Shifter Shaft May Break – CravenSpeed Fiat Short Shifter

July 3, 2019 NHTSA CAMPAIGN NUMBER: 19E044000

Shifter Shaft May Break

If the shifter breaks while the vehicle is in motion, it can increase the risk of a crash.

 

NHTSA Campaign Number: 19E044

Manufacturer DLT, LLC

Components POWER TRAIN

Potential Number of Units Affected 740

 

Summary

DLT, LLC. is recalling certain CravenSpeedeBay logo FiateBay logo Short Shifter shafts sold for use in 2011-2019 FiateBay logo 500 vehicles. The Shifter Shaft may have been improperly manufactured with a through hole for the set screw rather than a blind hole, which may lead to the breakage of the Shifter Shaft.

 

Remedy

DLT has notified owners, and will provide a complete replacement shifter assembly with an updated shaft, free of charge. The recall began July 24, 2019. Owners may contact DLT customer service at 1-503-505-6886.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


CravenSpeedeBay logo

IMPORTANT SAFETY RECALL -​ Remedy Available​

 

Recall Campaign No. 19E0-44: FiateBay logo 500 Short Shifter

 

To our Customers:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Out of an abundance of caution, CravenSpeedeBay logo has decided that a defect which relates to motor vehicle safety exists in our Short Shifter for FiateBay logo 500’s. This defect has affected only .5% of the shifters manufactured and sold prior to September 2017. There have not been any injuries due to this defect but it is important to us to get these items replaced, so that you do not experience any issues related to the potential for this item to fail.

 

DESCRIPTION OF PROBLEM 

The issue is the stainless steel shaft portion of your shifter. At the point where the curved arm attaches to the shifter shaft there is a hole drilled completely through for the arm to attach. The shaft can break at this weak point.

 

NEXT STEPS 

  1. Please review your records for the names, addresses, email addresses, or telephone numbers of any consumers to whom you may have sold one of the affected units. Please furnish this information to CravenSpeedeBay logo. We will be obliged to send them notification of the defect and the fact that their shifter can be replaced free of charge. 
  2. Please inspect your inventory. The through hole is not able to be identified visually since it is covered by the curved arm at attaches at that point. If you have any inventory which MAY have been sold to you before September 2017 please allow us to replace it for you free of charge. 

We are very sorry to inconvenience you in this manner, but we really want to be sure that there is no potential for anyone to be injured or have their FiateBay logo out of commission due to the defect described. If you are able to send us any information you have that would assist us in contacting customers who may be affected by this recall then CravenSpeedeBay logo will handle all the time and expense of replacing these items instead of that responsibility falling to your business. We really appreciate you working with us to make sure we can reach any many shifter owners as possible.


CravenSpeedeBay logo

 

IMPORTANT SAFETY RECALL -​ Remedy Available​

 

Recall Campaign No. 19E0-44: FiateBay logo 500 Short Shifter

 

To our Customers:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

CravenSpeedeBay logo has decided that a defect which relates to motor vehicle safety exists in certain FiateBay logo 500 Short Shifters.

CravenSpeedeBay logo wants to offer you a free replacement short shifter if you purchased one before September of 2017, and we are contacting you because we think you might have one. The NHTSA is not asking us to do this, we involved them to make sure that we are doing everything we can to replace as many of these shifters as possible; because we really do care a lot about our customers. Roughly one half of a percent of our shifters have broken, cracked in half, at the spot where the curved arm connects to the shaft. After the first time this occurred we were able to update the design to strengthen it significantly, even though it seemed unlikely it could happen again (because we tried breaking them and couldn’t). It did happen to a few others though, so we decided that every shifter in the wild ought to be updated the same way.

There have not been any injuries due to this defect but if yours broke it would at least ruin your day, so we want to get ahead of it and make sure that does not happen to anyone else. We’ll outline how to get a free upgraded shifter below.

 

DESCRIPTION OF PROBLEM 

The issue is the stainless steel shaft of your shifter. At the point where the curved arm attaches to the shifter shaft there is a hole drilled completely through for the arm to attach, creating a weak point.

 

PRECAUTIONS FOR YOUR SAFETY 

  1. CONTACT CRAVENSPEEDeBay logo IMMEDIATELY FOR INSTRUCTIONS ON HOW TO EXCHANGE YOUR SHIFTER FOR A FREE REPLACEMENT AS SOON AS POSSIBLE.

(Email: recall@cravenspeedeBay logo.com phone: 503-505-6886)

  1. Reinstall the stock shifter to ensure that you do not experience any issues with the recalled item.
  2. In some cases, drivers notice the feel of the shift changing prior to the shifter actually breaking. Be cautious of any changes to your shifting and contact CravenSpeedeBay logo immediately.
  3. If you are not the only driver of the vehicle please advise all other drivers and passengers of this important info.

