July 1, 2021 NHTSA CAMPAIGN NUMBER: 21V505000
Mount Couplers May Cause Trailer to Uncouple
Excessive play of the mount coupler can cause the trailer to uncouple, increasing the risk of a crash.
NHTSA Campaign Number: 21V505
Manufacturer Bwise Manufacturing
Components EQUIPMENT
Potential Number of Units Affected 2,786
Summary
Bwise Manufacturing (Bwise) is recalling certain 2021-2022 Utility, Car Hauler
, Dump, Tilt and Equipment trailers equipped with Wallace Forge medium-duty adjustable mount couplers. The coupler may experience excessive play due to a missing .750″ radius piece.
Remedy
Dealers will replace the coupler, free of charge. Owner notification letters were mailed on September 10, 2021. Owners may contact Bwise’s customer service at 1-717-261-0922.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
SERVICE ALERT BULLETIN
Alert Subject: R25160 Wallace Forge Adjustable Coupler
Recall 21V505 (Wallace Forge Recall 21E-051)
Problem Description:
Certain 2021 and 2022 BWise and Bri-Mar Trailers manufactured with adjustable couplers may potentially have couplers with excessive play when coupled with a 2 5/16” ball hitch. The suspect couplers are labeled Wallace Forge R25160
Containment:
1) For specific trailers shown on the list attached, identify the coupler by looking at the part number stamping located on the side of the coupler (pictured above)
2) If the coupler part number matches the suspect units (R25160 Wallace Forge), then evaluate the coupler to confirm the presence of the correct internal locking mechanism per the method below.
3) Internal Locking Mechanism Visual Inspection:
INCORRECT LOCKING MECHANISM INTERNAL LOCK IS STRAIGHT
CORRECT LOCKING MECHANISM INTERNAL LOCK HAS A RADUIS
4) All units that are confirmed to have a coupler with the incorrect internal locking mechanism should have the coupler replaced. Contact [email protected] to initiate coupler replacement. The trailer VIN number will be required.
Coupler Replacement Instructions:
Tools Required:
Impact Wrench – ½” Drive
Socket 15/16” x ½” Drive
Wrench 15/16” – Open or Box
Torque Wrench – ½” Drive
Adequate PPE (Personal Protective Equipment)
Preparing the Trailer:
Removing and Replacing the Coupler:
- Position replacement coupler in the channel
SEOCONTENT-START
6/1/2021 Coupler Recall Notice Models: R25160 – 20,000 lb. Adjustable Ball Coupler This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. The Wallace Forge Company, Inc. has decided that certain models of 20,000 lb. ball couplers, Part Number R25160 (Adjustable) has excessive play when coupled with a 2-5/16” ball hitch, and in extreme conditions could cause the trailer to become uncoupled, increasing the risk of a crash. This issue involves couplers shipped between 12/15/2020 and 5/1/2021. We are notifying you because our records indicate your company purchased one of these models during this time frame. The reason for this recall is the internal locking mechanism on the coupler does not meet correct specifications. WHAT SHOULD YOU DO? Because not all of the parts listed above are defective, the below photos illustrate a correct, and incorrect internal locking mechanism. If you are unable to visually identify whether your coupler has the correct or incorrect internal locking mechanism, please contact Wallace Forge for additional assistance. In the event that the coupler contains the defective locking mechanism, please contact us at 1-800-328-1203, or [email protected], and we can provide you with the parts to switch out the internal locking mechanism, or give you instructions for returning the coupler, and we will provide you a replacement. Both options will be offered at no charge to you, the customer. The inspection and replacement may take approximately (6 months).QUESTIONS? If you have questions regarding this recall, please contact Wallace Forge at 1-800-328-1203 or [email protected] . If you are unable to obtain a remedy without charge within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.Your safety and continued satisfaction is of the utmost importance to us. We sincerely apologize for any inconveniences this issue has caused you, and thank you for your prompt attention to this matter. Sincerely, The Wallace Forge Company
SAFETY RECALL NOTICE NHTSA RECALL 21E-051
INCORRECT LOCKING MECHANISM
INTERNAL LOCK IS STRAIGHT
CORRECT LOCKING MECHANISM
INTERNAL LOCK HAS A RADIUS
INCORRECT CORRECT CORRECT INCORRECT
*************************************************************************************************
TRAILERS
/V(/ll;ptlie-C,vise-Owice- IMPORTANT SAFETY RECALL
This notice applies to your motor vehicle equipment
VIN
Date: September 10, 2021
Safety Recall Number: 21V505
—-
Subject: 2021 and 2022 BWise Trailers, Multiple Models
Dear BWISE Trailer Owner:
This notice is being sent to you in accordance with the requirements of the National Traffic and Motor
Vehicle Safety Act.
