June 22, 2022 NHTSA CAMPAIGN NUMBER: 22V443000
Emergency Braking System May Not Engage
A loss of braking ability can increase the risk of a crash.
NHTSA Campaign Number: 22V443
Manufacturer Daimler Trucks
North America, LLC
Components SERVICE BRAKES
Potential Number of Units Affected 17
Summary
Daimler Trucks
North America, LLC (DTNA) is recalling certain 2022 Freightliner
Cascadia vehicles. The emergency braking system may not engage, resulting in the loss of braking ability.
Remedy
Dealers will install a double check valve, free of charge. Owner notification letters were mailed December 22, 2022. Owners may contact DNTA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-941.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check for Daimler Trucks North America Recalls
There will be no Dealer Notification for safety recall 22V-339, 22V443, 22V456, 22V468.
DTNA has tracked all of the vehicles in this limited population and knows with certainty that none of the vehicles remain in the hands of a dealership. Due to the limited population subject to the recall, DTNA will work with the lone customer to get the vehicles repaired. Therefore, no dealership letter is needed in this unique case.
Chronology :
In calendar year 2021, DTNA theorized that a failure of two independent systems at the same time could cause some lack of brake functionality but considered the likelihood of occurrence so low as to not present an unreasonable risk to motor vehicle safety. In February 2022, DTNA was able to create the simultaneous occurrence of those two failures on a test vehicle, with no accident occurring.
DTNA promptly began an investigation of the regulatory and safety impacts. At that time, DTNA determined that the system is compliant with all applicable regulations, including (but not limited to) the emergency brake provisions of FMVSS 121. DTNA considered various safety modes of operation. To the best of DTNA’s knowledge, there are zero warranty claims and zero field reports concerning this issue.
DTNA is not aware of any death or injury related to this issue. On June 15, 2022, DTNA decided that, although the likelihood of the dual-simultaneous occurrences being extremely low, that out of an abundance of caution DTNA would perform a voluntary safety recall campaign for this very specific group of vehicles.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| FREIGHTLINER | CASCADIA | 2022 |
9 Associated Documents
Defect Information Report
RMISC-22V443-0825.pdf 788.264KB
Recall Acknowledgement
RCAK-22V443-1625.pdf 645.764KB
Defect Notice 573 Report
RCLRPT-22V443-8098.PDF 213.671KB
Amended Defect Information Report
RMISC-22V443-3426.pdf 805.711KB
Recall 573 Report – June 28, 2022
RCLRPT-22V443-8244.PDF 213.964KB
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-22V443-3929.pdf 148.993KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V443-7524.pdf 360.714KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V443-6143.pdf 326.689KB
Recall Quarterly Report #1, 2022-4
RCLQRT-22V443-1365.PDF 211.142KB
Latest Recalls Documents
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER – BUILT FOR DIESEL DIAGNOSTICS:The ANCEL X7HD PRO combines full-system diagnostics, bi-directional control, ECU coding, HDOBD/OBD2 functions, and 42+ reset services in one powerful heavy duty truck scanner. This diesel scan tool helps technicians, fleet owners, and repair shops diagnose problems faster, reduce downtime, and complete more repairs without switching between multiple truck diagnostic tools. Features a 10.1" Android tablet, Bluetooth & Wi-Fi, live data graphing, and 2 years of f-ree updates
- 42+ RESET FUNCTIONS – MORE THAN A BASIC TRUCK CODE READER:Perform essential service functions including forced DPF regeneration, injector coding, speed limiter adjustment, idle adjustment, oil reset, ABS reset, SRS reset, EPB reset, throttle reset, and suspension calibration. Designed for real truck maintenance and fleet service, this commercial truck diagnostic scanner helps reduce dealer visits, avoid unnecessary downtime, and handle more repair jobs with one diesel diagnostic tool
- ACTIVE TEST & ECU CODING – ADVANCED BIDIRECTIONAL SCAN TOOL FOR TRUCKS:Quickly locate faults by activating components and sending commands directly to vehicle systems. Test injectors, ABS, throttle, cooling systems, and other modules in real time without unnecessary disassembly. ECU coding and module matching help adapt replacement parts, restore factory settings, and reduce repeat repairs, making this semi truck scan tool ideal for advanced troubleshooting and daily shop work
