)
RCONL-21V528-7438.pdf 84.789KB
Latest Recalls Documents
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind
- Verify fitment: Navigate to the Amazon Confirmed Fit tool at the top of the page (desktop) or under the images (mobile). Plug in your vehicle info and check the bulb fitment location to ensure this product will work for your needs
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs
- LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- Excellent Lighting: With a color temperature of 3000K and a brightness of 54lm, this 3157 taillight bulb provides even and stable light, significantly improving visibility when braking. Its 360-degree lighting effect ensures that the surrounding environment is fully illuminated, and the non-flickering light effectively improves night driving safety
- Quartz Glass Material: High temperature resistant, impact resistant, compact in size, with good light transmission and light gathering effect, and featuring a waterproof design that adapts to humid environments for long-term stable lighting, this rear turn signal bulb made of quartz glass meets diversified needs
- Product Parameters: Rated at 12V, with 21W power, 3000K color temperature, 54lm lumen, and a service time of about 500 hours, this break light bulb replacement model 3157 comes in a pack of 10 for daily use. Please verify compatibility with your model before purchasing
- Non-destructive Installation: Designed with a standard plug for easy installation, causing no CAN-Bus error codes or bulb flickering, and preserving the car’s original control circuit system, this 3157 halogen bulb ensures stable operation with its good thermal conductivity and heat dissipation
- Widely Universal: Used as a tail light, side marker light, brake light and instrument light for most types of vehicles such as cars, SUVs, trucks and more, this automotive brake bulb has a wide range of applications and is an ideal universal automotive lighting accessory
- Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
- Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb, yet several times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
- Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
- Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
Last update on 2026-05-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.