December 2, 2022 NHTSA CAMPAIGN NUMBER: 22V890000
Separation of the steering wheel could result in the inability to steer, increasing the risk of a crash.
NHTSA Campaign Number: 22V890
Manufacturer Newmar
Corporation
Components STEERING
Potential Number of Units Affected 30
Summary
Newmar
Corporation (Newmar
) is recalling certain 2022-2023 Supreme Aire motorhomes. The cap screws under the steering wheel cover could loosen and cause the steering wheel to separate from the steering column.
Remedy
Dealers will install new steering wheel cap screws, free of charge. Owner notification letters were mailed on December 30, 2022. Owners may contact Newmar
’s customer service at 1-800-731-8300.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
REASON FOR THIS RECALL
Newmar
Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific motorhomes built with steering wheels supplied by Steering Creations, Inc.
On certain Class C Supreme Aire Motorhomes, the cap screws that attach the steering wheel may not have been properly tightened. As a result, the steering wheel could loosen or detach and cause a loss of steering control.
These motorhomes require immediate service. Continued use poses a potential safety hazard.
The Safety Risk
Separation of the steering wheel could result in the inability to steer, increasing the risk of a crash.
WHAT WE WILL DO
Newmar
Corporation will be conducting this recall in its entirety. All units will have the cap screws removed and then re-install the steering wheel cap screws with Loctite applied and the screws re-torqued down to 3.5 Ft/Lbs. as directed by the steering wheel supplier, Steering Creations, Inc. All repairs will be at no cost to customer.
The total estimated time for repairs will be given to the customer at the time they contact the service center for appointment.
WHAT YOU NEED TO DO
As this defect does affect motor vehicle safety, it is recommended that you call Newmar
service department immediately at 1-800-731-8300. An associate will assist you in making an appointment to have this repair completed.
Federal regulations require that any vehicle lessor receiving this recall notification must forward a copy of this notice to the lessee within ten days.
Chronology :
8/16/22 โ Newmar
received notice that a customer had an issue with the steering wheel coming loose. This was investigated and it was found that the cap screws under the steering wheel had worked loose. The steering wheel was fixed at the Newmar
Service Center when it was determined what the cause of the loose steering wheel was.
10/31/22 โ Newmar
production noticed several steering wheels felt loose, 6 units in production were found with loose steering wheels and were fixed prior to leaving production with instructions from the steering wheel supplier, Steering Creations, Inc.
11/28/22 โ The loose steering wheel issue was brought to the Safety Committee for review and it was decided to issue a recall for all units that have used the steering wheel supplied by Steering Creations, Inc.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| NEWMAR | SUPREME AIRE | 2022-2023 |
10 Associated Documents
Defect Notice 573 Report
RCLRPT-22V890-6589.PDF 213.668KB
Recall Acknowledgement
RCAK-22V890-8313.pdf 646.176KB
Recall 573 Report- 12/09/2022
RCLRPT-22V890-2937.PDF 213.747KB
Owner Notification Letter(Part 577)
RCONL-22V890-6076.pdf 202.008KB
Manufacturer Notices(to Dealers,etc)
Recall Quarterly Report #1, 2022-4
RCLQRT-22V890-6802.PDF 211.104KB
Recall Quarterly Report #1, 2022-4
RCLQRT-22V890-1692.PDF 211.101KB
12/02/2022 Defect and Noncompliance Information Report
RMISC-22V890-5808.pdf 216.595KB
Cover Letter
RMISC-22V890-0927.pdf 175.913KB
Recall Quarterly Report #2, 2023-1
RCLQRT-22V890-7949.PDF 211.2KB
Latest Recalls Documents
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER โ BUILT FOR DIESEL DIAGNOSTICS๏ผThe ANCEL X7HD PRO combines full-system diagnostics, bi-directional control, ECU coding, HDOBD/OBD2 functions, and 42+ reset services in one powerful heavy duty truck scanner. This diesel scan tool helps technicians, fleet owners, and repair shops diagnose problems faster, reduce downtime, and complete more repairs without switching between multiple truck diagnostic tools. Features a 10.1" Android tablet, Bluetooth & Wi-Fi, live data graphing, and 2 years of f-ree updates
