March 1, 2024 NHTSA CAMPAIGN NUMBER: 24V173000
Air Bag Malfunction Warning Light Failure
A warning light that fails to indicate a problem with air bag deployment can increase the risk of injury during a crash.
NHTSA Campaign Number: 24V173
Manufacturer Faraday Future Eco Sales Co. LLC
Components AIR BAGS, ELECTRICAL SYSTEM
Potential Number of Units Affected 11
Summary
Faraday Future Eco Sales. LLC (FF) is recalling certain 2023 Faraday Future FF 91 2.0 Alliance vehicles. A software error may prevent the air bag malfunction warning light from illuminating when a system fault is detected in the Airbag Control Unit (ACU).
Remedy
FF will deploy an over-the-air (OTA) iHUB module software update, free of charge. Owner notification letters are expected to be mailed March 15, 2024. Owners may contact Faraday customer service at 1-800-228-7702. FF’s number for this recall is 24-90-32-01.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
PU-24-90-32-01
03/01/2024
Frequently Asked Questions (FAQs) for Safety Recall 24-90-32-01: Airbag Telltale Light May Not Illuminate in Case of a Malfunction.
Q1) Which vehicles are involved?
A1) Faraday Future has decided that a defect which relates to motor vehicle safety exists in certain 2023 model year FF 91 2.0 Alliance vehicles.
Q2) What is the issue or condition?
A2) A software issue exists in certain of these vehicles which would cause the Airbag Control Unit (ACU) communications fault to not illuminate the airbag malfunction indicator lamp. As a result, an ACU communications fault would not illuminate the airbag light to indicate a problem to the driver.
Q3) What symptoms may be experienced? What warning signs may be associated with the issue or condition described?
A3) Loss of communication with the ACU will not illuminate the Airbag telltale light. There will be no indication to the driver that there may be an issue with the airbag system.
Q4) What is the remedy/repair?
A4) FF will update the software in the vehicle’s iHUB module. The software update can also be performed remotely using wireless over-the-air technology (OTA).
Q5) What is the safety risk? Is the vehicle safe to drive?
A5) A driver might not be warned of an ACU loss of communication fault which might indicate a problem with airbag deployment. If airbags do not deploy appropriately in a crash, there is an increased risk of injury in that crash.
Q6) Does the owner have to pay for this remedy/repair?
A6) No, this inspection/repair will be done at no cost to the customer.
Q7) Is the remedy/repair available now?
A7) Yes, FF will notify affected vehicle owners that their vehicle is included in this recall and the repair is available.
Q8) What should owners do until recall repairs can be completed? Are there any special instructions? A8) If special instructions are provided, they will be included in the notification letters to customers.
Q9) How can owners check to see if their vehicle is involved in this recall action?
A9) FF will notify all owners who own a vehicle involved in this recall by mail, email and phone. Owners may also contact FF Service Support by calling 1-877-FF-HELPU (1-877-334-3578) or by email: [email protected]. Additionally, customers can visit NHTSA’s website at https://vinrcl.safercar.gov/vin/
Chronology :
On February 12th 2024, a design review of the Airbag Control Unit (ACU) and warning telltale issue was opened following validation testing feedback for a future SW release, where it was reported that conditions involving loss of communication with the ACU did not illuminate the airbag malfunction indicator telltale light.
On February 13th 2024, a Product Defect Safety Investigation (PDSI 2024-01) was initiated within the FF Product Safety Working Group (PSWG).
On February 26th 2024, the PSWG reviewed additional information and concluded that “Airbag Warning Telltale Not Illuminating” under the condition of loss of communication between the ACU and the iHUB is an “Unreasonable Risk to Safety”.