BWise Manufacturing, LLC (BWise), has decided that a defect, which relates to motor vehicle safety,
exists in certain 2021 and 2022 BWise Trailers. Based on information supplied by the Wallace Forge
Company as part of NHTSA Recall 21E-051 excessive play in the coupler in extreme conditions could
cause the trailer to become uncoupled, increasing the risk of personal injury or property damage.
Your trailer has been identified as one that is included in this recall. You are advised not to use the trailer
for any purpose and to immediately contact BWISE for the authorized BWise dealer closest to you.
You can schedule the required inspection and potential coupler replacement ( only performed if the
inspection fails) once you have been provided with the authorized dealer information. Please contact
BWISE Warranty Team by phone at (717) 261-0922 OPT 2; or by email at [email protected]
immediately.
The defect will be remedied by your authorized BWISE dealer or representative by inspecting the coupler.
If the inspection fails (i.e., there is excessive play in the coupler) the dealer will replace the coupler. The
inspection will take approximately 5 minutes to perform and if the inspection fails, the coupler will be
replaced, which will take about 0.25 hour to complete. However, additional time may be required
depending on how dealer appointments are scheduled and processed. To make the appointment to schedule
the necessary inspection and potential coupler replacement, which will be performed at no charge to
you, please do the following:
Call BWISE Manufacturing, LLC at (717) 261-0922 OPT 2; or by email at [email protected] for
the location of your closest BWISE dealer, or authorized representative, who will perform the inspection
and potential coupler replacement. You should call the same number if you have any problem obtaining
the needed repair. DO NOT USE THE TRAILER FOR ANY PURPOSE.
1002 Wayne Avenue• Chambersburg, PA 17201 www.bwisetrailers.com
If you had the coupler replaced before you received this letter, you may be eligible to receive
reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this
recall. For more information contact BWISE at (717) 261-0922 OPT 2; or by email at
[email protected]
Upon completion of the necessary inspection and potential coupler replacement, the dealer or BWISE
authorized representative will notify BWISE Manufacturing, LLC that your trailer has been inspected and
if it required the coupler to be replaced or not
If you no longer own the subject trailer, please provide BWISE with the new owner’s information (if
known), either by mail to the address listed above, via email [email protected]. If the new owner
information is unknown, simply notify BWISE that you no longer own the subject trailer.
If you believe that BWISE Manufacturing, LLC has failed or is unable to remedy the potential defect
without charge within a reasonable time, you may submit a complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, S.E.
Washington, DC 20590
or call the toll-free Vehicle
Safety Hotline at 1-888-327-4236
(TTY: 1-800-424-9153); or go to
http:/www.safercar.gov
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this
notice to the lessee within ten days.
We regret any inconvenience, which this action may cause you. This program is being carried out to
ensure your safety.
Your prompt attention to this important matter is appreciated.
Sincerely,
BWISE Manufacturing, LLC
1002 Wayne Avenue• Chambersburg, PA 17201 www.bwisetrailers.com
*
*
*
*
*
*
*
***************************************************************************************************************SEOCONTENT-END
10 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| BWISE | CAR HAULER | 2021-2022 |
| BWISE | DUMP TRAILER | 2021-2022 |
| BWISE | EQUIPMENT TRAILER | 2021-2022 |
| BWISE | TILT TRAILER | 2021-2022 |
| BWISE | UTILITY TRAILER | 2021-2022 |
5 Associated Documents
Defect Notice 573 Report
RCLRPT-21V505-3401.PDF 214.777KB
Miscellaneous Document – Copy of ONL re Coupler Recall Notice
RMISC-21V505-0646.pdf 748.512KB
Remedy Instructions and TSB
RCRIT-21V505-3319.pdf 844.16KB
Recall Quarterly Report #2, 2021-4
RCLQRT-21V505-4302.PDF 211.227KB
Owner Notification Letter(Part 577)
RCONL-21V505-7447.pdf 826.619KB
Latest Recalls Documents
- HEAVY-DUTY TOWING CAPACITY: Securely tow up to 15,000 lbs with our 2-5/16" hitch ball and 20,000 lbs rated channel bracket. This solid one-piece formed steel construction provides the ultimate strength needed for hauling heavy equipment, large boats, and utility trailers without worrying about connection failure
- 5-POSITION VERSATILE ADJUSTABILITY: Tired of unlevel towing? The 11-3/4" channel bracket features 5 distinct height adjustment positions. This allows you to perfectly align your trailer with different vehicle hitch heights, ensuring a stable, level, and safe towing experience across multiple setups
