August 29, 2021 NHTSA CAMPAIGN NUMBER: 21V672000
Adhesive failure may cause the vent portion of the window to detach, increasing the risk of a crash or injury.
NHTSA Campaign Number: 21V672
Manufacturer Gracie Ind. LLC d/b/Bolt Custom Trucks
Components STRUCTURE, EQUIPMENT
Potential Number of Units Affected 340
Summary
Gracie Ind. LLC d/b/Bolt Custom Trucks (Bolt Custom Trucks) is recalling certain 2018-2021 Custom Sleepers trucks equipped with Lippert
Hehr 6400 Series windows. The adhesive that bonds the vented portion of the window may fail.
Remedy
Dealers will inspect the windows, and replace the vent if necessary, free of charge. Owner notification letters were mailed on October 15, 2021. Owners may contact Bolt Custom Trucks’ customer service at 260-748-0314.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
INSTRUCTIONS FOR INSPECTING AND REPLACING WINDOW VENTS, IF NEEDED. PLUS, INSTRUCTIONS FOR SUBMITTING CLAIMS TO LIPPERT FOR REIMBURSEMENT OF INSPECTION AND REPAIR TIME, IF APPLICABLE.
NHTSA Safety Recall: 21V672
INSPECTION PER WINDOW ALLOTED TIME = .4 HOURS PER TRUCK
VENT REPLACEMENT PER WINDOW ALLOTED TIME = .5 HOURS PER VENT
INVOICE MAILED TO LIPPERT COMPONENTS – Email = [email protected]
LIPPERT CUSTOMER SERVICE PH: 574-538-4514 if there are questions about filing a claim.
Information below that Lippert Requires to be on an invoice / claim submitted reimbursement:
Truck Complete 17 digit unit VIN
Bolt Custom Truck’s or AA Truck Sleeper date of manufacture of the Sleeper – This can be obtained by viewing the sleeper’s ID tag which is shown on the inside of cargo door. Or, can be obtained by contacting Bolt Custom Trucks at Ph: 260-748-0314 or Email: [email protected]
Date of Purchase by retail owner, if the truck has been purchased by retail owner
Retail owner name and address
Make and model of the Truck
Dealer or repair facility name and complete address where the inspection and repair has been performed.
Dealer or repair facility hourly rate
Labor Hours for the specific claim
Description of work performed
Photos of any issues found
A Lippert Claim Form is attached. Completion and submission of this specific form is not required, but it is attached for your convenience.
IMPORTANT SAFETY RECALL
NHTSA Safety Recall: 21V672
Date: October 1, 2021
VIA EMAIL & FED EX DELIVERY
RETAIL CUSTOMER NOTIFICATION
This Customer Notification is sent to you in accordance with the requirements of the United States National Traffic and Motor Vehicle Safety Act.
REASON FOR THIS RECALL
Our Supplier for windows installed in our Custom Sleepers and Motorcoaches is Lippert Components. Lippert has issued a recall for their 6400 Series Window vent that is installed on windows manufactured by Lippert between 10/01/2018 and 08/13/2020. Gracie Industries, LLC d/b/a Bolt Custom Trucks (Bolt Custom Trucks) is recalling certain 2018 to 2021 Custom Sleeper Trucks equipped with Lippert Hehr 6400 series windows. The adhesive that bonds the vented portion of the window may fail. Adhesive failure may cause the vent portion of the window to detach, increasing the risk of crash or injury. Lippert has provided us a list of their shipments to us with affected windows. We have identified the vehicles produced within the date range of these windows and are similarly issuing our own recall on these vehicles. Furthermore, we have been provided window inspection and repair instructions by Lippert, as well as the relevant tools for doing so. We have reproduced these instructions as it applies to our sleepers and motorcoaches and these instructions are enclosed with this letter.
