November 22, 2021 NHTSA CAMPAIGN NUMBER: 21V915000
Incorrect GAWR Label/FMVSS 136
The operator may overload the vehicle while referencing the incorrect label, increasing the risk of a crash.
NHTSA Campaign Number: 21V915
Manufacturer Daimler Trucks
North America, LLC
Components EQUIPMENT
Potential Number of Units Affected 1
Summary
Daimler Trucks
North America, LLC (DTNA) is recalling one 2021 Thomas Built Buses Saf-T-Liner HDX transit bus. The gross axle weight rating (GAWR) may be improperly stated on the label. As such, this vehicle fails to comply with the requirements of Federal Motor Vehicle Safety Standard number 136, “Electronic Stability Control Systems on Heavy Vehicles.”
Remedy
A dealer will apply a new label, free of charge. The owner notification letter is expected to be mailed January 16, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL911.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check for Daimler Trucks North America Recalls
There will be no publications for noncompliance recall 21V-915.
All vehicles within this recall campaign have been repaired prior to the publication of a Dealer’s Bulletin or Owner Notification.
Chronology :
In August 2021, Thomas Built Buses began an internal review FMVSS 136 ESC requirements. From September 2021 through October 2021 staff conducted a thorough assessment of all buses that were thought to be at risk of having non-compliances. This assessment identified one bus that did not fully comply with the FMVSS 136 ESC requirements due to an incorrect GAWR on the label. Promptly upon determining the noncompliance, in November 2021 DTNA decided to conduct a non-compliance recall.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| THOMAS BUILT BUSES | SAF-T-LINER HDX | 2021 |
9 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-21V915-2434.PDF 213.194KB
Recall Acknowledgement
RCAK-21V915-6841.pdf 645.525KB
ISSUED Owner Notification Letter(Part 577)
Recall 573 Report – Amendment 3
RCLRPT-21V915-2053.PDF 213.297KB
Recall 573 Report – Amendment 2
RCLRPT-21V915-9479.PDF 213.238KB
Recall 573 Report – Amendment 1
RCLRPT-21V915-9313.PDF 213.194KB
Recall Quarterly Report #1, 2022-1
RCLQRT-21V915-4165.PDF 211.14KB
Recall Quarterly Report #2, 2022-2
RCLQRT-21V915-0993.PDF 211.241KB
Recall Quarterly Report #3, 2022-3
RCLQRT-21V915-2120.PDF 211.319KB
Latest Recalls Documents
- [Wide Compatibility Heavy Duty Truck Scanner] Compatible with a wide range of 12V & 24V heavy-duty trucks across North America, including major truck brands such as Freightliner
, Peterbilt
, Kenworth
, International
, Volvo
, and Western Star
, with support for common diesel engines from Cummins
, Detroit, and PACCAR
. Whether you're an owner-operator, fleet manager, or repair technician, HD601 helps simplify routine inspections, preventive maintenance, and everyday fault checks. Vehicle coverage may vary by model year, system, and configuration - [Full-System Diagnostic Truck Scanner] This heavy duty diagnostic scanner supports full-system diagnostics for heavy-duty trucks, including Engine, Transmission, ABS, and more.It helps quickly identify faults, pinpoint problem areas, troubleshoot faster, and understand which systems need attention before repairs. Compatible light-duty vehicles support OBD2 diagnostics only
- [DTC Library + Live Data] This truck diagnostic scanner's built-in DTC library helps truck drivers, DIY users, and more quickly understand fault information. You can also manually enter standard SPN and FMI codes to look up fault details. For roadside situations without internet access, it helps identify possible problem areas
- [2-in-1 Heavy Duty & OBDII Diagnostics] This heavy duty scanner supports both HDOBD and OBDII diagnostics. It provides essential functions including Quick Scan, Full Scan, Live Data, Freeze Frame Data, Fault Code Reading and Clearing, and more. It supports HDOBD protocols such as J1939 and J1587/J1708 for reliable vehicle communication
- [Supports Multiple Vehicle Types] Suitable for various commercial vehicles, including heavy-duty trucks, semi-trucks, buses, and more. This truck scanner diagnostic tool features 6/9/16-pin connectors to support common vehicle interfaces, making it suitable for different vehicle applications and transportation needs
- Boost DPF Performance For Smooth Truck Operation: Facing power loss, weak acceleration or constant DPF warning lights? The DPF regen scan tool offers forced DPF regeneration, DPF Reset, and DPD/DPR functions to clear soot buildup, recover engine output and keep exhaust aftertreatment working properly. Detect DPF‑related errors fast, reduce downtime, and prolong your diesel particulate filter lifespan. Vehicle compatibility varies. Please verify before purchase.