- 42+ RESET FUNCTIONS โ MORE THAN A BASIC TRUCK CODE READER๏ผPerform essential service functions including forced DPF regeneration, injector coding, speed limiter adjustment, idle adjustment, oil reset, ABS reset, SRS reset, EPB reset, throttle reset, and suspension calibration. Designed for real truck maintenance and fleet service, this commercial truck diagnostic scanner helps reduce dealer visits, avoid unnecessary downtime, and handle more repair jobs with one diesel diagnostic tool
- ACTIVE TEST & ECU CODING โ ADVANCED BIDIRECTIONAL SCAN TOOL FOR TRUCKS๏ผQuickly locate faults by activating components and sending commands directly to vehicle systems. Test injectors, ABS, throttle, cooling systems, and other modules in real time without unnecessary disassembly. ECU coding and module matching help adapt replacement parts, restore factory settings, and reduce repeat repairs, making this semi truck scan tool ideal for advanced troubleshooting and daily shop work
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS โ WIDE TRUCK & ENGINE COVERAGE๏ผRead and clear codes, monitor live data, freeze frame, and diagnose engine, transmission, ABS, body, and other major systems. Compatible with Freightliner
, Kenworth
, Peterbilt
, Volvo
, Mack
, International
, and other commercial truck brands, plus Cummins
, Caterpillar
, Detroit, Paccar
, and Navistar
diesel engines. Also supports full OBD2/EOBD diagnostics for standard vehicles, making it a versatile truck obd2 scanner for mixed fleets and repair shops - PROFESSIONAL HARDWARE + RELIABLE SUPPORT โ BUILT FOR DAILY SHOP USE๏ผThis professional diesel diagnostic computer features a 10.1" touchscreen, Android 10.0 system, 6000mAh battery, Bluetooth/Wi-Fi connectivity, and built-in front & rear cameras for documenting repairs and remote troubleshooting. Includes 2 years of fr-ee updates, 1-year w-arranty, and responsive technical support. Contact [email protected] before purchase to confirm compatibility and supported functions for your truck or diesel engine
- ใBuilt for Heavy Duty Diesel DiagnosticsใDesigned for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisionsโsaving time, reducing downtime, and avoiding unnecessary shop visits
- ใFull System Diagnostics+All HD OBD ModesใThe New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehiclesโdigging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but whyโso you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- ใWide Heavy-Duty Vehicle CoverageใSupports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner
, Kenworth
, Peterbilt
, Volvo
, International
, Detroit, Cummins
, Paccar
, Allison, Eaton
, Bendix
, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed - ใSpeaks Major Truck ProtocolใThe New HD601 diesel truck scanner is built for American-made trucksโand supports the heavyโduty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765โ4, ISO 14230โ4, ISO 9141โ2, J1850 PWM/VPW, ISO 27145โ4, and EUROโ6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosingโno guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- ใSave Hundreds on Diagnostic FeesใWhy pay $150โ300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourselfโin minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- ใOne Tool, Total Fleet Coverage: 6/9/16 Pin ReadyใFeaturing an integrated 16-pin OBD2 connector and professional-grade 6-pin & 9-pin adapters, this heavy duty truck scanner provides extensive support for J1939, J1708, J1587, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 protocols. It offers reliable diagnostic coverage for major American diesel brandsโincluding Cummins
, Paccar
, Caterpillar
, Detroit, and Freightliner
โmaking it a versatile semi truck scanner for managing any diverse fleet. - ใ2 in 1 Diesel Code Reader & Advanced HD OBDIIใEquipped with professional-grade diesel scanner capabilities, the HD301 features intuitive Read/Erase codes and turn off the "Check Engine" light. With the built-in DTC Lookup library, you can instantly access fault code definitions on-device without searching the internet. It also retrieves hundreds of essential live sensor dataโsuch as coolant temperature, fuel pressure, and engine RPMโin a stable text format for precise and rapid troubleshooting. (Please note that the HD301 can not support DPF Regen.)