WHAT WE WILL DO
We will facilitate you being supplied by ourselves or Lippert a gauge to be used while conducting inspection of the vent portion of the 6400 series windows (Recall Inspection Part Number 2021094575), as well as a replacement vent if the original vent is found to have an adhesive bond issue. Lippert will also reimburse you for 0.4 labor charged for yourself or your customers to inspect the involved vented windows and replace any needed vent at the flat rate of 0.5 hour. Lippert says that the parts for the remedy are available when needed. The instructions mentioned above also include instructions for properly presenting billing to Lippert for this inspection and repair time, as well as their invoice requirements.
Furthermore, we will provide you with a list of the relevant vehicle make, model and VINs that are subject to this recall.
WHAT YOU MUST DO
You must inspect and, if applicable, repair the identified vehicles identified per these included instructions. As stated you can submit a claim to Lippert for reimbursement of the inspection and repair labor charges. These claims may be submitted to Lippert’s Customer Service department via email to [email protected] or they can be reached by phone at 574-538-4514 if there are questions. Alternatively, we can be reached by email at [email protected] or by phone at 260-748-0314. Lippert does not require advance contact or a preauthorization to be obtained. Once again, the labor allowance for this inspection is 0.4 and the labor allowance for the repair is 0.5 with the original vent not required to be returned. Lippert will coordinate shipment of the needed inspection gauge as well as window vent with you.
If you are not satisfied, we have done our best to remedy this situation, you may submit a written complaint to:
Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. SE, Washington, DC 20590. You may call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We regret any inconvenience this concern may cause you. As we are sure you will appreciate, the safety and quality of our products are of the utmost importance to us. Thank you for your attention and cooperation in this matter.
Sincerely,
Bolt Custom Trucks and AA Truck Sleeper
21E047 Hehr 6400 Series Windows Adhesive Failure
http://oemdtc.com/6277/21e047-hehr-6400-series-windows-adhesive-failure
4 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| BOLT CUSTOM TRUCKS | CUSTOM SLEEPER | 2018-2021 |
11 Associated Documents
Remedy Instructions and TSB
RCRIT-21V672-4177.pdf 738.364KB
Recall 573 Report- Amendment 1
RCLRPT-21V672-6879.PDF 214.246KB
Recall Acknowledgement
RCAK-21V672-4357.pdf 646.617KB
Defect Notice 573 Report
RCLRPT-21V672-7058.PDF 214.246KB
Recall 573 Report- Amendment 3
RCLRPT-21V672-4933.PDF 216.027KB
Remedy Instructions and TSB
RCRIT-21V672-4563.pdf 738.626KB
Recall 573 Report- Amendment 2
RCLRPT-21V672-7245.PDF 216.458KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V672-5973.pdf 215.309KB
Miscellaneous Document- Lippert Warranty Claim Form
RMISC-21V672-9120.pdf 120.328KB
Recall Quarterly Report #1, 2021-4
RCLQRT-21V672-5363.PDF 211.241KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V672-5179.PDF 211.241KB
Latest Recalls Documents
- BOND WINDSHIELDS YOUR WAY: Compatible with both manual or powered caulking guns
- FAST-CURING: Adhesive produces rapid results, curing in just 24 hours
- For industrial/occupational use only. Not for consumer use
- HIGH-BOND STRENGTH: Designed for permanent windshield bonding and stationary glass attachment
- MEDIUM-VISCOSITY FORMULA: Non-sag urethane formula makes for clean and easy application
- FAST-CURING WINDSHIELD ADHESIVE — OEM QUALITY BOND — Professional-strength polyurethane formula bonds windshields, rear windows, and side glass with fast-curing adhesive that reaches handling strength in hours, not days. OEM-level performance for auto glass replacement and repair.
- HIGH BOND STRENGTH — WON'T SHRINK OR CRACK — Engineered for permanent, flexible adhesion that holds through temperature swings, road vibration, and weather exposure. The cured seal stays flexible without shrinking or cracking over time — critical for maintaining a watertight windshield.
- WORKS ON VEHICLE & RV GLASS — Use as a windshield sealant, rear view mirror adhesive, or window seal compound on cars, trucks, SUVs, vans, and RVs. Bonds glass to metal, fiberglass, and painted surfaces with equal strength.
