FL904 Alternator Power Cable Connection May Be Loose – 2020-2022 Thomas Built EFX & HDX School Buses

November 2, 2021 NHTSA CAMPAIGN NUMBER: 21V850000

Alternator Power Cable Connection May be Loose

A loose power cable connection may cause electrical arcing, which can increase the risk of a fire.

 

NHTSA Campaign Number: 21V850

Manufacturer Daimler TruckseBay logo North America, LLC

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 1,434

 

Summary

Daimler TruckseBay logo North America, LLC (DTNA) is recalling certain 2020-2022 Thomas Built EFX and HDX school buses. The nut for the power cable stud on the alternator may not have been tightened properly, which can cause a loose cable connection.

 

Remedy

Dealers will inspect the alternator power cable connection and tighten it if necessary, free of charge. Owner notification letters were mailed on December 17, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL904.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Thomas Built EFX
Thomas Built EFX

 


Subject: TBB Alternator Cable Loose

Models Affected: Specific model year 2020-2022 Thomas Built Buses EFX and HDX vehicles manufactured October 1, 2019, through August 19, 2021.

 

General Information

Daimler TruckseBay logo North America LLC (DTNA), on behalf of its wholly owned subsidiary, Thomas Built Buses (TBB), has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above.

On certain EFX & HDX model school busses, the nut for the power cable stud on the alternator may not have been torqued properly. A loose cable connection on an unfused power cable may increase the risk of a fire.

The alternator power cable connection will be inspected and torqued if necessary. Repairs will be performed by DTNA authorized service facilities.

There are approximately 1,451 vehicles involved.

 

Additional Repairs

Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.

Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.

Please contact Warranty Campaigns for consideration of additional charges prior to performing the repair.

 

Work Instructions

Please refer to the attached work instructions.

 

Replacement Parts

There are no replacement parts.

 


Chronology :

At the end of July 2021, DTNA received a notification from a dealer of a bus with a loose power cable at the alternator. The dealer reported they inspected four additional units and found the nut that secures the cable to the alternator was not fully torqued. In August, DTNA began an investigation to determine the scope of the issue. At approximately the same time and thru October 2021, DTNA undertook a detailed review of warranty and field reports. Additional instances were identified that may be related to possible loose cable connections at the alternator. In total, 17 instances were identified potentially related to loose positive cable connections at the alternator. There was one occurrence, found in a warranty claim, where the dealer linked the alternator cable connection to a loose cable connection. On October 28, 2021, DTNA with an abundance of caution, decided to conduct a voluntary recall campaign on certain Thomas Built Buses Saf-T-Liner HDX and EFX school buses that may have a loose power cable connections at the alternator. There are no reported injuries or deaths related to this issue.

In February 2022, NHTSA asked for updated information on warranty claims, field service reports, and other things such as the number of deaths and injuries. The response is:

  • In July 2021, DTNA received a dealer notification, described above. Also that month, DTNA received seven claims, within the 17 cited above.
  • In August 2021, DTNA discovered five claims where the alternator cable was loose or detached from the power stud on the alternator, as part of the investigation described above.
  • In September 2021, DTNA received three additional claims, also within the 17 cited above.
  • Subsequent warranty searches revealed other claims, with potentially similar failure modes although the link cannot be verified–one in December 2020 and another in March of 2021.
  • There were no injuries or deaths reported.

 


6 Affected Products

Vehicles

MAKEMODELYEAR
THOMAS BUILT BUSESSAF-T-LINER EFX2020-2022
THOMAS BUILT BUSESSAF-T-LINER HDX2020-2022

 


14 Associated Documents

Manufacturer Notices(to Dealers,etc)

RCMN-21V850-8523.pdf 965.417KB

 


Recall Acknowledgement

RCAK-21V850-7434.pdf 652.216KB

 


Recall 573 Report – Amendment 1

RCLRPT-21V850-3876.PDF 214.029KB

 


Defect Notice 573 Report

RCLRPT-21V850-2839.PDF 214.055KB

 


Miscellaneous Document- Defect Information Report

RMISC-21V850-2812.pdf 727.183KB

 


Miscellaneous Document – Amended DIR

RMISC-21V850-8972.pdf 639.15KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V850-0544.pdf 146.989KB

 


Recall 573 Report – Amendment 2

RCLRPT-21V850-8676.PDF 214.026KB

 


Recall Quarterly Report #1, 2021-4

RCLQRT-21V850-1472.PDF 211.152KB

 


Miscellaneous Document

RMISC-21V850-4098.pdf 703.984KB

 


Recall Quarterly Report #2, 2022-1

RCLQRT-21V850-5454.PDF 211.253KB

 


