February 10, 2023 NHTSA CAMPAIGN NUMBER: 23V075000
Incompatible Steering System Draglink
A damaged steering system can result in a loss of vehicle handling and control, increasing the risk of a crash.
NHTSA Campaign Number: 23V075
Manufacturer Gillig
, LLC
Components STEERING
Potential Number of Units Affected 1,334
Summary
Gillig
, LLC (Gillig
) is recalling certain 2022-2023 Low Floor transit and shuttle buses. Incompatible steering system draglink parts may have been installed during the vehicle assembly process, potentially resulting in long-term damage of the steering system.
Remedy
Gillig
will inspect and, when necessary, replace and tighten the draglink rod, free of charge. Owner notification letters were mailed March 29, 2023. Owners may contact Gillig
customer service at 1-510-264-5073 or 1-800-735-1500.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
What The Issue Is:
GILLIG
has determined that incorrect draglink parts may have been installed during the vehicle assembly process. The affected part numbers are #05-35402-000 and #05-35402-004. An incorrect draglink match may potentially result in long-term damage of the steering system, affect vehicle controllability and increase the risk of a crash.
As a result of the above, GILLIG
has decided to voluntarily initiate a safety recall campaign for the vehicle population that may be affected by the issue.
What We Are Asking You To Do:
1. We are asking you to follow a procedure to inspect and, when necessary, replace and/or re-torque all the affected parts.
2. After the completion of the procedure, return the VIN sheet stating that the recall service has been completed.
What GILLIG
Will Do For You:
1. GILLIG
will provide a procedure with clear instructions on how to perform the inspection and, when necessary, the replacement and/or re-torque of all affected parts to the manufacturer specifications
2. When needed, GILLIG
will supply all necessary replacement parts.
3. GILLIG
will pay a reasonable warranty claim for performing this function. GILLIG
estimates a maximum time of 30 min. per vehicle required to perform this function.
Any questions regarding the information should be directed to GILLIG
Service at field-service@GILLIG
.com .
If after having attempted to take advantage of this recall you believe you have not been able to have your bus remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
Federal regulations require that any vehicle lessor receiving the recall notice must forward a copy of this notice to the vehicle lessee within ten days.
Chronology :
01/19/2023 – First report of a wrong draglink potentially installed on a limited population of battery-electric and hybrid
buses.
01/20/2023 – Factory stop-ship implementation. The suspect bus configurations are held at the factory for inspection.
01/27/2023 – Initiate production data review to confirm size of the impacted vehicle population.
02/01/2023 – GILLIG
Field Service initiates full audit of battery electric buses in the field.
02/02/2023 – Production data analysis suggests the defect may involve a larger population of buses than previously identified. A pool of different powertrain configurations may be affected and have incorrect draglinks installed and/or clamp bolts torqued per incorrect specifications.
02/03/2023 – The GILLIG
Safety Committee decides to file a safety recall with NHTSA.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| GILLIG | LOW FLOOR | 2022-2023 |
8 Associated Documents
Defect Notice 573 Report
RCLRPT-23V075-8940.PDF 215.825KB
Recall Acknowledgement
RCAK-23V075-2486.pdf 645.205KB
Recall 573 Report – March 31, 2023
RCLRPT-23V075-7778.PDF 215.825KB
Recall Quarterly Report #1, 2023-1
RCLQRT-23V075-9564.PDF 211.117KB
ISSUED Owner Notification Letter(Part 577)
RCONL-23V075-9914.pdf 19.425KB
Recall Quarterly Report #2, 2023-2
RCLQRT-23V075-4384.PDF 211.222KB
Recall Quarterly Report #3, 2023-3
RCLQRT-23V075-0431.PDF 211.444KB
Recall Quarterly Report #4, 2023-4
RCLQRT-23V075-7296.PDF 211.554KB
Latest Recalls Documents
- COMPATIBILITY — Fits 2003-2008 Dodge
Ram
2500; 2003-2008 Dodge
Ram
3500; 2006-2008 Dodge
Ram
1500. - Vehicle-Specific Steering Upgrade: This MOOG
Front/Rear Suspension Stabilizer Bar Link is engineered for a precise fit and reliable performance on Ram
2500 and Ram
3500 trucks delivering restored stability - Heat Treated Ball Stud: This easy-install steering link is engineered with a heat-treated ball stud design, providing improved strength and a tight bearing structure for connections
- Impact Absorbing Link: The durable steering connector features an impact-absorbing link and a pressed cover plate seal to keep out debris, extending the life of your suspension system
- Pressed Cover Plate Seal: This Stabilizer Bar Link stands out with its superior pressed cover plate seal and robust ball stud design that help minimize looseness and wear
- COMPATIBILITY – Fits 2011-2016 Ford
F-250 Super Duty; 2011-2016 Ford
F-350 Super Duty - Vehicle-Specific Steering Upgrade: This MOOG
Front/Rear Suspension Stabilizer Bar Link is engineered for a precise fit and reliable performance on Ram
2500 and Ram
3500 trucks delivering restored stability - Heat Treated Ball Stud: This easy-install steering link is engineered with a heat-treated ball stud design, providing improved strength and a tight bearing structure for connections
- Impact Absorbing Link: The durable steering connector features an impact-absorbing link and a pressed cover plate seal to keep out debris, extending the life of your suspension system
- Pressed Cover Plate Seal: This Stabilizer Bar Link stands out with its superior pressed cover plate seal and robust ball stud design that help minimize looseness and wear
- COMPATIBILITY – Fits 2018-2018 Jeep
Wrangler JK; 2007-2017 Jeep
Wrangler - Reliable Steering Performance: Designed as a critical steering system component, the DRiV tie rods help support accurate wheel movement and consistent steering response for stable vehicle handling
- Protected for Long Service Life: Engineered with protective features to help guard against road debris, moisture, and contaminants, promoting smooth steering operation and dependable performance over time
- Restores Steering Control: Built to help return steering feel and handling characteristics closer to original equipment standards, supporting driver confidence and everyday driving reliability
- About DRiV: We are driven to deliver the automotive products and services our global customers want
- 【Upgraded Humanized Design】The tie rod end of this riding lawn mower part is adjustable, allowing users to easily adjust the toe-in of the front tires. This feature helps reduce tire wear and tear, extending tire life and enhancing overall mower performance.
