05-1741 – Unsecured Brake Line May Become Damaged – 2024 Elkhart Coach ELKC Transit Buses

February 23, 2024 NHTSA CAMPAIGN NUMBER: 24V136000

Unsecured Brake Line May Become Damaged

A loss of brake pressure increases the risk of a crash.

 

NHTSA Campaign Number: 24V136

Manufacturer Forest RivereBay logo Bus, LLC

Components SERVICE BRAKES, AIR

Potential Number of Units Affected 5

 

Summary

Forest RivereBay logo Bus, LLC (Forest RivereBay logo) is recalling certain 2024 Elkhart Coach ELKC transit buses. The brake lines may not be attached to the driver’s side frame rail. Unsecured brake line may contact the rail, damaging the lines and causing a loss of brake pressure.

 

Remedy

Dealers will secure and repair the rear brake lines, free of charge. Owner notification letters are expected to be mailed April 1, 2024. Owners may contact Forest RivereBay logo Customer Service Phone Number 1-800-348-7440. Forest RivereBay logo’s number for this recall is 05-1741.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


SECURING BRAKE LINES TO CHASSIS

164-001-2024

February 27, 2024

 

Purpose

This document outlines repairing a specific list of units that may have brake lines unsecured to the chassis.
The fix includes attaching P-clamps to secure brake lines to the chassis.

 

Resources Required

  • Self-tapping screws, PN 2024006671
  • Rubber P-clamps, PN 2023136417
  • Cordless or electric drill or screw gun
  • 3/16″ drill bit

 

Instructions

1. Identify manufacturing defect on the inside of the driver’s side frame rail, just under the rear cab mount (Figs. 1A and 2A).

 

2. Drill pilot hole in the chassis (3/16” drill in one place) for a self-tapping screw between the brake lines.
This will be between the two brake line couplers, 4” from top of frame rail and 4.5” from the front of square hole (Fig. 3).

NOTE: Picture is from the inside of the drivers side frame rail.

3. Attach P-clamps around each line making sure the holes are to the center (Fig. 4A).

 

4. Screw the self-tapping screw through both holes of the brake line clamps (Figs. 5A and 6A).

 

NOTE: Fig. 7 shows the finished repair.

NOTE: Make sure the brake lines that run over the driver’s side frame rail are not touching the frame rail.

Fig. 8 shows the correct placement of the brake lines. If the brake lines touch the frame rail, the lines could develop a hole causing loss of brake pressure.

 

 


Chronology :

On February 20, 2024, Forest RivereBay logo’s Office of Corporate Compliance (“OCC”) was notified by its supplier, LipperteBay logo Components, that when stretching the chassis, P-Clamps may not have been installed to hold the brake lines in place. OCC opened a research item.

On February 23, 2024, Forest Rivers Corporate Recall Committee voted to recall.

 


1 Affected Product

Vehicle

MAKEMODELYEAR
ELKHARTELKC2024

 


4 Associated Documents

Defect Notice 573 Report

RCLRPT-24V136-5958.PDF 214.092KB

 


Recall Acknowledgement

RCAK-24V136-9279.pdf 646.003KB

 


Remedy Instructions and TSB

RCRIT-24V136-1487.pdf 2474.088KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-24V136-7317.pdf 178.911KB

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

 


 

