December 2, 2022 NHTSA CAMPAIGN NUMBER: 22V891000
Insufficient Air Brake Supply Volume/FMVSS 121
The undersized air brake supply reservoir may provide an insufficient air supply to properly operate the brakes during repetitive braking, reducing braking performance and increasing the risk of a crash.
NHTSA Campaign Number: 22V891
Manufacturer Entegra Coach
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 392
Summary
Entegra Coach (Entegra) is recalling certain 2015-2019 Aspire and Insignia motorhomes. The service and supply reservoirs have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, “Air Brake Systems.”
Remedy
Dealers will replace the air reservoir, free of charge. Owner notification letters were mailed December 21, 2022. Owners may contact Entegra customer service at 1-800-283-8267.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
DATE:
11-3-22
APPLIES TO:
This Recall service bulletin applies to 2015 through 2019 MM and K2, motor home chassis built between February 12, 2014 and December 11, 2017.
NHTSA/TC Id:
22V-776
CONDITION:
Motor home chassis were manufactured with service brake supply reservoirs that do not meet the 12x combined volume as defined by FMVSS 121.
CORRECTION:
Install larger capacity air reservoir
Chronology :
Shyft Group
/Spartan RV
Chassis provided this chronology: On, or near, December 8, 2017, Engineering reviewed certain configurations of axles with certain brake chambers and performs capacity calculations on those axles. Engineering consults with Compliance on the preliminary findings.
December 12, 2017, Compliance completes review of the requirements in FMVSS 121 for air reservoir capacity and performs calculation to confirm Engineering’s findings. A VIN list identifying motor home chassis that could be affected by this condition and a stop ship was placed on further shipments until the condition was remedied. Information regarding the actual capacity of the brake chambers was sought.
On 12/13/17, the actual capacity of the service brake chambers was reviewed and it was determined the calculated amount of capacity was lower than the actual.
On December 15, 2017, Shyft determined a noncompliance to exist in the affected units. On Wednesday October 12, 2022 sent to notice to Shyft (formerly Spartan) its petition has been denied.
On October 19, 2021 engineering identified affected design codes from the previous recalled chassis were not made obsolete and began to investigated if those codes were used in other builds.
On October 21 a potential list of VIN’s was identified. The locations of the affected chassis were evaluated and on 11/10 reconciled the recall population needed to be expanded.
10 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| ENTEGRA | ASPIRE | 2015-2019 |
| ENTEGRA | INSIGNIA | 2015-2019 |
7 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-22V891-1322.PDF 215.703KB
Recall Acknowledgement
RCAK-22V891-9424.pdf 689.561KB
Recall 573 Report – 12/22/2022
RCLRPT-22V891-6942.PDF 215.698KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V891-5338.pdf 223.614KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V891-2428.pdf 164.496KB
Remedy Instructions and TSB
RCRIT-22V891-4863.pdf 638.849KB
Recall 573 Report – 3/29/2023
RCLRPT-22V891-8294.PDF 215.86KB
Latest Recalls Documents
- ใFEATURESใAutomatic Slack Adjuster Release Tool Wrench Set is designed to simplify installation and servicing of air brake systems in heavy-duty trucks, long-haul trucks, and trailers. This tool set makes brake service tasks easier and more efficient.
- ใEase of Useใ The fork-end release tool securely fits under the brake system's pull pawl, allowing hands-free operation for servicing your truck. The tool is designed to release the tensioner button and safely adjust the brakes without prying or causing damage.
- ใConvenient for Any Mechanic Tool SetใThe 5/16" double square ratcheting wrench with E-Z Grip handle adjusts the brake with ease. It features a side-mounted forward/reverse lever for simple operation.
- ใTime-Saving and Efficientใ The tools are made of durable carbon steel with oversized double injection handles that are comfortable to grip and use. Additionally, the double square offset reversible truck wrench provides reversible ratcheting action with an angled head for clearance.
- ใQuality AssuranceใWe are committed to providing high-quality products, and if you're not satisfied with our Automatic Slack Adjuster Release Tool Set, please feel free to contact us. We will do our best to address your concerns and solve any problems you may have.
