Valve Train Covers Paint Peeling – 2019 Can-Am Spyder F3

NHTSA ID Number: 10194471

Manufacturer Communication Number: Bulletin 2019-4

 

Summary

“Warranty Bulletin no 2019-4

Valve Train Covers Paint Peeling”

 

 


PROBLEM

Valve train covers paint peeling on some vehicles.

 

SOLUTION

Inspect vehicle for valve train covers paint defects.

Replace valve train covers if inspection reveals defects.

 

PARTS REQUIRED

Order parts through regular channel.

DESCRIPTIONPART NUMBERQTY
Valve train upper cover4202108631
Gasket4204500401
Valve train lower cover4202102961
Gasket4204500101
Recommended oil as per SHOP MANUAL100 ml (3.38 U.S. oz)

 

CORRECTIVE ACTION

Inspection

Clean the valve train covers using XPS ROADSTER WASH (P/N 219 701 703) to remove any grease or dust.

Apply a high adhesive tape such as DUCT TAPE on the valve train covers.

Remove the tape.

 

Inspect for paint discoloration or any paint peeling.

If inspection does not reveal any defects, no other action is necessary.

If inspection reveals defects, perform the repair.

 

Repair

Lift vehicle LH side from the ground in order to prevent oil spillage.

 

Replace the valve train covers according to appropriate SHOP MANUAL procedure using new gaskets.

 

Return vehicle on the ground.

Verify oil quantity and refill as necessary.

Start engine and make sure there is no leak.

 



1 Affected Product

Vehicle

MAKEMODELYEAR
CAN-AMSPYDER F32019

 


1 Associated Document

Manufacturer Communications

2019-4
February 12, 2019

MC-10194471-0001.pdf 1623.065KB

 


 

SaleBestseller No. 1
Castrol Power1 4T 5W-40 Full Synthetic Motorcycle Oil, 1 Quart, Pack of 6
  • Formulated with Trizone technology to protect all 3 critical zones: engine, clutch and gearbox
  • Race derived technology for maximum engine acceleration
  • Extreme high temperature air-cooled performance and water-cooled engine performance
  • Excellent shear stability to prevent viscosity breakdown
  • Exceeds API SL and JASO MA-2
SaleBestseller No. 2
Castrol Power 1 Racing 4T Motorcycle Oil - 5W40-1qt. 06113
  • Race-derived technology for maximum engine acceleration
  • Extreme high temperature air-cooled performance and water-cooled engine performance
  • Excellent shear stability to prevent viscosity breakdown
  • Fit Type: Vehicle Specific
Bestseller No. 3
Liqui Moly Motorbike 4T Synth 5W-40 Street Race | Full Synthetic Motor Oil | 4 Liter | SKU: 20076
  • Optimal lubrication in all operating conditions, ensures low oil consumption
  • Very high shear and ageing stability, highest levels of wear protection
  • Tested and approved for catalytic converters, optimal engine cleanliness
SaleBestseller No. 4
Valvoline 4-Stroke Motorcycle Full Synthetic 10W-40 Motor Oil 1 Quart
  • Up to 10X better friction protection vs. JASO T903:2016 friction std. and up to 5X better wear protection vs. industry standards in IVA engine tests
  • Reformulated premium full synthetic with advanced technology and superior additives to maximize horsepower, acceleration, fuel efficiency and oil life
  • Exceptional wet clutch protection helps prevent slippage for smooth shifting and maximum performance
  • Enhanced protection against deposits and sludge that can reduce oil flow
  • Meets or exceeds requirements of API SL and JASO MA-2 for 4-stroke motorcycles including HondaeBay logo, YamahaeBay logo, KawasakieBay logo, and SuzukieBay logo
Bestseller No. 5
SeaDoo Full Synthetic XPS Oil GALLON 9779493
140 Reviews
SeaDoo Full Synthetic XPS Oil GALLON 9779493
  • Designed for high-performance off-road, on-road and PWC 4-stroke engines, including turbo or supercharged powersports engines. Off-road formula with premium antiwear and anti-corrosion additives. Provides superior engine and transmission protection against rust and corrosion even in extreme conditions. 1 US gal. / 3.785 L Other format available : 1 QT / 946 ml (9779493)

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...