LED Backlight Circuit Board Failure May Cause Fire – 2024 Eveland’s Scamp Trailers

SEOCONTENT-START

206346 Range and Slide-in Deactivate Lights Instructions
PN: 206346
4-2-2024
WARNING
This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure they can use the appliance safely.
To prevent electrical shock and/or equipment damage, disconnect electrical power to the system at the main fuse or circuit breaker until installation is complete.
CAUTION
This electrical work must be performed by trained technicians only. Adhere to all local and national codes and ordinances. Take care when securing and routing wires so they do not short. Personal injury and/or property damage may occur.
This electrical work will disable the function of the red, white and oven lights.
1.
Disconnect 12VDC power to the range.
2.
Remove the range main top by firmly pulling up at the front. Lift the main top free of the burner box clips and set aside.
3.
Locate the red and black wires that connect to the coach wiring (Coach wiring color may vary). Cut this wire directly behind the connector using a pair of electrical cutters.
4.
Crimp the Crimp Caps(233759) to incoming 12V positive and negative to prevent lights from being reattached.
5.
Locate and unplug the wires from the light switch on the front of the unit, Then remove the light switch by squeezing the locking tabs and replace with the plug provided in the kit (233754).
6.
Replace the main top by engaging rear clips and pressing firmly on the front latch.
7.
Close the glass cover (if equipped).
8.
Reconnect 12VDC power.
Service
For any questions, please reach out to the Suburban service department using the contact information below.
Suburban, An Airxcel Brand
Service Department
676 Broadway Street
Dayton, TN 37321
(574) 247-9235 Option 5

**************************************************************************************************************

OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-430
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Eveland’s Inc. JUN 17, 2024 NHTSA Recall No. : 24V-430 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Eveland’s Inc.
Address : 507 State 371 NW
Backus MN 56435 Company phone : 218-947-4932
Population :
Number of potentially involved : 68 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2024-2024 Scamp Trailer Scamp Trailer Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : Suburban Manufacturing has decided that a defect which relates to motor vehicle safety exists in Slide-In Range Models that contain Red LED Backlit Knobs that were installed in recreationl vehicles.
Production Dates : OCT 01, 2023 – JUN 11, 2024
VIN Range 1 : Begin : 1S71B1615RB001750 End : 1S71BR31XRB002170 Not sequential Description of Defect :
Description of the Defect : Suburban Manufacturing has decided that a defect which relates to motor vehicle safety exists in Slide-In Range Models that contain Red LED Backlit Knobs that were installed in recreationl vehicles. The LED backlight printed circuit boards (PCB) are not fully coated. The lack of conformal coating in the connection passages between the layers of the PCB can allow liquid from the cooktop surface to accumulate which could result in a short circuit resulting in the failure of the PCB.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : If the PCB fails, it can become overheated, and the polyethylene cover of the lights can melt and possibly ignite causing a fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR Part 573 Safety Recall Report 24V-430 Page 2 Involved Components : Component Name 1 : Suburban Oven
Component Description : Suburban Oven Back Lit Knobs Component Part Number : 3629A Supplier Identification : Component Manufacturer
Name : Suburban Manufacturing Address : 676 Broadway St.
Dayton Tennessee 37321
Country : United States Chronology :
Suburban Manufacturing has decided that a defect which relates to motor vehicle safety exists in Slide-In Range Models that contain Red LED Backlit Knobs that were installed in recreational vehicles. The LED backlight printed circuit boards (PCB) are not fully coated. The lack of conformal coating in the connection passages between the layers of the PCB can allow liquid from the cooktop surface to accumulate which could result in a short circuit resulting in the failure of the PCB. Description of Remedy :
Description of Remedy Program : Suburban has provided work instructions to remedy the process to
deactivate the LED backlights of the knobs and to properly terminate the electrical connections. Suburban will provide this remedy at no cost to owners. With proper documentation, Suburban will reimburse owners per its general reimbursement policy if their range was remided prior to the issuing of this recall. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : There is no remedy component. Power is disconnect to the knobs, resolving the issue.
When Suburban issued the recall letter to Scamp Trailers, we checked all ovens before installation. Disconnecting the power to the knobs was done. Recall Schedule : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-430
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Recall Schedule : We are the manufacturer of the Scamp Trailers. There are no dealers.
We sent out an email to all customers that had a Suburban Oven installed on May 6th.
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : JUN 17, 2024 – AUG 10, 2024
* NR – Not Reported