- 【Excellent Performance】Long life-span matters, that is why our lawnmower/ yardtractor parts are made from durable high-quality iron material, ensures on-course operation, preventing deviation. It adapts to uneven terrains like slopes and potholes, maintaining stability.
- 【Cost Saving】This lawnmower part can be easily installed without the need for special tools or professional skills, allowing users to set it up on their own. Compared to the cost of OEM parts, it can save you at least $500.
- 【Fit for】Husqvarna 2754GLS, CT 126, CTH 174, LGT 2654, LT 154, LT 2223A2, LTH 154, LTH 18538, YTH22V46XLS, YTH2348, YTH23K46, YTH23K48, YTH23V42, YTH23V42LS, YTH23V48, YTH2448T, YTH2454, YTH2454T, YTH2454TSC, YTH24K48, YTH24K54, YTH24V42LS, YTH24V48; Poulan PB175A42LT, PB175A46, PB18VA46, PB195H42LT, PB20A42LT, PB10538LT, PB145G42, PB15542LT, PB185A42, PO10530LT, PO10538LT, PO12530LT, PO14538LT, PO15542LT, PO175A42LT
- 【Fit for】Jonsered LT2213 A, LT2213 C, LT2213 CA, LT2216 A2, LT2217 A, LT2218 A, LT2218 A2, LT2223 A2, LT2316 CM, LT2317 CMA, LT2320 CMA2, 2754GTHI, LT2317 CMA, LT2320 A2, YT46.【Replace OE Number】532194740, 532194741, 194740, 194741.
- [Vehicle Fitment]: Compatible with Ford
F-250 Super Duty 2005-2010 (4WD Only), Fit For F-350 Super Duty 2005-2010 (4WD Only; Except the Models with Wide Track Axle) --- Without Extended Axle Models - [Specification]: Installation Position: Front Suspension Left and Right Side; Materials: Alloy Steel; Package Details: 4Pcs Suspension Part - 2 x Front Upper Ball Joint (# K80026), 2 x Front Lower Ball Joint (# K8607); 5Pcs Steering Part - 1 x Front At Pitman Arm Drag Link (# DS80749), 1 x Front Left Outer Tie Rod End (# ES80754), 2 x Front Right Outer Tie Rod End (# DS300008 & ES80755), 1 x Front Right Outer Tie Rod End Adjusting Sleeve (# ES3420S); Included Components: ① Greased Fitting ② Castle Nut ③ Cotter Pin ④ Circlip
- [Direct Fitment]: Each part included is pre-lubricated and some parts of the kit are equipped with grease/zerk fitting (upper ball joint and right tie rod end with ball joint), which is convenient for later maintenance. The size of the parts are same with the original's, which ensures all components are "aligned smoothly" and "fixed tightly" during installation. Considering that your old sleeve is badly worn, so that equipped with a better sleeve suit for your right outer tie rod end
- [Convenient Maintenance]: All-in-one front suspension kit includes upper lower ball joints, drag link, tie rod ends and adjusting sleeves for complete front-end steering restoration. Made of high-strength forged steel with electrophoretic anti-rust coating, effectively resisting deformation, rust, mud and road salt corrosion. Every component passes tension and salt spray aging to meet safety standards for sturdy reliability. One-stop full front-end rebuild solution avoids repeated disassembly and multiple purchases, greatly reducing overall vehicle maintenance cost.
- [Buy with Confidence]: This suspension kit is engineered to address common vehicle performance issues, including: ① front end clunk noise ② steering wheel play or loose wandering steering ③ uneven tire feathered wear ④ excessive vibration ⑤ vehicle pulling to one side. A-Premium stands behind its meticulously crafted suspension kit with a one-year, unlimited-mileage warranty. Also, the reference number of kit is: K80026, K8607T, DS300008, DS80749, ES80754, ES80755, ES3420S, 1C3Z3050AB, 1C3Z3050BA, 2C3Z3050AA, 2C3Z3050BA, 4746813, 4796453, 4C3Z3049DA, 4C3Z3049DB, 5C3Z3304BA, 5C3Z3304BB, 5C3Z3304CB, 5C3Z3A131EA, 5C3Z3A131FA, 5C3Z3A131HA, 6C3Z3304B, 6C3Z3A131D, 6C3Z3A131E, 6C3Z3A131F
SEOCONTENT-START
IMPORTANT SAFETY RECALL
March 29, 2023
GILLIG
Campaign ID Number: 23V-075
This notice applies to your vehicle(s) [insert VINs]
This product presentation was made with AAWP plugin.