- Full-System Diagnostics with Real-Time Live Data: This truck scanner diagnostic tool covers Engine, ABS, Transmission, SRS, SAS, TPMS and other core vehicle systems. Read & clear fault codes, access live data stream, freeze frame, I/M readiness, DTC lookup and additional practical functions. Leverage real‑time data to quickly locate faults and support reliable repair judgements.
- 7+ Resets ‑ Perform Essential Service Procedures: The heavy duty diagnostic tool comes with 7+ professional service resets. It supports DPF Regen for soot removal, Oil Reset to erase service reminders, Injector Coding for new injectors, DEF Test, Speed Limit Adjustment, Cylinder Cutout for weak cylinder detection, Clutch Relearn for improved clutch engagement. Run these resets after service or component replacement to keep your truck working properly. Available functions vary by vehicle model.
- One Professional heavy duty scanner for 50+ Truck Brands: Compatible with J1939, J1708, J1587, and OBD2/CAN protocols this semi truck scanner delivers wide coverage for mainstream diesel trucks and commercial vehicles. Supported brands include Cummins
, Detroit, Caterpillar
, Paccar
, Volvo
, Freightliner
, Kenworth
, Peterbilt
, International
, Mack
, Isuzu
, Hino, Scania, Mercedes-Benz
, and more. This single diesel diagnostic scanner lets you service more vehicles and cut down tool investment costs. - Expert Remote Diagnostic Support: Faced with unexpected truck breakdowns? Equipped with built‑in TeamViewer and tech‑to‑tech support, this diesel truck scanner enables secure real‑time remote connection with professional technicians for diagnosis and troubleshooting. Share live vehicle data and send diagnostic feedback for quicker technical analysis to get expert guidance, no on‑site service required. Minimize downtime, prevent unnecessary repairs and get your truck back on the road sooner.
- BROAD VEHICLE & ENGINE COVERAGE: Professional heavy duty truck scanner for trucks, buses, medium-duty vehicles, construction and agricultural equipment. Supports major brands including Freightliner
, Kenworth
, Peterbilt
, Mack
, International
, Volvo
, Hino and Isuzu
, plus Cummins
, Detroit, PACCAR
, Caterpillar
and International
A26 engines. J1939/J1708 support covers newer and legacy commercial vehicles. Verify coverage before purchase - DPF REGEN & DEF/SCR: Diagnose supported diesel aftertreatment systems with DPF regeneration, soot load, differential pressure, exhaust temperature, NOx sensor and DEF level data. Helps identify DPF blockage, excessive soot, DEF/SCR faults, warning lights and derate-related issues, providing key data for faster aftertreatment diagnosis and service
- BIDIRECTIONAL ACTIVE TESTS: Go beyond code reading with two-way component testing. Command and monitor supported injectors, EGR/VGT actuators, cooling fans, fuel pumps and relays to help verify operation. Cylinder cut-off testing helps identify misfires, cylinder contribution and injector-related issues, reducing unnecessary parts replacement
- 40+ DIESEL SERVICE FUNCTIONS: Focused on high-frequency shop tasks including oil reset, injector coding, speed limiter adjustment and idle speed adjustment. Additional service and reset functions support chassis and other routine maintenance needs. Speed and idle adjustments remain within supported manufacturer parameters
- INDUSTRIAL-GRADE DUAL-CHIP HARDWARE: Quad-core 2.0 GHz processor and automotive-grade communication MCU support smooth multitasking and reliable vehicle communication. Wireless VCI offers up to 10 m Bluetooth connectivity. An 8-inch high-brightness display supports glove-friendly use
- Diagnose Heavy-Duty Truck Problems Fast — Read and clear fault codes and diagnose warning light issues on many Class 4–8 diesel trucks including Freightliner
, Peterbilt
, Kenworth
, Volvo
, Mack
and Cummins
-powered vehicles - Help Reduce Downtime & Repair Costs — It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Quickly check engine faults, view live truck data and identify issues before expensive repair shop visits or unnecessary repairs
- No complicated setup required — Simple menus and built-in DTC explanations make this truck code reader easy to use for owner-operators, mobile mechanics and small fleet maintenance
- Live Data & Built-in DTC Lookup — View real-time engine data and built-in truck fault code definitions directly on the scanner to help understand vehicle problems faster without searching through manuals
- Free Lifetime Updates & Technical Support — Includes free software updates plus responsive technical support for setup, compatibility and everyday truck diagnostics
- HANDLE MORE HEAVY-DUTY JOBS WITH ONE SCANNER — The ANCEL X7HD PRO brings full-system diagnostics, HDOBD/OBD2 diagnostics, 42+ service functions, bi-directional controls, and ECU coding into one heavy-duty scan tool. Built for diesel technicians, repair shops, and fleet maintenance teams that need one scanner for everyday diagnostics, service, active tests, and post-repair work
- TAKE ON 42+ SERVICE & RESET JOBS IN-HOUSE — Perform supported DPF regeneration, injector coding, oil reset, throttle adaptation, EPB reset, ABS bleeding, idle/speed adjustment, and more. Handle more routine maintenance and service work in your own shop or fleet yard instead of relying on a dealer or separate tools for every job
