January 21, 2022 NHTSA CAMPAIGN NUMBER: 22V021000
Brake Hose Missing Designation Marking/FMVSS 106
The air brake hose
end fitting may not be traceable should there be a safety recall, increasing the risk of a crash, injury, or fire.
NHTSA Campaign Number: 22V021
Manufacturer Hino Motors Sales U.S.A., Inc.
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 1
Summary
Hino Motors Sales U.S.A., Inc. (Hino) is recalling one 2021 NJ8A vehicle. The end fittings on the replacement air brake hose
assembly may not have the manufacturer designation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 106, “Brake Hoses.”
Remedy
A dealer will replace the air brake hose
, free of charge. Owners may contact Hino customer service at 1-248-699-9390. Hino’s number for this recall is AANT0.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
September 2021 ๏ฝDecember 2021
During the development of the new model vehicle, it was discovered that a particular replacement air brake hose
assembly did not have the manufacturer designation on the air brake hose
end fittings. Investigation revealed that a replacement air brake hose
assembly was sold via a Hino dealer and installed in a single vehicle.
No other affected vehicles were identified.
January 17, 2022
Based on the investigation above, Hino confirmed that the subject air brake hose
assembly meets all requirements of FMVSS 106 with the exception of the manufacturerโs designation specifically required for assemblies under FMVSS 106 S7.2.3. Therefore, Hino has determined to perform a recall on the air brake hose
assemblies which were distributed through the service parts network.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| HINO | NJ8A | 2021 |
5 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-22V021-7136.PDF 216.583KB
Recall Acknowledgement
RCAK-22V021-5101.pdf 645.721KB
Recall 573 Report- (02/23/2022)
RCLRPT-22V021-2421.PDF 216.971KB
Recall Quarterly Report #1, 2022-1
RCLQRT-22V021-9148.PDF 211.146KB
Owner Notification Letter(Part 577)
RCONL-22V021-8212.pdf 167.09KB
Latest Recalls Documents
- ใFEATURESใAutomatic Slack Adjuster Release Tool Wrench Set is designed to simplify installation and servicing of air brake systems in heavy-duty trucks, long-haul trucks, and trailers. This tool set makes brake service tasks easier and more efficient.
- ใEase of Useใ The fork-end release tool securely fits under the brake system's pull pawl, allowing hands-free operation for servicing your truck. The tool is designed to release the tensioner button and safely adjust the brakes without prying or causing damage.
- ใConvenient for Any Mechanic Tool SetใThe 5/16" double square ratcheting wrench with E-Z Grip handle adjusts the brake with ease. It features a side-mounted forward/reverse lever for simple operation.
- ใTime-Saving and Efficientใ The tools are made of durable carbon steel with oversized double injection handles that are comfortable to grip and use. Additionally, the double square offset reversible truck wrench provides reversible ratcheting action with an angled head for clearance.
- ใQuality AssuranceใWe are committed to providing high-quality products, and if you're not satisfied with our Automatic Slack Adjuster Release Tool Set, please feel free to contact us. We will do our best to address your concerns and solve any problems you may have.