- 3 TYPES OF BRASS FITTINGS: This set includes DOT push-to-connect fittings, compression nylon tube fittings, and brass pipe fittings. It can be used for maintenance work in various scenarios, such as air brake systems and pipelines, to meet most of your needs
- 200PCS DOT FITTINGS SET: 30Pcs DOT push-to-connect fittings:7pcs straight male connector,7pcs 90ยฐmale elbow,6pcs union connector,4pcs union tee,4pcs 45ยฐmale elbow,2pcs schrader valve;123Pcs DOT compression nylon tube fittings:7pcs straight male connector,7pcs 90ยฐmale elbow,6pcs union connector,4pcs union tee,4pcs 45ยฐmale elbow,95pcs sleeve ferrules;45Pcs Brass pipe fittings:6pcs hex coupling,6pcs hex nipple,6pcs hex bushing,6pcs extension adapter,3pcs 90ยฐ street elbow,6pcs hex plug,12pcs socket plug;1pc 4m teflon tape;1pc tube cutter
- PREMIUM MATERIAL: These fittings are made of high-quality CA360 brass and meet D.O.T FMVSS 571.106, Air Brake system Requirements, with corrosion resistance, high-temperature flexibility, and low permeability
- PRESSURE RANGE: Airline fittings have pressure resistance, making them less likely to trip. Air brake fittings working pressure from vacuum max to 300 PSI. Temperature Range: -40ยฐ F to +250ยฐ F(Note: see tubing manufacturerโs recommendations for pressure and temperature limitations)
- EASY TO INSTALL: Our 200pcs fitting kit is easy to use in air systems and pipe connections. You need to use tools to fix loose parts to handle in tight places so that they will be firmer and not easily fall off. Some pieces that contain a threaded end already have sealant pre-applied, and we send Teflon tape as a gift to provide a secure connection
- TYPE - Air Brake Chamber Type 3030 30/30 30 30
- REPLACEMENT - Bendix
165255 K049898 NT3030STD120 NT3030STD-120 802547 // Meritor
3030TN2-HNTRX-C // Dayton 3030C // Haldex
GC3030 GC3030P40 // Freightliner
3030TS // Mack
19QE441RP1 - SPECS - Brake Chamber Type: 3030 // Stroke: Standard // Stroke Length: 2-1/2" // Port Thread: 2x3/8" NPT // Bolt Thread: 5/8"-11 UNC // Push Rod Length: 11-3/4" // Weight: 21lbs
- FEATURES -
- WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
- SPECIFICATION & CERTIFICATION: Package including: 1 pc 15 FT red&blue 3-in-1 air lines kit, 2 pcs 16" tender spring kits, 1 pair glad hands, 1 pair gladhand handles, 1 pc gladhand holder, 4 pcs gladhand seals, Teflon tape. Certification: [SAE J2394 - 4/12-2/10-1/8, -65โ/-85โ for ABS Green Cable], [DOT SAE J1402A 3/8" ID Air Hose], [SAE J560 for Plug]
- BOTH ENDS SPRING JOINT: Both ends of air brake hoses and ABS cables are protected by stainless steel springs. The spring joint with good elasticity can protect the wires well, and have a cushioning role when installing and using a wire. Therefore, our semi truck trailer air hose line kits have reliable security and long service life
- ALUMINUM GLADHAND HANDLE: The CheeMuii air brake hoses are directly equipped with aluminum grips instead of rubber grips that are easily damaged and aged. We are committed to providing you with safer and more durable products
- AIR BRAKE LINES: The CheeMuii red and blue air lines' double-braided design consists of interwoven spirals and is manufactured using a 3-layer integrated molding process. The air line hose assembly has higher burst pressure and better resistance to twisting, with a safer and longer service life
- 7 WAY ELECTRICAL CABLE: The power lines use the industry standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck, which meets SAE J560 testing and performance requirements. Both ends of ABS cables are protected by stainless steel springs. The spring joint can not only protect the wires well, but also have a cushioning role when installing and using
Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-891 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Entegra Coach Submission Date : DEC 02, 2022 NHTSA Recall No. : 22V-891 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Entegra Coach Address : 903 South Main Street P.O. Box 460 Middlebury IN 46540 Company phone : 1-800-945-4787 Population : Number of potentially involved : 392 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2015-2019 Entegra Coach Aspire Class A, Insignia Class A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Shyft Group
/Spartan RV
