November 7, 2023 NHTSA CAMPAIGN NUMBER: 23V748000
Delay in Park Brake Engagement/FMVSS 121
Unintentional vehicle movement can increase the risk of a crash or injury.
NHTSA Campaign Number: 23V748
Manufacturer Alexis Fire Equipment Company
Components PARKING BRAKE
Potential Number of Units Affected 27
Summary
Alexis Fire Equipment Company (Alexis Fire) is recalling certain 2021-2024 Fire Apparatus vehicles built on Spartan Chassis. A defect in the inversion valve may delay park brake engagement, which could allow the vehicle to move unintentionally. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, “Air Brake Systems.”
Remedy
Dealers will inspect and replace the inversion valves as necessary, free of charge. Owner notification letters were mailed November 20, 2023. Owners may contact Alexis Fire customer service at 1-309-482-6121.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
COMPONENT:
Spartan Fire
2022-2024, Gladiator, MetroStar, FC-94 model emergency response chassis cabs.
PROBLEM DESCRIPTION:
Potential delay in the park brake setting after the park brake valve is activated caused by a defect in the inversion valve utilized by Spartan Motors. The inversion valve was determined to be out of specification but Spartan Motors is still investigating the root cause.
CONSEQUENCE:
If the vehicle has a defective inversion valve, the park brake engagement may be intermittently delayed, not within 3 seconds and fail to comply with the requirements of the Federal Motor Vehicle Safety Standards (FMVSS) number 121 “Air Brake Systems”. This may result in inadvertent vehicle movement and possible injury or crash.
REPAIR PROCEDURE & CUSTOMER ACTION:
We will work with you to contact your local dealer for facilitating the inspection and if your vehicle is found to have the defect, the replacement of the defective inversion valve. There is no cost to the vehicle owner for the recall remedy. The inspection and repair will take approximately 1 hour to complete. To find your nearest dealer, please visit www.alexisfire.com.
Chronology :
Alexis Fire Equipment was notified by Spartan Fire
LLC of the possible safety defect along with the list of chassis/vehicles sold to Alexis Fire Equipment that could have the possible safety defect. All testing and decision for the safety defect recall was completed by Spartan File LLC.
4 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| ALEXIS FIRE EQUIPMENT | FIRE APPARATUS | 2021-2024 |
3 Associated Documents
Defect Notice 573 Report
RCLRPT-23V748-8278.PDF 213.893KB
Recall Acknowledgement
RCAK-23V748-9141.pdf 704.519KB
Owner Notification Letter(Part 577)
RCONL-23V748-3099.pdf 203.045KB
Latest Recalls Documents
- 3 TYPES OF BRASS FITTINGS: This set includes DOT push-to-connect fittings, compression nylon tube fittings, and brass pipe fittings. It can be used for maintenance work in various scenarios, such as air brake systems and pipelines, to meet most of your needs
- 200PCS DOT FITTINGS SET: 30Pcs DOT push-to-connect fittings:7pcs straight male connector,7pcs 90°male elbow,6pcs union connector,4pcs union tee,4pcs 45°male elbow,2pcs schrader valve;123Pcs DOT compression nylon tube fittings:7pcs straight male connector,7pcs 90°male elbow,6pcs union connector,4pcs union tee,4pcs 45°male elbow,95pcs sleeve ferrules;45Pcs Brass pipe fittings:6pcs hex coupling,6pcs hex nipple,6pcs hex bushing,6pcs extension adapter,3pcs 90° street elbow,6pcs hex plug,12pcs socket plug;1pc 4m teflon tape;1pc tube cutter
- PREMIUM MATERIAL: These fittings are made of high-quality CA360 brass and meet D.O.T FMVSS 571.106, Air Brake system Requirements, with corrosion resistance, high-temperature flexibility, and low permeability
- PRESSURE RANGE: Airline fittings have pressure resistance, making them less likely to trip. Air brake fittings working pressure from vacuum max to 300 PSI. Temperature Range: -40° F to +250° F(Note: see tubing manufacturer’s recommendations for pressure and temperature limitations)
- EASY TO INSTALL: Our 200pcs fitting kit is easy to use in air systems and pipe connections. You need to use tools to fix loose parts to handle in tight places so that they will be firmer and not easily fall off. Some pieces that contain a threaded end already have sealant pre-applied, and we send Teflon tape as a gift to provide a secure connection
- 【Designed to withstand application extremes】The Dazakoot air line hose uniform dual-braided design consists of interwoven spirals providing greater flexibility and improved twist resistance compared to other spiral designs.
- 【Sprcifications】Meets or exceeds SAE J1402 - Type A - DOT FMVSS No. 106 - Air Brake Hoses, 49 CFR 571.106. 3/8" hose I.D - 1/2" end fittings. Designed for operating pressures up to 225 psi, Operating temperature of -40˚F to +200˚F (-40˚C to +93˚C) Replaces: Tectran 13S15401, Tremec Sloan 455180DSET, Philips 11-8115.