- ใFull System Truck DiagnosticใThe FOXWELL HD301 heavy duty scan tool is engineered to deeply access and scan all available electronic control modules specifically for truck, including Engine, Transmission, ABS, SRS, Chassis, and Body Control. This professional truck scanner diagnostic tool allows you to identify issues across the entire vehicle, ensuring your rig stays in peak condition for the long haul.
- ใVersatile for most big Rigs: Commercial, Passenger & BeyondใEngineered for more than just trucks, this heavy duty scan tool offers extensive coverage for pickups, buses, trailers, and even marine vessels. From construction machinery (excavators, loaders) to agricultural equipment (tractors, harvesters), it provides a true all-in-one diagnostic solution.
- ใPlug-and-Play & No SubscriptionใDesigned for the road! No WiFi, no batteries, and no complex App setup required. Simply plug it into your vehicleโs diagnostic port to start scanning immediately. Enjoy lifetime free software updates to keep your HD301 diesel truck scanner current with the latest vehicle models and featuresโwithout any hidden subscription feesโWhile overcoming language barriers with support for Spanish and English.
- ๐ฅ๐ฅ๐ฅ2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .โ >Full HDOBD/OBD2 Function โ >ALL System Diagnostic โ >42+ Reset Function โ >Active Test / Bi-Directional Controlโ >ECU Codingโ >Graphing Live Dataโ >Wide Compatibility โ >2 Yrs Free Updateโ >Remote Operationโ >Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: โ >6000 mAhโ >10.1 inch Tabletโ >2G RAMโ >32G ROM (Expandable to 128GB)โ >Data Record & Replay & Printโ >Android 10.0โ >Bluetooth 5.0 & Wifiโ >14 Languages
- ๐OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
- ๐Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
- ๐42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
- ๐10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc
- Diagnose Heavy-Duty Truck Problems Fast โ Read and clear fault codes and diagnose warning light issues on many Class 4โ8 diesel trucks including Freightliner
, Peterbilt
, Kenworth
, Volvo
, Mack
and Cummins
-powered vehicles - Help Reduce Downtime & Repair Costs โ It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Quickly check engine faults, view live truck data and identify issues before expensive repair shop visits or unnecessary repairs
- No complicated setup required โ Simple menus and built-in DTC explanations make this truck code reader easy to use for owner-operators, mobile mechanics and small fleet maintenance
- Live Data & Built-in DTC Lookup โ View real-time engine data and built-in truck fault code definitions directly on the scanner to help understand vehicle problems faster without searching through manuals
- Free Lifetime Updates & Technical Support โ Includes free software updates plus responsive technical support for setup, compatibility and everyday truck diagnostics
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-890 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Newmar
Corporation Submission Date : DEC 02, 2022 NHTSA Recall No. : 22V-890 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Newmar
Corporation Address : 355 North Delaware Street PO Box 30 Nappanee IN 46550 Company phone : 574-773-7791 Population : Number of potentially involved : 30 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2023 Newmar
Supreme Aire Class C Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar
Supreme Aire Class C motorhomes, the cap screws under the steering wheel cover could work loose. The loose screws could cause the steering wheel to come loose from the steering wheel adaptor, which could then separate from the steering column. The loose steering wheel could cause the inability to steer the unit which could increase the risk of a crash. 2022 SACC = 26 2023 SACC = 4 Production Dates : MAR 03, 2021 – SEP 07, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : On certain Newmar
