October 15, 2019 NHTSA CAMPAIGN NUMBER: 19V733000
Incorrect Placement of Conspicuity Tape
Reduced visibility increases the risk of a crash.
NHTSA Campaign Number: 19V733
Manufacturer PACCAR
Incorporated
Components VISIBILITY
Potential Number of Units Affected 248
Summary
PACCAR
Incorporated (PACCAR
) is recalling certain 2020 Peterbilt
579 vehicles equipped with a sleeper box. The conspicuity tape may have been installed in the incorrect location, affecting the vehicle’s visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
PACCAR
will notify owners, and dealers will install additional conspicuity tape on back of sleeper in correct location, free of charge. The recall began November 4, 2019. Owners may contact PACCAR
customer service at 1-940-591-4220. PACCAR
’s number for this recall is 19PBE.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Federal Recall Information
19PBE
Supplier
Description
Safety Recall – Back of Sleeper Reflective Conspicuity Tape Location
What’s New
Safety Recall – Back of Sleeper Reflective Conspicuity Tape Location
Release Date
11/4/2019
Introduction
Peterbilt
Motors Company has determined that a regulatory non-compliance, may exist in certain model 579 vehicles manufactured between 8/26/2019 and 9/12/2019. On certain trucks, the reflective conspicuity tape on the back wall of the sleeper box was installed in incorrect locations. FMVSS 108 Section S8 2.4.2 regulations require the conspicuity tape to be placed in specific areas. A truck that does not have properly placed conspicuity tape may be less visible to others and could create an increased risk of a crash. Vehicles operating without a trailer may be cited for incorrect tape location and fail an annual truck inspection.
Resolution
Safety Recall
Service all chassis affected that enter your dealership, even if the customer has no issue with the chassis.
- Review the attached chassis list for your dealer code and schedule your customer(s) for service if their chassis is on the list.
- If you are not using Service Management to start repair orders, review SIR for “Complete” or “In Process” next to the 19PBE campaign code prior to performing this repair.
- Follow the procedures below to remove and replace the reflective conspicuity tape.
It is a violation of Federal law for a dealer to sell or lease new vehicles covered by this recall until the defect or noncompliance has been corrected.
Warranty
There is no time or mileage limit for this recall. Peterbilt
will pay for parts at dealer net plus applicable mark up and labor:
- 3 hours to inspect the location of the reflective conspicuity tape. Use Quick Claim Code 19PBE.
- This labor is for inspection only. It is not applicable for trucks that require the tape installed in the correct location.
- 3 hours to install new tape in the correct location. Use Quick Claim Code 19PBEP.
- File an additional claim for extraordinary circumstances, referencing 19PBE. File an additional claim for extraordinary circumstances. A quick claim for standard labor must be filed first.
| For Field… | Enter… |
| Failure Location | 002-015-008 |
| Failure Type | 705 |
| Claim Type | C |
| Labor:
002-A90 | 0.3 hours to install the new Reflective Conspicuity Tape in the correct location – includes time to remove the old tape if desired. |
Take off parts disposition: Destroy parts 30 days after the claim has been paid.
Parts
| Quantity | Part Number | Description |
| 4 | 051138-67638 | White Reflective Tape 2”x12” |
Procedure
- Refer to Figure 1 and inspect the location of the Reflective Conspicuity Tape.
- If the tape is located in the inboard location, continue to the next step. Removal of the tape in the inboard location is not required. If the tape is removed, use an adhesive cleaner that is appropriate for use on painted surfaces to remove the tape residue.
- Clean the new installation surface and install the new tape in the outboard location as shown in Figure 1.
Figure 1
Attachments
Chassis List
Customer Letter – US
Customer Letter – Canada
Customer Letter – Canada (French)
Authored by: PR
IMPORTANT SAFETY RECALL
November 12, 2019
Subject: Safety Recall 19PBE – Back of Sleeper Reflective Conspicuity Tape Location
NHTSA ID: 19V733
EXPIRATION
DATE: NONE
This notice applies to your vehicle. Your VIN(s) can be found on the bottom or back of this page.