Chassis provided a list of affected VINs to Entegra Coach. Motor home chassis affected by this recall are equipped with T24 brake chambers on the steer axle, T30 brake chambers on the drive axle, T16 brake chambers on the steer axle and a 500 cubic inch reservoir (wet tank). Vehicles not included in this recall are equipped with a 1000 cubic inch reservoir (wet tank). Production Dates : APR 29, 2014 – FEB 28, 2018 VIN Range 1 : Begin : 4VZAT1D90JC084703 End : 4VZBU1D9XHC081724 โ Not sequential Description of Noncompliance : Description of the Noncompliance : The combined volume of air in all service and supply reservoirs does not meet the 12X combined volume for all service brake chambers as defined in S5.1.2.1 of FMVSS 121 – Air brake Systems FMVSS 1 : 121 – Air brake systems FMVSS 2 : NR Description of the Safety Risk : In increased braking events, there may be inadequate air volume for the service brakes which may lead to other unintended consequences that could increase the risk of a crash. Description of the Cause : Pending per Shyft Group
/Spartan RV
Chassis. Identification of Any Warning that can Occur : A low air pressure tell tale may illuminate, in addition to an audible alarm, in the event air pressure falls below a certain threshold. Involved Components : Part 573 Safety Recall Report 22V-891 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Component Name 1 : Air Tank Component Description : Air Reservoir Component Part Number : NR Supplier Identification : Component Manufacturer Name : Shyft Group
/Spartan RV
Chassis Address : 1541 Reynolds Road Charlotte Michigan 48813 Country : United States Chronology : Shyft Group
/Spartan RV
Chassis provided this chronology: On, or near, December 8, 2017, Engineering reviewed certain configurations of axles with certain brake chambers and performs capacity calculations on those axles. Engineering consults with Compliance on the preliminary findings. December 12, 2017, Compliance completes review of the requirements in FMVSS 121 for air reservoir capacity and performs calculation to confirm Engineering’s findings. A VIN list identifying motor home chassis that could be affected by this condition and a stop ship was placed on further shipments until the condition was remedied. Information regarding the actual capacity of the brake chambers was sought. On 12/13/17, the actual capacity of the service brake chambers was reviewed and it was determined the calculated amount of capacity was lower than the actual. On December 15, 2017, Shyft determined a noncompliance to exist in the affected units. On Wednesday October 12, 2022 sent to notice to Shyft (formerly Spartan) its petition has been denied. On October 19, 2021 engineering identified affected design codes from the previous recalled chassis were not made obsolete and began to investigated if those codes were used in other builds. On October 21 a potential list of VIN’s was identified. The locations of the affected chassis were evaluated and on 11/10 reconciled the recall population needed to be expanded. Description of Remedy : Description of Remedy Program : Shyft will exchange one air reservoir with one with larger air capacity. Retail owners may contact Shyft at 800-543-4277 in order to request reimbursement for a pre-notification remedy. How Remedy Component Differs from Recalled Component : Vehicles affected by this condition would be equipped with a 500 cubic inch capacity air reservoir for the wet tank. A wet tank with 1000 cubic inches of air capacity would be installed in its place. Part 573 Safety Recall Report 22V-891 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Identify How/When Recall Condition was Corrected in Production : The recall condition was corrected in production on or after 10/20/2022. Recall Schedule : Description of Recall Schedule : Entegra Coach will send notifications to affected dealers and retail owners. Planned Dealer Notification Date : DEC 23, 2022 – DEC 23, 2022 Planned Owner Notification Date : DEC 23, 2022 – DEC 23, 2022 * NR – Not Reported
**************************************************************************************************************
IMPORTANT SAFETY RECALL This Notice Applies to Your Recreational Vehicle ยซunit_serial_ยป ยซNAMEยป ยซADDRESSยป ยซCITYยป, ยซSTยป ยซZIPยป Dear Valued Customer: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Entegra Coach and Spartan RV
Chassis, a brand of Shyft Group
, Inc., have determined that certain Model Year 2017โ2019 Insignia and 2015-2017 Aspire Class A motorhomes fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS No. 121), โAir Brake Systemsโ. The affected vehicles are built on certain 2015 to 2019 model year K2 and MM model Spartan RV
Chassis. The combined volume of air in the air brake system may be insufficient. In increased braking events, there may be inadequate air volume for the service brakes which may lead to other unintended consequences that could increase the risk of a crash. A low air pressure telltale may illuminate, in addition to an audible alarm, in the event air pressure falls below a certain threshold. Spartan RV
