July 26, 2021 NHTSA CAMPAIGN NUMBER: 21V567000
Solenoid Corrosion May Hinder Fire Fighting
A loss of power to the pump control module can cause a loss of water pressure for fighting fires, increasing the risk of injury.
NHTSA Campaign Number: 21V567
Manufacturer Marion Body Works Inc.
Components ELECTRICAL SYSTEM, EQUIPMENT
Potential Number of Units Affected 52
Summary
Marion Body Works Inc. is recalling certain 2009-2021 Gladiator and MetroStar emergency vehicles. The pump shift solenoid may corrode internally, causing a loss of power to the pump control module.
Remedy
Dealers will replace the solenoids, free of charge. Owner notification letters were mailed on August 13, 2021. Owners may contact Marion Body Works customer service at 1-715-754-5261. Marion Body Works number for this recall is 21V-329.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Solenoid Corrosion may Hinder Fire Fighting – 2009-2021 Spartan Fire Gladiator & MetroStar Emergency Vehicles
http://oemdtc.com/6219/solenoid-corrosion-may-hinder-fire-fighting-2009-2021-spartan-fire-gladiator-metrostar-emergency-vehicles
26 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
SPARTAN FIRE | GLADIATOR | 2009-2021 |
| SPARTAN FIRE | METROSTAR | 2009-2021 |
4 Associated Documents
Recall Acknowledgement
RCAK-21V567-4362.pdf 646.183KB
Defect Notice 573 Report
RCLRPT-21V567-1642.PDF 213.807KB
Recall 573 Report- Amendment 1
RCLRPT-21V567-9413.PDF 213.809KB
Recall 573 Report- Amendment 2
RCLRPT-21V567-4024.PDF 213.848KB
Latest Recalls Documents
- Robust, durable design for high performance carts
- Rated at 400 Amp continuous, 1,000 Amp peak (suitable for 500-600 Amp controllers)
- Will activate from 48 Volts
- Integrated mounting bracket
- 5/16" (8mm) High amperage circuit posts with double nuts - 5/32" (4mm) Activation circuit posts with solderless ring terminals included
- Contacts:Normally Open (NO)/ Flat Base Metal Case / 10-32 Terminal
- 3 Pole Battery Isolation Solenoid, 12VDC With 2 Copper Point,Housing plated Steel Case / 180Flat mounting bracket./ Mounting holes: 5/16 x 19/32, 2-13/64 on centers.
- Our Coil Roll is using 180℃ Copper. Max Current Above 200amp/ Rate Current: 100A / Our Cover is Environmental Plating,Sealed Unit Protects Solenoid From The Elements Helping Prevent Corrosion
- if be Continuous Duty,can work 5 minutes under 150Amp, but NEED BREAK otherwise will be too hot to burned or fired
- Note:It is a starter solenoid, work in the process of started. recommend hold time is 5 minutes, must need a cool rest time for the next start. /If u need a long working one, pls note us.
- Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT
- Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight;Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center
- Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining.Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp.
- Warning:the using power do not exceed 5N, or it may case the inside plastic part broken which may let the product be stucked.
- Note: It is a starter solenoid, work in the process of started. recommend hold time is 5 minutes, must need a cool rest time for the next start. /If u need a long working one, pls note us.
- Part Number: MZJ-400A
- Compatible with Heavy Duty Golf Cart
- Mounting Hole Diameter: 6mm / 0.24, Thread Size: M10 x 1.5
- Package Included: MZJ-400A Contactor Solenoid x 1
- It Is a Replacement Part, Not Original Part. But It Can Work Good For You
- ✦ 【Specification】4-pole battery isolation solenoid valve: Voltage: 12VDC; Resistance: 14Ω; Capacity: 10.2W; Maximum transient flash current: 300Amp; but Working Current recommend under 150 Amp,Bracket:Straight;Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center
- ✦ 【Materials】4 Terminal Max 300A 12 Volt With 2 Copper Point Duty Solenoid Relay ,The The electromagnetic relay adopts high-quality components, Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment.The Nickel-Plating outer layer and the inside of the canned coil, suitable for use in any environment.
- ✦ 【Replaces Parts Number】This Duty Solenoid Relay Replacement For 70-111224, 3635820, 1114208, 1114218, 1114223, 1114534, 1114547
- ✦ 【Function 】good saver to your battery ( Max Flash Current 300A). Copper Terminal Contactor Improve Electricity - Reduce The Power Loss,Reach Transient Current 300A; Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp. Continuous Work is 5 minutes, must cool down in 20 seconds.
- 【Note】Usually with 80Amp as working current, need Break off 20 seconds after 5 minutes Continuous working.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.