NHTSA ID Number: 10161690
Manufacturer Communication Number: CK19-16
Summary
ISRI SEAT BELT WITH SENSOR INSTALLATION (ACCESSORY KIT 23687694)
3 Affected Products
Vehicle
DESCRIPTION
On the vehicles affected by this bulletin, a new seat belt buckle with warning sensor (telltale/buzzer) must be installed on the driver’s seat following the instruction below. Accessory Kit # 23687694 must be run to activate the system at the end of the procedure.
SEOCONTENT-START
Conversion Kit CK19-16
Writer: MG
Date Expiration Revision Page
06.2019 N/A 0 1(17)
First Release
06-03-2019
ISRI SEAT BELT WITH SENSOR INSTALLATION (ACCESSORY KIT 23687694)
Prevost
/ Volvo Vehicles
DESCRIPTION
On the vehicles affected by this bulletin, a new seat belt buckle with warning sensor (telltale/buzzer) must be installed on the driver’s seat following the instruction below. Accessory Kit # 23687694 must be run to activate the system at the end of the procedure.
MODEL YEAR(S) AND VEHICLES INVOLVED
Model
VIN
H3-45 coaches
Model Year : 2017 – 2019
2PCH33490HC713599, 2PCH33493HC713600, 2PCH33497HC713602, 2PCH33490HC713604, 2PCH33494HC713606, 2PCH33498HC713608, 2PCH3349XHC713626, 2PCH33493HC713628, 2PCH33495HC713629, 2PCH33497HC713826, 2PCH33497HC713843, 2PCH33490HC713859, 2PCH33496HC713865, 2PCH33494JC713899, 2PCH33496JC713905, 2PCH33497JC713928, 2PCH33499JC713932, 2PCH33494JC713952, 2PCH33492JC713965, 2PCH33495JC713992, 2PCH33491JC710006,
2PCH33490JC710031, 2PCH33494JC710078, 2PCH33491KC710282, 2PCH33490KC710290, 2PCH33495KC710320, 2PCH33490KC710323, 2PCH33495KC710348, 2PCH33498KC710375, 2PCH33498KC710389, 2PCH33490KC710399, 2PCH33492KC710419, 2PCH33491KC710430, 2PCH33492KC710467, 2PCH33497KC710478
MATERIAL NEEDED
Order the following parts:
Part No.
Description
Qty
860332
SEAT BELT ASS W/SENSOR
1
562548
TERMINAL, MOLEX .093 SOCKET 20-14AWG
2
562549
CONNECTOR, MOLEX .093 2 SH
1
Equipment that may be required:
Part No.
Description
Qty
Laptop with PTT (Premium TechTool, latest version installed) & related cables.
1
NOTE
Material can be obtained through regular channels.
Conversion Kit CK19-16
Revision Page
0 2(17)
Writer: MG <QF7720961 rev8>
PROCEDURE
DANGER
Park vehicle safely, apply parking brake, stop engine. Prior to working on the vehicle, set the ignition switch to the OFF position and trip the main circuit breakers equipped with a trip button. On Commuter type vehicles, set the battery master switch (master cut-out) to the OFF position.
Lock out & Tag out (LOTO) must be performed during set-up, maintenance or repair activities. Refer to your local procedure for detailed information regarding the control of hazardous energy.
1. Remove seat base (cushion) from the seat.
– Lift-up center lever and slide seat base (cushion) to the foremost position.
– Remove handle from seat base (remove two mounting screws).
– Hold center lever in upper position and push it sideward (left) to disengage it.
– Make sure the seat base is at its full forward position and lift it up to free it from the seat.
Conversion Kit CK19-16
Revision Page
0 3(17)
Writer: MG <QF7720961 rev8>
2. Remove seat belt from the seat.
– Unscrew the belt lower mount Torx screw (lift the backrest adjustment lever to uncover the screw).
– Remove both seat armrests.
– Disengage J hooks and cut the cable ties holding together the lower edges of the backrest seat cover.