Supreme Aire Class C motorhomes, the cap screws under the steering wheel cover could work loose. The loose screws could cause the steering wheel to come loose from the steering wheel adaptor, which could then separate from the steering column. The loose steering wheel could cause the inability to steer the unit which could increase the risk of a crash. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Loose steering wheel could cause the inability to steer the unit which could increase the risk of a crash. Description of the Cause : The cap screws under the steering wheel cover could work loose. The loose screws could cause the steering wheel to come loose from the steering wheel adaptor, which could then separate from the steering column. Part 573 Safety Recall Report 22V-890 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Identification of Any Warning that can Occur : Feel the steering wheel becoming loose during use. Involved Components : Component Name 1 : Steering Wheel Component Description : Steering Wheel Component Part Number : NR Supplier Identification : Component Manufacturer Name : Steering Creations, Inc Address : 519 SW 31st Ave Ocala Florida 34474 Country : United States Chronology : 8/16/22 โ Newmar
received notice that a customer had an issue with the steering wheel coming loose. This was investigated and it was found that the cap screws under the steering wheel had worked loose. The steering wheel was fixed at the Newmar
Service Center when it was determined what the cause of the loose steering wheel was. 10/31/22 โ Newmar
production noticed several steering wheels felt loose, 6 units in production were found with loose steering wheels and were fixed prior to leaving production with instructions from the steering wheel supplier, Steering Creations, Inc. 11/28/22 โ The loose steering wheel issue was brought to the Safety Committee for review and it was decided to issue a recall for all units that have used the steering wheel supplied by Steering Creations, Inc. Description of Remedy : Description of Remedy Program : All units will have the cap screws removed and then re-install the steering wheel cap screws with Loctite applied and the screws re-torqued down to 3.5 Ft/Lbs. as directed by the steering wheel supplier, Steering Creations, Inc. All repairs will be at no cost to customer. Part 573 Safety Recall Report 22V-890 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : The cap screws removed and then re-install the steering wheel cap screws with Loctite applied and the screws re-torqued down to 3.5 Ft/Lbs. as directed by the steering wheel supplier, Steering Creations, Inc. Recall Schedule : Description of Recall Schedule : Customer and Dealer notification will be sent out on or before 60 days from the date of this filing, 1/31/2023. Planned Dealer Notification Date : JAN 31, 2023 – JAN 31, 2023 Planned Owner Notification Date : JAN 31, 2023 – JAN 31, 2023 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-890 The information contained in this report was submitted pursuant to 49 CFR ยง573 Manufacturer Name : Newmar
Corporation Submission Date : DEC 09, 2022 NHTSA Recall No. : 22V-890 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Newmar
Corporation Address : 355 North Delaware Street PO Box 30 Nappanee IN 46550 Company phone : 574-773-7791 Population : Number of potentially involved : 30 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2023 Newmar
Supreme Aire Class C Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar
Supreme Aire Class C motorhomes, the cap screws under the steering wheel cover could work loose. The loose screws could cause the steering wheel to come loose from the steering wheel adaptor, which could then separate from the steering column. The loose steering wheel could cause the inability to steer the unit which could increase the risk of a crash. 2022 SACC = 26 2023 SACC = 4 Production Dates : MAR 03, 2021 – SEP 07, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : On certain Newmar
Supreme Aire Class C motorhomes, the cap screws under the steering wheel cover could work loose. The loose screws could cause the steering wheel to come loose from the steering wheel adaptor, which could then separate from the steering column. The loose steering wheel could cause the inability to steer the unit which could increase the risk of a crash. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Loose steering wheel could cause the inability to steer the unit which could increase the risk of a crash. Description of the Cause : The cap screws under the steering wheel cover could work loose. The loose screws could cause the steering wheel to come loose from the steering wheel adaptor, which could then separate from the steering column. Part 573 Safety Recall Report 22V-890 Page 2 The information contained in this report was submitted pursuant to 49 CFR ยง573 Identification of Any Warning that can Occur : Feel the steering wheel becoming loose during use. Involved Components : Component Name 1 : Steering Wheel Component Description : Steering Wheel Component Part Number : NR Supplier Identification : Component Manufacturer Name : Steering Creations, Inc Address : 519 SW 31st Ave Ocala Florida 34474 Country : United States Chronology : 8/16/22 โ Newmar
