Delay in Park Brake Engagement – 2021-2024 Alexis Fire Fire Apparatus

November 7, 2023 NHTSA CAMPAIGN NUMBER: 23V748000

Delay in Park Brake Engagement/FMVSS 121

Unintentional vehicle movement can increase the risk of a crash or injury.

 

NHTSA Campaign Number: 23V748

Manufacturer Alexis Fire Equipment Company

Components PARKING BRAKE

Potential Number of Units Affected 27

 

Summary

Alexis Fire Equipment Company (Alexis Fire) is recalling certain 2021-2024 Fire Apparatus vehicles built on Spartan Chassis. A defect in the inversion valve may delay park brake engagement, which could allow the vehicle to move unintentionally. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, “Air Brake Systems.”

 

Remedy

Dealers will inspect and replace the inversion valves as necessary, free of charge. Owner notification letters were mailed November 20, 2023. Owners may contact Alexis Fire customer service at 1-309-482-6121.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


COMPONENT:

Spartan FireeBay logo 2022-2024, Gladiator, MetroStar, FC-94 model emergency response chassis cabs.

 

PROBLEM DESCRIPTION:

Potential delay in the park brake setting after the park brake valve is activated caused by a defect in the inversion valve utilized by Spartan Motors. The inversion valve was determined to be out of specification but Spartan Motors is still investigating the root cause.

 

CONSEQUENCE:

If the vehicle has a defective inversion valve, the park brake engagement may be intermittently delayed, not within 3 seconds and fail to comply with the requirements of the Federal Motor Vehicle Safety Standards (FMVSS) number 121 “Air Brake Systems”. This may result in inadvertent vehicle movement and possible injury or crash.

 

REPAIR PROCEDURE & CUSTOMER ACTION:

We will work with you to contact your local dealer for facilitating the inspection and if your vehicle is found to have the defect, the replacement of the defective inversion valve. There is no cost to the vehicle owner for the recall remedy. The inspection and repair will take approximately 1 hour to complete. To find your nearest dealer, please visit www.alexisfire.com.

 


Chronology :

Alexis Fire Equipment was notified by Spartan FireeBay logo LLC of the possible safety defect along with the list of chassis/vehicles sold to Alexis Fire Equipment that could have the possible safety defect. All testing and decision for the safety defect recall was completed by Spartan File LLC.

 


4 Affected Products

Vehicle

MAKEMODELYEAR
ALEXIS FIRE EQUIPMENTFIRE APPARATUS2021-2024

 


3 Associated Documents

Defect Notice 573 Report

RCLRPT-23V748-8278.PDF 213.893KB

 


Recall Acknowledgement

RCAK-23V748-9141.pdf 704.519KB

 


Owner Notification Letter(Part 577)

RCONL-23V748-3099.pdf 203.045KB

 


Latest Recalls Documents

 


 