Chassis will replace one of the air reservoirs with a larger capacity reservoir. The repair is expected to up to 2 hours and will be performed at no charge. Due to scheduling times the service provider may need your vehicle for longer. Please contact your closest Spartan service center to schedule an appointment to have the remedy applied. For additional assistance, you may call Spartan RV
Chassis Customer Product and Support at 1-800-543-4277. Federal regulations require that any vehicle lessor receiving this notice must forward a copy of this notice to the lessee by first class mail within ten (10) days from receipt of this owner notification letter. If you paid to have this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. Submit an email to service@jayco
.com including your name, address, VIN, recall number, and a clear, legible receipt showing the identification of the product that was recalled. If, you take your recreational vehicle to a Spartan Service Center on the agreed service date and they do not remedy this condition at no charge, please contact our Customer Service Department at 800-517-9137. If after contacting a Spartan Service Center and Entegra Customer Service, you are not able to have the safety defect remedied without charge and/or within a reasonable time, you may wish to submit a written complaint to the Administrator, national Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153): or go to http://www.safercar.gov. We certainly regret this inconvenience; however, your safety is our most important priority. Sincerely, Entegra Coach Safety Recall: December 2022 Jayco
-NHTSA # 22V-891 Spartan/Shyft Group
-NHTSA # 22V-785 (22-14) Reason for this recall Recall Remedy What we need you to do
**************************************************************************************************************
IMPORTANT SAFETY RECALL ยซNameยป ยซAddressยป ยซCityยป, ยซStateยป ยซZIPยป Dear Valued Dealer: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Entegra Coach and Spartan RV
Chassis, a brand of Shyft Group
, Inc., have determined that certain Model Year 2017โ2019 Insignia and 2015-2017 Aspire Class A motorhomes fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS No. 121), โAir Brake Systemsโ. The affected vehicles are built on certain 2015 to 2019 model year K2 and MM model Spartan RV
Chassis. The combined volume of air in the air brake system may be insufficient. In increased braking events, there may be inadequate air volume for the service brakes which may lead to other unintended consequences that could increase the risk of a crash. A low air pressure telltale may illuminate, in addition to an audible alarm, in the event air pressure falls below a certain threshold. Spartan RV
Chassis will replace one of the air reservoirs with a larger capacity reservoir. The repair is expected to up to 2 hours and will be performed at no charge. Due to scheduling times the service provider may need your vehicle for longer. Please contact your closest Spartan service center to schedule an appointment to have the remedy applied. For additional assistance, you may call Spartan RV
Chassis Customer Product and Support at 1-800-543-4277. ยซSerial_numberยป Federal law requires the Recall Remedy be completed on this unit prior to customer delivery. Please confirm the unit serial number requires the Recall Remedy using Unit Management in Jayco
Partners. If you sold this unit recently, please contact the owner immediately to inform them of this recall. In addition, please register this unit through Jayco
Partners. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. Should you have any questions, please contact Spartan RV
Chassis Customer Product and Support at 1-800-543-4277. We certainly regret this inconvenience; however, our Customersโ safety is our most important priority. Sincerely, Compliance Management Entegra Coach Safety Recall: December 2022 Jayco
- NHTSA # 22V-891 Spartan/Shyft Group
-NHTSA # 22V-785 (22-14) Reason for this recall Recall Remedy What we need you to do
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-891 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Entegra Coach Submission Date : DEC 22, 2022 NHTSA Recall No. : 22V-891 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Entegra Coach Address : 903 South Main Street P.O. Box 460 Middlebury IN 46540 Company phone : 1-800-945-4787 Population : Number of potentially involved : 394 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2015-2019 Entegra Coach Aspire Class A, Insignia Class A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Shyft Group
