Cracked LP Gas Quick Disconnect Fitting – 2021-2022 Holiday House 27RQ, 24TB, & 18RB Travel Trailers

November 29, 2022 NHTSA CAMPAIGN NUMBER: 22V882000

Cracked LP Gas Quick Disconnect Fitting

A gas leak in the presence of an ignition source can increase the risk of a fire.

 

NHTSA Campaign Number: 22V882

Manufacturer Holiday House, LLC

Components EQUIPMENT

Potential Number of Units Affected 26

 

Summary

Holiday House, LLC (Holiday House) is recalling certain 2021-2022 27RQ, 24TB, and 18RB travel trailers. The quick disconnect fittings in the LP gas system may be cracked, causing a gas leak.

 

Remedy

Dealers will inspect the quick disconnect and perform a leak test, and replace the quick disconnect, if necessary, free of charge. Owner notification letters were mailed January 9, 2023. Owners may contact Holiday House customer service at 1-574-206-0016.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


REMEDY INSTRUCTIONS
FOR AFFECTED 2021-2022 18RB, 24TB, AND
27RQ TRAVEL TRAILERS

(NHTSA Recall Number: 22V-882)

Dear Valued Dealer:

As you are aware, Holiday House, LLC d/b/a Holiday House RV (โ€œHoliday House RVโ€) has decided that a defect which relates to motor vehicle safety exists in certain 2021-2022 18RB, 24TB, and 27RQ travel trailers.

Specifically, certain travel trailers are equipped with an LP gas Quick Disconnect which may have a defect in the brass which has caused it to crack, or which may increase the likelihood that a crack may develop in the future. A crack may result in a low-pressure propane leak on the outside of the travel trailer, which poses a safety issue to our customers.

These instructions provide a step-by-step guide on how to properly: (1) inspect each customerโ€™s Quick Disconnect to determine if this recall is applicable; and (2) if necessary, remove the affected Quick Disconnect, replace with a new Quick Disconnect, and perform an industry standard LP-gas system validation to ensure that the new Quick Disconnect is functioning properly.

 

Necessary Tools 

In order to inspect and properly replace a customerโ€™s Quick Disconnect, the following tools are required:

  1. Manometer;
  2. Adjustable wrenches;
  3. Yellow pipe tape, or a bottle of LP gas rated pipe sealant;
  4. Clean rags; and
  5. Wire brush.

 

STEP 1: INSPECTING THE QUICK DISCONNECT 

Before inspecting the travel trailer, please ensure that you turn off the LP gas at the LP bottles.  In addition, please disconnect the travel trailerโ€™s battery, and if equipped with a generator, ensure that it is off.  The travel trailer must also be disconnected from shore power.  Finally, please block any tires/wheels to ensure that the vehicle will not roll.

Once you have performed the above procedures, you must inspect the Quick Disconnect to determine whether the Quick Disconnect is subject to this recall.  The Quick Disconnect is generally located on the bottom of the chassis rail on the passenger/curbside of the travel trailer.

Once you have located the Quick Disconnect, examine the rubber dust plug.  If the rubber dust plug is black in color and has โ€œEnerco Groupโ€ etched on the slider, then the Quick Disconnect must be replaced. The Quick Disconnects subject to this recall were manufactured by Enerco or Flex-Tech.  Accordingly, any Quick Disconnect which contains identifiable information that it was manufactured by Enerco or Flex-Tech must be replaced.  Unless the Quick Disconnect can be identified as being manufactured by a company other than Enerco or Flex-Tech, then the Quick Disconnect must be replaced.  If it is clear that the Quick Disconnect was manufactured by a company other than Enerco or Flex-Tech, then the Quick Disconnect is not subject to this recall and does not need to be replaced.  Please note that if the rubber dust cap is blue or yellow, then the Quick Disconnect does not need to be replaced and is not subject to this recall.