- 3 TYPES OF BRASS FITTINGS: This set includes DOT push-to-connect fittings, compression nylon tube fittings, and brass pipe fittings. It can be used for maintenance work in various scenarios, such as air brake systems and pipelines, to meet most of your needs
- 200PCS DOT FITTINGS SET: 30Pcs DOT push-to-connect fittings:7pcs straight male connector,7pcs 90ยฐmale elbow,6pcs union connector,4pcs union tee,4pcs 45ยฐmale elbow,2pcs schrader valve;123Pcs DOT compression nylon tube fittings:7pcs straight male connector,7pcs 90ยฐmale elbow,6pcs union connector,4pcs union tee,4pcs 45ยฐmale elbow,95pcs sleeve ferrules;45Pcs Brass pipe fittings:6pcs hex coupling,6pcs hex nipple,6pcs hex bushing,6pcs extension adapter,3pcs 90ยฐ street elbow,6pcs hex plug,12pcs socket plug;1pc 4m teflon tape;1pc tube cutter
- PREMIUM MATERIAL: These fittings are made of high-quality CA360 brass and meet D.O.T FMVSS 571.106, Air Brake system Requirements, with corrosion resistance, high-temperature flexibility, and low permeability
- PRESSURE RANGE: Airline fittings have pressure resistance, making them less likely to trip. Air brake fittings working pressure from vacuum max to 300 PSI. Temperature Range: -40ยฐ F to +250ยฐ F(Note: see tubing manufacturerโs recommendations for pressure and temperature limitations)
- EASY TO INSTALL: Our 200pcs fitting kit is easy to use in air systems and pipe connections. You need to use tools to fix loose parts to handle in tight places so that they will be firmer and not easily fall off. Some pieces that contain a threaded end already have sealant pre-applied, and we send Teflon tape as a gift to provide a secure connection
- TYPE - Air Brake Chamber Type 3030 30/30 30 30
- REPLACEMENT - Bendix
165255 K049898 NT3030STD120 NT3030STD-120 802547 // Meritor
3030TN2-HNTRX-C // Dayton 3030C // Haldex
GC3030 GC3030P40 // Freightliner
3030TS // Mack
19QE441RP1 - SPECS - Brake Chamber Type: 3030 // Stroke: Standard // Stroke Length: 2-1/2" // Port Thread: 2x3/8" NPT // Bolt Thread: 5/8"-11 UNC // Push Rod Length: 11-3/4" // Weight: 21lbs
- FEATURES -
- WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
- SPECIFICATION & CERTIFICATION: Package including: 1 pc 15 FT red&blue 3-in-1 air lines kit, 2 pcs 16" tender spring kits, 1 pair glad hands, 1 pair gladhand handles, 1 pc gladhand holder, 4 pcs gladhand seals, Teflon tape. Certification: [SAE J2394 - 4/12-2/10-1/8, -65โ/-85โ for ABS Green Cable], [DOT SAE J1402A 3/8" ID Air Hose], [SAE J560 for Plug]
- BOTH ENDS SPRING JOINT: Both ends of air brake hoses and ABS cables are protected by stainless steel springs. The spring joint with good elasticity can protect the wires well, and have a cushioning role when installing and using a wire. Therefore, our semi truck trailer air hose line kits have reliable security and long service life
- ALUMINUM GLADHAND HANDLE: The CheeMuii air brake hoses are directly equipped with aluminum grips instead of rubber grips that are easily damaged and aged. We are committed to providing you with safer and more durable products
- AIR BRAKE LINES: The CheeMuii red and blue air lines' double-braided design consists of interwoven spirals and is manufactured using a 3-layer integrated molding process. The air line hose assembly has higher burst pressure and better resistance to twisting, with a safer and longer service life
- 7 WAY ELECTRICAL CABLE: The power lines use the industry standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck, which meets SAE J560 testing and performance requirements. Both ends of ABS cables are protected by stainless steel springs. The spring joint can not only protect the wires well, but also have a cushioning role when installing and using
Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Hino Motors Sales, U.S.A., Inc. 45501 W 12 Mile Road Novi, MI 48377 KALMER URM 45501 W 12 Mile Rd NOVI Ml 48377 IMPORTANT SAFETY RECALL MY2021 NJ7A (L6) Conventional on-road Medium Duty Truck Air Brake Hose
Designation NHTSA 22V-021 Hino AANT0 This notice applies to your vehicle: VIN: Dear Hino Truck Owner: This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Hino has determined that a defect, which relates to motor vehicle safety, exists in certain 2021 Hino conventional trucks. You received this notice because our records, which are based primarily on state registration and title data, indicate that you are the current owner. What is the Condition? Hino identified a single subject vehicle with a replacement air brake hose
assembly in which the end fittings of that air brake hose
lacked a manufacturer designation. What will Hino do? For the subject vehicles, the dealer will replace the subject air brake hose
. Please make an appointment with your authorized Hino Dealer to have the remedial work performed. This repair will be performed at NO COST to you. What should you do? You do not need an owner letter to have this recall completed; however, to assist the dealer in confirming vehicle eligibility, we request that you present this notice at the time of your service appointment. If you would like to update your vehicle ownership or contact information, you may do so by contacting Hino Warranty at warranty@hino.com or by telephone 1-248-699-9390. You will need your full 17-digit Vehicle Identification Number (VIN) to update the new ownership or contact information. What if you have other questions? URGENT SAFETY RECALL This is an important Safety Recall. The remedy will be performed at NO CHARGE to you This is an Important Safety Recall Please contact any authorized Hino dealer to schedule an appointment to have the remedial work performed as soon as possible. This repair will take approximately 1 hour to complete. 2 โข Your local Hino dealer will be more than happy to answer any of your questions and set up an appointment to perform the repair. โข You can locate a Hino dealer in your area by going online and visiting www.hino.com โข If you require further assistance, you may contact Hino Warranty at 1-248-699-9390, Monday through Friday, 9:00 a.m. to 5:00 p.m. Eastern Time. If you believe that the dealer or Hino has failed or is unable to remedy the defect within a reasonable time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue S.E., Washington, D.C. 20590, or call the toll free Vehicle Safety Hot Line at 1-888-327-4236 (TTY: 1-800-424-9153), or go to www.safercar.gov. If you are a vehicle lessor, Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. We have sent this notice in the interest of your continued satisfaction with our products, and we sincerely regret any inconvenience this issue may have caused you. Thank you for being a valued Hino customer. Sincerely, HINO MOTORS SALES, U.S.A., INC.
