August 22, 2019 NHTSA CAMPAIGN NUMBER: 19V620000
Missing Backup Cameras/FMVSS 111
The lack of rear visibility increases the risk of a crash.
NHTSA Campaign Number: 19V620
Manufacturer Daimler Trucks
North America LLC
Components BACK OVER PREVENTION
Potential Number of Units Affected 11
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Thomas Built Minotour school buses. The school buses may be missing backup cameras. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, “Rearview Mirrors.”
Remedy
DTNA will notify owners, and dealers will add a backup camera system, free of charge. DTNA issued owners an interim notification date on October 11, 2019. The recall began December 23, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-825.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
Recall Campaign
Daimler Trucks
North America LLC
December 2019
FL825A
NHTSA #19V-620
Subject: TBB Minotour Backup Cameras
Models Affected: Specific Model Year 2019-2020 Thomas Built Buses Minotour SRW school buses manufactured August 17, 2018, through March 31, 2019.
General Information
Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Thomas Built Buses (TBB), has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above.
There are 11 vehicles involved in this campaign.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
A backup camera system will be installed. Thomas will contact the dealers who will do the work directly.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.
Work Instructions
Work instructions will be provided in the installation kits.
Replacement Parts
Installation kits for backup camera systems have been sent directly to the specific dealers who will install them on the affected buses. If you have not been contacted by TBB, your location will not be performing this recall.
Removed Parts
Please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts.
Labor Allowance
Table 2 – Labor Allowance
| Campaign Number | Procedure | Time Allowed (Hours) | SRT Code | Corrective Action |
| FL825A | Install backup camera and mirror video monitor | 1.0 | 996-R002A | 12 – Repair Recall/Campaign |
Table 1
Claims for Credit
You will be reimbursed for your parts, labor, and handling by submitting your claim through the Warranty system within 30 days of completing this campaign. Please reference the following information in OWL:
- Claim Type is Recall Campaign.
- In the Campaign field, enter the campaign number (FL825-A )
- In the Primary Failed Part field, enter 25-FL825-000.
- Enter nothing in the Parts section.
- In the Labor section, enter the appropriate SRT from the Labor Allowance Table.
- The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign.
- U.S. and Canada – Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the following:
- Accept the documentation of the previous repair.
- Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement.
- Submit a Recall Pre-Approval request for a decision and authorized amount.
- Submit a “based on” claim for the approved pre-approval.
- Attach the documentation to the pre-approval request.
- When your claim is paid, reimburse the customer the appropriate amount.
IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has not been previously completed.
If you have any questions or need additional information, contact the Warranty Campaigns Department via Web inquiry at DTNAConnect.com / WSC.
A sample letter notifying vehicle owners is included for your reference.
Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code, Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors and retail outlets within five working days.
Copy of Notice to Owners
Subject: TBB Minotour Backup Cameras
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2019-2020 Thomas Built Buses Minotour SRW school buses manufactured August 17, 2018, through March 31, 2019.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
A backup camera system will be installed.
This is the second letter regarding this recall. The repair is now available. Thomas Built Buses will provide backup camera kits to your local dealer. The dealer will contact you to schedule an appointment. The repair should take approximately an hour and will be performed at no charge to you.
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. For further information, please contact the Warranty Department at (336) 889-4871, 8 a.m. to 5 p.m. Eastern Time Monday through Friday. To find a dealer in your area please go to www.thomasbus.com.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m to 4:00 p.pm, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety
Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
THOMAS BUILT BUSES WARRANTY DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair.
- The Vehicle Identification Number (VIN) of the vehicle that was repaired.
- What problem occurred, what repair was done, when the repair was done.
- Who repaired the vehicle.
- The total cost of the repair expense that is being claimed.
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).
Reimbursement will be made by check from your Daimler Trucks North America LLC dealer. Please speak with your Thomas Built Buses authorized dealer concerning this matter.
Work Instructions
Subject: TBB Minotour Backup Cameras
Models Affected: Specific Model Year 2019-2020 Thomas Built Buses Minotour SRW school buses manufactured August 17, 2018, through March 31, 2019.
IMPORTANT:
Work Instructions are included in the installation kits for the backup camera system. Thomas will contact locations directly if they will be performing this recall and provide the parts and instructions.
If Thomas has not contacted your location, you will not be performing this recall.