 

STEP 2: REPLACING THE QUICK DISCONNECT 

If it is determined that the Quick Disconnect must be removed and replaced in accordance with this recall, you must perform the following:

  • (1)ย Remove the Quick Disconnect: This requires two (2) wrenches. The first wrench must be adjusted to fit the hex flats of the pipe nipple installed into the end of the Quick Disconnect, which then connects to a manifold or bracket connected to an LPG hose. The other wrench must be adjusted to fit the body of the Quick Disconnect, and must be held close to the pipe nipple side of the Quick Disconnect. Keeping steady pressure on the pipe nipple wrench, unthread the Quick Disconnect from the pipe nipple.ย  Once removed, use a wire brush to clean any remaining sealant or debris from the pipe nipple threads and clean off with a rag, ensuring not to get any debris inside of the pipe nipple.
  • (2) Install the new Quick Disconnect: Apply either pipe sealant or yellow tape to the pipe nipple threads.ย  Do not apply pipe sealant inside of the Quick Disconnect.ย  Adjust one wrench to fit the hex flats of the pipe nipple installed into the end of the Quick Disconnect, which then connects to a manifold or bracket connected to an LPG hose.ย  Keep steady pressure on the pipe nipple wrench, and do not allow it to rotate.ย  Hand thread the new Quick Disconnect until it is tight onto the pipe nipple.ย  Adjust the other wrench to fit the body of the Quick Disconnect.ย  Keep wrench close to the pipe nipple side of the Quick Disconnect, and tighten the Quick Disconnect.ย  If using yellow teflon tape, tighten two (2) full turns (orient the lever parallel to the ground).ย  If using LP gas thread sealant, tighten one (1) full turn (orient the level parallel to the ground).
  • (3) Perform LPG Test: Perform a three (3) minute LPG test at 8โ€ water column with a manometer.

 

Please read the dealer notification letter dated January 10, 2023, which accompany these instructions.  The dealer notification letter includes important information, including but not limited to, how to order a replacement Quick Disconnect from Holiday House RV, and what documents you need to submit to Holiday House RV to be reimbursed for the reasonable labor costs incurred by you in performing this recall.

Please note that if you inspect a Holiday House RV travel trailer in accordance with these instructions, and the travel trailer is not subject to this recall, Holiday House RV will pay a flat rate of 0.1 hours to cover your labor costs.

If you must remove and replace a Quick Disconnect in accordance with these instructions, then Holiday House RV will pay you a flat rate of 0.3 hours to cover your labor costs.

 

Sincerely,

Holiday House RV

 

Holiday House Recreational Vehicles โฌง 25771 Miner Road โฌง Elkhart, IN 46514 โฌง 574-206-0016

 


Chronology :

Holiday House, LLC received notification from NHTSA that a safety defect exists in certain (i) Mr. Heater 1/4 Quick Connector Sets with Shutoff Valve and Excess Flow Plug-Quick Disconnect (part number F276181) and (ii) Mr. Heater 1/4 Quick Connector Hose Assemblies (part numbers F271806 and 71806). The LP gas quick disconnect fittings may crack in components affected by the safety defect, thereby causing a gas leak which increases the risk of fire. It appears that in a report dated April 19, 2022, Enerco Group, Inc. notified NHTSA of the above-mentioned safety defect. Based on the foregoing, Holiday House, LLC decided to issue a recall with respect to the twenty-six (26) vehicles which may have been affected by the defect.

 


22E034 – Cracked LP Gas Quick Disconnect Fitting – Mr. Heater 1/4 Quick Connector Set

 

http://oemdtc.com/8524/22e034-cracked-lp-gas-quick-disconnect-fitting-mr-heater-1-4-quick-connector-set

 


6 Affected Products

Vehicles

MAKEMODELYEAR
HOLIDAY HOUSE18RB2021-2022
HOLIDAY HOUSE24TB2021-2022
HOLIDAY HOUSE27RQ2021-2022

 


7 Associated Documents

Recall Acknowledgement

RCAK-22V882-8635.pdf 645.789KB

 


Defect Notice 573 Report

RCLRPT-22V882-8775.PDF 216.892KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V882-8757.pdf 76.57KB

 


Remedy Instructions and TSB

RCRIT-22V882-6749.pdf 138.435KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V882-8429.pdf 136.927KB

 


Recall Quarterly Report #1, 2023-1

RCLQRT-22V882-0133.PDF 211.123KB

 


Recall Quarterly Report #2, 2023-2

RCLQRT-22V882-3545.PDF 211.223KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V882&docType=RCL

 


 

