May 2, 2019 NHTSA CAMPAIGN NUMBER: 19V341000
A broken front brake lever
can affect front braking ability, increasing the risk of crash.
NHTSA Campaign Number: 19V341
Manufacturer Yamaha
Motor Corporation, USA
Components SERVICE BRAKES
Potential Number of Units Affected 198
Summary
Yamaha
Motor Corporation, USA (Yamaha
) is recalling certain 2019 YZFR3 motorcycles. Porosities in the front brake lever
may cause it to break if it is gripped with a strong force.
Remedy
Yamaha
will notify owners, and dealers will inspect and replace the front brake lever
, as necessary, free of charge. The recall began May 15, 2019. Owners may contact Yamaha
customer service at 1-800-962-7926. Yamaha
’s number for this recall is 990128.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| MOTORCYCLE | 5/15/2019 | M2019-002R |
CERTAIN 2019 YZFR3K (“YZF-R3”) AND YZFR3AK (“YZF-R3 ABS”) MODELS FACTORY MODIFICATION CAMPAIGN – Front Brake Lever
| INTRODUCTION |
Yamaha
Motor Corporation, U.S.A. has decided that a defect which relates to motor vehicle safety exists in certain 2019 YZFR3K (“YZF-R3”) and YZFR3AK (“YZF-R3 ABS”) motorcycles. In affected units, there is the potential for the front brake lever
to have been manufactured with porosities in the material. Porosities in the material could allow the lever to break while applying a strong gripping force. A broken lever could cause sudden loss of front braking ability and a crash with injury or death.
To correct this defect, Yamaha
is initiating a Factory Modification Campaign. Affected units must have the brake lever
(Lever 2) inspected and, if found to have an affected manufacturing code as described in this bulletin, replaced with a new one that was manufactured correctly.
Yamaha
is notifying all registered owners of affected motorcycles by US mail. A copy of this letter is included in this bulletin. The customer should take this letter along with the affected motorcycle to an authorized Yamaha
dealer for modification.
If your dealership was invoiced for one or more affected units, a computer report listing all affected motorcycles invoiced to your dealership is mailed with this bulletin. Use the list to help ensure all affected motorcycles are modified. All sold motorcycles that have been registered with Yamaha
will show the customer’s name and address.
You must inspect and, if necessary, modify all affected motorcycles in your inventory as well as all customer owned motorcycles brought to you for this service. If you purchase a motorcycle from another dealer or Yamaha
, check to see if the procedures in this bulletin have already been performed before you sell the motorcycle.
Motorcycles that are affected should not be operated until they are modified. It is a violation of Yamaha
policy for your dealership to deliver any affected motorcycle to customers until the procedures in this bulletin are performed.
When the modification on each motorcycle is performed, follow the Warranty Information section of this bulletin to receive reimbursement. Be sure to use the Factory Modification Campaign procedures in Chapter 7 of the Warranty and Y.E.S. Handbook (LIT-11760-00-16).
DEALER ACTION SUMMARY
| Unsold & Sold Units: | Use YDS Unit Status to check to be sure the unit is affected and that it is not already modified, and then inspect the stamped manufacturing code on the underside of the brake lever |
| Parts: | Yes, but only if inspection shows that the brake lever |
| Warranty: | Factory Modification Campaign. See the Warranty Information section of this bulletin. This modification applies to all affected units regardless of ownership or warranty status. |
| Notify Customers: | Yes, you must immediately contact any customer if a motorcycle shows as unregistered on the enclosed report. Yamaha |
AFFECTED RANGE
| Model | Model Code | Primary ID | ||||
| Prefix | From | To | ||||
| 2019 YZF-R3 | B8P1 | RH17Y | 0002641 | 0002720 | ||
| 2019 YZF-R3A | B5L2 | RH18Y | 0002241 | 0002440 | ||
SERVICE PROCEDURES
Inspection
Inspect the stamped manufacturing code on the underside of the front brake lever
. If the brake lever
has stamping code K3 9A 16 or K4 9A 16 (shown), replace it with a new one.
Important:
If an affected motorcycle has the accessory Yamaha
R3 Brake Lever
(1 WD-H39A0-V0-00) or another aftermarket brake lever
, confirm whether or not your dealership or the customer retained the stock brake lever
. If so, inspect it according to these bulletin instructions.
Replacement
If the lever has stamped code K3 9A 16 or K4 9A 16, refer to the Service Manual (YZFR3K: LIT-11616-28-57 or YZFR3AK: LIT-11616-30-55) to replace the front brake lever
(Lever 2). Discard or recycle the brake lever
so it cannot be accidentally reused.