Recall Campaign
Daimler Trucks
North America LLC
December 2019
FL825A
NHTSA#19V-620
Work Instructions
Subject: TBB Minotour Backup Cameras
Models Affected: Specific Model Year 2019-2020 Thomas Built Buses Minotour SRW school buses manufactured August 17, 2018, through March 31, 2019.
Parts
Kit Contents:
The harness is supplied in three sections (see Figure 1):
- Monitor End – Marked A
- Extension – Marked B
- Camera End – Marked C
Mirror/Monitor Mounting
- Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires
- Remove the rear view mirror from the front glass, leaving the mounting block on the glass.
- Attach the mirror mount to the back of the mirror/monitor. Ensure correct orientation.
- Install the mirror/monitor and mount on the windshield using the existing mounting block. Tighten with the Allen wrench. See Figure 2.
- Connect the orange-taped end of Section A of the harness to the pigtail from the mirror/monitor. See Figures 2 and 3.
When routing is complete, connect ground to rafter
Connect green and red wire, then tie to the red wire on the extension harness (B)
Connect this end to the mirror/monitor
Connect the harness extension (B) to this video plug
V1 IN – do not connect
- Install loom on this entire section.
- Feed this end through the bulkhead hole with all other switch harnesses.
- Pull the harness out near the windshield and over to the mirror/monitor so it feeds down in a straight line.
- Connect the pigtail and harness; tuck excess up into the bulkhead.
- Route harness Section A toward the main body harness. Use a method that supports the harness.
Camera Mounting
- Drill a 5/8-inch hole approximately 1 inch below the horizontal centerline, as shown in Figure 4.
- Remove the nut from the back of the camera and retain. Feed the wire from the back of the camera into the bulkhead.
- Attach the double-sided tape to the camera and then the camera to the rear cap, centered over the drilled hole. Ensure the camera faces down and is level horizontally.
- Feed the nut along the harness to the camera and tighten. Ensure the mounting of the camera does not move.
- Remove the harness covers above the windows on the driver’s side of the bus.
- Cover the camera harness with loom and route above the windows on the driver’s side of the bus. See Figure 5.
- Connect Section C of the harness as shown in Figure 6.
Connect to the plug from the camera
Connect to the extension harness (Section B)
Connect the red wire to the 12V wire on the reverse lights and to the red wire on the harness extension (Section B)
Connect the black wire to a solid ground or to a ground on the reverse lamp. The red wire from the extension harness (Section B) will install at the same location.
Use LW13 OR LW14 for reverse connection to the main harness.
- Connect the harness extension (Section B) yellow video plug with the red wire to the video plug on the main harness. It may be installed in either direction. Note: Do not use the AV1 section of the main harness.
- Tie up excess wiring evenly along the main harness.
- Check for proper operation of the backup camera.
- Install the harness cover and bulkhead cover removed earlier.
Daimler Trucks
North America LLC
December 2020
FL825A
NHTSA #19V-620
IMPORTANT SAFETY RECALL
See enclosed VIN list
Subject: TBB Minotour Backup Cameras
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2019-2020 Thomas Built Buses Minotour school buses manufactured August 17, 2018, through March 31, 2019.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
A backup camera system will be installed.
This is the second letter regarding this recall. The repair is now available. Thomas Built Buses will provide backup camera kits to your local dealer. The dealer will contact you to schedule an appointment. The repair should take approximately an hour and will be performed at no charge to you.
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m to 4:00 p.pm, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
THOMAS BUILT BUSES WARRANTY DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair.
- The Vehicle Identification Number (VIN) of the vehicle that was repaired.
- What problem occurred, what repair was done, when the repair was done.
- Who repaired the vehicle.
- The total cost of the repair expense that is being claimed.
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).
Reimbursement will be made by check from your Thomas Built Buses dealer.
Please speak with your Thomas Built Buses authorized dealer concerning this matter.
Daimler Trucks
North America LLC
October 2019
FL825A
Interim Recall Notice
NHTSA #19V-620
IMPORTANT SAFETY RECALL
See Enclosed VIN List
Subject: TBB Minotour Backup Cameras
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, Inc., has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2019-2020 Thomas Built Buses Minotour school buses manufactured August 17, 2018, through March 31, 2019, without a backup camera.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. The repair is being validated and parts are being procured. You may continue to operate your vehicle.