Bestseller No. 1
4LifetimeLines 3/16" x 25 ft Copper-Nickel Brake Line Replacement Kit – Inverted Flare Fittings Included, Hand-Bendable Tubing Coil, Corrosion Resistant, SAE & ISO Certified
  • Nickel-copper alloy is very flexible making for super easy bending & flaring for installation - You can hand bend our brake lines with no bending tools needed
  • Corrosion and Rust Resistant: Copper-nickel alloy resists rust, road salt, and moisture far better than standard steel brake line tubing. These lines are well-suited for vehicles in high-humidity environments, coastal regions, or areas where roads are regularly salted in winter.
  • SAE and ISO Certified: This tubing is tested and verified to meet Society of Automotive Engineers (SAE) and InternationaleBay logo Organization for Standardization (ISO) specifications, ensuring reliable performance and compliance with industry standards.
  • Complete Kit with 16 Inverted Flare Fittings: Includes 25 ft of 3/16" copper-nickel tubing coil and 16 inverted flare fittings in the most commonly needed sizes: 2x 3/16" (7/16-24), 10x 3/16" (3/8-24), 2x 3/16" (1/2-20), and 2x 3/16" (9/16-18) tube nuts — everything needed for a complete brake line replacement.
  • Ideal Replacement for Steel Brake Lines: Copper-nickel brake line tubing is a direct replacement for steel tubing on cars, trucks, and SUVs. The 25-foot coil provides sufficient length for most full-line replacement runs and is compatible with standard inverted flare brake fittings.
Bestseller No. 2
Rough Country Stainless Brake Lines for Jeep Wrangler JK w/4-6" Lift (2007-2018) - 24" FR & 22.5"RR Brake Line
  • DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines.
  • Stainless Steel replacements offer superior protection and a seriously long lifespan.
  • Braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines.
  • Durable outer layer prevents expansion of the internal Teflon layer. High Quality hollow fasteners at both ends of each brake line and S at both ends provide a leak-free flow path.
  • Backed by Rough Country's Lifetime Replacement
Bestseller No. 3
A-Premium Front Brake Hydraulic Hose Compatible with Ford, Mazda, Mercury
  • [Perfect Fitment] Compatible with FordeBay logo Escape 2008-2012; Compatible with MazdaeBay logo Tribute 2008-2011; Compatible with MercuryeBay logo Mariner 2008-2011 --- Front Left and Right, Driver and Passenger Side
  • [Reference Number]: 2202900, H621031, 8L8Z2078B, 9L8Z2078A, BL8Z2078A, ZZCB43980, ZZCB43980A
  • [Superior Quality] A-Premium Brake Hydraulic Oil Hose consists of EPDM rubber and stainless steel fittings, meeting DOT certification standards, Federal Motor Vehicle Safety Standards (FMVSS 106) and SAE J1401 Standards. Premium craftsmanship and materials ensure superior quality and durability, and excellent performance enhances the whole braking system.
  • [Directly Fit] OE Replacement Brake Hydraulic Oil Pipe Line. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before.
  • [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted Brake Hydraulic Hose. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
Bestseller No. 4
Ailbiuko 3/16" 1/4" Brake Line Tubing Kit,25FT Tube with 60Pcs Fittings
  • VALUE PACK: This kit include: 1 x 3/16" brake line; 1 x 1/4" brake line; 24 x 3/16" (3/8-24) Inverted Tube Nut; 4 x 3/16” (7/16-24) Inverted Tube Nut; 2 x 3/16” (1/2-20) Inverted Tube Nut; 2 x 3/16"(9/16-18) Inverted Tube Nut;2 x 3/16" (3/8-24) Inverted Tube Union;18 x 1/4”(7/16-24) Inverted Tube Nut; 2 x 1/4”(1/2-20) Inverted Tube Nut; 2 x 1/4”(9/16-18) Inverted Tube Nut; 2 x 1/4”(7/16-24) Inverted Tube Union
  • PREMIUM MATERIAL: Our brake line is made of high-quality copper plated with a unique surface treatment, providing superior corrosion resistance and flexibility compared to standard steel lines for long-term use
  • MULTIPLE SIZES: The unions and nuts have 4 sizes: 3/8-24 threads,7/16-24 threads, 1/2-20 threads, 9/16-18 threads (regular 3/16 & 1/4 inch tube fitting size). Match more application scenarios and meet your needs
  • EASY TO INSTALL: Any 2 brake lines can be easily connected to the brake line adapter fittings. First, clean the surface of the brake pipe. Then, put nuts on each end of the two brake lines, and finally connect the two nuts with the brake line union connector fitting, and tighten it with a wrench to fix it
  • WIDELY APPLICATION - This kit commonly fits regular inverted flare/ double flare sizes for 1/4 inch brake line tubes. It can also be used for the fuel system and hydraulic brake system of a car, truck, or SUV
Bestseller No. 5
Ailbiuko 3/16" 1/4" Brake Line Repair Kit with 100Pcs Fittings & Tubing
  • VALUE PACK: This kit include: 1 x flaring tool kit;1 x 3/16" brake line; 1 x 1/4" brake line; 40 x 3/16" (3/8-24) Inverted Tube Nut; 6 x 3/16” (7/16-24) Inverted Tube Nut; 4 x 3/16” (1/2-20) Inverted Tube Nut; 4 x 3/16"(9/16-18) Inverted Tube Nut;4 x 3/16" (3/8-24) Inverted Tube Union;30 x 1/4”(7/16-24) Inverted Tube Nut; 4 x 1/4”(1/2-20) Inverted Tube Nut; 4 x 1/4”(9/16-18) Inverted Tube Nut; 4 x 1/4”(7/16-24) Inverted Tube Union.These fittings are all neatly placed in the box for easy access
  • SINGLE/DOUBLE FLARING TOOL: Our brake line flaring tool kit handles single and double flaring in materials such as brass, copper, aluminum, magnesium, and mild steel brake tubes, making them great for brake, fuel, and transmission lines, ensuring a secure and leak-free connection. The brake line flaring tool is suitable for 3/16", 1/4", 5/16", 3/8", and 1/2" metal tubing. Flaring tool kit comes with everything you need for cutting and flaring metal tubing(1x Flaring Bar,1x Tubing Cutter,1x Flaring Cone,5x Adapters,1x Tube Bender)
  • PREMIUM MATERIAL: Our brake line is made of high-quality copper plated with a unique surface treatment, providing superior corrosion resistance and flexibility compared to standard steel lines for long-term use
  • MULTIPLE SIZES: The unions and nuts have 4 sizes: 3/8-24 threads,7/16-24 threads, 1/2-20 threads, 9/16-18 threads (regular 3/16 & 1/4 inch tube fitting size). Match more application scenarios and meet your needs
  • EASY TO INSTALL: Any 2 brake lines can be easily connected to the brake line adapter fittings. First, clean the surface of the brake pipe. Then, put nuts on each end of the two brake lines, and finally connect the two nuts with the brake line union connector, and tighten it with a wrench to secure it. reaming tool with flat indenter, reinforced double-layer flap reaming, stronger flare

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...