- COMMAND COMPONENTS & CHECK THEIR RESPONSE — Bi-directional control lets you command supported components such as injectors, cooling fans, throttle actuators, and ABS-related systems, then check how they respond. Use active tests to narrow down a problem before tearing things apart or replacing parts, helping you troubleshoot based on actual component behavior instead of fault codes alone
- CODE & MATCH MODULES AFTER REPLACEMENT — Perform supported ECU coding, module matching, adaptations, and relearn procedures when replacing compatible components or control modules. Complete more post-repair setup with the same scanner and help ensure replacement modules are properly configured to communicate with the vehicle
- DIAGNOSE MORE SYSTEMS ACROSS A MIXED FLEET — Read and clear codes, view live data and freeze frame information, and access supported systems including Engine, Transmission, ABS, and Body. Coverage includes compatible Freightliner
, Kenworth
, Peterbilt
, Volvo
, Mack
, and International
trucks; Cummins
, Caterpillar
, Detroit, PACCAR
, and Navistar
engines; plus supported OBD2/HDOBD vehicles—giving multi-brand shops and fleets broader coverage from one tool
SEOCONTENT-START
Daimler Truck North America, LLC 4747 N. Channel Avenue Portland OR 97217-7699 Phone: 503-745-8000 January 19, 2022 Michelle Rice Recall Analyst Department of Transportation National Highway Traffic Safety Administration 1200 New Jersey Avenue SE., Washington, DC 20590 Office: 202-366-1060 Subject: Incorrect GAWR Label NHTSA NS No. 21V-915 Manufacturer number: FL-911 Ms. Rice, There will be no publications for noncompliance recall 21V-915. All vehicles within this recall campaign have been repaired prior to the publication of a Dealer’s Bulletin or Owner Notification. Please contact me if you have any questions. Sincerely, Tiffani Torgeson Manager Compliance and Regulatory Affairs Daimler Truck North America Tiffani Torgeson Manager Compliance and Regulatory Affairs
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-915 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Trucks
North America, LLC Submission Date : NOV 30, 2021 NHTSA Recall No. : 21V-915 Manufacturer Recall No. : FL911 Manufacturer Information : Manufacturer Name : Daimler Trucks
North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 Thomas Built Buses Saf-T-Liner HDX Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : A certain MY 2021 Thomas Built Busses Saf-T-Liner HDX non school bus. Production Dates : JAN 20, 2020 – JAN 20, 2020 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : On the affected vehicle, the specified gross axle weight rate (GAWR) may be improperly stated. As a result, the vehicle may not comply with the requirements of FMVSS 136 – Electronic Stability Control Systems if front axle is loaded to the labeled GAWR. FMVSS 1 : 136 – Electronic Stability Control Systems on Heavy Vehicles FMVSS 2 : NR Description of the Safety Risk : In an emergency maneuver a vehicle that does not comply with the FMVSS 136 requirements, if loaded to the labeled GAWR, may have an increased risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 21V-915 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Label Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : In August 2021, Thomas Built Buses began an internal review FMVSS 136 ESC requirements. From September 2021 through October 2021 staff conducted a thorough assessment of all buses that were thought to be at risk of having non-compliances. This assessment identified one bus that did not fully comply with the FMVSS 136 ESC requirements due to an incorrect GAWR on the label. Promptly upon determining the noncompliance, in November 2021 DTNA decided to conduct a non-compliance recall. Description of Remedy : Description of Remedy Program : The remedy is to apply new label with the correct GAWR. Repairs will be made by Daimler Trucks
North America authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification letter. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : JAN 16, 2022 – JAN 16, 2022 Planned Owner Notification Date : JAN 16, 2022 – JAN 16, 2022 Part 573 Safety Recall Report 21V-915 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-915 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Trucks
North America, LLC Submission Date : NOV 22, 2021 NHTSA Recall No. : 21V-915 Manufacturer Recall No. : FL911 Manufacturer Information : Manufacturer Name : Daimler Trucks
North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 Thomas Built Buses Saf-T-Liner HDX Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : A certain MY 2021 Thomas Built Busses Saf-T-Liner HDX non school bus. Production Dates : JAN 20, 2020 – JAN 20, 2020 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : On the affected vehicle, the specified gross axle weight rate (GAWR) may be improperly stated. As a result, the vehicle may not comply with the requirements of FMVSS 136 – Electronic Stability Control Systems if front axle is loaded to the labeled GAWR. FMVSS 1 : 136 – Electronic Stability Control Systems on Heavy Vehicles FMVSS 2 : NR Description of the Safety Risk : In an emergency maneuver a vehicle that does not comply with the FMVSS 136 requirements, if loaded to the labeled GAWR, may have an increased risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 21V-915 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Label Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : In August 2021, Thomas Built Buses began an internal review FMVSS 136 ESC requirements. From September 2021 through October 2021 staff conducted a thorough assessment of all buses that were thought to be at risk of having non-compliances. This assessment identified one bus that did not fully comply with the FMVSS 136 ESC requirements due to an incorrect GAWR on the label. Promptly upon determining the noncompliance, in November 2021 DTNA decided to conduct a non-compliance recall. Description of Remedy : Description of Remedy Program : The remedy is to apply new label with the correct GAWR. Repairs will be made by Daimler Trucks