 

SAFETY RISK 

If the shifter breaks while the vehicle is in motion, it can increase the risk of a crash.

 

DESCRIPTION OF REPAIR 

Your entire shifter will be replaced free of charge. This repair will take 0.5 hours. Your new shifter will perform exactly the same but the hole in the shaft will not be drilled all the way through, increasing the strength of the item significantly.

If you have the stock shifter available for reinstall: CravenSpeedeBay logo will email (or mail) you a pre-paid return label for the recalled item. Once the item is received at our shop CravenSpeedeBay logo will mail a replacement

If you do not have the stock shifter:​ You can order a new shifter from www.cravenspeedeBay logo.com with free express shipping. We will include a return label for the recalled item in the shipment. You will be refunded 100% once the recalled item has been returned to our shop.

 

OTHER INFORMATION 

If you have any questions or concerns please contact CravenSpeedeBay logo (Email: recall@cravenspeedeBay logo.com​ phone: 503-505-6886) or go to csrecall.com for step by step instructions.

If you are no longer the owner of a vehicle with this shifter we would appreciate your furnishing us with the name and address of the new owner.

We are really sorry about the inconvenience of this recall. The quality of our products and customer service are top priorities for us. No matter how unlikely, we want to ensure that no one is injured or has their FiateBay logo out of commission due to this recall.

If you do not find that CravenSpeedeBay logo is able to adequately address your needs with respect to this recall you may notify the Administrator, National Highway Traffic and Safety Administration, 1200

New Jersey Ave., S.E. Washington, DC 20590, call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153), or go to https://www.safercar.gov

 

Tread Act Customer Reimbursement Plan 

Please contact CravenSpeedeBay logo if you have paid for a new shifter as a result of the issue described in this letter and you would like to be considered for reimbursement.

 

Please note:

  • Only the cost of the part subject to recall is eligible for reimbursement, not consequential expenses such as towing, rental, accommodations, damage repairs, etc.
  • Expenses for repairs occurring more than 10 days after this notification will not be eligible for reimbursement.

We seriously hope that you have not already been inconvenienced by the issue described in this letter, but we are sure we can help resolve any problems that have arisen; it’s what we do.

 

CravenSpeedeBay logo
7337 SW Tech center Dr.
Portland, OR 97223 


10 Affected Products

Equipment

BRANDPART NO.PRODUCTION DATES
CRAVENSPEEDeBay logoSHIFTER SHAFT12/01/2011 – 02/27/2015

 


Vehicle

MAKEMODELYEAR
FIATeBay logo5002011-2019

 


9 Associated Documents

Recall 573 Report – Amendment 1

RCLRPT-19E044-4925.PDF 215.745KB

 


Recall Quarterly Report #2, 2019-4

RCLQRT-19E044-3240.PDF 211.212KB

 


Recall Quarterly Report #3, 2020-1

RCLQRT-19E044-0878.PDF 211.296KB

 


Recall Acknowledgement

RCAK-19E044-8204.pdf 277.275KB

 


Manufacturer Notices(to Dealers,etc) – Dealer Notification Letter

RCMN-19E044-9285.pdf 75.965KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19E044-8259.pdf 92.56KB

 


Defect Notice 573 Report

RCLRPT-19E044-1700.PDF 215.699KB

 


Recall Quarterly Report #1, 2019-3

RCLQRT-19E044-4955.PDF 211.114KB

 


Recall Quarterly Report #4, 2020-2

RCLQRT-19E044-0763.PDF 211.397KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19E044&docType=RCL

 


 

