January 15, 2020 NHTSA CAMPAIGN NUMBER: 20V015000
Side Stand Spring May Fracture
An engine stall increases the risk of a crash.
NHTSA Campaign Number: 20V015
Manufacturer Triumph
Motorcycles America, LTD
Components STRUCTURE
Potential Number of Units Affected 3,244
Summary
Triumph
Motorcycles America, LTD (Triumph
) is recalling certain 2016-2018 Thruxton, 2016-2019 Thruxton R and 2020 Thruxton TFC motorcycles. The side stand spring may fracture, possibly allowing the side stand switch to activate and shut off the engine.
Remedy
Triumph
will notify owners, and dealers will replace the side stand spring, free of charge. The recall began February 24, 2020. Owners may contact Triumph
customer service at 1-678-854-2010. Triumph
’s number for this recall is SRAN 570.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Safety Recall Action Notice 570
Issue 1 – 01.2020
| Subject: Side Stand Spring Replace | ||||
| Notice Number | Models Affected | VIN Range | Markets Affected | |
| 570 | Thruxton 1200, Thruxton 1200 (Dual Seat), Thruxton 1200R, Thruxton 1200R (Dual Seat), Thruxton TFC | From | 740405 | All markets |
| Up to | 959980 | |||
Background Information
Internal investigations have identified a need to replace the side stand spring on the above models. Dealers are requested to replace the side stand spring as described in the instructions below.
Customer Contact Instructions
| Notice |
| STOP DELIVERY OF AFFECTED MOTORCYCLES IMMEDIATELY.
DO NOT deliver a motorcycle affected by this Safety Recall Action Notice to a customer until you have completed, or confirmed completion of, the procedures described in this Safety Recall Action Notice. Delivering a motorcycle subject to an outstanding Safety Recall Action Notice may contravene local or national laws in your market, territory or country. |
Triumph
subsidiaries and distributors must instigate a Safety Recall Action in their country in accordance with the national recall code of practice. For vehicles in dealer stock, the safety recall MUST be actioned before delivery to the customer.
Dealers are to prioritise repair of customer owned motorcycles before any unsold motorcycles.
Identification of Affected Motorcycles
Thruxton models listed in the VIN range above.
Note:
- Some affected motorcycles listed in the VIN range will have been modified and repaired by Triumph
prior to their release from the factory. - Unmodified motorcycles can be identified by checking the ‘VIN Enquiry’ on www.triumphonline.net.
Warranty Claim Instructions
| Notice Number | Fault Code | Repair Code | Description | Repair Allowance Time |
| 570 | 020840970 | 99570 | SB570 – Remove and replace side stand spring | 0.08 Hours |
Genuine Parts Information
| Notice Number | Part Number | Part Description | Quantity |
| 570 | T2083537 | Spring, side stand | 1 |
Parts Ordering Instructions
For Triumph
Subsidiary and Overseas Distributor dealers using Triumph
Warranty On-Line with Parts Auto Ordering Flag switched on: Order all repair parts by submitting a New Prior through the Warranty OnLine system. Entering the above repair code in a New Prior will automatically add the parts required and labour times for this Safety Recall Action Notice.
For Overseas Distributor dealers NOT using Triumph
Warranty On-Line or for Overseas Distributor dealers using Triumph
Warranty On-Line with Parts Auto Ordering Flag switched off: Orders should be placed using the normal parts ordering procedure.
Genuine Parts Return
Dealer to retain parts for 90 days. All parts must be stored in a secure, non-public accessed area and correctly identified with a completed warranty label. Thereafter the parts must be rendered unusable prior to scrapping.
Side Stand Spring Replacement
| Warning |
| Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling. An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle. |
| Warning |
| If the motorcycle has recently been running, some components may be hot to the touch. Contact with the hot components may cause damage to exposed skin. To avoid skin damage, always allow the hot parts to cool before working on the motorcycle. |
| Warning |
| Wear hand, eye and face protection when unhooking the stand spring. Take great care to minimise the risk of personal injury and loss of components. |
- Raise and support the motorcycle.
- With the side stand in its retracted position as shown below, unhook the spring from the side stand noting the spring hook orientation, and remove it from the motorcycle.
- In the same orientation as the original spring, hook the new side stand spring and rubber sleeve onto its retainer peg then carefully hook it onto the side stand lug. Do not remove the rubber sleeve.
- Check the operation of the side stand. Ensure the spring holds the stand securely in the retracted position.
- Lower the motorcycle to the ground and park it on the side stand.
Other Instructions
Once completed, please mark the Service Record Book that the requirements of this Safety Recall Action Notice have been complied with.
Before returning the motorcycle to the customer, download the latest calibration to the engine electronic control module, chassis electronic control module (if fitted), keyless electronic control module (if fitted) and instruments (if applicable) using the current version of the Triumph
diagnostic software.
24th February 2020
! IMPORTANT SAFETY RECALL !