/Spartan RV
Chassis provided a list of affected VINs to Entegra Coach. Motor home chassis affected by this recall are equipped with T24 brake chambers on the steer axle, T30 brake chambers on the drive axle, T16 brake chambers on the steer axle and a 500 cubic inch reservoir (wet tank). Vehicles not included in this recall are equipped with a 1000 cubic inch reservoir (wet tank). Production Dates : APR 29, 2014 – FEB 28, 2018 VIN Range 1 : Begin : 4VZAT1D90JC084703 End : 4VZBU1D9XHC081724 โ Not sequential Description of Noncompliance : Description of the Noncompliance : The combined volume of air in all service and supply reservoirs does not meet the 12X combined volume for all service brake chambers as defined in S5.1.2.1 of FMVSS 121 – Air brake Systems FMVSS 1 : 121 – Air brake systems FMVSS 2 : NR Description of the Safety Risk : In increased braking events, there may be inadequate air volume for the service brakes which may lead to other unintended consequences that could increase the risk of a crash. Description of the Cause : Pending per Shyft Group
/Spartan RV
Chassis. Identification of Any Warning that can Occur : A low air pressure tell tale may illuminate, in addition to an audible alarm, in the event air pressure falls below a certain threshold. Involved Components : Part 573 Safety Recall Report 22V-891 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Component Name 1 : Air Tank Component Description : Air Reservoir Component Part Number : NR Supplier Identification : Component Manufacturer Name : Shyft Group
/Spartan RV
Chassis Address : 1541 Reynolds Road Charlotte Michigan 48813 Country : United States Chronology : Shyft Group
/Spartan RV
Chassis provided this chronology: On, or near, December 8, 2017, Engineering reviewed certain configurations of axles with certain brake chambers and performs capacity calculations on those axles. Engineering consults with Compliance on the preliminary findings. December 12, 2017, Compliance completes review of the requirements in FMVSS 121 for air reservoir capacity and performs calculation to confirm Engineering’s findings. A VIN list identifying motor home chassis that could be affected by this condition and a stop ship was placed on further shipments until the condition was remedied. Information regarding the actual capacity of the brake chambers was sought. On 12/13/17, the actual capacity of the service brake chambers was reviewed and it was determined the calculated amount of capacity was lower than the actual. On December 15, 2017, Shyft determined a noncompliance to exist in the affected units. On Wednesday October 12, 2022 sent to notice to Shyft (formerly Spartan) its petition has been denied. On October 19, 2021 engineering identified affected design codes from the previous recalled chassis were not made obsolete and began to investigated if those codes were used in other builds. On October 21 a potential list of VIN’s was identified. The locations of the affected chassis were evaluated and on 11/10 reconciled the recall population needed to be expanded. Description of Remedy : Description of Remedy Program : Shyft will exchange one air reservoir with one with larger air capacity. Retail owners may contact Shyft at 800-543-4277 in order to request reimbursement for a pre-notification remedy. How Remedy Component Differs from Recalled Component : Vehicles affected by this condition would be equipped with a 500 cubic inch capacity air reservoir for the wet tank. A wet tank with 1000 cubic inches of air capacity would be installed in its place. Part 573 Safety Recall Report 22V-891 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Identify How/When Recall Condition was Corrected in Production : The recall condition was corrected in production on or after 10/20/2022. Recall Schedule : Description of Recall Schedule : Entegra Coach will send notifications to affected dealers and retail owners. Planned Dealer Notification Date : DEC 23, 2022 – DEC 23, 2022 Planned Owner Notification Date : DEC 23, 2022 – DEC 23, 2022 * NR – Not Reported
