April 14, 2020 NHTSA CAMPAIGN NUMBER: 20V214000
Reflective Tape May be Partially Covered/FMVSS 108
The vehicle’s rearward visibility may be reduced, increasing the risk of a crash.
NHTSA Campaign Number: 20V214
Manufacturer Daimler Trucks
North America LLC
Components EXTERIOR LIGHTING
Potential Number of Units Affected 63,175
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle’s visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL848.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
Daimler Trucks
North America LLC
Recall Campaign
May 2020
FL848A
NHTSA #20V-214
Transport Canada #2020-158
Subject: Mud Flap Reflective Tape
Models Affected: Specific Model Year 2006-2021 Freightliner 122SD, Argosy, Business Class M2, Cascadia, Century Class, Classic, Columbia, Coronado, and FLD vehicles; Western Star 5700 vehicles; and Sterling A9500 and AT9500 vehicles manufactured April 14, 2005, through March 27, 2020.
General Information
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division and wholly owned subsidiaries, Western Star Truck Sales, Inc., and Sterling Trucks Corporation, has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above.
On certain vehicles, the rear reflective tape on the mud flaps may be partially covered by the mud flap hanger bracket, which may result in noncompliance with conspicuity tape requirements of FMVSS 108; Lamps, reflective devices, and associated equipment. This may reduce visibility to other drivers, increasing the risk of a crash.
The reflective tape located on the rear face of the rear mud flaps will be inspected for proper installation, and if necessary, removed and reinstalled.
There are approximately 64,048 vehicles involved in this campaign.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.
Work Instructions
Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a completion sticker (Form WAR260).
Replacement Parts
No Replacement parts are required.
If our records show your dealership has ordered any vehicle(s) involved in campaign number FL848, a list of the customers and vehicle identification numbers will be available on DTNAConnect.
Removed Parts
U.S. and Canadian Dealers, please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts. Export distributors, please destroy removed parts unless otherwise advised.
Labor Allowance
Table 1 – Labor Allowance
| Campaign Number | Procedure | Time Allowed (hours) | SRT Code | Corrective Action |
| FL848A | Inspect reflective tape on mud flap | 0.1 | 996-R090A | 06-Inspect |
| Inspect reflective tape on mud flap, remove, and reinstall | 0.3 | 996-R09B | 12-Repair Recall/Campaign |
Table 1
IMPORTANT: When the Recall has been completed, locate the base completion label in the appropriate location on the vehicle, and attach the red completion sticker provided in the recall kit (Form WAR260). If the vehicle does not have a base completion label, clean a spot on the appropriate location of the vehicle and first attach the base completion label (Form WAR259). If a recall kit is not required or there is no completion sticker in the kit, write the recall number on a blank sticker and attach it to the base completion label.
Claims for Credit
You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting your claim through the Warranty system within 30 days of completing this campaign. Please reference the following information in OWL:
- Claim type is Recall Campaign.
- In the Campaign field, enter the campaign number and appropriate condition code (FL848-A).
- In the Primary Failed Part Number field, enter 25-FL848-000. In the Labor field, first enter the appropriate SRT from the Labor Allowance Table. Administrative time will be included automatically as SRT 939-6010A for 0.3 hours.
- The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign.
- U.S. and Canada — Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the following:
- Accept the documentation of the previous repair.
- Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement. (See the “Copy of Owner Letter” section of this bulletin for reimbursement guidelines.)
- Submit an OWL Recall Pre-Approval Request for a decision.
- Include the approved amount on your claim in the Other Charges section.
- Attach the documentation to the pre-approval request.
- If approved, submit a based on claim for the pre-approval.
- Reimburse the customer the appropriate amount.
IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has not been previously completed. Also, check for a completion sticker prior to beginning work.
U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at DTNAConnect.com / WSC, if you have any questions or need additional information. Export distributors, submit a Web inquiry or contact your International Service Manager.
U.S. and Canadian Dealers: To return excess kit inventory related to this campaign, U.S. dealers must submit a Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing PDC. All kits must be in resalable condition. PAR requests must include the original purchase invoice number. Export Distributors: Excess inventory is not returnable.
The letter notifying U.S. and Canadian vehicle owners is included for your reference.
Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code, Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors and retail outlets within five working days.
Copy of Notice to Owners
Subject: Mud Flap Reflective Tape
For the Notice to U.S. Customers: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. For the Notice to Canadian Customers: This is to inform you that your vehicle may be non-compliant with the requirements of the Motor Vehicles Safety Regulations and that the non-compliance could affect the safety of a person.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division and wholly owned subsidiaries, Western Star Truck Sales, Inc., and Sterling Trucks Corporation, has decided that a defect that relates to motor vehicle safety exists on Freightliner 122SD, Argosy, Business Class M2, Cascadia, Century Class, Classic, Columbia, Coronado, and FLD vehicles; Western Star 5700 vehicles; and Sterling A9500 and AT9500 vehicles manufactured April 14, 2005, through March 27, 2020.