IDENTIFICATION PROCEDURE
After inspecting or inspecting and modifying a unit, make sure to properly record and submit the special warranty claim for this safety recall to ensure correct reimbursement and to update the units repair history in Yamaha
’s database.
PARTS INFORMATION
Order a replacement brake lever
for each affected unit if that has an affected manufacturing code on the original lever.
| Part Number | Kit Part Name | Dealer Cost | |||
| IWD-H3922-OO-OO | LEVER 2 (BRAKE LEVER | $11 .52 | |||
WARRANTY INFORMATION
The owner of each registered motorcycle will receive a letter announcing this campaign. The customer’s letter includes the unit’s VIN and Recall Number.
The inspection and, if necessary, modification is authorized for all affected motorcycles, both sold and unsold, regardless of ownership or warranty status. You do not need the customer’s letter to perform the inspection/ modification or to file for reimbursement.
Submit a Recall Claim as described below using Campaign Number 990128 and choose either Inspected or Modified. The labor allowance is 0.2 hour for either inspection or inspection and modification.
YDS:
To submit your Recall Claim in the warranty system on YDS, go to Service > Warranty Claims /Authorization > Claims / Authorization > New > Warranty Claim. Then, from the menu, select Recall / Service per Bulletin Claim.
If you have any questions about proper procedures for Factory Modification Campaigns, see Chapter 7 in your Warranty and Y.E.S. Handbook (LIT-11760-00-16).
IMPORTANT SAFETY RECALL NOTICE
This notice applies to your vehicle, VIN Model:
May 15, 2019
990128
Dear Yamaha
Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Yamaha
Motor Corporation, U.S.A. has decided that a defect which relates to motor vehicle safety exists in certain 2019 YZFR3K (“YZF‐R3”) and YZFR3AK (“YZF‐R3 ABS”) motorcycles. Our records indicate that you own the affected motorcycle shown above.
| The reason for this recall: | In affected motorcycles, there is the potential for the front brake lever |
| What Yamaha | To correct this defect, your authorized Yamaha |
| What you should do now: | Please call your Yamaha Only ride your motorcycle to the dealership to be repaired. You should avoid riding your affected motorcycle shown above whenever possible until you can get it to the dealer to have this modification performed. If you are unable to return to the Yamaha If your affected motorcycle has the accessory Yamaha If you have had this repair performed before you received this letter, you may be entitled to receive reimbursement for the cost of obtaining a pre‐notification remedy of the problem associated with this repair. For more information, contact Yamaha Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within 10 days. |
| If you need help: | If, after contacting your dealership, you have questions or concerns which the dealership is unable to answer, please write to: Yamaha Customer Relations Department Or call: 1‐800‐962‐7926 If, after contacting Yamaha |
| If you no longer own this Yamaha | If you have sold your motorcycle to another party, please call us toll‐free at 1‐800‐962‐7926 with the name and address of the new owner, along with the serial number shown above your name on the address label above. |
We’re sorry to cause you any inconvenience, but we are sincerely concerned about your safety and continued satisfaction with our products. Thank you for giving your attention to this important matter.
Sincerely,
Service Support Group
Yamaha
Motor Corporation, U.S.A.