The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Thomas Built Buses dealer to schedule the Recall for your vehicle.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: (800) 424-9153); or to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
SEOCONTENT-START
Defect Information Report
(Section 573.6)
FL-825
Date of Submission: August 22, 2019
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: 0 Safety Defect X Non-Compliance
Vehicle Information
Model Yr. Start: 2019
Make: Thomas Built Buses
Model: Minotaur
Production Dates: Begin: 08/17/2018
Descriptive Information:
Model Yr. End: 2020
End: 03/31/2019
Certain school buses within the referenced above dates may have missing backup cameras.
Number potentially involved: 11 Estimated percentage of involve with defect: 100%
Defect/ Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
A display of rearview image per FMVSS 111 was not provided on select vehicles.
If a noncompliance, provide the applicable FMVSS:
FMVSS 111
Describe the safety risk:
Lack of rear visibility on certain vehicles as required by FMVSS111 can increase the risk of a backover
crash, particularly those involving vulnerable populations.
If applicable, identify the manufacture of the defective or non~ompliant component.
NA – component missing due to specification error.
Chronology of Defect/ Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision.:
July 18, 2019 DTNA became aware that certain vehicles in the field may not have been equipped with a
backup camera. DTNA began an investigation to identify the root cause for this omission and to review
the FMVSS requirements. August 16, 2019, DTNA, with an abundance caution decided to conduct a
compliance recall.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.
Vehicles will be repaired by adding a backup camera system. Repairs will be performed by Daimler Trucks
North America authorized service facilities. Copies of the reimbursement plan will be submitted as a
supplemental report when available.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
Customer notification will be made by first class mail using Daimler Trucks North America records to
determine the customers affected.
Planned Dealer Notification Begin Date:
Planned Dealer Notification End Date:
Planned Owner Notification Begin Date:
Planned Owner Notification End Date:
10/20/2019
10/20/2019
10/20/2019
10/20/2019
Manufacture’s identification code for this recall (if applicable): FL-825
DTNA Representative;
~~
Andy Jones
Manager
Compliance and Regulatory Affairs
*************************************************
The information contained in this letter supercedes and supplements any related policies and procedures in any previously
released bulletins, the Warranty Manual, and/or previously released letters. Failure to read or distribute this letter will not
exempt addressees from compliance with the information contained herein.
Page 1 of 4
Daimler Trucks North America LLC
REF #:
ICI19-054
Effective:
10/7/2019
Release:
10/7/2019
SUBJECT:
TBB FL825 – Interim Recall Notice
This letter is to inform you that an interim recall notice will be sent to affected customers for upcoming recall FL825 ~ TBB Minotour Backup Cameras. The interim notices will mail approximately October 11, 2019. A copy of the notice follows for reference.
This notice is for informational purposes only. There is no action for customers or dealers to take at this time. If customers inquire, please refer them to the interim recall notice and let them know the recall will begin when all preparations are completed.
If you have questions or need further information, contact the Warranty Campaigns Department by submitting an inquiry through the WSC Link on DTNAConnect.
WARRANTY CAMPAIGNS DEPARTMENT
P.O. Box 4090
800-547-0712
Portland, Oregon 97208-4090
ATTENTION: Dealer Principal, Warranty Manager, Service Manager, Parts Manager
Freightliner Dealers – U.S. and Canada
Western Star and Sterling Dealers – U.S. and Canada
FCCC Dealers – U.S. and Canada
Direct Warranty Customers – U.S. and Canada
Export Distributors
If you have questions about this Letter, please submit your inquiry on the Web using the WSC Link on DTNAConnect
Daimler Trucks
North America LLC
October 2019
FL825A
Interim Recall Notice
NHTSA #19V-620
IMPORTANT SAFETY RECALL
See Enclosed VIN List
Subject: TBB Minotour Backup Cameras
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, Inc., has decided
that a defect which relates to motor vehicle safety exists on specific Model Year 2019-2020 Thomas Built Buses Minotour school buses manufactured August 17, 2018, through March 31, 2019, without a backup camera.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. The repair is being validated and parts are being procured. You may continue to operate your vehicle.
The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Thomas Built Buses dealer to schedule the Recall for your vehicle.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712,
7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic
Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at
(888) 327-4236 (TTY: (800) 424-9153); or to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Daimler Trucks North America LLC
Thomas Built Buses, Inc.
