June 30, 2023 NHTSA CAMPAIGN NUMBER: 23V460000
Brake hose
failure can cause a loss of braking ability and increase the risk of a crash.
NHTSA Campaign Number: 23V460
Manufacturer Stoughton Trailers, LLC
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 55
Summary
Stoughton Trailers, LLC (Stoughton) is recalling certain 2024 CCGN-40T trailers. The brake hose
may be the incorrect length and have inadequate or missing air tank fasteners, which can result in brake hose
failure.
Remedy
Dealers will replace the brake hoses, and inspect and install any inadequate air tank fasteners, free of charge. Owner notification letters are expected to be mailed July 13, 2023. Owners may contact Stoughton customer service at 1-608-873-2580.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Purpose:
This work instruction provides details on what to inspect and how to perform recall repairs for the 40ft chassis.
Scope:
This work instruction applies to 40ft chassis manufactured between Jan 1, 2023 and June 30, 2023.
Item 1 – Both Lengths of Brake Hoses Too Tight
Corrective Actions
Step 1 – Remove 28in Hoses
Step 2 – Move 32in Hoses to Same Side Connections
Step 3 – Install 34in Hoses to Diagonal Connections Routing Longer Hoses on Top of Shorter Hoses
Step 4 – Install Hose Separators as Shown
Item 2 – Air Tank Fasteners Loose/Shy
Corrective Actions
Step 1 – Install and Tighten Fasteners Until Rubber Pad Compresses to No Less Than Approx ¾ of its Thickness
Chronology :
Received report from customer that they had a concern with a unit on June1, 2023. All units were placed on hold from shipping from our facility on June 1, 2023. Started investigation with units at our facility and found similar results as customer.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| STOUGHTON | CCGN-40T | 2024 |
3 Associated Documents
Recall Acknowledgement
RCAK-23V460-6158.pdf 645.711KB
Defect Notice 573 Report
RCLRPT-23V460-2913.PDF 214.763KB
Remedy Instructions and TSB
RCRIT-23V460-9819.pdf 1027.721KB
Latest Recalls Documents
- 【FEATURES】Automatic Slack Adjuster Release Tool Wrench Set is designed to simplify installation and servicing of air brake systems in heavy-duty trucks, long-haul trucks, and trailers. This tool set makes brake service tasks easier and more efficient.
- 【Ease of Use】 The fork-end release tool securely fits under the brake system's pull pawl, allowing hands-free operation for servicing your truck. The tool is designed to release the tensioner button and safely adjust the brakes without prying or causing damage.
- 【Convenient for Any Mechanic Tool Set】The 5/16" double square ratcheting wrench with E-Z Grip handle adjusts the brake with ease. It features a side-mounted forward/reverse lever for simple operation.
- 【Time-Saving and Efficient】 The tools are made of durable carbon steel with oversized double injection handles that are comfortable to grip and use. Additionally, the double square offset reversible truck wrench provides reversible ratcheting action with an angled head for clearance.
- 【Quality Assurance】We are committed to providing high-quality products, and if you're not satisfied with our Automatic Slack Adjuster Release Tool Set, please feel free to contact us. We will do our best to address your concerns and solve any problems you may have.
- 3 TYPES OF BRASS FITTINGS: This set includes DOT push-to-connect fittings, compression nylon tube fittings, and brass pipe fittings. It can be used for maintenance work in various scenarios, such as air brake systems and pipelines, to meet most of your needs
- 200PCS DOT FITTINGS SET: 30Pcs DOT push-to-connect fittings:7pcs straight male connector,7pcs 90°male elbow,6pcs union connector,4pcs union tee,4pcs 45°male elbow,2pcs schrader valve;123Pcs DOT compression nylon tube fittings:7pcs straight male connector,7pcs 90°male elbow,6pcs union connector,4pcs union tee,4pcs 45°male elbow,95pcs sleeve ferrules;45Pcs Brass pipe fittings:6pcs hex coupling,6pcs hex nipple,6pcs hex bushing,6pcs extension adapter,3pcs 90° street elbow,6pcs hex plug,12pcs socket plug;1pc 4m teflon tape;1pc tube cutter
- PREMIUM MATERIAL: These fittings are made of high-quality CA360 brass and meet D.O.T FMVSS 571.106, Air Brake system Requirements, with corrosion resistance, high-temperature flexibility, and low permeability
- PRESSURE RANGE: Airline fittings have pressure resistance, making them less likely to trip. Air brake fittings working pressure from vacuum max to 300 PSI. Temperature Range: -40° F to +250° F(Note: see tubing manufacturer’s recommendations for pressure and temperature limitations)
- EASY TO INSTALL: Our 200pcs fitting kit is easy to use in air systems and pipe connections. You need to use tools to fix loose parts to handle in tight places so that they will be firmer and not easily fall off. Some pieces that contain a threaded end already have sealant pre-applied, and we send Teflon tape as a gift to provide a secure connection
- TYPE - Air Brake Chamber Type 3030 30/30 30 30
- REPLACEMENT - Bendix
165255 K049898 NT3030STD120 NT3030STD-120 802547 // Meritor
3030TN2-HNTRX-C // Dayton 3030C // Haldex
GC3030 GC3030P40 // Freightliner
3030TS // Mack
19QE441RP1 - SPECS - Brake Chamber Type: 3030 // Stroke: Standard // Stroke Length: 2-1/2" // Port Thread: 2x3/8" NPT // Bolt Thread: 5/8"-11 UNC // Push Rod Length: 11-3/4" // Weight: 21lbs
- FEATURES -
- WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
- SPECIFICATION & CERTIFICATION: Package including: 1 pc 15 FT red&blue 3-in-1 air lines kit, 2 pcs 16" tender spring kits, 1 pair glad hands, 1 pair gladhand handles, 1 pc gladhand holder, 4 pcs gladhand seals, Teflon tape. Certification: [SAE J2394 - 4/12-2/10-1/8, -65℃/-85℉ for ABS Green Cable], [DOT SAE J1402A 3/8" ID Air Hose], [SAE J560 for Plug]
- BOTH ENDS SPRING JOINT: Both ends of air brake hoses and ABS cables are protected by stainless steel springs. The spring joint with good elasticity can protect the wires well, and have a cushioning role when installing and using a wire. Therefore, our semi truck trailer air hose line kits have reliable security and long service life
- ALUMINUM GLADHAND HANDLE: The CheeMuii air brake hoses are directly equipped with aluminum grips instead of rubber grips that are easily damaged and aged. We are committed to providing you with safer and more durable products
- AIR BRAKE LINES: The CheeMuii red and blue air lines' double-braided design consists of interwoven spirals and is manufactured using a 3-layer integrated molding process. The air line hose assembly has higher burst pressure and better resistance to twisting, with a safer and longer service life
- 7 WAY ELECTRICAL CABLE: The power lines use the industry standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck, which meets SAE J560 testing and performance requirements. Both ends of ABS cables are protected by stainless steel springs. The spring joint can not only protect the wires well, but also have a cushioning role when installing and using
Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-460 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Stoughton Trailers, LLC Submission Date : JUN 30, 2023 NHTSA Recall No. : 23V-460 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Stoughton Trailers, LLC Address : 416 South Academy Street Stoughton WI 53589-0606 Company phone : 608-873-2500 Population : Number of potentially involved : 55 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2024-2024 Stoughton Trailers CCGN-40T Vehicle Type : Body Style : Power Train : NR Descriptive Information : received report from customer with a concern. secured the units in our possession from being shipped This product was only produced in 1 location and has a different design than others Production Dates : FEB 14, 2023 – APR 13, 2023 VIN Range 1 : Begin : 1DW4C4023RPB47464 End : 1DW4C4025RPB49118 ✔ Not sequential Description of Defect : Description of the Defect : Incorrect brake hose
length which could result in potential brake hose
failure. Inadequate or missing air tank fasteners. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Potential of air loss to braking system which could cause an accident Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 23V-460 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Brake hose
’s Component Description : NR Component Part Number : NR Component Name 2 : Air tank fasteners Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : Received report from customer that they had a concern with a unit on June1, 2023. All units were placed on hold from shipping from our facility on June 1, 2023.Started investigation with units at our facility and found similar results as customer. Description of Remedy : Description of Remedy Program : Replace brake hoses with correct length. Inspect and install any inadequate air tank fasteners. Stoughton Trailers will provide replacement parts and reimburse all labor associated with making necessary repair. How Remedy Component Differs from Recalled Component : Longer length hose to prevent premature failure Identify How/When Recall Condition was Corrected in Production : Production was paused and all units were placed on hold, June 6,2023. Correct hose length will be installed when supply is received. Air tank fasteners will be confirmed and corrected if required. No units will ship until repaired. Part 573 Safety Recall Report 23V-460 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : JUL 13, 2023 – JUL 14, 2023 Planned Owner Notification Date : JUL 13, 2023 – JUL 14, 2023 * NR – Not Reported
**************************************************************************************************************
…The Difference is Quality 40ft Chassis RECALL (External Use) Page 1 of 2 Document ID (External Use) Revision A Revised By JZimmer Approved By JZimmer A. Purpose: This work instruction provides details on what to inspect and how to perform recall repairs for the 40ft chassis. B. Scope: This work instruction applies to 40ft chassis manufactured between Jan 1, 2023 and June 30, 2023. Item 1 – Both Lengths of Brake Hoses Too Tight BAD CORRECT Corrective Actions Step 1 – Remove 28in Hoses Step 2 – Move 32in Hoses to Same Side Connections Step 3 – Install 34in Hoses to Diagonal Connections Routing Longer Hoses on Top of Shorter Hoses Step 4 – Install Hose Separators as Shown (CONTINUED) …The Difference is Quality 40ft Chassis RECALL (External Use) Page 2 of 2 Document ID (External Use) Revision A Revised By JZimmer Approved By JZimmer Item 2 – Air Tank Fasteners Loose/Shy BAD CORRECT Corrective Actions Step 1 – Install and Tighten Fasteners Until Rubber Pad Compresses to No Less Than Approx ¾ of its Thickness
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





