May 9, 2022 NHTSA CAMPAIGN NUMBER: 22V313000
Cracked LP Gas Quick Disconnect Fitting
A gas leak in the presence of an ignition source can increase the risk of a fire.
NHTSA Campaign Number: 22V313
Manufacturer Winnebago
Industries, Inc.
Components EQUIPMENT
Potential Number of Units Affected 207
Summary
Winnebago
Industries, Inc. (Winnebago
) is recalling certain 2021-2023 Ekko vehicles. The quick disconnect fittings in the LP gas system may be cracked, causing a gas leak.
Remedy
Dealers will replace the quick disconnect fittings, free of charge. Owner notification letters were mailed June 22, 2022. Owners may contact Winnebago
customer service at 1-641-585-6939 or 1-800-537-1885.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
INSTRUCTIONS TO PERFORM RECALL CAMPAIGN 166
Models Affected:
Certain Model Year Winnebago
Certain 2021-2023 Ekko (622A) Motorhomes.
These motorhomes were manufactured from January 8, 2021, through April 27, 2022.
Tools Required:
- Tool to cut LP hose
- Digital Camera
Procedure:
1. Record and Verify the Serial Number of the coach is affected by recall 166.
2. Prior to giving the customer his new replacement hose. Take possession of the original hose assembly that came with his coach.
3. Customer is free to go.
4. Take the original hose received from the customer and cut the hose in half.
5. Take a digital photo showing that the hose was cut in two.
6. Discard/Scrap both parts of the hose.
7. Send in the digital photo with the completed warranty reimbursement claim.
22V313 – Chronology
In mid-May 2021, Grand Design, identified cracked LP quick connect fittings which appeared to be production related. Grand Design communicated the issue to the supplier, Enerco Flex-Tech. Enerco Flex-Tech did not communicate any potential safety issues, advised the issue appeared to be one of quality control/production, and advised that it would make process improvements to the component manufacturing. Upon review, no field failures were identified. Subsequently, over the following approximate 9-to-10-month period, Grand Design occasionally identified Enerco Flex-Tech cracked fittings upon receipt, or during production quality checks. After each finding, Grand Design communicated with the supplier which continued to assure the issue was one of manufacturing quality assurance. Given vendor feedback, Grand Design did not identify a potential safety-related concern. In March 2022, Winnebago
Towable identified additional Enerco Flex-Tech cracked fittings in production. On April 7, 2022, Winnebago
Industries opened an investigation to assess the situation at Grand Design and across its associated companies. Inventory was inspected, and warranty claims were analyzed. Approximately mid-April, Winnebago
was advised of a pending recall by another OEM regarding a similar issue. On or about April 18, 2022, Grand Design was able to re-create cracked fittings at specified torque and sent sample parts to a third-party engineering consultant for analysis. On or about April 20, 2022, Enerco Flex-Tech advised Winnebago
that it was filing a defect report with NHTSA regarding the component and issue. About May 3, 2022, Grand Design’s third-party engineering consultant offered the tentative opinion that the cause of the cracks is over-tightening of the transition fitting between the valve body and manifold by the supplier during their manufacturing process. That same day, Winnebago
’s product safety committee met and decided to file a defect information report with NHTSA.
There are no known field issues on Winnebago
Ekko products impacted by this recall.
3 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| WINNEBAGO | EKKO | 2021-2023 |
8 Associated Documents
Recall Acknowledgement
RCAK-22V313-3436.pdf 646.013KB
Defect Notice 573 Report
RCLRPT-22V313-2488.PDF 214.817KB
Remedy Instructions and TSB
RCRIT-22V313-3446.pdf 308.087KB
Recall Quarterly Report #1, 2022-2
RCLQRT-22V313-7100.PDF 211.131KB
Recall Quarterly Report #2, 2022-3
RCLQRT-22V313-1275.PDF 211.223KB
Recall Quarterly Report #3, 2022-4
RCLQRT-22V313-4284.PDF 211.311KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V313-1891.pdf 125.093KB
Miscellaneous Document – Chronology
RMISC-22V313-4145.pdf 49.575KB
Latest Recalls Documents
- 【 Premium Brass Construction】Made of high quality brass material. Durability & leak-free.