- 【Spring Joint】Air Brake Hose
Assembly designed with large Red & Blue air line with a spring guard for easy coupling and uncoupling, these air lines save you time and effort. Plus, their durable construction and easy-to-install design provide peace of mind and reliable performance for years to come. - 【360°Swivel End Fitting】 Swivel design featuring all brass construction, corrosion free 360°swivel fitting has long lifespan, with SAE standard 1/2 inch NPT port, threaded with seal glue to prevent leakage.
- 【All Parts in One】 Dazakoot has prepared a complete set of accessories for you, including: 1 pair of gladhand, 1 pair of extension grip, 2 rubber replacement seals. You don't have to visit multiple stores to equip yourself with these items. If you have any product issues, please contact Dazakoot customer service team, and they will provide you with assistance within 48 hours.
- 【FEATURES】Automatic Slack Adjuster Release Tool Wrench Set is designed to simplify installation and servicing of air brake systems in heavy-duty trucks, long-haul trucks, and trailers. This tool set makes brake service tasks easier and more efficient.
- 【Ease of Use】 The fork-end release tool securely fits under the brake system's pull pawl, allowing hands-free operation for servicing your truck. The tool is designed to release the tensioner button and safely adjust the brakes without prying or causing damage.
- 【Convenient for Any Mechanic Tool Set】The 5/16" double square ratcheting wrench with E-Z Grip handle adjusts the brake with ease. It features a side-mounted forward/reverse lever for simple operation.
- 【Time-Saving and Efficient】 The tools are made of durable carbon steel with oversized double injection handles that are comfortable to grip and use. Additionally, the double square offset reversible truck wrench provides reversible ratcheting action with an angled head for clearance.
- 【Quality Assurance】We are committed to providing high-quality products, and if you're not satisfied with our Automatic Slack Adjuster Release Tool Set, please feel free to contact us. We will do our best to address your concerns and solve any problems you may have.
- TYPE - Air Brake Chamber Type 3030 30/30 30 30
- REPLACEMENT - Bendix
165255 K049898 NT3030STD120 NT3030STD-120 802547 // Meritor
3030TN2-HNTRX-C // Dayton 3030C // Haldex
GC3030 GC3030P40 // Freightliner
3030TS // Mack
19QE441RP1 - SPECS - Brake Chamber Type: 3030 // Stroke: Standard // Stroke Length: 2-1/2" // Port Thread: 2x3/8" NPT // Bolt Thread: 5/8"-11 UNC // Push Rod Length: 11-3/4" // Weight: 21lbs
- FEATURES -
- WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
- 23 PCS PACKAGE: The 23 pcs DOT air brake fittings kit includes: 8 pcs 1/4 inch straight union DOT fittings, 8 pcs 3/8 inch straight union DOT fittings, 6 pcs 1/2 inch straight union DOT fittings, 1 pc tube cutter. DOT quick connect fitting assortment types: 1/4", 3/8", 1/2"
- PREMIUM QUALITY: The CheeMuii DOT air line quick connect fittings are made of high-quality CA360 brass, meet D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life
- QUICK CONNECT FITTINGS: Our DOT push to connect fittings are extremely easy to install, can be sealed by pushing the tube firmly into the fitting and are also simple to remove from the tube
- MAX WORKING INTENSITY: The brass DOT air fittings can be operated in pressures from vacuum to 300 psi and in temperatures from -40°F to +200°F (-40°C to +93°C). Note: see the tubing manufacturer's recommendations for pressure and temperature mutations
- WIDE APPLICATION: The DOT air brake fittings can be used with air suspension systems, copper tubing in airline brake systems, perfect for truck /RV repair air line leak, also ideal for industrial workshops, daily garden or lawn mower repair, towing machine hose connection, etc
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-748
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Alexis Fire Equipment Company
Submission Date : NOV 07, 2023
NHTSA Recall No. : 23V-748
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Alexis Fire Equipment Company
Address : 109 E Broadway Ave
PO Box 549 Alexis IL 61412
Company phone : 309-482-6121
Population :
Number of potentially involved : 27
Estimated percentage with defect : NR
Vehicle Information :
Vehicle 1 : 2021-2024 Spartan Fire
LLC Spartan Fire
Gladiator, Metro Star, FC-94
Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES
Body Style : OTHER
Power Train : DIESEL
Descriptive Information : The basis for this recall population are emergency response cab chassis equipped
with a Wabco inversion valve.
Quantity 10 – FC-94 – 2022 model year trucks affected.
Quantity 3 – MetroStar 2022 model year trucks affected.
Quantity 9 – FC-94 2023 model year trucks affected.
Quantity 2 – MetroStar 2023 model year trucks affected.
Quantity 2 – Gladiator 2023 model year trucks affected.
Quantity 1 – MetroStar 2024 model year truck affected.