REPLACEMENT SIDE STAND SPRING TO PREVENT ENGINE STALL
| Safety Recall: | SRAN570 |
| NHTSA Recall: | 20V015 |
This notice applies to your motorcycle:
Model: 2016 to 2020 – Thruxton, Thruxton R, and Thruxton TFC
VIN: SMTXX
Dear [NAME F&L]:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Triumph
Motorcycles Ltd. has decided that a defect which relates to motor vehicle safety exists in your motorcycle, with the VIN shown above. Accordingly, Triumph
Motorcycles America Ltd. is conducting a safety recall to address the condition.
| The reason for this recall notice: | The side stand spring may fracture whilst the motorcycle is being ridden resulting in an engine stall. An engine stall without warning may increase the risk of a crash. |
| What Triumph | Triumph |
| What you must do to ensure your safety: | Please make an appointment with your authorized Triumph Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within 10 days. |
| If you need help: | Please contact your authorized Triumph any difficulty regarding this recall. In the event your dealer is unable to remedy your motorcycle, please contact Triumph |
If an authorized Triumph
dealer or Triumph
Motorcycle America Ltd fails or is unable to perform this remedy without charge within a reasonable amount of time, you may contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
If you no longer own the motorcycle listed above, please contact Triumph
at 1-678-854-2010 and provide any information you can furnish that will assist us in locating the new owner.
We apologise for any inconvenience this may cause you. However, we have taken this action in the best interest of your safety and your continued satisfaction with your Triumph
motorcycle. We appreciate your attention and cooperation in this important matter.
Sincerely
Triumph
Motorcycles America Ltd.
2/17/2020
TriumphOnline | Notice
TOL Ref. # 13667-SVC
Safety Recall Action 570 – Thruxton Side Stand Spring
Triumph
Motorcycles has initiated a voluntary safety recall affecting a specific VIN range of the below-referenced Triumph
Thruxton, Thruxton R and Thruxton TFC models. Please consult the attached Safety Recall Action Notice 570 PDF immediately for complete instructions.
Internal investigations have identified a need to replace the side stand spring on the below listed models. Dealers are requested to replace the side stand spring as per the instructions attached.
We require your immediate attention to rectify the following machines:
WHAT IS THE PROBLEM?
The side stand spring may fracture with the side stand leg in its rest (up) position. The leg may swing downwards, engaging the side stand switch thereby creating an engine stall. Engine stalls increase the risk of a crash.
WHAT WILL TRIUMPH
DO?
To address this condition, Triumph
is launching a new recall as described in Safety Recall Action Notice 570.
All arrangements for updating of our computer systems has now been completed.
Notification letters to current customers are targeted to be mailed commencing February 24 explaining the action. Customers will be advised to return their bike to a Triumph
dealer to have the modification carried out free of charge.
WHAT SHOULD YOU DO?
Triumph
Dealers should take the following actions:
- It is imperative that any owner who has purchased an affected machine be contacted by you immediately and asked to return the machine for modification.
- Quarantine all unsold stock (including stock for sale on your website and with 3rd parties) and arrange modification as per Safety Recall Action Notice 570 prior to any further deliveries to customers.
- Owners of machines outside of the affected VIN range are not connected with this action and may therefore require reassurance.
- Some VINs affected by this Safety Recall Action Notice may also require other bulletin or Safety Recall Action Notice work to be carried out. Please use the above-described system tools to identify all outstanding bulletins or notices and make arrangements to carry out these repairs at the same time.
- This action is likely to increase visitor traffic to your showroom and service areas. Please ensure all arrangements are made to best accommodate them.
U.S. law prohibits the delivery of a recalled motorcycle under a sale or lease until the remedy has been performed.
We apologize for the inconvenience this may cause, but we are taking this action in the interest of our customers’ personal safety and satisfaction with our products. We thank you in advance for your anticipated cooperation.
If you have any additional questions regarding Safety Recall Action Notice 570, please contact Triumph
Customer Support at (888) 284-6288.
8 Affected Products
Vehicles
11 Associated Documents
Recall 573 Report – Amendment 2
RCLRPT-20V015-4860.PDF 214.033KB
Recall Quarterly Report #1, 2020-1
RCLQRT-20V015-4165.PDF 211.136KB
Recall 573 Report – Amendment 1
RCLRPT-20V015-6580.PDF 214.01KB
Recall Acknowledgement
RCAK-20V015-6380.pdf 286.741KB
Defect Notice 573 Report
RCLRPT-20V015-5315.PDF 213.745KB
Remedy Instructions and TSB
Manufacturer Notices(to Dealers,etc)- SAFETY RECALL ACTION 570 – THRUXTON SIDE STAND SPRING
RCMN-20V015-3142.pdf 125.028KB
Owner Notification Letter(Part 577)
RCONL-20V015-9822.pdf 106.338KB
Recall Quarterly Report #3, 2020-3
RCLQRT-20V015-4958.PDF 211.319KB
Recall Quarterly Report #2, 2020-2
RCLQRT-20V015-8173.PDF 211.238KB
Miscellaneous Document – Email Campaign
RMISC-20V015-5415.pdf 195.597KB
Latest Recalls Documents
- [Maintenance Stand] Cleaning and lubricating the chain is not only visual, but also improves performance and fuel efficiency by reducing drag. It also prolongs the life of the chain and reduces the time and cost of replacement.