Dear Peterbilt
Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Peterbilt
has decided that certain Model 579 vehicles manufactured between 8/26/2019 and 9/12/2019 fail to conform to Federal Motor Vehicle Safety Standard No. 108: Lamps, Reflective Devices, and Associated Equipment. Reflective conspicuity tape may have been installed incorrectly on the sleeper box back wall of certain vehicles. A truck that does not have properly placed conspicuity tape may be less visible to others and could create an increased risk of a crash. Tractors operating without a trailer may be cited for incorrect tape location or fail an annual truck inspection.
| What is the problem? | Conspicuity tape on the sleeper box back wall may have been incorrectly installed. |
| What will your dealer do? | Inspect the location of the existing conspicuity tape and install new tape, if necessary. |
| What should you do? | Contact your Peterbilt |
Peterbilt
Motors Company has initiated this recall to remedy this issue with no charge to you. Please contact your Peterbilt
dealer to schedule an appointment for these services. To find your Peterbilt
dealer, please visit the Dealer Locator at www.Peterbil t.com or scan the QR code . This repair may take up to 1 hour of labor depending on dealer scheduling.
If you had this repair performed before receiving this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. Receipts for parts and/or labor are required for consideration of reimbursement.
If you require further information about this recall, reimbursement of a pre-notification remedy associated with this recall, or experience any difficulty in making arrangements for this repair, please contact: Peterbilt
Motors Company, 1700 Woodbrook St, Denton, TX 76205, Attn: Customer Services Department, phone 940-591-4220.
If you conclude that Peterbilt
has not enabled you to remedy this defect in a reasonable time and without charge, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E.,
Washington, DC 20590, or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-8 00-424-9153); or go to https://www.safercar.gov.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. If you no longer own this vehicle, we would appreciate you advising us of the new owner if you know their name.
We apologize for any inconvenience this preventive procedure may cause and thank you for your participation in helping Peterbilt
provide the highest levels of customer satisfaction and service expertise.
We value your business and appreciate your ongoing loyalty to Peterbilt
and its dealer network . Industry-leading quality, performance and reliability are hallmarks of Peterbilt
products , and we thank you for making Peterbilt
your truck of choice.
Sincerely,
Michelle Ponsonby
Director of Customer Service
Peterbilt
Motors Company
Scan this QR code to open the Peterbilt
Dealer Locator
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| PETERBILT | 579 | 2020 |
7 Associated Documents
Recall Quarterly Report #2, 2020-1
RCLQRT-19V733-6615.PDF 211.228KB
Manufacturer Notices(to Dealers,etc)
RCMN-19V733-3642.pdf 575.014KB
Owner Notification Letter(Part 577)
RCONL-19V733-3874.pdf 260.315KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V733-2913.PDF 211.132KB
Recall Acknowledgement
RCAK-19V733-7469.pdf 244.701KB
Non-Compliance Notice 573 Report
RCLRPT-19V733-4243.PDF 212.866KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V733-0212.PDF 211.32KB
Latast Recalls Documents
- Enhance Safety: Our round safety reflectors provide enhanced visibility and safety for driveways, roads, and parking lots
- Endurance Materials: Made from high-quality plastic, our reflector is built to last, providing long-lasting performance even in harsh weather conditions
- Easy Installation: With 2 convenient mounting holes, our reflector can be easily attached to posts, trailers, gates, and more, providing additional safety and visibility
- Waterproof and Sealed: Our reflector is designed with excellent waterproofing capabilities and a tight seal, ensuring its effectiveness and durability even in wet environments
- Versatile Use: Ideal for a wide range of applications, including post reflectors, trailer reflectors, and gate reflectors, our Oval Reflector is a versatile and reliable choice
- [Enhanced Visibility]: MaxxHaul Reflectors provide instant visibility for vehicles, trailers, RVs, campers
, and hitch-mounted accessories like bike racks or cargo carriers. They ensure your vehicle can be seen from up to 100 feet away, enhancing safety during both day and night. - [Versatile Installation Options]: Each reflector comes with pre-drilled mounting holes for secure, permanent installation. Alternatively, the self-adhesive backing allows for quick and easy placement on any flat surface without tools.