Conversion Kit CK19-16
Revision Page
0 4(17)
Writer: MG <QF7720961 rev8>
– Remove the backrest seat cover (unhook the side and center Velcro’s).
– Pass the belt and belt buckle through the seat cover opening.
– Unscrew the belt upper mount (special Torx screw with shoulder).
– Remove the cardboard covering at the back of the seat backrest and pass the belt and buckle through the seat opening.
Conversion Kit CK19-16
Revision Page
0 5(17)
Writer: MG <QF7720961 rev8>
– Remove the belt mechanism plastic cover at the back of the seat (remove the 4 trim clips by pushing out the center pin).
– Disengage the sliding rail clip at the back of the seat to free the belt from the rail (press one of the pin and slide clip up or down).
– Unscrew the seat belt mechanism from the back of the seat (Torx screw).
Conversion Kit CK19-16
Revision Page
0 6(17)
Writer: MG <QF7720961 rev8>
3. Remove seat buckle from the seat base.
– Unscrew the buckle dust cover (a small # 6 Torx screwdriver is required).
– Detach the side plastic cover to access the buckle hold down Torx screw.
– Remove the buckle and dust cover.
Conversion Kit CK19-16
Revision Page
0 7(17)
Writer: MG <QF7720961 rev8>
4. Install new seat buckle.
– Pass the buckle end and harness through the dust cover (it is not be possible to install the dust cover with the buckle already secured to the seat).
– Pass the new buckle harness through the air supply line opening at the back of the seat.
– Secure the new buckle to the seat using one of the new supplied Torx screw (make sure the locating pin is engaged). Apply medium strength (blue) thread locker to the screw threads TORQUE: 35 Nm (26 lb-ft).
– Reattach the side plastic cover and re-install the dust cover.
Conversion Kit CK19-16
Revision Page
0 8(17)
Writer: MG <QF7720961 rev8>
5. Install new seat belt and mechanism.
– Secure the new belt mechanism to the base of the seat (Apply medium strength (blue) thread locker to the screw threads but hand tight only, use new supplied Torx screw).
NOTE
The new seat belt mechanism does not have a locating tab.
– Position the belt in the sliding rail and reinstall the rail clip.
– Pass the belt end and belt buckle through seat and seat cover opening.
– Secure the top part of the belt at the opening in the backrest. Use the supplied special Torx screw with shoulder. Apply medium strength (blue) thread locker to the screw threads. TORQUE: 35 Nm (26 lb-ft).
– Secure the lower part of the belt to the seat (behind the adjustment lever). Center the belt end in the cover opening and tighten. Apply medium strength (blue) thread locker to the screw threads TORQUE: 35 Nm (26 lb-ft).
Conversion Kit CK19-16
Revision Page
0 9(17)
Writer: MG <QF7720961 rev8>
– Make sure that the belt is centered in the top part of the sliding rail and that there is no belt to rail contact at the lower part of the rail. Adjust the angle of the seat belt mechanism as required.
Conversion Kit CK19-16
Revision Page
0 10(17)
Writer: MG <QF7720961 rev8>
– When correctly positioned, tighten the belt mechanism Torx hold down screw to its final torque 35 Nm (26 lb-ft).
– Re-install the cardboard at the back of the seat (use masking tape to hold in place).
– Slide back the seat cover over the backrest, hook the side and center Velcro’s.
– Secure the seat cover at the bottom of the backrest using cable ties. Re-attach J-hooks on both sides.
– Re-install both armrests. Apply medium strength (blue) thread locker to the screw threads TORQUE: 22 Nm (16 lb-ft).
– Make sure the belt is operating properly (moving & retracting freely). Adjust the mechanism angle as required to ensure proper operation and reinstall the belt mechanism cover.
Conversion Kit CK19-16
Revision Page
0 11(17)
Writer: MG <QF7720961 rev8>
6. Connect the buckle harness to the vehicle (vehicles with connector under the seat).
NOTE
Some vehicle may already be equipped with a belt buckle connector located under the seat base.
