September 10, 2019 NHTSA CAMPAIGN NUMBER: 19V649000
Foam Pump System May Overheat and Fail
If the fire fighting foam chemical injection is unavailable, it can impact the fire fighting and/or vapor mitigation efforts, which increases the risk of injury to bystanders and emergency personnel.
NHTSA Campaign Number: 19V649
Manufacturer E-One
Incorporated
Components EQUIPMENT
Potential Number of Units Affected 1
Summary
E-One Incorporated (E-One) is recalling one 2018 Typhoon emergency vehicle equipped with a Hale SmartFoam 6.5 foam pump system with a 12 volt power supply. The foam pump system can overheat and fail, causing fire fighting foam chemical to be unavailable to fight a fire.
Remedy
E-One will notify owners, and a Hale dealer will replace the SmartFoam 6.5 12 volt system with SmartFoam 6.5 24 volt system and a voltage converter, free of charge. The recall began October 15, 2019. Owners may contact E-One customer service at 1-352-861-3612 or Hale at 1-800-533-3569.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| E-ONE | TYPHOON | 2018 |
5 Associated Documents
Defect Notice 573 Report
RCLRPT-19V649-4698.PDF 212.913KB
Recall Acknowledgement
RCAK-19V649-9951.pdf 244.758KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V649-8895.PDF 211.125KB
Recall Quarterly Report #2, 2020-1
RCLQRT-19V649-0290.PDF 211.221KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V649-7689.PDF 211.303KB
Latest Recalls Documents
- Input Voltage: 12V nominal, Input Current: 10A (max) ; Output Voltage: DC 24V 10A 240W
- Maximum Efficiency:≥95%; Ripple Wave: 50Mv; Starting delay time:≤2S. If the product does not function, check whether the positive and negative terminals are reversed. The label on the back of the product provides connection instructions for the positive and negative terminals. Please follow the instructions.
- Over-current /Over-load /Low-load /Short-circuit /Over-heat intelligent protection
- Compact aluminium shell with epoxy potting, 100% waterproof, anti-dust, anti-shock protection and better heat dissipation. Two quick-connect terminals make it easy to quickly connect your devices.
- Widely used to golf cart, motor, speaker, GPS, LED car display screen, air-conditioner, electric fan, solar energy, photo-voltaic power, DVD, industrial equipment ect.
- DC 12V to DC 24V Step Up Converter. (9-20V Wide Range Input) Max Current 5A 120W.
- Waterproof housing makes the converter ideal for use in a wide range of applications including vehicles, security systems, hospital equipment, telecommunications etc
- Built-in over-voltage, under-voltage, overload, over-heat and short circuit protection
- The 12v to 24v dc step up converter length of the line is about 12CM, slim, small volume, easy installation.
- High quality and performance. 3 Year Warranty.
- Conventional Constant Voltage Output BOOST Fully Integrated Solutions, Integrated MOSFET, Fewer External Components, Smaller Cos System
- XL6019 5A Current DC to DC Adjustable Boost Power Supply Board Module
- Adjust the blue knob of the potentiometer (counterclockwise general impulse, buck clockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage
- Built-in over temperature protection, full set overcurrent protection circuit reliability, high reliability
- Input and Output must be connected correctly
- VOLTAGE RANGE: Input voltage: 10V to 22V; Output voltage: DC 24V; Output current: 15A; Maximum output power: 360W; Small Size and easy to place in any applications.
- POWER CONVERTER: Waterproof IP67 sealed module with sturdy housing. Prevents splashing water, dust and moisture, stable performance and Durable ideal for outdoor and heavy-duty working conditions.
- INTELLIGENT PROTECTION: Supports output short-circuit protection, overcurrent protection, and overtemperature protection; Operating temperature -20 to 65℃, in order to extend the service life of the power supply, please use rated output current ≤50%
- INSTALLATION: Easy to install, pull of the boost key 90° MAX, insert the wire, press the boost key tightly; The converter has a red and black wire, the red is connected to the positive electrode, and the black is connected to the negative electrode
- WIDE APPLICATION: A wide range of use, the excellent voltage reducer can be used for car audio, intercom, monitoring system, taxi advertising screen, golf cart, boats, LED lights and so on
- Input voltage range: DC10-16V ( recommended 12V)
- Output Voltage: 24V(Fixed Output), Output Current:10A, Output Power:240W, High Conversion Efficiency: up to 97%
- Protection: overload, overcurrent, over temperature, short circuit, overvoltage. Design: Aluminum shell and silicone seal are more durable: waterproof, shockproof, moisture-proof, and dustproof.
- The use of organic silicone sealing, with waterproof, dustproof, seismic effect. Commonly used in robots, pumps, CNC equipment, motors and printers, etc
- Note: Boost converter input should be larger than the output current, for example, output 3A, input 6A, otherwise it will not achieve the effect you want, if your equipment current is large, please buy a larger than your equipment 2A converter Please check the battery pack to see if it can reach the output power current effect
This product presentation was made with AAWP plugin.