FL980 – Driveshaft May Break – 2023-2024 Thomas Built Bus SAF-T-Liner C2 School Buses

August 1, 2023 NHTSA CAMPAIGN NUMBER: 23V538000

Driveshaft May Break

A broken driveshaft can separate and cause a loss of drive power, increasing the risk of a crash.

 

NHTSA Campaign Number: 23V538

Manufacturer Daimler TruckseBay logo North America, LLC

Components POWER TRAIN

Potential Number of Units Affected 614

 

Summary

Daimler TruckseBay logo North America, LLC (DTNA) is recalling certain 2023-2024 Thomas Built Bus SAF-T-Liner C2 school buses. The driveshafts can break under certain loading conditions.

 

Remedy

Dealers will replace the driveshafts, free of charge. Owner notification letters are expected to be mailed September 30, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL980.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

On July 26, 2023, DTNA received a copy of the Defect Information Report that DanaeBay logo filed a recall for a certain lot of potentially defective drive shafts after completing an analysis of a single drive shaft failure in April of 2023. After reviewing preliminary information furnished from DanaeBay logo, DTNA was able to match a suspect population range. On July 31, 2023, DTNA decided to file a vehicle companion recall to support DanaeBay logo’s recall for this issue. DTNA is not aware of any accidents or injuries related to this issue. DTNA anticipates the recall population may be adjusted after receiving additional information from DanaeBay logo cross-referencing part serial number to truck VINs. DTNA found 1 total warranty claim related to this issue.

 


2 Affected Products

Vehicle

MAKEMODELYEAR
THOMAS BUILT BUSESSAF-T-LINER C22023-2024

 


3 Associated Documents

Defect Notice 573 Report

RCLRPT-23V538-3509.PDF 213.673KB

 


Recall Acknowledgement

RCAK-23V538-8751.pdf 652.696KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-23V538-3376.pdf 228.888KB

 


Latest Recalls Documents

 


 

Bestseller No. 1
Lisle 42890 U-Joint Pullers, Small
  • quickly and easily removes sealed u-joint caps without damage to driveshafts, yokes or bearing caps.
  • two sizes to work on many cars, trucks and ag equipment.
  • heat-treated threads and casting for durability.
  • "42890 works on cars, light-duty trucks and ag equipment with 1" to 1.25" bearing caps"
  • Fit type: Vehicle Specific
Bestseller No. 2
Acymner Ball Joint Press & U Joint Removal Tools | Heavy Duty Ball Joint Service Tool with 4-Wheel Drive Adapters for Most 2WD and 4WD Car Pickup and Light Truck (Blue)
  • Heavy duty forged ball joint press kit is excellent for removal and installation of press-fit parts such as ball joints, U joint and brake anchor pins for most 2WD and 4WD cars and light trucks. Heat treated C clamp puller can excellent press rusted parts effortlessly.
  • This ball joint removal tool can be used to remove upper/lower ball joints, install upper/lower ball joints, remove/install brake anchor pin, disassemble/assemble universal U joints.
  • The heavy duty 4-wheel drive u joint removal tool is compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars. It allows service for 1/2 and 3/4 ton 4WD vehicles with the DanaeBay logo 30 or 44 front axle (found on FordeBay logo, GM, DodgeeBay logo, IHC and JeepeBay logo vehicles).
  • Package Included: Ball Joint Tool: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • Blow Mold Carring Case: The ball joint removal tool is packed in a heavy-duty case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.
Bestseller No. 3
GEAROLL U Joint Pullers Automotive, Universal Joint Extractor 10105 Extractor U-Joint Removal Press Tool for Automotive Trucks, Cars, Class 1-3
  • Great Compatibility: Suitable for bearing cups ranging from 1" to 1.25" , this universal joint puller is compatible with most Class 6 and 8 trucks and machinery, offering versatile use in various scenarios.
  • Upgraded and optimized: The legs are raised and thickened and heat-treated to make it stronger and less prone to bending. Thicken the stress surface so that it is not easy to break.
  • Heavy-Duty Construction: Crafted from sturdy tool steel with a black anodized finish, our U-Joint puller is built to withstand extreme conditions. It ensures superior durability and corrosion resistance, ensuring long-lasting performance.
  • Wide Application: This tool is versatile for various applications, including removing gaskets, springs, oil seals, and O-rings from automobiles, enhancing its usability.
  • More efficient and labor-saving: The package comes with a socket that used with up to a 1/2 inch wrench.
Bestseller No. 4
DAYUAN Ball Joint Press & U Joint Removal Tool Kit, Red Case
  • This Ball Joint Press & U Joint Removal Tool compatible for most 2WD and 4WD cars and light trucks
  • This tool set is made of ultra carbon steel;these components will stand up to heavy use and accidental drops
  • The ball joint press kit is an indispensable tool for your garage; Excellent for removal and installation of press-fit parts such as ball joints. Universal joints and truck brake anchor pins
  • This versatile ball joint removal tool kit can also remove rusted and corroded parts and easily tighten rusted parts
  • Set contains C-frame press, 3 receiver tubes sizes: 2-3/4”x3"", 2-1/4”x 2-1/2” & 1-3/4”x2”, installation and removing adapters.
SaleBestseller No. 5
OMT Ball Joint Press Kit, Ball Joint Removal Tool with 4x4 Adapters
  • 1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
  • 2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
  • 3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the DanaeBay logo 30 or 44 front axle (compatible with FordeBay logo, GM, DodgeeBay logo, IHC and JeepeBay logo vehicles).
  • 4.CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • 5.ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...