received notice that a customer had an issue with the steering wheel coming loose. This was investigated and it was found that the cap screws under the steering wheel had worked loose. The steering wheel was fixed at the Newmar
Service Center when it was determined what the cause of the loose steering wheel was. 10/31/22 โ Newmar
production noticed several steering wheels felt loose, 6 units in production were found with loose steering wheels and were fixed prior to leaving production with instructions from the steering wheel supplier, Steering Creations, Inc. 11/28/22 โ The loose steering wheel issue was brought to the Safety Committee for review and it was decided to issue a recall for all units that have used the steering wheel supplied by Steering Creations, Inc. Part 573 Safety Recall Report 22V-890 Page 3 The information contained in this report was submitted pursuant to 49 CFR ยง573 Description of Remedy : Description of Remedy Program : All units will have the cap screws removed and then re-install the steering wheel cap screws with Loctite applied and the screws re-torqued down to 3.5 Ft/Lbs. as directed by the steering wheel supplier, Steering Creations, Inc. All repairs will be at no cost to customer. If the customer has had the repairs performed prior to receiving the recall notification letter the customer may be eligible to receive reimbursement for the total cost of obtaining a pre-notification remedy. The customer should contact the Newmar
Service Department for details on reimbursement. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : The cap screws removed and then re-install the steering wheel cap screws with Loctite applied and the screws re-torqued down to 3.5 Ft/Lbs. as directed by the steering wheel supplier, Steering Creations, Inc. Recall Schedule : Description of Recall Schedule : Customer and Dealer notification will be sent out on or before 60 days from the date of this filing, 1/31/2023. Planned Dealer Notification Date : JAN 31, 2023 – JAN 31, 2023 Planned Owner Notification Date : JAN 31, 2023 – JAN 31, 2023 * NR – Not Reported
**************************************************************************************************************
NEWMAR
CORPORATION NEWMARCORP.COM NEWMAR
CORPORATION ยท 355 N DELAWARE ST ยท NAPPANEE, IN 46550-0030 (574) 773-7791 ยท FAX (574) 773-5153 ยท WWW.NEWMARCORP.COM Page 1 of 2 12/02/2022 Defect and Noncompliance Information Report Newmar
Corporation was made aware of a potential equipment defect relating to motor vehicle safety that may exist in the vehicles listed below. Newmar
Corporation is furnishing notification to the National Highway Traffic Safety Administration pursuant to 49 U.S.C. Chapter 301 and 49 CFR Part 573.6. Newmar
Corporationโs campaign identification number will be assigned by NHTSA. Final Stage Vehicle Manufacturer Newmar
Corporation 355 N Delaware St. Nappanee, IN 46550-0030 Inquiries should be directed to: Rodney Newcomer Newmar
Corporation 355 N. Delaware St. Nappanee, IN 46550-0030 Phone: (574) 773-7791 Fax: (574) 773-2007 Identification of Vehicles The vehicle models involved in this recall are: 2022-2023 Supreme Aire Class C motorhomes. These vehicles were manufactured by Newmar
Corporation between 03/03/2021 and 09/07/2022. Comprehensive Vehicle Population The total number of vehicles included in this campaign is 30. Effected Population Assessment 100% of the vehicles identified above may contain defective equipment. Defect Description On certain Newmar
Supreme Aire Class C motorhomes, the cap screws under the steering wheel cover could work loose. The loose screws could cause the steering wheel to come loose from the steering wheel adaptor, which could then separate from the steering column. The loose steering wheel could cause the inability to steer the unit which could increase the risk of a crash. Page 2 of 2 Manufacturer: Newmar