Bestseller No. 1
CravenSpeed Stubby Jr Antenna Compatible with Chevy Colorado 2015-2026 | 2 inches | Short Antenna Replacement | Made in The USA
2,202 Reviews
CravenSpeed Stubby Jr Antenna Compatible with Chevy Colorado 2015-2026 | 2 inches | Short Antenna Replacement | Made in The USA
  • ✔ IMPROVE THE LOOK OF YOUR CHEVY COLORADO: The Stubby Jr antenna is compatible with Chevy Colorado (2015-2026). The Stubby Jr is designed to match the factory base perfectly so it looks as good as the stock antenna on your car
  • ✔ INSTALL IN SECONDS: You won't need any tools. The Stubby Jr is easy to install by hand in a matter of seconds
  • ✔ MADE IN USA: Each Stubby Jr is made here in the US of A. These minieBay logo antennas are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!
  • ✔ BUILT TO LAST FOREVER: The Stubby Jr is 2 inches of all metal. It's small enough to be sure to fit under your garage door and incredibly sturdy- machined out of billet aluminum & then powder coated with a durable black textured finish that will not fade break or chip.
  • ✔ RECEPTION IS KEY: If you are curious about reception; read the reviews. Although some folks have had trouble, it is actually really uncommon. If you are not completely satisfied with your Stubby, we make return super simple
Bestseller No. 2
CravenSpeed Stubby Jr Antenna Compatible with Ford Ranger 2019-2026 | 2 Inches | Short Antenna Replacement | Made in the USA
2,725 Reviews
CravenSpeed Stubby Jr Antenna Compatible with Ford Ranger 2019-2026 | 2 Inches | Short Antenna Replacement | Made in the USA
  • ✔ IMPROVE THE LOOK OF YOUR RANGER: The Stubby Jr antenna is compatible with FordeBay logo Ranger (2019-2026). The Stubby Jr is designed to match the factory base perfectly so it looks as good as the stock antenna on your car. The Stubby Also fits on FordeBay logo Everest models.
  • ✔ INSTALL IN SECONDS: You won't need any tools. The Stubby Jr is easy to install by hand in a matter of seconds
  • ✔ MADE IN USA: Each Stubby Jr is made here in the US of A. These minieBay logo antennas are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!
  • ✔ BUILT TO LAST FOREVER: The Stubby Jr is 2 inches of all metal. It's small enough to be sure to fit under your garage door and incredibly sturdy- machined out of billet aluminum & then powder coated with a durable black textured finish that will not fade break or chip.
  • ✔ RECEPTION IS KEY: If you are curious about reception; read the reviews. Although some folks have had trouble, it is actually really uncommon. If you are not completely satisfied with your Stubby, we make return super simple
Bestseller No. 3
CravenSpeed Stubby Antenna Compatible with Ford F-150 2009-2026 | 3.2 Inches | Short Antenna Replacement | Made in the USA
  • ✔ IMPROVE THE LOOK OF YOUR F-150: The Stubby antenna is compatible with FordeBay logo F-150 Trucks (2009-2026). The Stubby is designed to match the factory base perfectly so it looks as good as the stock antenna on your car
  • ✔ INSTALL IN SECONDS: You won't need any tools. The Stubby is easy to install by hand in a matter of seconds
  • ✔ MADE IN USA: Each Stubby is made here in the US of A. They are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!
  • ✔ BUILT TO LAST FOREVER: The Stubby is All Metal. Machined out of billet aluminum & then powder coated with a durable black textured finish that will not fade break or chip. Stainless hardware eliminates corrosion
  • ✔ RECEPTION IS KEY: If you are curious about reception; read the reviews. Although some folks have had trouble, it is actually really uncommon. If you are not completely satisfied with your Stubby, we make return super simple
Bestseller No. 4
CravenSpeed Stubby Antenna Compatible with Mazda Miata 2006-2026 | 3.8 inches | Short Antenna Replacement | Made in The USA
  • ✔ IMPROVE THE LOOK OF YOUR MIATA: The Stubby antenna is compatible with MazdaeBay logo Miata (2006-2026). The Stubby is designed to match the factory base perfectly so it looks as good as the stock antenna on your car
  • ✔ INSTALL IN SECONDS: You won't need any tools. The Stubby is easy to install by hand in a matter of seconds
  • ✔ MADE IN USA: Each Stubby is made here in the US of A. They are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!
  • ✔ BUILT TO LAST FOREVER: The Stubby is All Metal. Machined out of billet aluminum & then powder coated with a durable black textured finish that will not fade break or chip. Stainless hardware eliminates corrosion
  • ✔ RECEPTION IS KEY: If you are curious about reception; read the reviews. Although some folks have had trouble, it is actually really uncommon. If you are not completely satisfied with your Stubby, we make return super simple
Bestseller No. 5
CravenSpeed Platypus License Plate Mount Compatible with BMW X5 2019-2026 [G05] | No Drilling | Installs in Seconds | Made of Stainless Steel & Aluminum | Made in USA
  • ✔ IMPROVE THE LOOK OF YOUR X5: This is not a one size fits all. We tested hundreds of configurations on vehicle models to be compatible with BMWeBay logo X5 [G05] (2019-2026) including the BMWeBay logo X5 M/M-Competition, but NOT THE 2019-2023 M50i or 2019-2023 xDrive40i with optional M-Sport Bumper Package.
  • ✔ EASY TO REMOVE: This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off, leaving no trace that it was ever there.
  • ✔ NO DRILLING, NO RISKS: The Platypus utilizes the existing tow eye in your bumper, so you do not have to drill any holes in your new car. This method of installing the front plate is common and legal in all states that require front license plates.
  • ✔ BUILT TO LAST FOREVER: The Platypus plate is machined from 6061 aluminum with a durable black powder-coat finish that will not rust, fade, or bend.
  • ✔ MADE IN USA: Each Platypus is made here in the US of A. They are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!

Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...