**************************************************************************************************************
Recall Service Bulletin RSB22-330-001 Page 1 of 5 QUA-FR-0291 v: 5.0 RSB22-330-001 Internal ID 22-14 Expires 11/2027 Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians are appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. DATE: 11-3-22 APPLIES TO: This Recall service bulletin applies to 2015 through 2019 MM and K2, motor home chassis built between February 12, 2014 and December 11, 2017. NHTSA/TC Id: 22V-776 CONDITION: Motor home chassis were manufactured with service brake supply reservoirs that do not meet the 12x combined volume as defined by FMVSS 121. CORRECTION: Install larger capacity air reservoir LABOR ALLOCATION: 3 hr CLASSIFICATION: E3 PARTS NEEDED: QTY Part Number Description 1 S- 2628-001 Kit-Service, Addl Air Tank Volume Kit # S-2628-001 Contains: QTY Part Number Description 2 4403-MM5-001 Support-Air Tank to Frame 4 0100-MM5-002 Support-Air Reservoir 1 0219-MM5 Air Tank 1200 Cu In 1 2035-MM5-031 Lanyard-Air Res Drain Valve 1 0716-MM5-J05 Bushing 8-4 1 3092-MM5-A07 Elbow 90ยฐ 6-8 1 3092-MM5-A02 Elbow 90ยฐ 4-4 2 3092-MM5-B12 Elbow 45ยฐ 10-8 2 06160650H8Y Bolt 3/8-16×6.50 Hex Gr8 Yel 2 0616FLN8Y Nut 3/8-16 Flg Lk Gr8 Yel 2 06FWSAE8Y Washer Flat 3/8 SAE Gr8 4 06160125FH8Y Bolt 3/8-16×1.25 Hex Gr8 Yel 4 08130150FH8Y Bolt 1/2-13×1.50 Flg Gr8 4 0813FLN8Y Nut 1/2-13 Flg Lk 1 4414-MM5 Plumbing Diagram 1 RSB22-330-001 Recall Instructions Recall Service Bulletin RSB22-330-001 Page 2 of 5 QUA-FR-0291 v: 5.0 RSB22-330-001 Internal ID 22-14 Expires 11/2027 Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians are appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. GENERAL INSTRUCTIONS: Thoroughly review entire service bulletin before starting work. If there are questions or concerns with steps defined in this service bulletin, contact Spartan RV
Chassis Customer & Product Support Group. All applicable industry safety standards must be followed when performing work identified in this procedure. STEP-BY-STEP INSTRUCTIONS: 1. Properly support chassis to gain access to work underneath. 2. Locate air tanks and drain all air from tanks. 3. Locate the wet tank located on cross member. Refer to Figure 1 Figure 1.0 4. Disconnect air lines from air tank. 5. Remove wet tank from the cross member. 6. Remove and retain the moisture ejector for re-use. Refer to Figure 2 Item 11 7. Disconnect lanyard from drain valve and discard lanyard. 8. Properly dispose of air tank. Recall Service Bulletin RSB22-330-001 Page 3 of 5 QUA-FR-0291 v: 5.0 RSB22-330-001 Internal ID 22-14 Expires 11/2027 Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians are appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. 9. Assemble the replacement wet tank using air tank 0219-MM5 (Item 2). Refer to Figure 2. 10. To install fittings and drain valve apply pipe sealer with Teflon or equivalent to pipe threads only and tighten 2-3 turns from finger tight. 11. Install 3092-MM5-B12 (Item 5) in the end ports of the air tank. Refer to Figure 2. 12. Install 3092-MM5-A07 (Item 10) in top port of the air tank. Refer to Figure 2. 13. Install 0716-MM5-J05 (Item 3) and 3092-MM5-A02 (Item 4) in remaining top port of the air tank. Refer to Figure 2. 14. Install Moisture Ejector (Item 11) retained in step 6 into bottom port of the air tank. The moisture ejector must be mounted with the manual drain oriented perpendicular to the frame rail. Refer to Figure 2. 15. Attach new lanyard 2035-MM5-031 to manual drain valve. 16. Install 0100-MM5-002 (Item 1) on the air tank using 06160650H8Y (Item 7), 06FWSAE8Y (Item 9) and 0616FLN8Y (Item 8). Refer to Figure 2. Figure 2.0 17. Drill 4 holes in the right frame rail between the last two cross members on the chassis. Refer to Figure 3 for location of the holes. Recall Service Bulletin RSB22-330-001 Page 4 of 5 QUA-FR-0291 v: 5.0 RSB22-330-001 Internal ID 22-14 Expires 11/2027 Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians are appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. Figure 3.0 18. Install 4403-MM5-001 (Item 1) on frame rail using 08130150FH8Y (Item 2) and 0813FLN8Y (Item 3). Refer to figure 4 Figure 4.0 Recall Service Bulletin RSB22-330-001 Page 5 of 5 QUA-FR-0291 v: 5.0 RSB22-330-001 Internal ID 22-14 Expires 11/2027 Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians are appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. 19. Install air tank assembly to mounting brackets on frame rail using 06160125FH8Y and then tighten the 06160650FH8Y. Refer to Figure 5. Figure 5.0 20. Connect 5/8โ black air line from air dryer port 21 to air tank. Refer to Figure 5. 21. Connect 1/4″ yellow air line from governor reservoir port to air tank. Refer to Figure 5 22. Connect 5/8โ black air line from air tank to primary air tank. Refer to Figure 5. 23. Connect 3/8โ black air line from shop air connection to air tanks Refer to Figure 5. 24. Route Drain Lanyard from moisture ejector to existing 0.63โ diameter hole forward of the last cross member. 25. Check installed air lines per plumbing diagram 4414-MM5. Fill air system and check for leaks, resolve any issues, tie wrap all loose airlines and cables to existing cable runs.