On certain vehicles, the rear reflective tape on the mud flaps may be partially covered by the mud flap hanger bracket, which may result in noncompliance with conspicuity tape requirements of FMVSS/CMVSS 108; Lamps, reflective devices, and associated equipment. This may reduce visibility to other drivers, increasing the risk of a crash.
The reflective tape located on the rear face of the rear mud flaps will be inspected for proper installation, and if necessary, removed and reinstalled.
Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at www.Daimler-TrucksNorthAmerica.com. On the menu tab, select “Contact,” scroll down to “Find a Dealer,” and select the appropriate brand. The Recall will take approximately one half hour and will be performed at no charge to you. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com: 48518/VinLookup/vin-module/getVinLookupPage
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address [email protected]. For the Notice to U.S. Customers: If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the
Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov. For the Notice to Canadian Customers: If you wish to submit a complaint about this recall, you can contact Transport Canada road safety, 80 rue Noel, Gatineau, Quebec J8Z 0A1 or call (800) 333-0510.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair
- The Vehicle Identification Number (VIN) of the vehicle that was repaired
- What problem occurred, what repair was done, when the repair was done
- Who repaired the vehicle
- The total cost of the repair expense that is being claimed
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt) Reimbursement will be made by check from your Daimler Trucks North America LLC dealer.
Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter.
Work Instructions
Subject: Mud Flap Reflective Tape
Models Affected: Specific Model Year 2006-2021 Freightliner 122SD, Argosy, Business Class M2, Cascadia, Century Class, Classic, Columbia, Coronado, and FLD vehicles; Western Star 5700 vehicles; and Sterling A9500 and AT9500 vehicles manufactured April 14, 2005, through March 27, 2020.
Reflective Tape – Inspect, Remove, and Reinstall
- Check the base label (Form WAR259) for a completion sticker for FL848 (Form WAR260) indicating this work has been done. The base label is usually located on the passenger-side door about 12 inches (30 cm) below the door latch. If a completion sticker is present, no work is needed. If a completion sticker is not present, continue with the next step.
- Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires.
- Inspect the reflective tape.
Is the reflective tape covered by the mud flap hanger?
YES → Go to next step.
NO → If the visible width of the reflective tape is greater than or equal to 2 inches (50 mm), no further work is required. See Fig. 2. Proceed to step 7.
- Secure the mud flap and the reflective tape bracket from falling, then remove the fasteners that attach the mud flap and the reflective tape bracket to the mud flap hanger. See Fig. 1.
| 05/07/2020 f311259A. Reflective tape visible width. | |
| 1. Mud Flap Hanger | 3. Fasteners |
| 2. Bracket, Reflective Tape | 4. Mud Flap |
Fig. 1, Incorrect Installation, Reflective Tape Bracket
| 04/30/2020 f311260A. Reflective tape width should be greater than or equal to 2 inches (50 mm). | |
| 1. Mud Flap Hanger | 3. Fasteners |
| 2. Bracket, Reflective Tape | 4. Mud Flap |
Fig. 2, Correct Installation, Reflective Tape Bracket
- Remove the reflective tape bracket from the vehicle.
- Place the reflective tape bracket on the outside of the mud flap hanger, and install the fasteners. See Fig. 2.
- Clean a spot on the base label (Form WAR259), write recall number FL848 on a blank red completion sticker (Form WAR260), and attach it to the base label.
Daimler Trucks
North America LLC
May 2020
FL848A
NHTSA #20V-214
IMPORTANT SAFETY RECALL
See enclosed VIN list
Subject: Mud Flap Reflective Tape
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, and wholly owned subsidiaries, Western Star Truck Sales, Inc., and Sterling Truck Corporation, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2006-2021 Freightliner 122SD, Argosy, Business Class M2, Cascadia, Century Class, Classic, Columbia, Coronado, and FLD vehicles; Western Star 5700 vehicles; and Sterling A9500 and AT9500 vehicles manufactured April 14, 2005, through March 27, 2020.
On Certain vehicles, the rear reflective tape on the mud flaps may be partially covered by the mud flap hanger bracket, which may result in noncompliance with conspicuity tape requirements of FMVSS 108; Lamps, reflective devices, and associated equipment. This may reduce visibility to other drivers, increasing the risk of a crash.