On February 27th 2024, the PSWG findings and recommendation were presented to the FF Product Safety Executive Council (PSEC). The PSEC, at this time, approved a voluntary recall for internal product defect safety investigation PDSI 2024-01 – “Airbag Warning Telltale”. FF is not aware of any accidents or injuries associated with this condition.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| FARADAY FUTURE | FF-91 ALLIANCE | 2023 |
3 Associated Documents
Recall Acknowledgement
RCAK-24V173-2906.pdf 732.584KB
PU-24-90-32-01 03/01/2024 Frequently Asked Questions (FAQs)
RMISC-24V173-0134.pdf 124.432KB
Defect Notice 573 Report
RCLRPT-24V173-8183.PDF 214.769KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by monitoring current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- [Diagnose Like a Pro] BlueDriver Pro Next-Gen is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission, and more on supported vehicles, including expanded coverage on newer model years.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Expanded Make & Model Coverage] Optimized for today’s vehicles with strong support for GM, Ford
, Stellantis (RAM
, Jeep
, Chrysler
), Toyota
, Honda
, Nissan
, Mazda
, Subaru
, Hyundai
, Mercedes-Benz
, BMW
, and VW
. Enhanced communication on select 2024+ Nissan
and Mazda
models (see compatibility chart). - [Gas Vehicles 1996+ & Select Light-Duty Trucks] Works with all gas-powered vehicles made in 1996 or newer, plus select light-duty trucks and diesels, including F-250, RAM
2500, Silverado, and Sierra. Built for daily drivers, family vehicles, and real-world truck use.
- PAID FOR ITSELF ON THE FIRST USE - SKIP MORE DIAGNOSIS FEE: One visit to a dealership just for diagnosis can easily c-ost 200 or more before any repair begins. The NT614 Elite foxwell scanner brings professional vehicle diagnostics right to your driveway. Unlike basic code readers that only read check engine lights, it scans 4 critical systems – Engine, ABS, SRS, and Transmission to pinpoint exactly where the problem is and why. Read and clear trouble codes and perform essential resets including ABS Bleeding, SAS Calibration, EPB Reset, Oil Reset, and Throttle Reset. Stop paying shops just to "take a look"
- UPGRADE OF NT604 - 5 ESSENTIAL RESET SERVICES, BRING 1000+ OF SHOP SERVICES HOME: Most 4-system car scanners stop at reading codes. The NT614 Elite obd2 scanner goes further by supporting 5 commonly used maintenance resets that repair shops often charge hundreds for: ABS Bleeding, EPB Reset, Oil Reset, SAS Calibration, Throttle Relearn. Just one brake service can offset the c-ost of the tool
- 15 SECONDS FAST DIAGNOSIS, SMART AUTOVIN, PLUG & PLAY: Simply plug into the OBD2 port, one click AUTOVIN, the code reader automatically retrieves your VIN and enters diagnostic mode in about 15 seconds. No complicated setup required. Instantly identify your vehicle and access the relevant systems. Whether you're a DIY car owner, beginner, or mechanic, you can quickly locate problems and make informed repair decisions. (NOTE: 1.A few cars need to manually enter the VIN. 2.Vehicles with CAN protocol support fast diagnosis in 15 seconds)
- PERFORM ABS BLEEDING AT HOME – RESTORE BRAKE PEDAL FEEL: After replacing brake pads, calipers, or brake fluid
, air can enter the brake system, causing a soft or sinking brake pedal and longer stopping distance. The NT614 Elite code reader for cars and trucks supports ABS Bleeding, helping remove trapped air from the brake lines and restore proper brake pressure. Maintain safer braking performance without a shop visit. (NOTE: A few cars don't support ABS Bleeding function, pls check it before purchase) - LIVE DATA GRAPHING + BUILT-IN DTC LIBRARY + LIFETIME WiFi UPDATES: Not sure what a fault code means or how your sensors are performing? The NT614 Elite scanner for car displays real-time live data (RPM, speed, O2 sensors, transmission temp, and more) in easy-to-read graphs, helping you quickly spot abnormal fluctuations. The built-in DTC library explains trouble codes directly on screen-no phone or internet search required. You can save diagnostic data and print reports for further analysis or sharing with your mechanic. Simply connect to WiFi for lifetime free updates, with no SD card required
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
Last update on 2026-06-13 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Faraday Future Eco Sales Co. LLC
DBA Faraday Future
501 W. 190th Street
Gardena, CA 90248
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-173
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Faraday Future Eco Sales Co. LLC MAR 01, 2024 NHTSA Recall No. : 24V-173 Manufacturer Recall No. : 24-90-32-01 Manufacturer Information :
Manufacturer Name : Faraday Future Eco Sales Co. LLC Address : 501 W 190th Street
Gardena CA 90248
Company phone : 800.228.7702
Population :
Number of potentially involved : 11 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2023-2023 Faraday Future FF 91 2.0 Alliance Vehicle Type : LIGHT VEHICLES Body Style : 4-DOOR Power Train : HYBRID
ELECTRIC
Descriptive Information : Faraday Future Eco Sales Co. LLC (Faraday Future) (FF) is recalling certain 2023 FF 91 2.0 Alliance vehicles. The iHUB module incorrectly processes a loss of communication with the Airbag Control Unit (ACU), causing the air bag malfunction indicator telltale light to not illuminate. All FF 91 2.0 Alliance Edition vehicles manufactured between 3/2023 and 12/2023, eleven (11) vehicles in total, are affected by this issue.