If present, the connector will be coming from the vehicle front compartment (air supply hole in the floor under the seat).The connector is sometime secured to the seat base frame as shown.
A jumper wire is connected to the end of it to simulate a fastened belt and prevent the illumination of the dashboard belt telltale light.
– Locate the belt buckle connector under the seat (typical location shown, actual location may vary).
– Disconnect the jumper wire at the end of the connector.
– Cut the end of the new belt buckle harness previously installed and shorten harness to the required length.
– Splice the ends of both buckle harness wire and crimp the two supplied 562548 terminals.
– Insert the terminals in the supplied 562549 connector.
– Connect the belt buckle harness to the connector under the seat.
Conversion Kit CK19-16
Revision Page
0 12(17)
Writer: MG <QF7720961 rev8>
Conversion Kit CK19-16
Revision Page
0 13(17)
Writer: MG <QF7720961 rev8>
7. Connect the buckle harness to the vehicle (vehicles without connector under the seat).
– Route the buckle harness down to the air supply hose opening in the vehicle floor (secure to seat frame with cable ties).
NOTE
Make sure that the harness will not get pinched by internal seat components (during seat adjustment or seat movement).
– Pass the harness inside the vehicle front compartment (through air supply opening).
– Inside the front compartment, connect the harness to the C.SE51 connector.
– Secure the harness with cable ties inside the compartment.
Conversion Kit CK19-16
Revision Page
0 14(17)
Writer: MG <QF7720961 rev8>
PROGRAMMING STEPS:
1. In Premium TechTool, select PROGRAM tab. In PROGRAM tab, select operation 1700-22-03-06 Accessory Kit then clicks START.
2. Enter Accessory kit number 23687694 Click on PROGRAM button below and then follow the instructions. The programming process will start
Conversion Kit CK19-16
Revision Page
0 15(17)
Writer: MG <QF7720961 rev8>
Conversion Kit CK19-16
Revision Page
0 16(17)
Writer: MG <QF7720961 rev8>
Conversion Kit CK19-16
Revision Page
0 17(17)
Writer: MG <QF7720961 rev8>
PARTS / WASTE DISPOSAL
Discard waste according to applicable environmental regulations (Municipal/State[Prov.]/ Federal)
ESTIMATED TIME
The time required to perform this special bulletin is approximately 3.0 hours.
Access all our Service Bulletins on https://techpub.prevostcar.com/en/
or scan the QR-Code with your smart phone.
E-mail us at technicalpublications_prev@volvo.com and type “ADD” in the subject to receive our warranty bulletins by e-mail.
Prevost engages in a continuous program of testing and evaluating to provide the best possible product. Prevost, however, is not committed to, or liable for updating existing products.
CK19-16
06.2019
- COLORLESS & ODORLESS LEATHER CLEANER (SPI_208_16) – Chemical Guys leather cleaner gently cleans leather surfaces without dyes or scents, lifting dirt, oils, and embedded dirt while preserving the natural look and feel
- SAFE FOR ALL LEATHER TYPES – A leather cleaner for car interiors, natural, synthetic, faux, and pleather; ideal for furniture, boots, jackets, handbags, and more
- REMOVES DIRT & GRIME – This car leather cleaner breaks down body oils, food spills, dust, and daily buildup without leaving residue, streaks, or causing discoloration
- PREPS FOR CONDITIONING – This Chemical Guys interior cleaner for cars and leather furniture cleaner is the perfect first step before applying a leather conditioner or protectant to maintain durability, suppleness, and appearance
- EASY TO USE – Spray directly on leather, as a leather car seat
cleaner, or onto a microfiber applicator, gently scrub with a soft brush, and wipe clean for refreshed, clean leather
- NON TOXIC, GENTLE CLEANER: Our proven, rejuvenating formula is a powerful, fragrance-free cleaner ideal for all your leather goods (except suede). EPA Safer Choice certified
- CLEAN ALL TYPES OF LEATHER: Quickly and gently removes dirt, oil, tough stains and grime from car seats, truck seats, upholstery, furniture, handbags, purses, shoes, accessories, saddles, and tack. Effectively cleans leather of all colors, including white leather. Safe for exotic leather, faux, vinyl
- SAFE FOR YOU, SAFE FOR LEATHER: Made with non-toxic, high-quality ingredients that makes your leather last longer. Safe for people, pets & your leather
- TEST & APPLY: Apply leather cleaner with a lint-free cloth. No need to scrub or rub — simply wipe down and allow it to dry. Spot test on each leather item first. Not for use on suede
- AMERICAN MADE SINCE 1968: Our premium leather care formulas have had a cult following among leather experts, retailers and high-end car and furniture makers and enthusiasts for over 50 years.