1 Affected Product
Vehicle
| YAMAHA | YZFR3 | 2019 |
8 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-19V341-9617.pdf 157.881KB
Recall Acknowledgement
RCAK-19V341-5517.pdf 246.309KB
Miscellaneous Document – Defect Information Report
RMISC-19V341-5161.pdf 286.954KB
Defect Notice 573 Report
RCLRPT-19V341-5656.PDF 214.446KB
Remedy Instructions and TSB
RCRIT-19V341-0988.pdf 974.527KB
Recall Quarterly Report #3, 2019-4
RCLQRT-19V341-4582.PDF 211.318KB
Recall Quarterly Report #1, 2019-2
RCLQRT-19V341-3750.PDF 211.135KB
Recall Quarterly Report #2, 2019-3
RCLQRT-19V341-5130.PDF 211.23KB
Latest Recalls Documents
- IMPORTANT NOTE - Please check "vehicle fitment list" or description to make sure this model and year work for your bike before ordering.The motorcycle levers for for CB500F CB500X CBR500R 22-25, CMX 300 500 Rebel 17-24, Fury VT1300 Shadow 750 09-19, VTX1300 03-08, CBR 600 F2 F3 F4 F4i 91-06
- UNIQUE DESIGN - MZS Clutch Brake CBR500R Levers use modern CNC and laser techniques which ensure a long life of the product and a good visibility of the laser graved logo, shape and design of the lever follow ergonomic viewpoints
- ADJUSTABLE REACH - By simply adjusting a setscrew on the MZS brake clutch CMX 300 lever, the reach can be adjusted to accommodate the smallest to the largest hands and gives the best clutch or brake response
- UNBREAKABLE - The beautiful shiny finish with anodized treatment CNC short lever improves corrosion resistance and hardness, and prevents bending and damage at the time of crash. And it is covered with the skidproof stripe which can enhance the touch feel and friction, not easy to slip on
- PREMIUM MATERIAL - MZS Motorcycle Rebel 500 levers use chrome steel precision sealed bearings, stainless steel pivot and bushing parts, chrome slicon cantilever springs, CNC billet 6061 aluminum and chromoly fasteners
- IMPORTANT NOTE - Please check "vehicle fitment list" or description to make sure this model and year work for your bike before ordering. Be sure to strictly follow the installation instructions to check and test before riding, recommended that professionals install
- UNIQUE DESIGN - MZS Clutch Brake Levers use modern CNC and laser techniques which ensure a long life of the product and a good visibility of the laser graved logo, shape and design of the lever follow ergonomic viewpoints
- ADJUSTABLE REACH - By simply adjusting a setscrew on the MZS brake clutch lever, the reach can be adjusted to accommodate the smallest to the largest hands and gives the best clutch or brake response
- UNBREAKABLE - The beautiful shiny finish with anodized treatment CNC short lever improves corrosion resistance and hardness, and prevents bending and damage at the time of crash. And it is covered with the skidproof stripe which can enhance the touch feel and friction, not easy to slip on
- PREMIUM MATERIAL - MZS Motorcycle levers use chrome steel precision sealed bearings, stainless steel pivot and bushing parts, chrome slicon cantilever springs, CNC billet 6061 aluminum and chromoly fasteners
- 【Fitment Modles】Hond* CRF50 CRF70 CRF80 CRF100 CRF150 XR50 XR80 XR100 XR100R xr200r ATC 200m Pit Bike.
- 【Fitment Modles】Massimo MB200,Baja Mini
Bike MB165 & MB200 (Baja Heat, Mini
Baja, Baja Warrior). - 【Size】 Overall Length : 166 mm/ 6.54 inch, Overall Width : 46 mm/ 1.81 inch, Overall height : 75 mm/ 2.95 inch, Mounting holes : 22 mm/ 0.87 inch.
- 【Package Contents:】1 x lfet Clutch Brake Lever
, 1 x Right Brake Lever
, 1 x Wrench, 3 x Tie. - 【Note】Please check your Bike handle bar diameter is 7/8 inch before purchase.. Or leave us messages for assistance if you are not sure about the fitment.
- IMPORTANT NOTE - Please check "vehicle fitment list" or description to make sure this model and year work for your bike before ordering. Be sure to strictly follow the installation instructions to check and test before riding, recommended that professionals install (Not for 2022 UP+ CBR500R CB500X CB500F)
- UNIQUE DESIGN - MZS Clutch Brake Levers use modern CNC and laser techniques which ensure a long life of the product and a good visibility of the laser graved logo, shape and design of the lever follow ergonomic viewpoints
- ADJUSTABLE REACH - By simply adjusting a setscrew on the MZS brake clutch lever, the reach can be adjusted to accommodate the smallest to the largest hands and gives the best clutch or brake response
- UNBREAKABLE - The beautiful shiny finish with anodized treatment CNC short lever improves corrosion resistance and hardness, and prevents bending and damage at the time of crash. And it is covered with the skidproof stripe which can enhance the touch feel and friction, not easy to slip on
- PREMIUM MATERIAL - MZS Motorcycle levers use chrome steel precision sealed bearings, stainless steel pivot and bushing parts, chrome slicon cantilever springs, CNC billet 6061 aluminum and chromoly fasteners
- Designed for standard 7/8-inch (22mm) handlebars commonly used on pit bikes, dirt bikes and mini
bikes. - Fits many CRF50, CRF70, CRF80, CRF100, CRF150, XR50, XR80 and XR100 models. Please compare your original lever perch before ordering.
- Includes both clutch and brake lever
perch assemblies for replacing worn, bent or damaged controls. - Also suitable for many ATC 200M, Baja, MB200 and similar 22mm handlebar applications.
- Confirm the 22mm handlebar diameter, cable-end style and mounting configuration with your original parts before purchase.
This product presentation was made with AAWP plugin.