- 【Widely Application】Standard 3/4" brass garden hose thread works great with any Garden hose thread sprayer, sprinklers, faucet, lances, nozzle and other irrigation accessories.
- 【No Leak】Pruduce by precision process, easy on and off, pull back female connector and insert male connetor. The hose thread could connect hose tightly with no leak.
- 【Can Stand Up to 200 PSI】Quick Connector stand up to 200 PSI, offer continuous water flow.
- 【Package Includes】6 x brass male quick connectors, 6 x brass female swivel connectors, 6 x rubber self locking washers.
- PACKAGE INCLUDING: Female quick connectors*6, male quick connectors*6, and extra garden hose rubber washers*6.
- UNIVERSALLY COMPATIBLE: This aluminum garden hose quick connectors with 3/4" garden hose thread, fit for all standar garden hose.
- PRECISION DESIGNED: With precision, stronger and lighter processes to ensure NO-Leak and durable performance.
- QUICK & EASY: Easy to connect and disconnect, free your energy and time to maintain your yard, garden, plant, and etc.
- WIDELY USES: can be used with all garden hoses, watering devices, jets, sprinklers, and nozzles, providing versatile connectivity.
- Sufficient Quantity: the package includes 5 pairs (5 female connectors and 5 male connectors) of quick-disconnect hose barb inserts, which can meet the needs of multiple devices at one time or as spare replacements, and the cost-effectiveness is far better to single purchase; The male head and the female head precisely match the 3/8-inch hose and are ready to use out of the box
- Quality Material: the quick-disconnect hose barb insert is made of POM plastic, which is oil-resistant, resistant to weak acids and weak alkalis, non-toxic and odorless, with high hardness and wear-resistant self-lubricating, and can resist frequent plugging and unplugging; The service life is far longer than that of ordinary plastic connectors, and it is suitable for sensitive fluids such as beer and fuel
- Quick Plug-in and Pull-out: stainless steel spring buckle design, "click" to lock, one-handed operation to easily disconnect, save time and effort, and greatly improve the efficiency of maintenance or replacement
- Pressure and Temperature Resistance: the quick-disconnect hose barb insert can withstand 80 PSI pressure, Temperature range -40°F to 180°F (-40°C to 82°C), compatible with high-temperature steam, cold water, compressed air and so on
- Double Stop Valve Design, Leak-proof: both male and female heads are equipped with automatic closing valves, the pipeline instantly forms a channel when connected, and the two ends are instantly sealed when disconnected, completely preventing liquid leakage or gas reflux, ensuring that the pipeline is clean and pollution-free, especially suitable for harsh scenarios such as beer brewing, fuel transportation, chemical fluids and so on
- 【Solid Brass Hose Quick Connect】This hose quick connectors are with solid brass construction, heavy duty and rust proof, lasts season-after-season
- 【3/4 Inch Garden Hose Quick Connector】Standard 3/4 Inch GHT thread water hose quick connectors, work with standard garden hose (NOT Auto Shut Off)
- 【Easy Connect and Disconnect】The quick release allows to easy attach and removal of hose, just pull back the female connector and insert the male end, no tools required
- 【No Leak Hose Quick Connect Fittings】Precision design garden hose thread, will tightly fit the hose to prevent leakage
- 【What Will You Receive】The package includes 2pcs male hose connector, 2pcs female hose connector and 2pcs extra rubber washers; You can also enjoy our thoughtful customer service, if get any problem please feel free to contact us
- ★【Standard 3/4 Inch GHT Garden Hose Quick Connect】-This garden hose quick connect sets including 2 brass female connectors + 2 brass male connectors+4 free washers.Use this hose quick connect fittings You can enjoy it work perfectly with any standard garden hose,faucets,hose bibs and watering devices.