- [Kaedear Grip Stand] Because of the simplicity of the structure, there were only simple and unreliable products available on the market. We designed this product for enthusiasts who wants to have quality tools and parts to enjoy their hobby. That's why the Kaedear grip stand, also known as the maintenance stand, blends functionality with design.
- [Concept 1] The grip is the heart of any handheld tool. High-end screwdrivers are designed with grip shapes that make it easy to apply force and turn, allowing you to loosen bolts that regular screwdrivers cannot. At Kaedear, we named it the "Grip Stand" and crafted the center of the body with an ergonomic grip shape for optimal handling.
- [Concept 2] The finer the stroke of a tool, the better. In maintenance, inserting a screwdriver into a hole to turn it is actually a prohibited action, and in competitions, it’s marked as a dangerous act, leading to point deductions. This method also requires a 180-degree rotation, making it hard to apply force, often resulting in higher effort to turn heavy components. To solve this, we designed hex points on the top and bottom of the body, enabling 60-degree adjustments with a wrench. This design allows for better leverage, making it easier to lift with less effort. By adding a speed wrench or a plate ratchet, you can further enhance your experience for smooth and efficient operation.
- [Visual and Safety Features] A bright color not only helps prevent tools from being left behind but also makes it easier for others to notice the vehicle's condition. We have added an eye-catching red color option for both the brake holder and grip stand.
- [Universal Design] Because the tripod has 3 sizes of Plug, it is suitable for 3 motorbike internal diameters. They are 18 mm, 14.5 mm, and 11 mm respectively
- [Application] The triangle stand is both a general kickstand and an auxiliary repair tool holder when servicing the motorcycle, plug-and-play Jiffy Stand
- [Material] Steel
- [Triangular Structure] In order to better support the motorcycle and prevent bending or instability due to the heavy weight of the motorcycle, our dirt bike triangle stand adopts a triangular structure, which is the most stable geometric structure
- [Package] 1 x Dirt bike triangle stand
- ★This Motorcycle Wheel Lift Stand is small and easy to carry to Solve the problems of traditional lifting stands that are bulky and difficult to carry.★ As long as a Small Foldable Pole can support the front or rear wheels of a motorcycle, helping you repair the motorcycle
- ★Easy to carry (retractable, shrink length 22cm), you can put it in your bag and take it out anytime, anywhere,but the maximum length can reach 41cm, which can help your motorcycle rise to a high distance
- ★High-quality aluminum and iron structure, black surface spray treatment, protect the lift stand, will lift all sports bikes
- ★Provide a telescopic belt to help you tighten the brakes to prevent the wheels from slipping
- ★The newly designed second-generation motorcycle lift adds a retractable compression rod, which allows you to easily support the motorcycle. The motorcycle trail stand makes you consume less power than the first-generation motorcycle trail stand.
- [Maintenance Stand] Cleaning and lubricating the chain is not only visual, but also improves performance and fuel efficiency by reducing drag. It also prolongs the life of the chain and reduces the time and cost of replacement.
- [Kaedear Grip Stand] Because of the simplicity of the structure, there were only simple and unreliable products available on the market. We designed this product for enthusiasts who wants to have quality tools and parts to enjoy their hobby. That's why the Kaedear grip stand, also known as the maintenance stand, blends functionality with design.
- [Concept 1] The grip is the heart of any handheld tool. High-end screwdrivers are designed with grip shapes that make it easy to apply force and turn, allowing you to loosen bolts that regular screwdrivers cannot. At Kaedear, we named it the "Grip Stand" and crafted the center of the body with an ergonomic grip shape for optimal handling.
- [Concept 2] The finer the stroke of a tool, the better. In maintenance, inserting a screwdriver into a hole to turn it is actually a prohibited action, and in competitions, it’s marked as a dangerous act, leading to point deductions. This method also requires a 180-degree rotation, making it hard to apply force, often resulting in higher effort to turn heavy components. To solve this, we designed hex points on the top and bottom of the body, enabling 60-degree adjustments with a wrench. This design allows for better leverage, making it easier to lift with less effort. By adding a speed wrench or a plate ratchet, you can further enhance your experience for smooth and efficient operation.
- [Visual and Safety Features] A bright color not only helps prevent tools from being left behind but also makes it easier for others to notice the vehicle's condition. We have added an eye-catching red color option for both the brake holder and grip stand.
- 100% Brand new and high quality.
- Suitable for most motorcycles on the market,Adjustment Design The adjustable bracket allows you to shorten the kickstand while lowering your vehicle without having to worry about replacing stock support
- Non-slip Design The bottom of the motorcycle stand is threaded for non-slip standing, which enhances the friction with the ground and strong grip, keep your motorbike at the right angle to.
- Durable CNC aluminum alloy motorcycle side bracket made of high quality aluminum, anodized, not easy to rust, wear, high strength, corrosion resistance, durable.
- Please check the picture size carefully before buying
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