(
Production Dates : MAR 01, 2023 – DEC 01, 2023
VIN Range 1 : Begin : 7G090AMR6PH000001 End : 7G090AMR7PH000011 Not sequential VIN Range 2 : Begin : 7G090FMR6PH000349 End : 7G090FMR6PH000349 Not sequential Description of Defect :
Description of the Defect : Faraday Future has determined that a defect which relates to motor vehicle safety exists in certain 2023 model year FF 91 Alliance vehicles. A software issue exists in these vehicles which would cause the airbag malfunction indicator telltale light to not illuminate in the case of an Airbag Control Unit (ACU) communications fault. As a result, if there is a loss of communication or power to the ACU, the airbag telltale light would not illuminate to indicate a system fault to the driver.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : A driver will not be warned of an ACU loss of communication fault which
might indicate a problem with airbag deployment. If airbags do not deploy Part 573 Safety Recall Report 24V-173 Page 2 appropriately in a crash, there is an increased risk of injury to occupants in that crash.
Description of the Cause : The iHUB module software does not correctly indicate loss of communication with the ACU. Identification of Any Warning NR
that can Occur : Involved Components : Component Name 1 : iHub
Component Description : Information Gateway Component Part Number : P-02817591 Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR Chronology :
On February 12th 2024, a design review of the Airbag Control Unit (ACU) and warning telltale issue was opened following validation testing feedback for a future SW release, where it was reported that conditions involving loss of communication with the ACU did not illuminate the airbag malfunction indicator telltale light. On February 13th 2024, a Product Defect Safety Investigation (PDSI 2024-01) was initiated within the FF Product Safety Working Group (PSWG). On February 26th 2024, the PSWG reviewed additional information and concluded that “Airbag Warning Telltale Not Illuminating” under the condition of loss of communication between the ACU and the iHUB is an “Unreasonable Risk to Safety”. On February 27th 2024, the PSWG findings and recommendation were presented to the FF Product Safety Executive Council (PSEC). The PSEC, at this time, approved a voluntary recall for internal product defect safety investigation PDSI 2024-01 – “Airbag Warning Telltale”. FF is not aware of any accidents or injuries associated with this condition. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-173
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Remedy :
Description of Remedy Program : FF will update the software in the vehicle’s iHUB module. FF will schedule
concierge pick up, and redelivery, of the owners’ vehicles to have the updates performed at the FF Service Hub in Gardena, CA.. Alternatively, owners may have the opportunity to accept the software update using FF Over The Air (OTA) technology. Pursuant to 49 C.F.R. § 573.13(d)(1), all covered vehicles are under warranty, so reimbursement will not be offered. How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production : The revised/updated iHub module software will retrieve the data indicating loss of communication with the ACU which will ensure an ACU fault of this type will be correctly communicated to the customer.
Production release of affected vehicles was halted at FF’s Hanford California assembly plant on February 27, 2024. The FF Hanford plant will implement the corrected software when production of the affected models resumes, prior to their release. Recall Schedule :
Description of Recall Schedule : Currently, FF has not activated, and does not currently utilize a “third
party” sales and service network. All sales and service activities are performed at FF’s Los Angeles HQ. All internal sales and service personnel in FF Eco Sales Co. LLC have been notified of this recall. Customer notification is estimated to begin on March 15th 2024.
Planned Dealer Notification Date : MAR 01, 2024 – MAR 01, 2024
Planned Owner Notification Date : MAR 15, 2024 – MAR 20, 2024
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





