NHTSA Campaign Number: 17V839
Manufacturer MV Agusta
USA, LLC
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 27
Front Brake Master Cylinder Failure
If the front brake master cylinder fails, the loss of front braking ability can increase the risk of a crash.
Summary
MV Agusta USA, LLC (MV Agusta) is recalling certain 2015-2016 F4 RC and F4 RR motorcycles. These motorcycles are equipped with Brembo front brake master cylinders that may fail.
Remedy
MV Agusta will notify owners, and dealers will replace the front brake master cylinder piston, free of charge. The began on January 19, 2018. Owners may contact MV Agusta customer service at 1-215-781-1770. MV Agusta’s number for this recall is 18RC01.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
29 January 2018
January 12, 2018
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock protection
- Ideal for hydraulic and disc brakes
- Ideal for hydraulic and disc brakes
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock protection
- Provides an extra margin of safety in extreme braking conditions (packaging may vary)
- Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy pedal
- Both wet and dry boiling points exceed the minimum government standards
- Exceeds DOT 3 regulations: Formulated to meet or surpass DOT 3 requirements, ensuring consistent braking performance and dependable stopping power in all conditions
- Premium high boiling point: Helps prevent vapor lock and brake fade under extreme heat, maintaining safe and reliable braking even in demanding situations
- Full synthetic formula: Provides superior resistance to moisture absorption and corrosion, helping protect vital brake system components for long-lasting performance
- Superior protection and performance: Designed to deliver reliable braking under extreme temperatures while supporting the safety and efficiency of the braking system
- Recommended applications: Suitable for ABS, disc, and drum brake systems; surpasses SAE J1703, FMVSS 116, and ISO 4925 DOT 3 specifications
- High quality blend of polyethylene glycol ethers and additives
- Compatible with all brake system rubber components and other brake fluids
- Prevents seal hardening or softening
- Protects against rust and corrosion
- Provides excellent lubricity
This product presentation was made with AAWP plugin.