23511 Brake Pressure Switch May Short and Cause Fire – 2017-2023 International CV Trucks

SEOCONTENT-START

OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-282 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Navistar, Inc. Submission Date : APR 20, 2023 NHTSA Recall No. : 23V-282 Manufacturer Recall No. : 23511 Manufacturer Information : Manufacturer Name : Navistar, Inc. Address : 2701 Navistar Drive Lisle IL 60532 Company phone : 331-332-1590 Population : Number of potentially involved : 9,170 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2017-2023 International CV Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : • The suspect population is identified by models equipped with feature code 04240 or 04190 (Brake system, hydraulic with Hydromax brake booster). • The inclusive dates of manufacture were determined by when the CV series went into production through the date the issue was contained in manufacturing. • The vehicles in the suspect population were built with the suspect brake pressure switch assembly and all other similar vehicles not subject to this recall were built with a redesigned brake pressure switch assembly. There are 9,170 CV series trucks in the suspect population. Production Dates : SEP 18, 2017 – MAR 21, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : These vehicles may have been built with a brake pressure switch assembly that allows brake fluid to leak beyond the diaphragm seal into the pressure switch. The brake fluid may seep into the switch’s electrical components and short the brake pressure switch and the associated fuse. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : If brake fluid shorts the brake pressure switch and the associated fuse, the circuit can generate excessive heat that can result in a fire increasing the risk of property damage or personal injury to the operator. Description of the Cause : a zinc nickel plating and sealant used to inhibit corrosion within the pressure switch assembly may cause delamination of the sealant which results in small Part 573 Safety Recall Report 23V-282 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 fragments of sealer underneath the diaphragm during assembly which allows brake fluid to slowly seep past the seal. Identification of Any Warning that can Occur : This condition may set a “service brake system” malfunction indicator lamp. Until the recall remedy is performed, affected owners are advised to park their vehicles outdoors. Involved Components : Component Name 1 : Switch, park brake, HPB system Component Description : Brake pressure switch assembly Component Part Number : 4052584C1 or 4166720C1 Supplier Identification : Component Manufacturer Name : Kodiak Controls (Kodiak) Address : 734 Oakridge Dr. Romeoville Illinois 60446 Country : United States Chronology : The Chronology Exceeds the 2000 character limit and will be submitted as a supporting miscellaneous document.. Description of Remedy : Description of Remedy Program : • The remedy will involve replacing the brake pressure switch assembly and any wire harness found with brake fluid at the brake pressure switch connector or the associated fuse. • Navistar’s plan for reimbursement of pre-notification remedies, on file with NHTSA and dated 05/06/2022, applies and reimbursement instructions will be included in the customer notification. How Remedy Component Differs from Recalled Component : The remedy brake pressure switch assembly is built without the corrosion inhibitor sealant where the recalled brake pressure switch assembly was built with the corrosion inhibitor sealant. Part 573 Safety Recall Report 23V-282 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Identify How/When Recall Condition was Corrected in Production : 03/21/2023 – Navistar Manufacturing began use of a redesigned brake pressure switch assembly (without the corrosion inhibitor sealant). Recall Schedule : Description of Recall Schedule : It is estimated that the Customer and Dealer notification letters will be mailed by 06/19/2023. Planned Dealer Notification Date : JUN 19, 2023 – JUN 19, 2023 Planned Owner Notification Date : JUN 19, 2023 – JUN 19, 2023 * NR – Not Reported

**************************************************************************************************************

**************************************************************************************************************

**************************************************************************************************************

**************************************************************************************************************

SEOCONTENT-END