North America authorized service facilities. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : JAN 16, 2022 – JAN 16, 2022 Planned Owner Notification Date : JAN 16, 2022 – JAN 16, 2022 Part 573 Safety Recall Report 21V-915 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-915 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Trucks
North America, LLC Submission Date : NOV 22, 2021 NHTSA Recall No. : 21V-915 Manufacturer Recall No. : FL911 Manufacturer Information : Manufacturer Name : Daimler Trucks
North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 Thomas Built Buses Saf-T-Liner HDX Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : A certain MY 2021 Thomas Built Busses Saf-T-Liner HDX non school bus. Production Dates : JAN 20, 2020 – JAN 20, 2020 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : On the affected vehicle, the specified gross axle weight rate (GAWR) may be improperly stated. As a result, the vehicle may not comply with the requirements of FMVSS 136 – Electronic Stability Control Systems if front axle is loaded to the labeled GAWR. FMVSS 1 : 136 – Electronic Stability Control Systems on Heavy Vehicles FMVSS 2 : NR Description of the Safety Risk : In an emergency maneuver a vehicle that does not comply with the FMVSS 136 requirements, if loaded to the labeled GAWR, may have an increased risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 21V-915 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Label Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : In August 2021, Thomas Built Buses began an internal review FMVSS 136 ESC requirements. From September 2021 through October 2021 staff conducted a thorough assessment of all buses that were thought to be at risk of having non-compliances. This assessment identified one bus that did not fully comply with the FMVSS 136 ESC requirements due to an incorrect GAWR on the label. Promptly upon determining the noncompliance, in November 2021 DTNA decided to conduct a non-compliance recall. Description of Remedy : Description of Remedy Program : The remedy is to apply new label with the correct GAWR. Repairs will be made by Daimler Trucks
North America authorized service facilities. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : JAN 16, 2022 – JAN 16, 2022 Planned Owner Notification Date : JAN 16, 2022 – JAN 16, 2022 Part 573 Safety Recall Report 21V-915 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-915 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Trucks
North America, LLC Submission Date : DEC 13, 2021 NHTSA Recall No. : 21V-915 Manufacturer Recall No. : FL911 Manufacturer Information : Manufacturer Name : Daimler Trucks
North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 Thomas Built Buses Saf-T-Liner HDX Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : Power Train : NR Descriptive Information : A certain MY 2021 Thomas Built Busses Saf-T-Liner HDX non school bus. Production Dates : JAN 20, 2020 – JAN 20, 2020 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : On the affected vehicle, the specified gross axle weight rate (GAWR) may be improperly stated. As a result, the vehicle may not comply with the requirements of FMVSS 136 – Electronic Stability Control Systems if front axle is loaded to the labeled GAWR. FMVSS 1 : 136 – Electronic Stability Control Systems on Heavy Vehicles FMVSS 2 : NR Description of the Safety Risk : In an emergency maneuver a vehicle that does not comply with the FMVSS 136 requirements, if loaded to the labeled GAWR, may have an increased risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 21V-915 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Label Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : In August 2021, Thomas Built Buses began an internal review FMVSS 136 ESC requirements. From September 2021 through October 2021 staff conducted a thorough assessment of all buses that were thought to be at risk of having non-compliances. This assessment identified one bus that did not fully comply with the FMVSS 136 ESC requirements due to an incorrect GAWR on the label. Promptly upon determining the noncompliance, in November 2021 DTNA decided to conduct a non-compliance recall. Description of Remedy : Description of Remedy Program : The remedy is to apply new label with the correct GAWR. Repairs will be made by Daimler Trucks
North America authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification letter. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Trucks
North America records to determine the customers affected. Planned Dealer Notification Date : JAN 16, 2022 – JAN 16, 2022 Planned Owner Notification Date : JAN 16, 2022 – JAN 16, 2022 Part 573 Safety Recall Report 21V-915 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