- EASY APPLICATION — STANDARD CAULKING GUN COMPATIBLE — Cartridge loads into any standard caulking gun for controlled, even bead placement. No proprietary tools required. Includes disposable nitrile gloves and spreader tool for clean, professional results.
- BLACK URETHANE FORMULA — 10.5 FL OZ — Black color matches OEM windshield sealant lines for factory-appearance repairs. One cartridge provides enough adhesive for a full windshield installation on most vehicles.
- PROFESSIONAL AUTO GLASS BOND: High-strength urethane adhesive bonds windshields securely to vehicle frames for a permanent, weatherproof seal. Helps prevent leaks and withstands road vibrations and extreme temperatures.
- SUPER FAST 1-HOUR CURE: Advanced moisture-curing formula sets quickly with a 10-15 minute work time and achieves safe drive-away strength in as little as one hour (at 73°F). Ideal for professionals to minimize vehicle downtime.
- EASY, NO-MESS APPLICATION: Medium viscosity, non-sag formula won't drip for controlled application on vertical or overhead surfaces. Use any standard 10.5 oz cartridge caulking gun (manual or powered) for precise adhesive placement.
- ONE-PART URETHANE, NO MIXING: Ready-to-use single-component polyurethane adhesive requires no mixing or special equipment. Simplifies windshield replacement with consistent bonding performance and no guesswork.
- VERSATILE & UNIVERSAL USE: Designed for replacing bonded auto glass, including windshields, rear windows, and quarter glass. Also suitable for some non-structural panel bonding applications. Universal fit for cars, trucks, and SUVs.
- Ultra-Bond Windshield Adhesive: Specifically for permanent windshield bonding & fixation, windshield adhesive sealant prevents glass loosening & water leakage for years; holds tight even under heavy glass weight or extreme impacts for worry-free driving
- Fast Cure for All Auto Glass Jobs: Quick-curing cuts downtime, gets you driving sooner; offers non-sag bonds to windshield edges, sunroofs, sidelights, & backlights on car, truck, RV, convertible & more, ideal for vertical & overhead applications
- Hassle-Free for Anyone: No primer needed, windshield glue effortlessly achieves enduring adhesion without complex surface treatment; the kit includes gloves & an applicator tip, making window repair totally stress-free, perfect for pros & DIYers
- All-Weather Durability: Urethane adhesive withstands extreme heat & cold, no softening, deformation or adhesion loss even in harsh conditions; resists UV, won’t crack, or lose flexibility even for 30+ years, offering lasting sealing in any climate
- No-Risk Promise: If our heavy-duty polyurethane adhesive fails to meet your expectations, we’ll replace it or refund your order; just contact us; we stand behind our products because we use them ourselves
- Strong Adhesion – This windshield glue adhesive absorbs shocks and vibrations to keep windshields securely in place. Prevents cracks and leaks, even on rough roads or under extreme stress.
- Quick-Curing & Non-Drip – Our urethane adhesives formula sets quickly without sagging or dripping, significantly reducing hold time. This allows you to complete vertical and overhead applications faster and with a cleaner, more professional finish.
- Weather-Resistant – Whether it’s sweltering summer heat, freezing winter cold, or even extreme temps from -50°C to 180°C, our formula withstands high and low temperatures, UV rays, and moisture—forming an impenetrable seal that shields your vehicle from downpours and humidity, all for long-lasting performance.
- Easy Application – Our polyurethane windshield adhesive comes in a 300ml cartridge compatible with standard caulking guns. It’s ready to use, includes an applicator tip, and just remember to clean the surface before use for smooth, reliable bonding.
- Multipurpose Automotive Adhesive – This auto glass adhesive seamlessly bonds windshields, backlights, sidelights, and glass edges on any vehicle—from cars and trucks to RVs. Designed for both DIY enthusiasts and professional repairs, it’s the go-to solution for durable, leak-proof results every time.
Last update on 2026-05-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.