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS – WIDE TRUCK & ENGINE COVERAGE:Read and clear codes, monitor live data, freeze frame, and diagnose engine, transmission, ABS, body, and other major systems. Compatible with Freightliner
, Kenworth
, Peterbilt
, Volvo
, Mack
, International
, and other commercial truck brands, plus Cummins
, Caterpillar
, Detroit, Paccar
, and Navistar
diesel engines. Also supports full OBD2/EOBD diagnostics for standard vehicles, making it a versatile truck obd2 scanner for mixed fleets and repair shops - PROFESSIONAL HARDWARE + RELIABLE SUPPORT – BUILT FOR DAILY SHOP USE:This professional diesel diagnostic computer features a 10.1" touchscreen, Android 10.0 system, 6000mAh battery, Bluetooth/Wi-Fi connectivity, and built-in front & rear cameras for documenting repairs and remote troubleshooting. Includes 2 years of fr-ee updates, 1-year w-arranty, and responsive technical support. Contact [email protected] before purchase to confirm compatibility and supported functions for your truck or diesel engine
- 【Built for Heavy Duty Diesel Diagnostics】Designed for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisions—saving time, reducing downtime, and avoiding unnecessary shop visits
- 【Full System Diagnostics+All HD OBD Modes】The New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehicles—digging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but why—so you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner
, Kenworth
, Peterbilt
, Volvo
, International
, Detroit, Cummins
, Paccar
, Allison, Eaton
, Bendix
, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed - 【Speaks Major Truck Protocol】The New HD601 diesel truck scanner is built for American-made trucks—and supports the heavy‑duty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765‑4, ISO 14230‑4, ISO 9141‑2, J1850 PWM/VPW, ISO 27145‑4, and EURO‑6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosing—no guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourself—in minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- 【One Tool, Total Fleet Coverage: 6/9/16 Pin Ready】Featuring an integrated 16-pin OBD2 connector and professional-grade 6-pin & 9-pin adapters, this heavy duty truck scanner provides extensive support for J1939, J1708, J1587, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 protocols. It offers reliable diagnostic coverage for major American diesel brands—including Cummins
, Paccar
, Caterpillar
, Detroit, and Freightliner
—making it a versatile semi truck scanner for managing any diverse fleet. - 【2 in 1 Diesel Code Reader & Advanced HD OBDII】Equipped with professional-grade diesel scanner capabilities, the HD301 features intuitive Read/Erase codes and turn off the "Check Engine" light. With the built-in DTC Lookup library, you can instantly access fault code definitions on-device without searching the internet. It also retrieves hundreds of essential live sensor data—such as coolant temperature, fuel pressure, and engine RPM—in a stable text format for precise and rapid troubleshooting. (Please note that the HD301 can not support DPF Regen.)
- 【Full System Truck Diagnostic】The FOXWELL HD301 heavy duty scan tool is engineered to deeply access and scan all available electronic control modules specifically for truck, including Engine, Transmission, ABS, SRS, Chassis, and Body Control. This professional truck scanner diagnostic tool allows you to identify issues across the entire vehicle, ensuring your rig stays in peak condition for the long haul.
- 【Versatile for most big Rigs: Commercial, Passenger & Beyond】Engineered for more than just trucks, this heavy duty scan tool offers extensive coverage for pickups, buses, trailers, and even marine vessels. From construction machinery (excavators, loaders) to agricultural equipment (tractors, harvesters), it provides a true all-in-one diagnostic solution.
- 【Plug-and-Play & No Subscription】Designed for the road! No WiFi, no batteries, and no complex App setup required. Simply plug it into your vehicle’s diagnostic port to start scanning immediately. Enjoy lifetime free software updates to keep your HD301 diesel truck scanner current with the latest vehicle models and features—without any hidden subscription fees—While overcoming language barriers with support for Spanish and English.