Corporation 355 N. Delaware St. Nappanee, IN 46550 Ph. 574-773-7791 Principle Event Chronology 8/16/22 โ Newmar
received notice that a customer had an issue with the steering wheel coming loose. This was investigated and it was found that the cap screws under the steering wheel had worked loose. The steering wheel was fixed at the Newmar
Service Center when it was determined what the cause of the loose steering wheel was. 10/31/22 โ Newmar
production noticed several steering wheels felt loose, 6 units in production were found with loose steering wheels and were fixed prior to leaving production with instructions from the steering wheel supplier, Steering Creations, Inc. 11/28/22 โ The loose steering wheel issue was brought to the Safety Committee for review and it was decided to issue a recall for all units that have used the steering wheel supplied by Steering Creations, Inc. Newmar
Corporation is not aware of any injury, or death, in vehicles manufactured by Newmar
Corporation, attributed directly or indirectly to this defect. At the time of this letter Newmar
Corporation has received one warranty claims for this recall. Defect Remedy Program Newmar
Corporation will be conducting this recall in its entirety. All units will have the cap screws removed and then re-install the steering wheel cap screws with Loctite applied and the screws re-torqued down to 3.5 Ft/Lbs. as directed by the steering wheel supplier, Steering Creations, Inc. All repairs will be at no cost to customer. If the customer has had the repair performed before receiving this letter, they may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy. For additional information, contact Newmar
Corporation at: Service Department Newmar
Corporation 355 N Delaware St Nappanee, IN 46550-0030 Distributed Notices and Other Communications Customer notification will be sent out on or before 60 days from the date of this filing, 1/31/2023. This report prepared by: Rodney Newcomer Codes and Compliance Manager Newmar
Corporation
**************************************************************************************************************
NEWMAR
CORPORATION NEWMARCORP.COM NEWMAR
CORPORATION ยท 355 N DELAWARE ST ยท NAPPANEE, IN 46550-0030 (574) 773-7791 ยท FAX (574) 773-5153 ยท WWW.NEWMARCORP.COM Page 1 of 1 12/02/2022 VIA E-MAIL RECEIPT CONFIRMATION REQUESTED Mr. Greg Rea Associate Administrator for Enforcement NHTSA NEF-200, Room W45-306 1200 New Jersey Avenue, SE Washington, DC 20590 Re: Newmar
Corporation Part 573 Defect and Noncompliance Information Report Mr. Rea: Following is a compulsory โdefect and noncompliance information reportโ pursuant to 49 U.S.C. Chapter 301 and 49 CFR Part 573.6. Newmar
Corporation is reporting this recall campaign concerning specific Steering Wheels installed in 2022-2023 Newmar
Supreme Aire Class C motorhomes. Newmar
Corp. will assume responsibility for coordinating and executing this recall, in its entirety. If you need any additional information regarding this recall campaign, please feel free to contact me at (574) 773-7791, Ext. 3443. Sincerely, Rodney Newcomer Codes and Compliance Manager Newmar
Corporation [email protected]
**************************************************************************************************************
NEWMAR
CORPORATION . NEWMARCORP.COM NEWMAR
CORPORATION ยท 355 N DELAWARE ST ยท NAPPANEE, IN 46550-0030 (800) 731-8300 ยท WWW.NEWMARCORP.COM P A Page 1 of 2 IMPORTANT SAFETY RECALL This notice applies to your vehicle VIN. #_______________________ Name Address City, State Zip code Date: 12/28/2022 Motor Vehicle Recall Notification – Recall Campaign No. 22V-890 Dear Valued Customer: This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. REASON FOR THIS RECALL Newmar
Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific motorhomes built with steering wheels supplied by Steering Creations, Inc. On certain Class C Supreme Aire Motorhomes, the cap screws that attach the steering wheel may not have been properly tightened. As a result, the steering wheel could loosen or detach and cause a loss of steering control. These motorhomes require immediate service. Continued use poses a potential safety hazard. The Safety Risk Separation of the steering wheel could result in the inability to steer, increasing the risk of a crash. WHAT WE WILL DO Newmar