Bestseller No. 1
Ailbiuko 200 Pcs Brass DOT Air Brake Line & Compression Fittings Kit
  • 3 TYPES OF BRASS FITTINGS: This set includes DOT push-to-connect fittings, compression nylon tube fittings, and brass pipe fittings. It can be used for maintenance work in various scenarios, such as air brake systems and pipelines, to meet most of your needs
  • 200PCS DOT FITTINGS SET: 30Pcs DOT push-to-connect fittings:7pcs straight male connector,7pcs 90°male elbow,6pcs union connector,4pcs union tee,4pcs 45°male elbow,2pcs schrader valve;123Pcs DOT compression nylon tube fittings:7pcs straight male connector,7pcs 90°male elbow,6pcs union connector,4pcs union tee,4pcs 45°male elbow,95pcs sleeve ferrules;45Pcs Brass pipe fittings:6pcs hex coupling,6pcs hex nipple,6pcs hex bushing,6pcs extension adapter,3pcs 90° street elbow,6pcs hex plug,12pcs socket plug;1pc 4m teflon tape;1pc tube cutter
  • PREMIUM MATERIAL: These fittings are made of high-quality CA360 brass and meet D.O.T FMVSS 571.106, Air Brake system Requirements, with corrosion resistance, high-temperature flexibility, and low permeability
  • PRESSURE RANGE: Airline fittings have pressure resistance, making them less likely to trip. Air brake fittings working pressure from vacuum max to 300 PSI. Temperature Range: -40° F to +250° F(Note: see tubing manufacturer’s recommendations for pressure and temperature limitations)
  • EASY TO INSTALL: Our 200pcs fitting kit is easy to use in air systems and pipe connections. You need to use tools to fix loose parts to handle in tight places so that they will be firmer and not easily fall off. Some pieces that contain a threaded end already have sealant pre-applied, and we send Teflon tape as a gift to provide a secure connection
Bestseller No. 2
Dazakoot 15FT Rubber Red& Blue Air Brake Line Hose Kit
  • 【Designed to withstand application extremes】The Dazakoot air line hose uniform dual-braided design consists of interwoven spirals providing greater flexibility and improved twist resistance compared to other spiral designs.
  • 【Sprcifications】Meets or exceeds SAE J1402 - Type A - DOT FMVSS No. 106 - Air Brake Hoses, 49 CFR 571.106. 3/8" hose I.D - 1/2" end fittings. Designed for operating pressures up to 225 psi, Operating temperature of -40˚F to +200˚F (-40˚C to +93˚C) Replaces: Tectran 13S15401, Tremec Sloan 455180DSET, Philips 11-8115.
  • 【Spring Joint】Air Brake HoseeBay logo Assembly designed with large Red & Blue air line with a spring guard for easy coupling and uncoupling, these air lines save you time and effort. Plus, their durable construction and easy-to-install design provide peace of mind and reliable performance for years to come.
  • 【360°Swivel End Fitting】 Swivel design featuring all brass construction, corrosion free 360°swivel fitting has long lifespan, with SAE standard 1/2 inch NPT port, threaded with seal glue to prevent leakage.
  • 【All Parts in One】 Dazakoot has prepared a complete set of accessories for you, including: 1 pair of gladhand, 1 pair of extension grip, 2 rubber replacement seals. You don't have to visit multiple stores to equip yourself with these items. If you have any product issues, please contact Dazakoot customer service team, and they will provide you with assistance within 48 hours.
SaleBestseller No. 3
RYANSTAR RACING Slack Adjuster Release Tool Set for Air Brakes
  • 【FEATURES】Automatic Slack Adjuster Release Tool Wrench Set is designed to simplify installation and servicing of air brake systems in heavy-duty trucks, long-haul trucks, and trailers. This tool set makes brake service tasks easier and more efficient.
  • 【Ease of Use】 The fork-end release tool securely fits under the brake system's pull pawl, allowing hands-free operation for servicing your truck. The tool is designed to release the tensioner button and safely adjust the brakes without prying or causing damage.
  • 【Convenient for Any Mechanic Tool Set】The 5/16" double square ratcheting wrench with E-Z Grip handle adjusts the brake with ease. It features a side-mounted forward/reverse lever for simple operation.
  • 【Time-Saving and Efficient】 The tools are made of durable carbon steel with oversized double injection handles that are comfortable to grip and use. Additionally, the double square offset reversible truck wrench provides reversible ratcheting action with an angled head for clearance.
  • 【Quality Assurance】We are committed to providing high-quality products, and if you're not satisfied with our Automatic Slack Adjuster Release Tool Set, please feel free to contact us. We will do our best to address your concerns and solve any problems you may have.
Bestseller No. 4
Torque 2X Type 3030 Air Brake Chamber 2.5" Stroke for Semi Trucks Trailers
  • TYPE - Air Brake Chamber Type 3030 30/30 30 30
  • REPLACEMENT - BendixeBay logo 165255 K049898 NT3030STD120 NT3030STD-120 802547 // MeritoreBay logo 3030TN2-HNTRX-C // Dayton 3030C // HaldexeBay logo GC3030 GC3030P40 // FreightlinereBay logo 3030TS // MackeBay logo 19QE441RP1
  • SPECS - Brake Chamber Type: 3030 // Stroke: Standard // Stroke Length: 2-1/2" // Port Thread: 2x3/8" NPT // Bolt Thread: 5/8"-11 UNC // Push Rod Length: 11-3/4" // Weight: 21lbs
  • FEATURES -
  • WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
Bestseller No. 5
CheeMuii 23PCS Brass DOT Air Line Fittings Kit Push Lock DOT Straight Union
  • 23 PCS PACKAGE: The 23 pcs DOT air brake fittings kit includes: 8 pcs 1/4 inch straight union DOT fittings, 8 pcs 3/8 inch straight union DOT fittings, 6 pcs 1/2 inch straight union DOT fittings, 1 pc tube cutter. DOT quick connect fitting assortment types: 1/4", 3/8", 1/2"
  • PREMIUM QUALITY: The CheeMuii DOT air line quick connect fittings are made of high-quality CA360 brass, meet D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life
  • QUICK CONNECT FITTINGS: Our DOT push to connect fittings are extremely easy to install, can be sealed by pushing the tube firmly into the fitting and are also simple to remove from the tube
  • MAX WORKING INTENSITY: The brass DOT air fittings can be operated in pressures from vacuum to 300 psi and in temperatures from -40°F to +200°F (-40°C to +93°C). Note: see the tubing manufacturer's recommendations for pressure and temperature mutations
  • WIDE APPLICATION: The DOT air brake fittings can be used with air suspension systems, copper tubing in airline brake systems, perfect for truck /RV repair air line leak, also ideal for industrial workshops, daily garden or lawn mower repair, towing machine hose connection, etc

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...