Production Dates : JUN 01, 2022 – SEP 30, 2023
VIN Range 1 : Begin : NR End : NR Not sequential
Description of Defect :
Description of the Defect : A defect in the inversion valve may cause the park brake engagement to be
intermittently delayed. As such, these vehicles may fail to comply with the
requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121,
“Air Brake Systems”.
FMVSS 1 : 121 – Air brake systems
FMVSS 2 : NR
Description of the Safety Risk : If this condition exists, the park brake may not be applied within 3 seconds,
resulting in inadvertent vehicle movement and possible injury.
Description of the Cause : Spartan Fire
LLC has determined the inversion valve was determined to be out
of specification, but confirmation of root cause is still under investigation.
Part 573 Safety Recall Report 23V-748 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Identification of Any Warning
that can Occur :
The issue would be detectable by not hearing the audible set.
Involved Components :
Component Name 1 : Wabco Inversion Valve
Component Description : Inversion Valve
Component Part Number : 9718990020
Supplier Identification :
Component Manufacturer
Name : WABCO
Address : 1220 Pacific Dr
Auburn Hills Michigan 48326-1589
Country : United States
Chronology :
Alexis Fire Equipment was notified by Spartan Fire
LLC of the possible safety defect along with the list of
chassis/vehicles sold to Alexis Fire Equipment that could have the possible safety defect. All testing and
decision for the safety defect recall was completed by Spartan File LLC.
Description of Remedy :
Description of Remedy Program : Spartan Fire
LLC has provided a Recall Service Bulletin along with a list of
vehicles sold to Alexis Fire Equipment that may have the defective
inversion valve. Customers and dealers will be notified. Alexis Fire
Equipment and its Spartan Fire
LLC certified dealers will work with
customers having the affected vehicles to inspect and replace any defective
inversion valves according to the procedure listed in the provided Spartan
Fire LLC Recall Service Bulletin. Customers will not be billed for the time
necessary to inspect and replace any of the inversion valves on the
recalled vehicles.
How Remedy Component Differs According to the information provided by Spartan Fire
LLC the recalled
component does not have a green mark on the ID tag of the inversion
Part 573 Safety Recall Report 23V-748 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
from Recalled Component : valve.
Identify How/When Recall Condition
was Corrected in Production :
Information has not been provided by Spartan Fire
LLC. Any information
provided by Spartan Fire
LLC lists this as still under investigation.
Recall Schedule :
Description of Recall Schedule : Customer and dealer notification letters will be sent.
Planned Dealer Notification Date : NOV 14, 2023 – NOV 28, 2023
Planned Owner Notification Date : NOV 14, 2023 – NOV 28, 2023
* NR – Not Reported
**************************************************************************************************************
**IMPORTANT SAFETY RECALL**
This notice applies to your vehicle, [VIN]
NHTSA Recall No: XXXXX
November 21, 2023
Dear Alexis Fire Equipment Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Alexis Fire Equipment has decided, based on information provided by Spartan Fire
LLC, that a defect exists in certain model year 2021-2024, Gladiator, MetroStar, FC-94 model emergency response chassis cabs built between June 2022 and September 2023.
APPARATUS VIN: [OWNER VIN]
COMPONENT:
Spartan Fire
2022-2024, Gladiator, MetroStar, FC-94 model emergency response chassis cabs.
PROBLEM DESCRIPTION:
Potential delay in the park brake setting after the park brake valve is activated caused by a defect in the inversion valve utilized by Spartan Motors. The inversion valve was determined to be out of specification but Spartan Motors is still investigating the root cause.
CONSEQUENCE:
If the vehicle has a defective inversion valve, the park brake engagement may be intermittently delayed, not within 3 seconds and fail to comply with the requirements of the Federal Motor Vehicle Safety Standards (FMVSS) number 121 “Air Brake Systems”. This may result in inadvertent vehicle movement and possible injury or crash.
REPAIR PROCEDURE & CUSTOMER ACTION:
We will work with you to contact your local dealer for facilitating the inspection and if your vehicle is found to have the defect, the replacement of the defective inversion valve. There is no cost to the vehicle owner for the recall remedy. The inspection and repair will take approximately 1 hour to complete. To find your nearest dealer, please visit www.alexisfire.com.
WHO SHOULD YOU CONTACT WITH FURTHER QUESTIONS OR CONCERNS:
If you have any questions or concerns, please contact Alexis customer service at 800-322-2284. Or you can contact Spartan Fire
LLC directly at 1-800-867-6478.
If your dealer fails or is unable to remedy this defect without charge, or within a reasonable amount of time, you may submit a written complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey AVE SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
Federal law requires that you forward a copy of this safety recall notice to the lessee within 10 days.
You may be eligible to receive a reimbursement for the cost of repairs made prior to receiving this notice. You may submit your receipts along with the attached Reimbursement Request Form online at [MFR website] or by mail [mailing address].
If you no longer own the vehicle, contact Alexis Customer Assistance at 800-322-2284.
Alexis Fire Equipment is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Alexis Fire Equipment Company
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