Bestseller No. 1
BILAL 6 Set Quick Connect Hose Fittings for Garden Hose Quick Connector with Gasket, 3/4 Inch GHT Male and Female Attachment Quick Release Water Hose Adapter
  • PACKAGE INCLUDING: Female quick connectors*6, male quick connectors*6, and extra garden hose rubber washers*6.
  • UNIVERSALLY COMPATIBLE: This aluminum garden hose quick connectors with 3/4" garden hose thread, fit for all standar garden hose.
  • PRECISION DESIGNED: With precision, stronger and lighter processes to ensure NO-Leak and durable performance.
  • QUICK & EASY: Easy to connect and disconnect, free your energy and time to maintain your yard, garden, plant, and etc.
  • WIDELY USES: can be used with all garden hoses, watering devices, jets, sprinklers, and nozzles, providing versatile connectivity.
Bestseller No. 2
FINEST+ Garden Hose Quick Connector, Solid Brass 3/4 Inch Thread Fitting No-Leak Water Hose Female and Male Easy Connect (6 Sets)
  • ใ€ Premium Brass Constructionใ€‘Made of high quality brass material. Durability & leak-free.
  • ใ€Widely Applicationใ€‘Standard 3/4" brass garden hose thread works great with any Garden hose thread sprayer, sprinklers, faucet, lances, nozzle and other irrigation accessories.
  • ใ€No Leakใ€‘Pruduce by precision process, easy on and off, pull back female connector and insert male connetor. The hose thread could connect hose tightly with no leak.
  • ใ€Can Stand Up to 200 PSIใ€‘Quick Connector stand up to 200 PSI, offer continuous water flow.
  • ใ€Package Includesใ€‘: 6 x brass male quick connectors, 6 x brass female swivel connectors, 6 x rubber self locking washers.
Bestseller No. 3
HQMPC Garden Hose Quick Connect Solid Brass Quick Connector Garden Hose Fitting Water Hose Connectors 3/4 inch GHT (2SETS)
  • โ˜…ใ€Standard 3/4 Inch GHT Garden Hose Quick Connectใ€‘-This garden hose quick connect sets including 2 brass female connectors + 2 brass male connectors+4 free washers.Use this hose quick connect fittings You can enjoy it work perfectly with any standard garden hose,faucets,hose bibs and watering devices.
  • โ˜…ใ€Durable And Solid Brass Construction Water Hoses Connectorใ€‘-The quick connect garden hose fittings Standard 3/4 inch GHT water hose quick connector fits all types of garden hoses. garden hose quick connect fittings most solid brass which means durability & leak-free. No cheap and flimsy aluminum or plastic material.Note: our thread is GHT, should connect with GHT female thread, if you connect with another thread possible leak
  • โ˜…ใ€Quick Connect Garden Hose Fittingsใ€‘-The water hose quick connect fittings Stand up to 200 PSI,gives the Easy Connect Fitting continuous water flow and itโ€™s a great tool to complete your garden accessories and water hose connect.Easy to connect and disconnect.
  • โ˜…ใ€Quick & Easy Connectorใ€‘- The quick connect hose fittings 1-Handed Operation.You can save much time using the quick connect sets install in spigot, hose end and nozzle. Easy Off-And-On adapter provides a tight, secure Fit, no-Leak connection.
  • โ˜…ใ€Water Hose Quick Connect with 3 Years Warrantyใ€‘The best brass garden quick connectors for your garden hose.buy this hose quick connect You can reply on our service of 3 years guarantee.
Bestseller No. 4
Hourleey Garden Hose Quick Connector, 3/4 Inch Male and Female Garden Hose Fitting Quick Connector, 6 Set
  • Package include: 6 female quick connectors and 6 male quick connectors, 6 extra garden hose rubber washers
  • Widely use: Standard 3/4" aluminum garden hose thread, fit for all 3/4" standard garden hose
  • Easy Connect: Easy to connect and disconnect, rubberized grips design makes quick connector more convenient for connect and disconnect
  • Material: Premium aluminum material makes it stronger and lighter, construction for prolonged service life
  • Good Service: If any problem, please feel free to contact us
SaleBestseller No. 5
Eden 93218 Premium Garden Hose Quick Connect Kit | 9-Piece / 3-Pair Snap & Lock Fittings and Adapters with Water Stop, Flow Control, Secure Twist-Lock Design
  • FLOW CONTROL / SHUTOFF VALVE- Quickly adjust water flow or shut off the water at the connector to swap tools without returning to the faucet.
  • SECURE AND RELIABLE LOCKING- The twist-and-lock mechanism prevents accidental disconnection, keeping your watering setup stable and dependable.
  • INCLUDES 3 CONNECTION SETS- Each set includes 1 female hose quick connector with a flow control / shutoff valve and 2 male product end adapters.
  • ERGONOMIC COMFORT-GRIP DESIGN- TPR soft-touch grip and ergonomic shape provide comfortable, non-slip handling during attachment and removal.
  • PREMIUM HEX GRIP ADAPTERS- Hexagonal grip design offers superior control and leverage, making installation and tool changes effortless.

Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...