- ALL-WEATHER RUST PROTECTION: Our coupler kit is finished with a premium black powder coating, specifically designed to resist corrosion, rain, and road salt. Unlike basic hitches that rust quickly, this durable finish extends the service life, making it a reliable choice for long-term outdoor use
- EFFORTLESS INSTALLATION & WELDABLE: Featuring a standard 2-inch on-center bolt pattern, this kit offers a straightforward bolt-on setup for quick DIY installation. For those seeking a permanent, commercial-grade solution, the high-quality steel is also fully weldable to meet your specific structural needs
- STABLE & SECURE CONNECTION: The spring-loaded mechanism ensures a tight, rattle-free fit around the hitch ball, reducing swaying and bouncing during transport. It’s the ideal problem-solver for mismatched vehicle-trailer heights, providing peace of mind for off-road gear and motorhome towing
- EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer (CURT channels #48610 and #48650 recommended, sold separately)
- PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-5/16-inch diameter trailer ball
- EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball
- HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 14,000 lbs. gross trailer weight and 2,100 lbs. tongue weight
- CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat
- 15,000 LBS HEAVY-DUTY RATING Rated for a massive 15,000 lbs capacity, this 2-5/16" cast steel coupler is engineered for high-stress towing. It provides a secure connection for large equipment trailers, flatbeds, and heavy machinery transport.
- ADJUSTABLE CHANNEL MOUNT DESIGN Features a channel-mount configuration that allows for precise height customization. This versatility ensures your trailer remains perfectly level across different towing vehicles, from heavy-duty trucks to farm tractors.
- SECURE SLEEVE-LOCK MECHANISM The advanced sleeve-lock design, combined with an included safety pin, provides dual-layer security. This system maintains a tight, rattling-free grip on the 2-5/16" hitch ball during long-distance hauling and off-road use.
- DURABLE POWDER-COATED FINISH Constructed from high-strength cast steel with a uniform black powder-coated surface. This industrial finish is designed for high outdoor durability and maintains its functional integrity in harsh construction and agricultural environments.
- COMPLETE INSTALLATION HARDWARE KIT Includes all necessary mounting bolts and hardware for a hassle-free setup. It is a preferred upgrade for owners looking to replace noisy pintle rings with a smoother, more secure ball-mount coupling system.
- 15,000 lb Heavy-Duty Capacity – Cast steel construction handles extreme loads for industrial and commercial trailers.
- 3-Position Adjustable Channel – Versatile height adjustment with 3" inner channel width (2" hole centers).
- Easy-Lock Latching System – Smooth operation with secure locking to prevent accidental release.
- Durable Powder Coated Finish – Black coating resists rust, road salt, and weather damage.
- Complete Ready-to-Use Kit – Includes all necessary hardware for quick installation.
- HIGH-CAPACITY TOWING PERFORMANCE: Engineered for serious hauling, this 2-5/16 inch trailer coupler supports up to 15,000 lbs, making it the perfect upgrade for heavy-duty equipment trailers, livestock haulers, and large boats. The solid one-piece formed steel construction ensures a secure, dependable connection that exceeds expectations for commercial-grade durability
- VERSATILE 3-POSITION ADJUSTABILITY: Eliminate trailer height mismatch with our 7-1/2 inch channel bracket featuring three distinct adjustment positions. This allows you to easily level your trailer with various vehicle hitch heights, ensuring a stable towing experience and preventing dangerous swaying when switching between different trucks or SUVs
- WEATHER-RESISTANT DURABILITY: Finished with a premium black powder coating, this kit is specifically designed to resist rust, salt, and corrosion. Whether you are launching a boat in freshwater or hauling equipment through snowy winter roads, the protective finish and spring-loaded mechanism maintain smooth, reliable operation over years of outdoor exposure
- EFFORTLESS DIY INSTALLATION: Featuring a standard 2-inch on-center bolt pattern, this kit is designed for a quick and straightforward bolt-on setup that requires no specialized tools. For those seeking a permanent commercial mounting solution, the high-quality steel is fully weldable, offering the flexibility to fit your specific trailer frame needs
- STABLE & VIBRATION-FREE CONNECTION: The precision-engineered spring-loaded design provides a tight grip on the hitch ball, effectively solving common problems like rattling, bouncing, or loose connections during transport. It offers a professional-grade towing solution for DIY enthusiasts who want premium performance without the premium brand price tag
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