Recall Quarterly Report #3, 2022-2

RCLQRT-21V850-6204.PDF 211.333KB

 


Recall 573 Report – 2/11/22

RCLRPT-21V850-3115.PDF 214.459KB

 


Recall Quarterly Report #4, 2022-3

RCLQRT-21V850-9845.PDF 211.446KB

 


Latest Recalls Documents

 


 

Bestseller No. 1
ANCEL BA101 Car Battery Tester, 12V Digital Automotive Alternator Meter Diagnostic Tool,100-2000 CCA Load Capacity, Charging & Cranking Analyzer for Truck, Boat, RV, Marine Vehicle, and More
  • Catch Battery Problems Early: Featured in two videos by Project Farm, a popular YouTube channel with millions of subscribers, the ANCEL BA101 helps you quickly spot battery issues before they leave you stranded. It provides easy-to-understand readings for State of Health (SOH), State of Charge (SOC), voltage, current, CCA, plus cranking and charging system tests, so you can better understand your battery and help avoid unexpected breakdowns
  • Know the Real Condition: Don’t let inaccurate readings lead to costly surprises. Built with high-quality copper crocodile clips and a precision smart chip, this battery tester is designed to deliver dependable results. For the most accurate test, enter the correct battery type, rating value (such as CCA/Ah), and temperature exactly as shown on your battery label, so you get a clearer picture of your battery’s true condition
  • Fast, Clear, Hassle-Free Testing: The classic black-and-white screen, adjustable contrast, and white backlight make results easy to read in bright sunlight or low-light conditions. One-handed operation keeps testing simple, while direct power from your vehicle’s battery means no charging and no internal batteries to deal with. Multi-language support makes it easier for more users to test with confidence
  • Protection When Mistakes Happen: Built-in 4-in-1 protection helps guard against reverse polarity, short circuits, overcurrent, and overvoltage for safer testing, especially in tight spaces where clamp slips or wiring mistakes can happen. The 3x reinforced ABS housing adds extra durability and helps protect both the tester and your battery during everyday use
  • Built for More 12V Batteries: Supporting global standards including JIS, EN, DIN, SAE, BCI, GB, CA, MCA, and IEC, this tester works with 12V batteries used in cars, trucks, boats, RVs, ATVs, lawnmowers, golf carts, and motorbikes over 30Ah. Compatible with Flooded, AGM, GEL, and EFB batteries. Not for lithium batteries, non-12V batteries (6V/8V/24V), or motorcycles below 30Ah. For 6V testing, choose BA101 Plus. For 24V testing, choose BA101 PRO
SaleBestseller No. 2
TOPDON BT100 12V Car Battery Tester, Automotive Battery Load Tester
  • [Car Battery Tester] You can easily test and inspect your 12V lead-acid battery with this TOPDON car battery tester. The SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and numerous other understandable analytical data are provided by this battery tester. It is compatible with 100-2000CCA regular flooded, AGM flat plate/spiral, EFB, and GEL for their optimum performance.
  • [Wide Application] This 12V battery load tester can only be powered on once it is properly attached thanks to a safe passive testing approach. You may test the batteries of a number of vehicles, including cars, motorbikes, trucks, RVs, ATVs, SUVs, boats, yachts, lawnmowers, and even golf carts, without needing to charge the device first.
  • [3 Testing Function] A battery health test will determine whether or not the battery is in excellent operating order. A cranking test will determine whether or not the electrical system has sufficient power to start the engine. Check to see that the charging current, rectifier diode, and generator are all functioning normally. This handy auto battery analyzer makes sure your summer road trips won’t end on a flat.
  • [Ergonomic Features] To help you rapidly determine the health of the battery, this load battery tester is built with three different colors of LEDs. It's easy to use because it operates through a menu system. Additionally, for a reliable and secure connection during the testing process, premium-quality copper clamps have polarity reverse prevention and spark proof features.
  • [Great Choice] The TOPDON BT100 is small and compact, making it simple to keep in a glove box or center console. This battery load tester's rapid and precise results will enable you to decide whether your car battery needs to be replaced or jump-started making it an excellent choice for auto shops, garages, and DIY users who frequently check batteries.
Bestseller No. 3
UHANBUT 12V Car Battery Tester, Car Alternator Charging System Analyzer
  • 【Reliable Car Battery Tester】: The alternator tester can accurately determine whether the car battery needs to be replaced or if there is a power outage, and at the same time evaluate the output status of the alternator, clearly presents real-time voltage data, battery health and charging status. It can effectively prevent the battery from being damaged due to overcharging or undercharging, and extend the battery's service life.