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-021 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Hino Motors Sales U.S.A., Inc. Submission Date : JAN 21, 2022 NHTSA Recall No. : 22V-021 Manufacturer Recall No. : AANT0 Manufacturer Information : Manufacturer Name : Hino Motors Sales U.S.A., Inc. Address : 45501 Twelve Mile Road Novi MI 48377 Company phone : 248-699-9300 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 HINO NJ8A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : ALL Power Train : DIESEL Descriptive Information : Hino identified a single subject vehicle with a replacement air brake hose
assembly in which the end fittings of that air brake hose
lacked a manufacturer designation. The parts that are subject to the recall, which were distributed through the Service Parts Network, may not contain a manufacturer designation pursuant to 49 C.F.R. 571.106 S7.2.2(b) and 49 C.F.R. 571.106 S7.2.3.1. Production Dates : JAN 31, 2020 – JAN 31, 2020 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : On certain replacement part air brake hose
assemblies, air brake hose
end fittings may not have a designation for identifying the manufacturer. Therefore, the air brake hose
end fittings may not contain the designation requirement of FMVSS No.106 S7.2.2 (b) and FMVSS No.106 S7.2.3.1. FMVSS 1 : 106 – Brake hoses FMVSS 2 : NR Description of the Safety Risk : An air brake hose
end fitting without the manufacturer designation may not be traceable should there be a concern with performance. Hino has determined the brake hose
assembly, although missing the manufacturerโs designation, meets all of the performance requirements of FMVSS 106. Description of the Cause : A change in replacement part air brake hose
assembly supplier resulted in the missing manufacturer designation. Identification of Any Warning that can Occur : N/A Part 573 Safety Recall Report 22V-021 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Involved Components : Component Name 1 : HOSE SUB-ASSY, AIR Component Description : AIR BRAKE HOSE
Component Part Number : S4703-E0W40 Supplier Identification : Component Manufacturer Name : MEIJI FLOW SYSTEMS CO., LTD. Address : Kasei-Machi 31-7, Nobusawa Kanagawa Prefecture Ashigarakami-Gun Foreign States 256-0026 Country : Japan Chronology : September 2021 ๏ฝDecember 2021 During the development of the new model vehicle, it was discovered that a particular replacement air brake hose
assembly did not have the manufacturer designation on the air brake hose
end fittings. Investigation revealed that a replacement air brake hose
assembly was sold via a Hino dealer and installed in a single vehicle. No other affected vehicles were identified. January 17, 2022 Based on the investigation above, Hino confirmed that the subject air brake hose
assembly meets all requirements of FMVSS 106 with the exception of the manufacturerโs designation specifically required for assemblies under FMVSS 106 S7.2.3. Therefore, Hino has determined to perform a recall on the air brake hose
assemblies which were distributed through the service parts network. Description of Remedy : Description of Remedy Program : For the subject affected vehicle, the dealer will directly contact the owner and replace the subject hose free of charge. How Remedy Component Differs from Recalled Component : The remedy air brake hose
assembly has the manufacturer designation on the end fittings. Identify How/When Recall Condition was Corrected in Production : N/A Part 573 Safety Recall Report 22V-021 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-021 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Hino Motors Sales U.S.A., Inc. Submission Date : FEB 23, 2022 NHTSA Recall No. : 22V-021 Manufacturer Recall No. : AANT0 Manufacturer Information : Manufacturer Name : Hino Motors Sales U.S.A., Inc. Address : 45501 Twelve Mile Road Novi MI 48377 Company phone : 248-699-9300 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 HINO NJ8A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : ALL Power Train : DIESEL Descriptive Information : Hino identified a single subject vehicle with a replacement air brake hose