1408 Courtesy Road
High Point, NC 27260
800.547.0712 Phone
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| THOMAS BUILT BUSES | MINOTOUR | 2019-2020 |
11 Associated Documents
Interim Owner Notification Letter(Part 577)
RIONL-19V620-4834.pdf 66.655KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V620-6378.pdf 60.042KB
Manufacturer Notices(to Dealers,etc)
Recall Quarterly Report #1, 2019-4
RCLQRT-19V620-2568.PDF 211.142KB
Recall Quarterly Report #2, 2020-1
RCLQRT-19V620-5224.PDF 211.238KB
Recall Acknowledgement
RCAK-19V620-7854.pdf 244.674KB
Non-Compliance Notice 573 Report
RCLRPT-19V620-4572.PDF 212.58KB
Miscellaneous Document- 573 Defect Information Report
RMISC-19V620-8593.pdf 580.925KB
Remedy Instructions and TSB
RCRIT-19V620-1181.pdf 421.154KB
Remedy Instructions and TSB
RCRIT-19V620-4219.pdf 118.687KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V620-6577.PDF 211.321KB
Latest Recalls Documents
- 【Continuous Upgraded 1080P AHD Backup Camera】After launching three car backup cameras, PixelMan further upgrade and launch the new reversing camera PMD2A-S. This car camera use the latest chip special for reversing camera made in Japan, this chip not only has excellent image output, but also has stunning performance under strong light and dark light. Strict in details and only make the best products is what PixelMan pursues. It is also essential to you, isn't it?
- 【Support HD and AHD switching】This upgraded back up camera even supports HD and AHD switching. Each optimization improves the definition, signal stability, waterproof performance, durability, installation, etc. Our vehicle backup camera can be switched to AHD signal output to achieve 1080P display (Under the premise that the screen supports AHD signal).
- 【1/2.7in AHD 1080P Large Chip Adopted in This Reverse Cam】The chip size determines the amount of reversing camera output pixels, compared with 1/4in chip used in ordinary backup cam, the most apparent feature is the enhanced brightness and color saturation besides of the sufficient clarity. The colors become more vivid and true, the increased brightness makes the images more clearly, meanwhile, the night vision effect also be enhanced, you can back the car easily without extra light at night.
- 【170° Wide Angle Optical Glass HD Lens】The lens is the core component of the reverse camera for car. The HD lens used in PMD2A-S wide angle backup camera is very different from ordinary lens in appearance, it has a larger aperture and a stronger sense of technology. High transmittance glass, fish eye appearance, F1.4 aperture, all these features directly determine the wide angle, maximum output pixels and night vision performance of the license plate camera.
- 【Back Up The Car Easily】Whether it is day or night, you can see almost everything behind the car when reversing, PixelMan camera for car reverse will let your driving easier and safer. Isn’t it what you need?
- PLUG AND PLAY: The backup camera for car takes only 15 minutes from start to finish installation, just 2 steps: ① First connect the camera and monitor through the 4-pin video power cable made of 3.0MM pure copper that comes with the camera. ② Then plug the backup camera system into the cigarette lighter or USB plug (not included), manual switch, plug and play. Or you can also connect it to the reversing lights only as a reversing use, automatically triggering the reversing image when reversing
- STABLE SIGNAL TRANSMISSION: The LK3 back up camera for cars is superior in signal stability compared to other backup camera kit. It will automatically minimize energy loss during transmission, not only will there be no signal delays, interference, fluctuations or intermittent problems, but also realize the transmission of real-time data, providing you with HD 1080P color images at all times, to ensure safer driving
- WATERPROOF & HIGHLY WEATHER-RESISTANT: The backup camera for truck housing is made of ABS-TC material and also utilizes the latest nano-coating sealing technology with IP69 level waterproof performance, which is able to work perfectly and provide clear images in extreme environments from -22°F to 176°F. It is like a brave guardian, not eroded by any water or fine particles, tenaciously resisting the baptism of wind/rain/dust/high and low temperatures, enhancing the safety index and service life
- ULTRA HD PICTURE: The back up camera systems for car adopts advanced optical anti-shaking technology with SC1346 color image sensor chip to avoid the problem of shaky and blurred images when driving on bumpy roads
- UNIVERSAL COMPATIBILITY AND ADJUSTABLE SETTINGS: The backup camera with monitor is universally compatible with most vehicles, including cars, trucks, trailers, RVs, vans, SUVs, campers, and more. It effectively eliminates blind spots on your vehicle, enhancing safety. Additionally, you can adjust various settings such as brightness, contrast, and image flip to optimize the viewing experience for different lighting conditions and personal preferences