- 🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
- 🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
- 🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc
- Diagnose Heavy-Duty Truck Problems Fast — Read and clear fault codes and diagnose warning light issues on many Class 4–8 diesel trucks including Freightliner
, Peterbilt
, Kenworth
, Volvo
, Mack
and Cummins
-powered vehicles - Help Reduce Downtime & Repair Costs — It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Quickly check engine faults, view live truck data and identify issues before expensive repair shop visits or unnecessary repairs
- No complicated setup required — Simple menus and built-in DTC explanations make this truck code reader easy to use for owner-operators, mobile mechanics and small fleet maintenance
- Live Data & Built-in DTC Lookup — View real-time engine data and built-in truck fault code definitions directly on the scanner to help understand vehicle problems faster without searching through manuals
- Free Lifetime Updates & Technical Support — Includes free software updates plus responsive technical support for setup, compatibility and everyday truck diagnostics
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Defect / Noncompliance Information Report (Section 573.6) FL-941 Date of Submission: June 28, 2022 (Amended) Manufacturer: Daimler Truck North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: X Safety Defect ⃝ Non-Compliance Vehicle Information Model Yr. Start: 2022 Model Yr. End: 2022 Make: Freightliner
Model: Cascadia Production Dates: Begin: October 28, 2021 End: December 17, 2021 Descriptive Information: Specific vehicles with a limited production braking system. Basis for Determination of the Recall Population: All Specific limited production vehicles with this design are included. Number potentially involved: 17 Estimated percentage of involved with defect: 100% Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: In certain specific scenarios where the primary brake system loses functionality and at the same time, the redundant braking system fails, two unlikely events that would need to occur independently and simultaneously, there is the possibility that the emergency braking system would not engage. Describe the safety risk: If the emergency braking system does not engage when it is required, loss of braking ability may occur which increases the risk of a crash. Identify any warning which can precede or occur: An amber warning light and a low air indicator will both appear on the dash when braking systems are not functioning properly. If applicable, identify the manufacture of the defective or noncompliant component.: Bendix
Commercial Vehicle Systems, LLC 3550 Chester Road Avon OH 44011 1-440-329-9000 Involved Components Component Name: Valve Component Description: Double check valve Component Part Number: BW 278614 Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision: In calendar year 2021, DTNA theorized that a failure of two independent systems at the same time could cause some lack of brake functionality but considered the likelihood of occurrence so low as to not present an unreasonable risk to motor vehicle safety. In February 2022, DTNA was able to create the simultaneous occurrence of those two failures on a test vehicle, with no accident occurring. DTNA promptly began an investigation of the regulatory and safety impacts. At that time, DTNA determined that the system is compliant with all applicable regulations, including (but not limited to) the emergency brake provisions of FMVSS 121. DTNA considered various safety modes of operation. To the best of DTNA’s knowledge, there are zero warranty claims and zero field reports concerning this issue. DTNA is not aware of any death or injury related to this issue. On June 15, 2022, DTNA decided that, although the likelihood of the dual-simultaneous occurrences being extremely low, that out of an abundance of caution DTNA would perform a voluntary safety recall campaign for this very specific group of vehicles. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufacture’s plan for reimbursement. A double check valve will be added to all vehicles. Repairs will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with owner’s notification letter. Owners are directed to seek reimbursement through authorized dealers. Identify the Recall Schedule Describe the recall schedule for notifications.: Customer notification will be made by first class mail using Daimler Trucks
North America records to determine the customers affected. Planned Dealer Notification Begin Date: August 21, 2022 Planned Dealer Notification End Date: August 21, 2022 Planned Owner Notification Begin Date: August 21, 2022 Planned Owner Notification End Date: August 21, 2022 Does DTNA plan to file inconsequentiality petition? ⃝ Yes X No Manufacturer’s identification code for this recall (if applicable): FL-941 DTNA Representative; Sam Geser Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Defect / Noncompliance Information Report (Section 573.6) FL-941 Date of Submission: June 22, 2022 Manufacturer: Daimler Truck North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: X Safety Defect ⃝ Non-Compliance Vehicle Information Model Yr. Start: 2022 Model Yr. End: 2022 Make: Freightliner
Model: Cascadia Production Dates: Begin: October 28, 2021 End: December 17, 2021 Descriptive Information: Specific vehicles with a limited production braking system. Basis for Determination of the Recall Population: All Specific limited production vehicles with this design are included. Number potentially involved: 17 Estimated percentage of involved with defect: 100% Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: In certain specific scenarios where two unlikely events occur independently and simultaneously, there is the possibility that the emergency braking system would not engage. Describe the safety risk: If the emergency braking system does not engage when it is required, loss of braking ability may occur which increases the risk of a crash. Identify any warning which can precede or occur: An amber warning light and a low air indicator will both appear on the dash when braking systems are not functioning properly. If applicable, identify the manufacture of the defective or noncompliant component.: This is not applicable because there is not a defective part involved. Involved Components Component Name: N/A Component Description: N/A Component Part Number: N/A Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision: In calendar year 2021, DTNA theorized that a failure of two independent systems at the same time could cause some lack of brake functionality but considered the likelihood of occurrence so low as to not present an unreasonable risk to motor vehicle safety. In February 2022, DTNA was able to create the simultaneous occurrence of those two failures on a test vehicle, with no accident occurring. DTNA promptly began an investigation of the regulatory and safety impacts. At that time, DTNA determined that the system is compliant with all applicable regulations, including (but not limited to) the emergency brake provisions of FMVSS 121. DTNA considered various safety modes of operation. On June 15, 2022, DTNA decided that, although the likelihood of the dual-simultaneous occurrences being extremely low, that out of an abundance of caution DTNA would perform a voluntary safety recall campaign for this very specific group of vehicles. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufacture’s plan for reimbursement. A double check valve will be added to all vehicles. Repairs will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with owner’s notification letter. Owners are directed to seek reimbursement through authorized dealers. Identify the Recall Schedule Describe the recall schedule for notifications.: Customer notification will be made by first class mail using Daimler Trucks
North America records to determine the customers affected. Planned Dealer Notification Begin Date: August 21, 2022 Planned Dealer Notification End Date: August 21, 2022 Planned Owner Notification Begin Date: August 21, 2022 Planned Owner Notification End Date: August 21, 2022 Does DTNA plan to file inconsequentiality petition? ⃝ Yes X No Manufacturer’s identification code for this recall (if applicable): FL-941 DTNA Representative; Tiffani Torgeson Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Daimler Truck North America LLC August 2022 FL941 Interim Recall Notice NHTSA #22V-443 IMPORTANT SAFETY RECALL See enclosed VIN list Subject: Cascadia Braking Issue This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Daimler Truck North America LLC (DTNA), on behalf of its Freightliner
Trucks Division, has decided that a defect which relates to motor vehicle safety exists in certain Model Year 2022 Freightliner
Cascadia Vehicles manufactured October 28, 2021, through December 17, 2021. The emergency braking system may not engage, which can result in the loss of braking ability, which increases the risk of a crash. This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. Daimler Truck is currently securing replacement parts. There is no action for you to take at this time. The second notice will inform you when the free, final remedy is available. When you receive the second notice, please contact your authorized Daimler Truck North America dealer to schedule the Recall for your vehicle. If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address [email protected]. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to http://www.nhtsa.gov. We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety. WARRANTY CAMPAIGNS DEPARTMENT Enclosure Daimler Trucks
North America LLC Warranty Campaigns Department P.O. Box 4090 Portland, OR 97208-4090 800.547.0712 Phone
**************************************************************************************************************
Daimler Truck North America LLC December 2022 FL941 Recall Notice NHTSA #22V-443 IMPORTANT SAFETY RECALL This notice applies to your vehicle(s), see enclosed VIN list. Subject: Cascadia Braking Issue This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Daimler Truck North America LLC (DTNA), on behalf of its Freightliner
Trucks Division, has decided that a defect, which relates to motor vehicle safety, exists in certain Model Year 2022 Freightliner
Cascadia Vehicles manufactured October 28, 2021, through December 17, 2021. The emergency braking system may not engage, which can result in the loss of braking ability, which increases the risk of a crash. Vehicles will receive an additional double check valve installed at the foot pedal. Repairs will be completed by Daimler Truck North America authorized service facilities. The Recall will take approximately 1 hour and will be performed at no charge to you. This is the second notice regarding this recall. The final recall repair is now available. Please contact an authorized Daimler Truck North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at Daimler-TruckNorthAmerica.com/Contact-us. Scroll down to “Locate a Dealer” and select the appropriate brand. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna- dlrinfo.prd.freightliner
.com:48518/VinLookup/vin-module/getVinLookupPage. If you do not own the vehicle that corresponds to the identification number(s), which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address [email protected]. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to http://www.nhtsa.gov. We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety. WARRANTY CAMPAIGNS DEPARTMENT Enclosure Daimler Truck North America LLC Warranty Campaigns Department P.O. Box 4090 Portland, OR 97208-4090 800.547.0712Phone
**************************************************************************************************************
Daimler Trucks
North America, LLC 4747 N. Channel Avenue Portland OR 97217-7699 Phone: 503-745-8000 October 07, 2022 Emily Smith Recall Analyst Department of Transportation National Highway Traffic Safety Administration 1200 New Jersey Avenue SE., Washington, DC 20590 Office: 202-366-1060 Subject: Letter in-lieu of a Dealer Notification NHTSA SB No. 22V-339, 22V443, 22V456, 22V468 Manufacturer number: FL932, FL941, FL943, FL945 Ms. Smith, There will be no Dealer Notification for safety recall 22V-339, 22V443, 22V456, 22V468. DTNA has tracked all of the vehicles in this limited population and knows with certainty that none of the vehicles remain in the hands of a dealership. Due to the limited population subject to the recall, DTNA will work with the lone customer to get the vehicles repaired. Therefore, no dealership letter is needed in this unique case. Please contact me if you have any questions. Sincerely, Sam Geser Sam Geser Manager, Compliance and Regulatory Affairs Daimler Trucks
North America Sam Geser Product Defect Investigation Engineering Manager Compliance and Regulatory Affairs
