May 7, 2019 NHTSA CAMPAIGN NUMBER: 19V346000
Disengaged/Uninstalled Axle Nut Locking Tab
A wheel detachment increases the risk of crash.
NHTSA Campaign Number: 19V346
Manufacturer Hercules Enterprises
Components SUSPENSION
Potential Number of Units Affected 160
Summary
Hercules Enterprises is recalling certain 2018 Hercules CH40GN 18047 trailers. The wheel end nut locking device on these trailers may not be properly installed, allowing the wheel end to separate from the axle.
Remedy
According to Hercules Enterprises, all of the affected axles have been repaired. The recall began September 6, 2018. Owners may contact Hercules Enterprises customer service at 1-908-369-0000.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NHTSA is missing critical, required information for this safety recall. This information must be supplied through the NHTSA Recalls Portal within 5 working days of confirming its accuracy:
– The percentage of products estimated to contain the defect or noncompliance (49 CFR 573.6 (c)(4)).
– A statement that the defect or noncompliance can cause a vehicle crash without prior warning; or a description of whatever prior warning may occur, and a statement that if this warning is not heeded, a vehicle crash can occur (49 CFR 577.5 (f)(1)).
– A description of the manufacturer’s program for remedying the defect or noncompliance (49 CFR 573.6 (c)(8)(i)).
September 6, 2018
Dave Esposito
Director of Corporate M&R
Direct Chassis Link Inc.
Subject: Recall Notice
Dear Dave,
Hercules Enterprises have been notified by AXN (notification letter attached) about possible error of the Stemco Pro Torq spindle nut installation on axles which was used on recent DCLI chassis production. Attaching possibly affected chassis unit numbers and VIN numbers. We are obligated to advise you that selling or leasing these chassis with potentially affected axles before they have been inspected, cleared, and remedied if necessary, could be a violation of federal law.
Sincerely,
Simas Baliukonis
Engineer
Hercules Enterprises
Phone: 908-369-000
Fax: 908-369-0626
E-mail: [email protected]
September 5, 2018
Simas Baliukonis
Engineer
Hercules Enterprises
Dear Simas,
AXN Heavy Duty has determined that we have had a possible error in the installation of the Stemco “Pro Torq” spindle nut on axles that where assembled for Hercules between January 1, 2018 and July 28, 2018. As such, this letter serves as a safety inspection and/or recall notice for the axles described below.
The potential defect is that the locking tab was either not installed or not fully engaged in the locking mechanism of the spindle nut. This error could result in a possible wheel off occurrence. We are providing Hercules Enterprises with the list of axle serial numbers that we believe could be affected. We are asking Hercules Enterprises to locate and examine internally or to locate the end customer and have the “Pro Torq” nut inspected to ensure proper installation. We have attached the procedures to be followed and ask that inspection sheets that we have provided be completed and a copy returned to AXN. AXN Heavy Duty will assume the financial responsibility to have the scope of axles inspected and corrected where necessary.
We are obligated to advise you that selling or leasing trailers with the potentially affected axles before they have been inspected, cleared, and remedied if necessary, could be a violation of federal law. Again, we apologize for the need to have these inspected.
If you have any questions or need further guidance please contact me at 214-385-6988 or [email protected] .
Sincerely
John R. Logan
John R. Logan
Vice President of Sales
AXN Heavy Duty
5534 National Turnpike
Louisville, KY 40214
1 Affected Product
Vehicle
| HERCULES ENTERPRISES | CONTAINER CHASSIS | 2018 |
6 Associated Documents
Defect Notice 573 Report
RCLRPT-19V346-9604.PDF 212.139KB
Recall Acknowledgement
RCAK-19V346-7148.pdf 245.032KB
Recall 573 Report- Amendment 1
RCLRPT-19V346-2591.PDF 212.523KB
Recall Quarterly Report #1, 2018-3
RCLQRT-19V346-9593.PDF 211.126KB
Owner Notification Letter(Part 577)
RCONL-19V346-3309.pdf 50.202KB
Miscellaneous Document- Owner Notification
RMISC-19V346-5234.pdf 200.769KB
Latest Recalls Documents
- Lubrimatic 11-316 1 Lb Multi-Purpose Grease
- Long lasting, hard working formula delivers high performance in a wide range of heavy-duty applications
- Recommended for chassis, universal joints and other general purpose applications around the home, farm or shop
- Works best for lubricating rolling parts
- Nlgi 1-1/2; Drop point 350 degrees F; pumps to -10 to -15 degrees F
- AFFORDABLE SOLUTIONS
- Water resistant
- Rust and oxidation inhibitors
- Long storage life
- Fit type: Universal;Fit Type: Universal
- Long storage life
- Agricultural, automotive and industrial applications
- Water resistant
- Versatile Use: Super Lube Multi-Purpose Synthetic Grease with Syncolon is perfect as a tool grease, automotive grease, gear grease, and bearing grease for workshop or home use
- High Temperature Grease: This synthetic multipurpose lubricant resists water, salt water, dirt, and corrosion, making it ideal harsh environments
- Safe for Food & Sensitive Applications: As an NSF H1 registered food-grade lubricant, Super Lube is perfect for food processing equipment and is Kosher certified
- Maintains Stability Under Pressure: With a non-melting grease formula, Super Lube stays put without running, dripping, separating, or forming gummy deposits
- Premium Synthetic Lubricants: Super Lube manufactures specialized, effective, and regulatory-compliant lubrication solutions for industrial and mechanical settings
- HEAVY DUTY RED GREASE: AtomLube Ultra Heavy Duty Red Grease (NLGI #2) is a multi-purpose high-performance lubricant designed for extended chemomechanical durability. This essential chassis bearing grease has outstanding extreme-pressure lubrication and wear protection. Includes a 2-pack of 14 oz. tubes.
- HIGH-PERFORMANCE LUBRICANT: This powerful, waterproof grease eliminates friction and corrosion. AtomLube Heavy Duty Red Grease develops strong adhesion to metal surfaces for strong stay-in-place power even in severe operating conditions.
- LONGER LUBRICATION INTERVALS: This heavy duty red grease has a high resistance to oxidation and washout to guarantee extended service life and longer lubrication intervals. It provides lasting protection during periods of extreme pressures and high temperatures.
- PROLONGS EQUIPMENT LIFE: Our nano-engineered red grease penetrates complex machine surfaces to protect equipment mechanisms, extend service intervals, and prolong useful life of equipment.
- NLGI CERTIFIED: Ultra Heavy Duty Red Grease meets the National Lubricating Grease Institute (NLGI) performance classification GC-LB for automotive applications in wheel bearing and chassis grease.
This product presentation was made with AAWP plugin.