- 1 MINUTE MAGNETIC QUICK INSTALL: This backup camera for truck features a base with 6 powerful magnets made from "3rd generation rare earth permanent NdFeB magnets." It remains functional in extreme conditions, withstanding temperatures as low as -452°F and as high as 1166°F without demagnetizing or falling off. The wireless backup camera base is coated with a soft rubber layer, offering excellent wear resistance while protecting your vehicle's paintwork without compromising the magnetic strength
- SCREEN RESOLUTION & HD NIGHT VISION: Pemacom's self-developed algorithm can improve the clarity of the backup camera picture by about 80% compared to the original. The backup camera wireless is also equipped with the most unique CMOS image sensor and 1080P color chip, which can quickly analyze the picture, and also provide clearer picture at night or under low light environment, effectively suppress glare, restore the truest color, reduce safety hazards, and ensure safer driving
- POWERFUL DIGITAL SIGNAL: The back up camera systems for truck features a more powerful digital signal receiver with frequency hopping technology. It supports 2.4GHz WiFi transmission, offering enhanced anti-interference and stability, increasing performance by 70%. The image remains clear, without frame drops or delays. The magnetic backup camera's signal transmission distance reaches up to 33 feet, suitable for trucks, pickups, cars, trailers, campers, small RVs, and hitch trailers
- EXTRA LONG 24-HOUR BATTERY LIFE: This portable truck backup camera features a built-in 15,000mAh rechargeable lithium-ion battery with larger capacity. The solar backup camera also includes a 5W solar panel and a 5V-2A TYPE-C charger, ensuring longer battery life when power is low or sunlight is limited. A full 5-hour charge provides up to 24 hours of use, making it ideal for long-distance travel
- POWER-SAVING AUTO SLEEP MODE: When the wireless backup camera for trucks is not in use, you can turn off the monitor via the cigarette lighter or USB plug, and the rear view camera automatically enters energy-saving sleep mode. This feature unnecessary power consumption, extends battery life, and improves both safety and durability—without the need for manual shutdown
- Effortless plug-and-play setup: Set up your backup camera for truck in just 15 minutes without any complicated wiring. Simply connect the monitor to your vehicle’s power and the camera to the reverse light. The system is pre-paired, so you can start using it immediately without the hassle of pairing, perfect for busy drivers
- High-Definition clarity: Enjoy crystal-clear HD 1080P video while reversing, parking, or towing. The 7-inch monitor with backup camera for car provides sharp visuals, ensuring safe navigation in any situation. With night vision, you’ll have enhanced visibility even in low light or at night, ensuring you drive with confidence
- Switch with one click: With just one click the CH button, switch to other channels for full flexibility. You can easily switch between different camera views of the back up camera systems for truck, and a continued click will toggle to split-screen mode, allowing you to view multiple cameras at once for complete control and safety while parking or towing
- IP69 waterproof: Featuring IP69 waterproof rating, this back up camera for truck. rv is built to withstand extreme temperatures ranging from -22°F to 176°F. Whether it’s heavy rain, snow, or extreme heat, the camera ensures reliable performance in all weather conditions, providing peace of mind during your travels
- Adjustable parking lines: The adjustable parking lines of the wireless backup camera for trucks offer real-time assistance to guide you through tight spaces. You can customize the lines to suit your driving style, making parking and towing easier, safer, and more efficient with every use
- Premium Quality:This reversing camera can provide a long service life and excellent performance, Features A High-quality, Wide-angleLens For Clear Resolution And Additional Electronics Protection For Reliability In Harsh Conditions. High quality ABS material is used, day and night provide a fine, clear picture.
- Function: This rearview camera can help you clearly see obstacles or pedestrians behind your car when reversing, so that your car can park more accurately into garages and parking Spaces. Stable Signal & Real-time Image .Help you to observe situations behind your car more clearly when reversing and parking, avoid friction and bumps, increase safety as well!
- Compatibility: Comptible with2011 2012 2013 2014 2015 Ford Explorer,this backup camera comes with all the wiring and connectors. It won't destroy the original car style and retains the original car trunk switch function.
- OEM Design: During Each Step Of Production Multiple Quality Control Checks Are Performed to meet or exceed OE (original equipment) fit, form, and function and Insure Each And Every Part Lasts For Years To Come.
- Easy setup: This backup rearview camera is easy to install, oem plug and play, uses quality materials and has a long life.
Last update on 2026-05-22 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.