- [Compact and Durable Design]: Measuring 4-3/8" x 2", these oval reflectors are crafted from durable materials to withstand the elements. Their universal fit makes them suitable for a wide range of applications, from trailers to trucks and more.
- [DOT-Compliant for Safety]: This 8-pack includes 4 amber and 4 red reflectors, all of which meet DOT standards for vehicle reflectors. Designed for safety and compliance, these reflectors are perfect for ensuring visibility on the road.
- Provides Visibility: in the dark, the bright reflector has a clear reflection when light lays it on, which is a helpful accessory for trailers, trucks, campers
, cargo carts and other vehicles - Easy to Mount: a central mounting hole is on the safety reflectors (screws are not included), ensuring a solid installation and easy to disassemble when it is needed
- Waterproof Material: the highly reflective and reliable plastic material is adopted, featuring waterproof and good sealing, and preventing water drips from penetrating inside so that it has a lasting period for using
- Safety Reflector: reflectors have a wide application in daily life, including vehicles, mailboxes, trash cans, posts, wooden piles, houses, walls, gates and so on, giving a cue signal so that it provides safety for the driver at night; The reflected light is uniform and not dazzling
- Adequate Quantity: you will receive 10 driveways reflectors, sufficient quantity to meet your daily needs, you can also share with family members and friends to use
- Package Contents: each pack contains 16 circular reflectors, the color is red, the quantity is sufficient, the color is prominent enough to meet your usage needs
- Easy to Install: there is a mounting hole in the center of the reflector for screw mounting (screw not included), it can be quickly and easily installed on any flat surface, ensuring it can fit and easy removal or keep the wall dry and clean, tear off the adhesive backing protective film, stick the reflector in place for 24 hours
- Wide Range of Uses: reflectors have a wide range of applications in daily life, suitable for trailers, RVs, campers
and other vehicles as well as boats, agricultural machinery, mailboxes, driveway property marking posts, stakes, houses, walls, Doors, bicycles, motorcycles, etc., suitable for indoor and outdoor use - Quality Material: made of highly reflective, reliable and durable plastic material, with waterproof performance, good waterproof sealing, preventing water droplets from seeping into the interior, and long service life, these reflectors have strong reflective properties, which increases safety and visibility sex, each reflector is 6 cm/ 2.36 inches in diameter
- What the Product Does: the safety reflector provides visibility and signal, in the dark, when the light hits, the reflector has a bright and clear reflection; you can see your lane more clearly at night or in any weather for safe driving, ideal for marking driveways and curbs for snow removal
- 【Package Contents】12 pcs Mirror Reflective bird deterrent ,4 pcs 360 ° swivel hooks,12 pcs small hooks.3D mirror reflection design that produces light reflection and flicker effects in sunlight pigeon deterrents for outside,scare birds away keep birds away.
- 【Quality material】The bird scare devices set is made of high-quality stainless steel and is precisely manufactured using multi-layer laser cutting technology,Durable 、beautiful and good reflective performance,bird scare,crow deterrent,bird window strike prevention.
- 【360° bird scare】animal deterrent devices outdoor The bird reflectors equipped with a 360 ° swivel hook can freely rotate in the wind and has a bird repelling effect in any direction effectively intimidating swallows, woodpeckers, pigeons, sparrows, crows, seagulls, etc,To protect your garden, farm or outdoor space from invading birds.
- 【Easy to Assemble】bird deterrents wind spinner is very easy to install.According to the instructions we provide,remove the protective film from each wind spin surface,rotate it to the appropriate angle,and finally connect the bird scare discs together with a 360 ° swivel hook and small hook.You can combine bird deterrents to create a variety of decorative effects
- 【Application】bird deterrents suitable for decorating various occasions such as Christmas, birthdays,weddings,Mother's Day,Father's Day, Thanksgiving, and Valentine's Day,It's an ideal solution for protecting gardens,patios,orchards,crops,pools,boats,cars, and other valuable assets from avian intrusion.
Last update on 2026-05-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





