Spindle Mount May Crack and Separate from Arm – 2023-2024 Belmont FlatTrak Trailers

February 13, 2024 NHTSA CAMPAIGN NUMBER: 24V105000

Spindle Mount May Crack and Separate from Arm

A spindle arm that separates from the spindle mount can cause a loss of vehicle control, increasing the risk of a crash.

 

NHTSA Campaign Number: 24V105

Manufacturer Belmont TrailerseBay logo LLC

Components STEERING

Potential Number of Units Affected 56

 

Summary

Belmont TrailerseBay logo LLC (Belmont) is recalling certain 2023-2024 FlatTrak trailers. The spindle mount may crack, resulting in the spindle mount and spindle arm separating.

 

Remedy

Dealers will repair the spindle, free of charge. Owner notification letters were mailed February 27, 2024. Owners may contact Belmont customer service at 1-717-556-0040.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

When first cracks were discovered, we made some calls to get some local trailers back to evaluate. We decided to do a complete recall when there was more than one trailer with the defect.

 


2 Affected Products

Vehicle

MAKEMODELYEAR
BELMONT TRAILERFLATRAK2023-2024

 


4 Associated Documents

Defect Notice 573 Report

RCLRPT-24V105-2451.PDF 212.394KB

 


Defect Notice 573 Report

RCLRPT-24V105-1887.PDF 212.394KB

 


Recall Acknowledgement

RCAK-24V105-4926.pdf 646.523KB

 


Owner Notification Letter(Part 577)

RCONL-24V105-2870.pdf 811.939KB

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

 


 

Bestseller No. 1
RigsNParts Trailer Idler Hub Kits with 5 on 4.5" Bolt Idler Hub & Round #84 Trailer Axle Spindle Fit for 3500 lb, Sets of 2
  • RigsNParts 2 X Trailer Idler Hub Kits 5 on 4.5" for 3500 lbs Trailer Axle Fits 1-1/16'' with 2 X #84 Trailer Axle Spindles
  • RigsNParts #84 Spindle with a 1.75" Diameter at Biggest end, Overall length: 8.25", Application: 3500 lbs Trailer Axles, Spindle Capacity: 1750 lbs Per Wheel
  • RigsNParts The Package Contains 2 pcs 3500 lbs Trailer Axle Spindle, 2 pcs Cotter Pin, 2 pcs Spindle Nut, 2 Spindle Washers,2 pcs 5 on 4.5" Trailer Hub, 2 pcs L68149 Inner Cone Bearings, 2 pcs L44649 Outer Cone Bearings, 2 pcs 1.719” I.D X 2.565” O.D Grease Seal,2 pcs E Z Lube Grease Cap with Rubber Plugs, 10 pcs Cone Wheel Nuts 1/2”-20 Thread
  • RigsNParts Trailer Idler Hub Kits Using Alloy Steel Materials, It Has Superior Corrosion Resistance and Durability.Trailer Hub Packaged in Bubble Boxes, Which can Effectively Avoid Zero Level Collision and Wear During Transportation
  • RigsNParts If You Purchase Trailer Hub Spindle Kit That does Not Meet Your Requirements, Please Contact Us in a Timely Manner
SaleBestseller No. 2
Trailer Spindle for 3,500 lb #84 Axle Weld On 1 3/4 inch Round with Brake Flange
  • 3500-pound steel #84 axle spindle
  • Weld-on butt end measures 1 3/4 inch diameter x 2 5/8 inch Length
  • 1 1/16" (44649 bearing) x 1 3/8" (68149 bearing) combination
  • 1.72" Inner Diameter seal surface
  • Accu Lube greaseable zerk fitting
Bestseller No. 3
RigsNParts Trailer Spindle Round BT8 EZ Lube Spindle for 2000lbs Trailer Axle Spindle BT8 3-3/8' 2 pcs
28 Reviews
RigsNParts Trailer Spindle Round BT8 EZ Lube Spindle for 2000lbs Trailer Axle Spindle BT8 3-3/8" 2 pcs
  • RigsNParts Trailer Axle Spindle Fit 2000 lbs Trailer Axle
  • BT8 Spindle Diameter: 1-1/2", Pindle Length 3-3/8", Overall Length: 8-1/4", Application: 2000 lbs Trailer Axles, Spindle Capacity: 1000 lbs
  • The Package Contains 2 pcs 2000 lbs Trailer Axle Spindle, 2 pcs Cotter Pin, 2 pcs Spindle Nut, 2 pcs Washer
  • The BT8 Trailer Spindle Only for Use with Inner and Outer Bearing L44643/L44610
  • If You Purchase Trailer Spindle Kit That does Not Meet Your Requirements, Please Contact Us in a Timely Manner
Bestseller No. 4
1409KMT Trailer Axle Kits with 4 on 4" Bolt Idler 1" Hub & Round Bt8 Spindle - Set of 2
  • This Trailer Axle Kit (pack of 2) with 4 on 4" Bolt Idler 1" Hub & Round BT8 Spindle .
  • Each hub is rated to 1,250 lbs , when used together can support up to 2,000 lbs. This hub fits standard length spindles, not "short spindles" .
  • Specifications:Axle Shaft Dia: 1-1/4" Steps down to 1" at Bearings,Axle Shaft Overall Length: 8-3/4",Hub Stud Length: 1-3/16",Stud Size: 7/16",Hub Dia: 5-1/2",C to C Bolt Pattern: - 2-7/8".
  • Package Includes:2 x BT8 4-4" Trailer Hub,2 x BT8 1" Trailer Spindle,4 x L44643 Bearing,2 x Cotter Pin,2 x 1" Spindle Nut & Washer,2 x 1-1/4" ID x 2" OD Grease Seal,2 x Dust Cap,10 x Cone Style Lug Nut.
  • 100% Brand New Aftermarket Replacement , Made of high quality stainless steel . If you have any question please feel free to contact us , we will reply you in 24 hours .
Bestseller No. 5
Thomletha 4 Sets Trailer Axle Kits with 4 on 4 Bolt Idler Hub and 1 Round BT8 Spindle
  • Specification: Bolt pattern: 4 on 4, Wheel stud size: 1/2 inch diameter x 1-5/16 inch long, Grease cap flange diameter: 1.988 inches, Load-bearing capacity: 2,000 pounds, BT8 is 8.75 in length
  • Features: Wheel hub surface with black coating, and dust cap surface zinc-plated, anti-corrosion and anti-rust, long-term service for your trailer
  • Includes: 4x 4 on 4 axle seat, 4x 1 BT8 circular spindle, 8x L44643/L44610, 4x 12192TB, 4x rubber plug dust cover, 16x 1/2-20 nuts, 4x cotter pin, 4x spindle nut and gasket
  • Quality: Made of good quality alloy steel and rubber and plastic, with strong hardness and long service life
  • Note: Please check compatibility and specifications before ordering to avoid buying unsuitable

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...