assembly in which the end fittings of that air brake hose
lacked a manufacturer designation. The single replacement air brake hose
assembly identified did not contain a manufacturer designation pursuant to 49 C.F.R. 571.106 S7.2.2(b) and 49 C.F.R. 571.106 S7.2.3.1. The single replacement air brake hose
assembly was distributed through the Service Parts Network. Production Dates : JAN 31, 2020 – JAN 31, 2020 VIN Range 1 : Begin : 5PVNJ8AV6M5T50057 End : 5PVNJ8AV6M5T50057 Not sequential VIN Range 2 : Begin : 5PVNJ8AV6M5T50057 End : 5PVNJ8AV6M5T50057 Not sequential Description of Noncompliance : Description of the Noncompliance : The single replacement air brake hose
assembly end fitting did not contain the manufacturer designation requirement of FMVSS No.106 S7.2.2 (b) and FMVSS No.106 S7.2.3.1. FMVSS 1 : 106 – Brake hoses FMVSS 2 : NR Description of the Safety Risk : Hino identified a single vehicle with an air brake hose
end fitting that did not contain the manufacturer designation pursuant to FMVSS No.106 S7.2.2 (b) and FMVSS No.106 S7.2.3.1. Hino has determined the single subject air brake hose
end fitting, although missing the manufacturerโs designation, met all of the performance requirements of FMVSS 106. The single subject air brake hose
end fitting may not be traceable should there be a performance concern, increasing the risk of a crash, injury, or fire. Part 573 Safety Recall Report 22V-021 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of the Cause : A change in the supplier that provided the replacement part air brake hose
assembly resulted in the missing manufacturer designation on a single air brake hose
assembly installed as a replacement on a single vehicle. Identification of Any Warning that can Occur : N/A Involved Components : Component Name 1 : HOSE SUB-ASSY, AIR Component Description : AIR BRAKE HOSE
Component Part Number : S4703-E0W40 Supplier Identification : Component Manufacturer Name : MEIJI FLOW SYSTEMS CO., LTD. Address : Kasei-Machi 31-7, Nobusawa Kanagawa Prefecture Ashigarakami-Gun Foreign States 256-0026 Country : Japan Chronology : September 2021 ๏ฝDecember 2021 During the development of the new model vehicle, it was discovered that a particular replacement air brake hose
assembly did not have the manufacturer designation on the air brake hose
end fittings. Investigation revealed that a replacement air brake hose
assembly was sold via a Hino dealer and installed in a single vehicle. No other affected vehicles were identified. January 17, 2022 Based on the investigation above, Hino confirmed that the subject air brake hose
assembly meets all requirements of FMVSS 106 with the exception of the manufacturerโs designation specifically required for assemblies under FMVSS 106 S7.2.3. Therefore, Hino has determined to perform a recall on the air brake hose
assemblies which were distributed through the service parts network. Part 573 Safety Recall Report 22V-021 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : For the subject affected vehicle, the dealer directly contacted the owner and replaced the subject hose free of charge on February 8, 2022. How Remedy Component Differs from Recalled Component : The remedy air brake hose
assembly has the manufacturer designation on the end fittings. Identify How/When Recall Condition was Corrected in Production : N/A Recall Schedule : Description of Recall Schedule : On or before February 8, 2022, the single brake hose
assembly for this single subject vehicle was repaired and replaced by the dealer without charge to the owner. Notification of the noncompliance to the dealer and owner was completed on or before February 8, 2022. Planned Dealer Notification Date : FEB 08, 2022 – FEB 08, 2022 Planned Owner Notification Date : FEB 08, 2022 – FEB 08, 2022 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