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-891 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Entegra Coach Submission Date : MAR 29, 2023 NHTSA Recall No. : 22V-891 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Entegra Coach Address : 903 South Main Street P.O. Box 460 Middlebury IN 46540 Company phone : 1-800-945-4787 Population : Number of potentially involved : 394 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2015-2019 Entegra Coach Aspire Class A, Insignia Class A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Shyft Group
/Spartan RV
Chassis provided a list of affected VINs to Entegra Coach. Motor home chassis affected by this recall are equipped with T24 brake chambers on the steer axle, T30 brake chambers on the drive axle, T16 brake chambers on the steer axle and a 500 cubic inch reservoir (wet tank). Vehicles not included in this recall are equipped with a 1000 cubic inch reservoir (wet tank). Production Dates : APR 29, 2014 – FEB 28, 2018 VIN Range 1 : Begin : 4VZAT1D90JC084703 End : 4VZBU1D9XHC081724 โ Not sequential Description of Noncompliance : Description of the Noncompliance : The combined volume of air in all service and supply reservoirs does not meet the 12X combined volume for all service brake chambers as defined in S5.1.2.1 of FMVSS 121 – Air brake Systems FMVSS 1 : 121 – Air brake systems FMVSS 2 : NR Description of the Safety Risk : In increased braking events, there may be inadequate air volume for the service brakes which may lead to other unintended consequences that could increase the risk of a crash. Description of the Cause : Pending per Shyft Group
/Spartan RV
Chassis. Identification of Any Warning that can Occur : A low air pressure tell tale may illuminate, in addition to an audible alarm, in the event air pressure falls below a certain threshold. Involved Components : Part 573 Safety Recall Report 22V-891 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Component Name 1 : Air Tank Component Description : Air Reservoir Component Part Number : NR Supplier Identification : Component Manufacturer Name : Shyft Group
/Spartan RV
Chassis Address : 1541 Reynolds Road Charlotte Michigan 48813 Country : United States Chronology : Shyft Group
/Spartan RV
Chassis provided this chronology: On, or near, December 8, 2017, Engineering reviewed certain configurations of axles with certain brake chambers and performs capacity calculations on those axles. Engineering consults with Compliance on the preliminary findings. December 12, 2017, Compliance completes review of the requirements in FMVSS 121 for air reservoir capacity and performs calculation to confirm Engineering’s findings. A VIN list identifying motor home chassis that could be affected by this condition and a stop ship was placed on further shipments until the condition was remedied. Information regarding the actual capacity of the brake chambers was sought. On 12/13/17, the actual capacity of the service brake chambers was reviewed and it was determined the calculated amount of capacity was lower than the actual. On December 15, 2017, Shyft determined a noncompliance to exist in the affected units. On Wednesday October 12, 2022 sent to notice to Shyft (formerly Spartan) its petition has been denied. On October 19, 2021 engineering identified affected design codes from the previous recalled chassis were not made obsolete and began to investigated if those codes were used in other builds. On October 21 a potential list of VIN’s was identified. The locations of the affected chassis were evaluated and on 11/10 reconciled the recall population needed to be expanded. Description of Remedy : Description of Remedy Program : Shyft will exchange one air reservoir with one with larger air capacity. Retail owners may contact Shyft at 800-543-4277 in order to request reimbursement for a pre-notification remedy. This is a pass through recall from Shyft/Spartan RV
Chassis. Their recall number is 22V-785 (21-14). Shyft will submit quarterly completion reports to NHTSA. How Remedy Component Differs Vehicles affected by this condition would be equipped with a 500 cubic Part 573 Safety Recall Report 22V-891 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 from Recalled Component : inch capacity air reservoir for the wet tank. A wet tank with 1000 cubic inches of air capacity would be installed in its place. Identify How/When Recall Condition was Corrected in Production : The recall condition was corrected in production on or after 10/20/2022. Recall Schedule : Description of Recall Schedule : Entegra Coach will send notifications to affected dealers and retail owners. Planned Dealer Notification Date : DEC 23, 2022 – DEC 23, 2022 Planned Owner Notification Date : DEC 23, 2022 – DEC 23, 2022 * NR – Not Reported
SEOCONTENT-END
This product presentation was made with AAWP plugin.