- ★【Durable And Solid Brass Construction Water Hoses Connector】-The quick connect garden hose fittings Standard 3/4 inch GHT water hose quick connector fits all types of garden hoses. garden hose quick connect fittings most solid brass which means durability & leak-free. No cheap and flimsy aluminum or plastic material.Note: our thread is GHT, should connect with GHT female thread, if you connect with another thread possible leak
- ★【Quick Connect Garden Hose Fittings】-The water hose quick connect fittings Stand up to 200 PSI,gives the Easy Connect Fitting continuous water flow and it’s a great tool to complete your garden accessories and water hose connect.Easy to connect and disconnect.
- ★【Quick & Easy Connector】- The quick connect hose fittings 1-Handed Operation.You can save much time using the quick connect sets install in spigot, hose end and nozzle. Easy Off-And-On adapter provides a tight, secure Fit, no-Leak connection.
- ★【Water Hose Quick Connect with 3 Years Warranty】The best brass garden quick connectors for your garden hose.buy this hose quick connect You can reply on our service of 3 years guarantee.
SEOCONTENT-START
IMPORTANT SAFETY RECALL NHTSA Safety Recall 22V-313 THIS NOTICE APPLIES TO YOUR VEHICLE. RE: BODY SERIAL CHASSIS SERIAL Dear Owner: This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Our records indicate that you have purchased a vehicle with the serial number which appears above. REASON FOR THIS RECALL Winnebago
has decided that a defect related to motor vehicle safety exists on certain 2021- 2023 Ekko motorhomes. These motor homes were manufactured January 08, 2021 through April 27, 2022. The loose LP hose used to hook up the exterior cooktop has a quick disconnect fitting on the end of the hose assembly that may have a crack which could result in propane leak increasing the risk of fire. WHAT WE WILL DO Winnebago
has worked with the hose assembly manufacturer to provide you a new replacement hose assembly. Exchanging these hose assemblies will be at no charge to you. WHAT YOU SHOULD DO Do not use the exterior cooktop until you have received your replacement hose. Please contact your Winnebago
dealer to arrange for an appointment. The labor time necessary to perform the hose exchange should take a few minutes. Original hose must be given to the dealer for disposal before replacement hose will be provided. Winnebago
Motorhome dealers are best equipped to obtain parts and provide service to ensure your vehicle is corrected as promptly as possible. However, if you take your vehicle to the dealer on the agreed date and they do not service this condition on that date or within five days, we recommend you contact Winnebago
, Attn.: Customer Care at (641) 585-6939 or (800) 537- 1885. If you are still unable to obtain such service without charge to you and within a reasonable time, you may contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue S.E., Washington, DC 20590 or call the toll-free y Hotline at 1-888-327-4236 [TTY: (800) 424-9153] or go to http://www.safercar.gov. IF YOU HAVE PREVIOUSLY PAID FOR THIS REPAIR If you have paid to remedy this issue, you may be eligible for a refund. To obtain information on a refund, contact Winnebago
Customer Care by email at [email protected] or write us at Customer Care Department, P.O. Box 152, Forest City, Iowa 50436 or by telephone at (641) 585-6939 or (800) 537-1885. IF YOU HAVE CHANGED ADDRESS OR SOLD THE VEHICLE If you have changed address, sold, or traded your vehicle, please let us know by contacting Winnebago
Customer Care by email at [email protected] or in writing at Customer Care Department, P.O. Box 152, Forest City, Iowa 50436 or by telephone at (641) 585-6939 or (800) 537-1885. Presentation of this letter to the service center will assist in making the necessary correction to your vehicle in the shortest possible time. Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your safety and continued satisfaction with our products. This letter does not constitute an acknowledgement of legal liability. Winnebago
Industries Forest City, Iowa 50436 Enclosure
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-313 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Submission Date : Winnebago
Industries, Inc. MAY 09, 2022 NHTSA Recall No. : 22V-313 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Winnebago
Industries, Inc. Address : PO BOX 152 605 W. Crystal Lake Rd. Forest City IA 50436 Company phone : 1-641-585-3535 Population : Number of potentially involved : 207 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2023 Winnebago
Ekko Vehicle Type : Body Style : Power Train : NR Descriptive Information : The recall population was determined by identifying all Ekko models with a tailgate package. The Enerco Flex-Tech LP quick disconnect is only provided in this model with the tailgate package. Production Dates : JAN 08, 2021 – APR 27, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : LP gas quick disconnects manufactured and supplied by Enerco Flex-Tech are cracking after being assembled. In some cases, the cracking may result in a propane leak. Neither Winnebago