**************************************************************************************************************

OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-430
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Eveland’s Inc. JUN 17, 2024 NHTSA Recall No. : 24V-430 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Eveland’s Inc.
Address : 507 State 371 NW
Backus MN 56435 Company phone : 218-947-4932
Population :
Number of potentially involved : 68 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2024-2024 Scamp Trailer Scamp Trailer Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : Suburban Manufacturing has decided that a defect which relates to motor vehicle safety exists in Slide-In Range Models that contain Red LED Backlit Knobs that were installed in recreationl vehicles.
Production Dates : OCT 01, 2023 – JUN 11, 2024
VIN Range 1 : Begin : 1S71B1615RB001750 End : 1S71BR31XRB002170 Not sequential Description of Defect :
Description of the Defect : Suburban Manufacturing has decided that a defect which relates to motor vehicle safety exists in Slide-In Range Models that contain Red LED Backlit Knobs that were installed in recreationl vehicles. The LED backlight printed circuit boards (PCB) are not fully coated. The lack of conformal coating in the connection passages between the layers of the PCB can allow liquid from the cooktop surface to accumulate which could result in a short circuit resulting in the failure of the PCB.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : If the PCB fails, it can become overheated, and the polyethylene cover of the lights can melt and possibly ignite causing a fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR Part 573 Safety Recall Report 24V-430 Page 2 Involved Components : Component Name 1 : Suburban Oven
Component Description : Suburban Oven Back Lit Knobs Component Part Number : 3629A Supplier Identification : Component Manufacturer
Name : Suburban Manufacturing Address : 676 Broadway St.
Dayton Tennessee 37321
Country : United States Chronology :
Suburban Manufacturing has decided that a defect which relates to motor vehicle safety exists in Slide-In Range Models that contain Red LED Backlit Knobs that were installed in recreational vehicles. The LED backlight printed circuit boards (PCB) are not fully coated. The lack of conformal coating in the connection passages between the layers of the PCB can allow liquid from the cooktop surface to accumulate which could result in a short circuit resulting in the failure of the PCB. Description of Remedy :
Description of Remedy Program : Suburban has provided work instructions to remedy the process to
deactivate the LED backlights of the knobs and to properly terminate the electrical connections. Suburban will provide this remedy at no cost to owners. With proper documentation, Suburban will reimburse owners per its general reimbursement policy if their range was remided prior to the issuing of this recall. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : There is no remedy component. Power is disconnect to the knobs, resolving the issue.
When Suburban issued the recall letter to Scamp Trailers, we checked all ovens before installation. Disconnecting the power to the knobs was done. Recall Schedule : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-430
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Recall Schedule : We are the manufacturer of the Scamp Trailers. There are no dealers.
We sent out an email to all customers that had a Suburban Oven installed on May 6th.
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : JUN 17, 2024 – AUG 17, 2024
* NR – Not Reported

**************************************************************************************************************

OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-430
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Eveland’s Inc. JUN 11, 2024 NHTSA Recall No. : 24V-430 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Eveland’s Inc.
Address : 507 State 371 NW
Backus MN 56435 Company phone : 218-947-4932
Population :
Number of potentially involved : 68 Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2024-2024 Scamp Trailer Scamp Trailer Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : Suburban Manufacturing has decided that a defect which relates to motor vehicle safety exists in Slide-In Range Models that contain Red LED Backlit Knobs that were installed in recreationl vehicles.
Production Dates : OCT 01, 2023 – JUN 11, 2024
VIN Range 1 : Begin : 1S71B1615RB001750 End : 1S71BR31XRB002170 Not sequential Description of Defect :
Description of the Defect : Suburban Manufacturing has decided that a defect which relates to motor vehicle safety exists in Slide-In Range Models that contain Red LED Backlit Knobs that were installed in recreationl vehicles. The LED backlight printed circuit boards (PCB) are not fully coated. The lack of conformal coating in the connection passages between the layers of the PCB can allow liquid from the cooktop surface to accumulate which could result in a short circuit resulting in the failure of the PCB.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : If the PCB fails, it can become overheated, and the polyethylene cover of the lights can melt and possibly ignite causing a fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR Part 573 Safety Recall Report 24V-430
Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Involved Components : Component Name 1 : NR Component Description : NR Component Part Number : NR
Supplier Identification : Component Manufacturer
Name : Suburban Manufacturing Address : 676 Broadway St.
Dayton Tennessee 37321
Country : United States
Chronology :
NR
Description of Remedy :
Description of Remedy Program : NR How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported

**************************************************************************************************************

**************************************************************************************************************

SEOCONTENT-END