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-443 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Trucks
North America, LLC Submission Date : JUN 28, 2022 NHTSA Recall No. : 22V-443 Manufacturer Recall No. : FL-941 Manufacturer Information : Manufacturer Name : Daimler Trucks
North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 17 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Freightliner
Cascadia Vehicle Type : Body Style : Power Train : NR Descriptive Information : Specific vehicles with a limited production braking system. Production Dates : OCT 28, 2021 – DEC 17, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : In certain specific scenarios where the primary brake system loses functionality and at the same time, the redundant braking system fails, two unlikely events that would need to occur independently and simultaneously, there is the possibility that the emergency braking system would not engage. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : If the emergency braking system does not engage when it is required, loss of braking ability may occur which increases the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : An amber warning light and a low air indicator will both appear on the dash when braking systems are not functioning properly Involved Components : Part 573 Safety Recall Report 22V-443 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Valve Component Description : Double check valve Component Part Number : BW 278614 Supplier Identification : Component Manufacturer Name : Bendix
Commercial Vehicle Systems, LLC Address : 3550 Chester Road Avon Ohio 44011 Country : United States Chronology : In calendar year 2021, DTNA theorized that a failure of two independent systems at the same time could cause some lack of brake functionality but considered the likelihood of occurrence so low as to not present an unreasonable risk to motor vehicle safety. In February 2022, DTNA was able to create the simultaneous occurrence of those two failures on a test vehicle, with no accident occurring. DTNA promptly began an investigation of the regulatory and safety impacts. At that time, DTNA determined that the system is compliant with all applicable regulations, including (but not limited to) the emergency brake provisions of FMVSS 121. DTNA considered various safety modes of operation. To the best of DTNA’s knowledge, there are zero warranty claims and zero field reports concerning this issue. DTNA is not aware of any death or injury related to this issue. On June 15, 2022, DTNA decided that, although the likelihood of the dual-simultaneous occurrences being extremely low, that out of an abundance of caution DTNA would perform a voluntary safety recall campaign for this very specific group of vehicles. Description of Remedy : Description of Remedy Program : A double check valve will be added to all vehicles. Repairs will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with owner’s notification letter. Owners are directed to seek reimbursement through authorized dealers. How Remedy Component Differs from Recalled Component : NR Part 573 Safety Recall Report 22V-443 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Trucks
North America records to determine the customers affected. Planned Dealer Notification Date : AUG 21, 2022 – AUG 21, 2022 Planned Owner Notification Date : AUG 21, 2022 – AUG 21, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-443 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Trucks
North America, LLC Submission Date : JUN 22, 2022 NHTSA Recall No. : 22V-443 Manufacturer Recall No. : FL-941 Manufacturer Information : Manufacturer Name : Daimler Trucks
North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 17 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Freightliner
Cascadia Vehicle Type : Body Style : Power Train : NR Descriptive Information : Specific vehicles with a limited production braking system. Production Dates : OCT 28, 2021 – DEC 17, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : In certain specific scenarios where two unlikely events occur independently and simultaneously, there is the possibility that the emergency braking system would not engage. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : If the emergency braking system does not engage when it is required, loss of braking ability may occur which increases the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : An amber warning light and a low air indicator will both appear on the dash when braking systems are not functioning properly Involved Components : Part 573 Safety Recall Report 22V-443 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : In calendar year 2021, DTNA theorized that a failure of two independent systems at the same time could cause some lack of brake functionality but considered the likelihood of occurrence so low as to not present an unreasonable risk to motor vehicle safety. In February 2022, DTNA was able to create the simultaneous occurrence of those two failures on a test vehicle, with no accident occurring. DTNA promptly began an investigation of the regulatory and safety impacts. At that time, DTNA determined that the system is compliant with all applicable regulations, including (but not limited to) the emergency brake provisions of FMVSS 121. DTNA considered various safety modes of operation. On June 15, 2022, DTNA decided that, although the likelihood of the dual-simultaneous occurrences being extremely low, that out of an abundance of caution DTNA would perform a voluntary safety recall campaign for this very specific group of vehicles. Description of Remedy : Description of Remedy Program : A double check valve will be added to all vehicles. Repairs will be performed by Daimler Truck North America authorized service facilities. Daimler Truck North America shall be offering a refund for owner-paid repairs covered by this recall if the repair was performed prior to the date indicated in the reimbursement plan, which will be posted with owner’s notification letter. Owners are directed to seek reimbursement through authorized dealers. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Part 573 Safety Recall Report 22V-443 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Trucks
North America records to determine the customers affected. Planned Dealer Notification Date : AUG 21, 2022 – AUG 21, 2022 Planned Owner Notification Date : AUG 21, 2022 – AUG 21, 2022 * NR – Not Reported
SEOCONTENT-END
This product presentation was made with AAWP plugin.