Corporation will be conducting this recall in its entirety. All units will have the cap screws removed and then re-install the steering wheel cap screws with Loctite applied and the screws re-torqued down to 3.5 Ft/Lbs. as directed by the steering wheel supplier, Steering Creations, Inc. All repairs will be at no cost to customer. The total estimated time for repairs will be given to the customer at the time they contact the service center for appointment. WHAT YOU NEED TO DO As this defect does affect motor vehicle safety, it is recommended that you call Newmar
service department immediately at 1-800-731-8300. An associate will assist you in making an appointment to have this repair completed. Federal regulations require that any vehicle lessor receiving this recall notification must forward a copy of this notice to the lessee within ten days. If you have had the repair performed before receiving this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy. For additional information, contact Newmar
Corporation at: Service Department Newmar
Corporation 355 N Delaware St Nappanee, IN 46550-0030 NEWMAR
CORPORATION ยท 355 N DELAWARE ST ยท NAPPANEE, IN 46550-0030 (574) 773-7791 ยท Fax (574)773-5153 ยท WWW.NEWMARCORP.COM P A Page 2 of 2 Newmar
dealers are best equipped to obtain parts and provide service to ensure your vehicle is corrected as promptly as possible. HOWEVER, if you take your vehicle to your dealer on the scheduled date and this condition is not remedied on that date or within five days; please contact the Newmar
Corporation Customer Service Department at 1-800-731-8300. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE., Washington DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. If you no longer own this vehicle, please furnish us the complete name and address of the person or dealership you sold or traded your vehicle to. Thank you for your cooperation. Your safety and satisfaction with your Newmar
product is important to us and we regret any inconvenience to you. Sincerely, Newmar
Corporation
**************************************************************************************************************
NEWMAR
CORPORATION . NEWMARCORP.COM NEWMAR
CORPORATION ยท 355 N DELAWARE ST ยท NAPPANEE, IN 46550-0030 Newmar
Service Department 1-866-290-5371 ยท WWW.NEWMARCORP.COM P A Page 1 of 1 Date: 12/28/2022 Re: Newmar
Corporation โ Motor Vehicle Recall Notification Subject:Recall Campaign No.: 22V-890 This notice is sent to you as a Newmar
Dealer in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Newmar
Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific Newmar
recreational vehicles. The National Traffic and Motor Vehicle Safety Act requires that each vehicle, which is subject to a recall campaign of this type, must be satisfactorily repaired within a reasonable time after the owner has tendered it for repair. A failure to adequately repair within 60 days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. To avoid providing these problematic solutions, every effort must be made to promptly schedule an appointment with each owner and to repair their vehicle as soon as possible. Vehicle owners are being notified of this recall. If the condition is not remedied within a reasonable time, they are instructed on how to contact the National Highway Traffic Safety Administration. REASON FOR THIS RECALL Newmar
Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific motorhomes built with steering wheels supplied by Steering Creations, Inc. On certain Class C Supreme Aire Motorhomes, the cap screws that attach the steering wheel may not have been properly tightened. As a result, the steering wheel could loosen or detach and cause a loss of steering control. Motorhomes included in this recall include: 2022-2023 Class C Supreme Aire Motorhomes These motorhomes require immediate service. Continued use poses a potential safety hazard. DEALER CAMPAIGN RESPONSIBILITY Dealers are to provide to all customers/owner vehicles the service of completing this campaign at no charge to the customer/owner regardless of vehicle age, vehicle mileage, or ownership at the time of repair. REPAIR PROCEDURE Newmar Corp. will provide the work instructions. If you should have any questions please contact your service account manager direct or the Newmar service department at: 1-866-290-5371. Thank you for your cooperation. Sincerely, Newmar Corporation
SEOCONTENT-END
This product presentation was made with AAWP plugin.