- Cleaning & conditioning: Powerful leather cleaner and conditioner that removes dirt, oils, grime, and residue while restoring natural suppleness and improving the look and feel of leather furniture, car seats, couches, sofas, jackets, handbags, shoes, saddles, and tack. This cleaning leather treatment nourishes and revitalizes finished leather surfaces, helping maintain softness and long‑lasting protection.
- UV protection to prevent cracking: Provides advanced UV protection for leather, helping prevent fading, drying, discoloration, and cracking caused by sunlight exposure. This leather protector shields car leather seats, leather furniture, couches, and handbags to maintain long‑lasting color and durability.
- Works on all finished leather: Safe and effective on all finished leather surfaces, including car interiors, leather couches, sofas, recliners, office chairs, jackets, handbags, boots, shoes, baseball mitt, horse tack, and accessories. Also suitable as a faux leather cleaner and conditioner, making it a versatile solution for home and automotive leather care.
- No sticky residue: Leaves no greasy residue, making it ideal for leather restoration, leather maintenance, and routine conditioning.
- Premium Leather Care: Trusted by millions for high‑quality leather cleaning and conditioning, Weiman delivers professional‑grade results for car leather care, leather furniture maintenance, and everyday leather restoration. A top choice for customers seeking a reliable, long‑lasting leather care solution backed by decades of expertise.
- COMPLETE LEATHER CARE KIT (SPI_109_16) - This Chemical Guys kit includes Cleaner and Conditioner, two 16 oz bottles that work together to clean, restore, and protect leather in cars, homes, and more
- CLEANS AND CONDITIONS - Chemical Guys interior cleaner for leather that lifts dirt and grime while the Conditioner nourishes and restores leather suppleness, leaving interior surfaces soft, smooth, refreshed
- VERSATILE USE - This car leather cleaner and conditioner kit is designed for automotive interiors and equally effective on leather furniture, apparel, shoes, boots, jackets, handbags, and other everyday leather goods
- SAFE & EFFECTIVE CAR LEATHER CONDITIONER AND CLEANER- pH-balanced formulas are safe for all natural, synthetic, and sealed leathers; gentle cleaning power helps prevent cracks, fading, and drying while preserving the original finish
- EASY TWO-STEP SYSTEM - Use this Leather Cleaner for car interiors to remove embedded dirt, then apply Leather Conditioner to hydrate and protect; achieve professional results at home or in your garage
- BRING YOUR LEATHER BACK TO LIFE: Safely remove dirt, soil & residue to soften, strengthen & moisturize neglected leather.
- EASY TO USE FORMULA: Our multi-action formula conditions & protects in one simple step to maintain and restore any finished leather surface
- MULTIPLE USES: Use regularly on accessories such as leather, purses, shoes, boots, briefcases & handbags. Condition leather sofas, couches, and chairs to restore their beauty and suppleness.
- UVX PROTECTION: Weiman Leather Conditioner contains UVX-15 sunscreen which protects all types of leather from sun damage, fading, drying & cracking
- CARE FOR YOUR AUTO INTERIOR: Perfect for cleaning, protecting, and restoring your car, SUV, truck, motorcycle or Jeep seats and interior.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.