Industries nor any of its associated brands are aware of any injuries or deaths associated with this issue. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A cracked LP quick disconnect fitting may lead to a propane leak, which increases the risk of a fire. In all cases, the fittings at issue are located outside the living quarters of the RV (underneath or at an outside kitchen) for all Winnebago
Industries and associated brand vehicles. Description of the Cause : When the fitting is tightened, the female housing may crack. We are informed that the supplier, Enerco Flex-Tech, has not identified root cause at this time, although it is preliminarily believed that the issue is related to an interference between the male and female parts in the connection. While this is not a Winnebago
Industries component, and was not manufactured to any Winnebago
Industries specification, design and/or instruction, out of the Part 573 Safety Recall Report 22V-313 Page 2 Identification of Any Warning that can Occur : interests of safety, Winnebago
Industries commenced an independent analysis of the issue, including the resources of a third-party engineering consultant, which remains ongoing. A customer may notice the smell of LP gas near the quick disconnect fitting or visibly notice a crack in the fitting. Involved Components : Component Name 1 : Hose ASM LP Component Description : Auxiliary LP Hose Component Part Number : 344074-01-000 Supplier Identification : Component Manufacturer Name : Enerco Group Inc. Address : 4560 West 160 St Cleveland Ohio 44135 Country : United States Chronology : In mid-May 2021, Grand Design, identified cracked LP quick connect fittings which appeared to be production related. Grand Design communicated the issue to the supplier, Enerco Flex-Tech. Enerco Flex-Tech did not communicate any potential safety issues, advised the issue appeared to be one of quality control/production, and advised that it would make process improvements to the component manufacturing. Upon review, no field failures were identified. Subsequently, over the following approximate 9-to-10-month period, Grand Design occasionally identified Enerco Flex-Tech cracked fittings upon receipt, or during production quality checks. After each finding, Grand Design communicated with the supplier which continued to assure the issue was one of manufacturing quality assurance. Given vendor feedback, Grand Design did not identify a potential safety-related concern. In March 2022, Winnebago
Towable identified additional Enerco Flex-Tech cracked fittings in production. On April 7, 2022, Winnebago
Industries opened an investigation to assess the situation at Grand Design and across its associated companies. Inventory was inspected, and warranty claims were analyzed. Approximately mid- April, Winnebago
was advised of a pending recall by another OEM regarding a similar issue. On or about April 18, 2022, Grand Design was able to re-create cracked fittings at specified torque and sent sample parts to a third-party engineering consultant for analysis. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22V-313 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 On or about April 20, 2022, Enerco Flex-Tech advised Winnebago
that it was filing a defect report with NHTSA regarding the component and issue. About May 3, 2022, Grand Design’s third-party engineering consultant offered the tentative opinion that the cause of the cracks is over-tightening of the transition fitting between the valve body and manifold by the supplier during their manufacturing process. That same day, Winnebago
’s product safety committee met and decided to file a defect information report with NHTSA. Description of Remedy : Description of Remedy Program : The remedy to correct this defect will involve the replacement of all suspect components with new components with a different design. The remedy will be performed by Winnebago
Dealers at no cost to the consumer. If a consumer has paid to remedy this issue, they may be eligible for reimbursement. Reimbursement information can be obtained by contacting Winnebago
Customer Care. How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production : All suspect components will be replaced with new components with different design. The recall condition is corrected in production with all suspect components being replaced with new components with different design. Recall Schedule : Description of Recall Schedule : Owner and dealer notifications will be sent within the 60 day requirement. Planned Dealer Notification Date : JUL 01, 2022 – JUL 01, 2022 Planned Owner Notification Date : JUL 01, 2022 – JUL 01, 2022 * NR – Not Reported
SEOCONTENT-END
This product presentation was made with AAWP plugin.





