October 27, 2023 NHTSA CAMPAIGN NUMBER: 23V728000
Missing Seat Fasteners/FMVSS 207
Missing fasteners may allow the seat to move during a crash, increasing the risk of injury.
NHTSA Campaign Number: 23V728
Manufacturer Winnebago
Industries, Inc.
Components SEATS
Potential Number of Units Affected 280
Summary
Winnebago Industries, Inc. (Winnebago) is recalling certain 2024 Solis motorhomes. The fasteners that secure the sliding seat in the extended position are missing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 207, “Seating Systems.”
Remedy
Dealers will install the missing fasteners, free of charge. Owner notification letters are expected to be mailed December 23, 2023. Owners may contact Winnebago customer service at 1-641-585-6939 or 1-800-537-1885. Winnebago’s number for this recall is 180.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On or about October 18, 2023 during normal quality inspections, two fasteners were identified missing from the structure used to secure the sliding seat in the extended position. An investigation was opened. The Product Safety Committee met to review the findings of the investigation, at which time it was determined the missing fasteners presented an unreasonable risk to motor vehicle safety and were non-compliant to FMVSS 207.
Winnebago is not aware of any incidents or injuries related to the recall condition.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| WINNEBAGO | SOLIS | 2024 |
2 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-23V728-9908.PDF 213.431KB
Recall Acknowledgement
RCAK-23V728-8263.pdf 645.526KB
Latest Recalls Documents
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PRECISE & HIGH QUALITY - Manufactured in Taiwan, our torque wrench is engineered for superior precision. It ships pre-calibrated to +/- 4% accuracy, ensuring dependable results every time. Includes a calibration certificate with a trackable serial number for your assurance.
- DURABLE - Built to last, featuring a reinforced ratchet gear head made from hardened, heat-treated Chrome Vanadium alloy steel for maximum strength and durability.
- LONGEVITY - Protect your investment with our proprietary Electro-Black finish, providing advanced rust and corrosion resistance for extended tool life.
- PERFORMANCE - Easily read and set torque levels with our patent-pending dual-range scale. The high-contrast, yellow-on-black markings are designed for easy visibility, even in low-light conditions.
- OMFORT - Equipped with a reversible ratchet head that drives in both directions and measures torque in a clockwise direction. The ergonomic, knurled handle ensures a non-slip, comfortable grip, reducing hand fatigue.
- 【9-in-1 Torque Solution】Complete set includes 1/4", 3/8", and 1/2" drive click torque wrenches plus 6 essential adapters (extension bars, universal joint, drive adapters) securely stored in a sturdy portable case.
- 【High Precision & Dual Scales】Factory-calibrated to ±3% accuracy with included certificate; features dual-range scales (1/4": 10-220 in.lb, 3/8": 5-45 ft.lb, 1/2": 10-170 ft.lb) for versatile application coverage.
- 【Clear & Safe Audible Click】Upgraded loud "Click" sound provides a distinct, reliable signal (strong over 5 N.m, subtle under) when preset torque is reached, preventing overtightening and ensuring safety.
- 【Smooth 72-Tooth Ratchet & Quick Release】Reversible 72-tooth ratchet head offers a low 5° arc swing for use in tight spaces and smooth operation in both directions. Quick-release button ensures secure socket changes.
- 【Durable Construction & Wide Use】Hardened Cr-V steel ratchet heads and phosphated adapters resist wear; aerospace aluminum handles ensure lightweight strength and corrosion resistance. Ideal for precise torque on bikes, motorcycles, cars, trucks, wheels, and industrial applications. Backed by 24-month support.
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- 3/8 inch drive torque wrench with 15-80 ft.-lb./20.4-108.5 Nm range; reminder: to prevent the ratchet from breaking, please do not overload the torque wrench
- Durable ratchet head made from hardened treated Chrome Vanadium steel alloy (Cr-V); bright, full polish chrome finish wipes easily clean and resists rust and corrosion
- High contrast and dual range scale pre-calibrated to ± 4%; tips: for precise scale adjustment, please use the imperial scale; the conversion formula between imperial scale and metric scale is 1 Nm = 8.86 in-lbs
- Includes sturdy plastic case for storage and portability
- NOTE: unlock before adjusting the torque value, lock after adjusting for stability of working torque; when finished, loosen locking ring and adjust to the lowest value for next use
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-728 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Winnebago Industries, Inc. Submission Date : OCT 27, 2023 NHTSA Recall No. : 23V-728 Manufacturer Recall No. : 180 Manufacturer Information : Manufacturer Name : Winnebago Industries, Inc. Address : PO BOX 152 605 W. Crystal Lake Rd. Forest City IA 50436 Company phone : 1-641-585-3535 Population : Number of potentially involved : 280 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2024-2024 Winnebago Solis Vehicle Type : Body Style : Power Train : NR Descriptive Information : The basis for determining the recall population is to include all T36B units built from start of production. Production Dates : JUN 30, 2023 – OCT 23, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Required fasteners for seating compliance to FMVSS 207 are missing. FMVSS 1 : 207 – Seating systems FMVSS 2 : NR Description of the Safety Risk : Failure to meet FMVSS 207 can increase the risk of injury in the event of a crash. Description of the Cause : During installation of the structure used to secure the sliding seat, two fasteners were not installed. Identification of Any Warning that can Occur : There are no warnings which occur. Involved Components : Part 573 Safety Recall Report 23V-728 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : On or about October 18, 2023 during normal quality inspections, two fasteners were identified missing from the structure used to secure the sliding seat in the extended position. An investigation was opened. The Product Safety Committee met to review the findings of the investigation, at which time it was determined the missing fasteners presented an unreasonable risk to motor vehicle safety and were non-compliant to FMVSS 207. Winnebago is not aware of any incidents or injuries related to the recall condition. Description of Remedy : Description of Remedy Program : Remedy to correct the recall condition includes installation of the missing fasteners. Reimbursement requests will follow the general reimbursement plan on file with NHTSA. How Remedy Component Differs from Recalled Component : The remedy component includes the appropriate fasteners. Identify How/When Recall Condition was Corrected in Production : The recall condition was corrected in production through work instructions and training. Recall Schedule : Part 573 Safety Recall Report 23V-728 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Recall Schedule : Recall schedule will follow the 60 day requirement. Planned Dealer Notification Date : NOV 02, 2023 – NOV 02, 2023 Planned Owner Notification Date : DEC 23, 2023 – DEC 23, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.