  • 【Clear LED Display】: The car battery tester is equipped with a digital display LED screen, which can clearly present the measurement values at night, providing strong assistance for measurement work and allowing you to easily read the data.
  • 【Easy to Use】: This car battery capacity analysis is simple and convenient. You just need to connect the positive and negative poles correctly to the alternator. Connect the red clip to the positive pole and the black clip to the negative pole. When the battery is fully charged, the "FULL" display will light up. When the battery is too high, the "HIGH" display will light up. When the battery is low, the "LOW" display will light up. When the battery is dead, the "EMPTY" display will light up.
  • 【Protection Features】: The car battery tester includes reverse connection protection and over-voltage protection, which can effectively prevent damage caused by wiring errors. When the positive and negative poles are reversed, the LED display will not show, the "REVERSE" LED will light up and a buzzer alarm will sound. If the voltage exceeds the safety threshold, the "HIGH" indicator will light up immediately, triggering the device's over-voltage protection mechanism.
  • 【Widely Used】: The alternator tester is suitable for measurement in most vehicles equipped with 12V batteries, such as cars, off-road vehicles, trucks, motorcycles, ships, golf carts, lawnmowers, etc. It can meet your diverse testing needs.
SaleBestseller No. 4
MOTOPOWER MP0515A 12V Car Battery Tester Automotive 100-2000 CCA Battery Load Tester Auto Cranking and Charging System Tester
4,367 Reviews
MOTOPOWER MP0515A 12V Car Battery Tester Automotive 100-2000 CCA Battery Load Tester Auto Cranking and Charging System Tester
  • 🔥【A MUST HAVE TOOL IN YOUR GARAGE】 - With up-to-date testing technology, it provides a quick reading to determine whether a vehicle battery needs a jump or replacement and also the output status of the alternator. All you have to do is log in and play. Save your time and money.
  • 🔥【BATTERY HEALTH CONTROL】 - Applied with the latest test algorithm, the tester will analyze the battery and get the results in seconds, including health status, charging status, internal resistance and test conclusion (mediocre, good, excellent). All types of 12V 100-2000CCA lead acid batteries can be tested.
  • 🔥【START AND CHARGE SYSTEM TEST】 - Test the starting voltage of the alternator when starting the engine to see if it is low or under normal conditions. Check the continuous power of the alternator when the engine is running to see if the alternator provides adequate power to the battery and electrical system.
  • 🔥【Real Time Wave Display & Data Printing】 - When you need more details about the performance of your battery or alternator when working, you can use the wave viewing function to monitor the output curve in real time. It gives you all the detailed changes of the output.
  • 🔥【3 inch color LCD screen and 9 languages supported】 - The 3 inch color LCD screen (240 x 320 pixels) is user-friendly and easy to read. Give you a more comfortable viewing experience with every inspection. 9 languages supported - English, Spanish, French, German, Italian, Russian, Portuguese, Chinese and Polish.
SaleBestseller No. 5
KINGBOLEN BM550 6V 12V 24V Car Battery Tester,Auto Battery Analyzer
  • 【6V 12V 24V Battery Tester】KINGBOLEN BM550 battery tester can test all 6V 12V 24V 100-2000 CCA car batteries, support 2Ah-220Ah(need to enter the corresponding CCA value on the battery), including regular flooded(Regular battery), AGM flat plate(AGM tablet battery), AGM spiral(AGM winding battery), GEL and EFB batteries, battery analyzer for cars trucks etc.( Not suitable for deep cycle batteries )
  • 【Practical Car Battery Analyzer】BM550 car battery analyzer can quickly and accurately display multiple data of the car battery. It can test the SOH (state of health) and SOC (state of charge) of the battery, easily test 100-2000 CCA, internal resistance test and voltage test. With our battery tester, you can easily grasp the current state of your car battery and avoid accidents.
  • 【Simple Operation & Accurate Data】The results of the battery test are based on the CCA standard, which can be quickly and accurately displayed on the 1.8-inch HD screen, allowing you to quickly know the status of the battery.You can test the batteries both in-vehicle and out-of-vehicle, which is very convenient.
  • 【Safe design & Safe Use】The battery tester adopts Reverse Connection Protection. If you accidentally reverse the two wires, don't worry, the battery tester will not work at this time to prevent the internal circuit from burning, which can well protect the equipment and the long-term use of the car battery.(If the clip is not properly clamped,the screen will flicker)
  • 【Plug and Play】It is simple to use, just connect the clip of the battery tester to the car battery correctly and it can start working, whether the battery is in vehicle or out of vehicle, or a dead battery can be tested.Simple and effective tool designed for DIY enthusiasts, car factories, garages, car battery manufacturers and more.Start your test now!

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...