The reflective tape located on the rear face of the rear mud flaps will be inspected for proper installation, and if necessary, removed and reinstalled. Repairs will be performed by Daimler Trucks North America authorized service facilities.
Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at
Daimler-TrucksNorthAmerica.com/Contact-us. Scroll down to “Locate a Dealer” and select the appropriate brand. The Recall will take approximately one half hour and will be performed at no charge to you. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vinmodule/getVinLookupPage .
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address [email protected]. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair.
- The Vehicle Identification Number (VIN) of the vehicle that was repaired.
- What problem occurred, what repair was done, when the repair was done.
- Who repaired the vehicle.
- The total cost of the repair expense that is being claimed.
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).
Reimbursement will be made by check from your Daimler Trucks North America LLC dealer.
Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter
SEOCONTENT-START
Defect Information Report
(Section 573.6)
FL-848
Date of Submission: April 14, 2020
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: ⃝ Safety Defect X Non-Compliance
Vehicle Information
Model Yr. Start: 2006 Model Yr. End: 2021
Make: Freightliner, Western Star, Sterling
Model: Century Class, Columbia, Business Class M2, Classic, FLD, Argosy, Coronado, Cascadia, 122SD, 5700, A9500, AT9500
Production Dates: Begin: 04/14/2005
End: 03/27/2020
Descriptive Information:
On certain vehicles, the rear retroreflective sheeting is partially covered by the mudflap hanger bracket (more than 38 mm of the required 50 mm remain visible).
Number potentially involved: 63,175 Estimated percentage of involve with defect: 100%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On the affected vehicles, the rear retroreflective sheeting may be partially covered by the mudflap hanger bracket (more than 38 mm of the required 50 mm remain visible). Tractors as defined in FMVSS 108; Lamps, Reflective devices and associated equipment require retroreflective sheeting width of 50mm for grade DOT-C2 material, and as such these vehicles may not meet the requirements. DTNA has no indication of accidents or any other problems as a result of this noncompliance.
If a noncompliance, provide the applicable FMVSS:
FMVSS 108
Describe the safety risk:
A noncompliance with conspicuity tape requirements of FMVSS 108 may cause the vehicle’s visibility to other drivers to be reduced, increasing the risk of a crash
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision.:
February 2020, DTNA received a notification of a vehicle failing DOT inspection due to partially covered conspicuity tape. DTNA opened an investigation to determine the root cause and to identify potential field exposure. March 2020, Investigation revealed that the work instructions did not specify correct installation of the reflector bracket, and identified that it was therefore possible to assemble the bracket in such a way that I could partially obscure the reflective tape. Further investigation was conducted to identify affected manufacturing facilities and population of affected vehicles. April 6, 2020, DTNA decided to conduct a voluntary non-compliance recall on the vehicles equipped with certain mudflap hanger brackets.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for reimbursement.
The reflective tape will be inspected to ensure that it is completely visible and moved if required. Repairs will be performed by Daimler Trucks North America authorized service facilities. Copies of the reimbursement plan will be submitted as a supplemental report when available.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected.
Planned Dealer Notification Begin Date: 06/12/2020
Planned Dealer Notification End Date: 06/12/2020
Planned Owner Notification Begin Date: 06/12/2020
Planned Owner Notification End Date: 06/12/2020
Manufacture’s identification code for this recall (if applicable): FL-848
DTNA Representative;
Andy Jones
Manager
Compliance and Regulatory Affairs
86 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FREIGHTLINER | 122SD | 2014-2021 |
| FREIGHTLINER | ARGOSY | 2006 |
| FREIGHTLINER | BUSINESS CLASS M2 | 2006-2021 |
| FREIGHTLINER | CASCADIA | 2008-2021 |
| FREIGHTLINER | CENTURY CLASS | 2006-2011 |
| FREIGHTLINER | CLASSIC XL | 2006-2008 |
| FREIGHTLINER | COLUMBIA | 2006-2020 |
| FREIGHTLINER | CORONADO | 2007-2020 |
| FREIGHTLINER | FLD | 2006-2010 |
| STERLING | 9500 | 2007 |
| STERLING | AT9500 | 2006-2007 |
| WESTERN STAR | 5700 | 2017 |
8 Associated Documents
Remedy Instructions and TSB
RCRIT-20V214-9587.pdf 112.842KB
Miscellaneous Document
RMISC-20V214-3754.pdf 709.161KB
Defect Notice 573 Report
RCLRPT-20V214-1411.PDF 218.34KB
Recall Acknowledgement
RCAK-20V214-3449.pdf 245.198KB
ISSUED Owner Notification Letter(Part 577)
Recall Quarterly Report #3, 2020-4
RCLQRT-20V214-8441.PDF 211.36KB
Recall Quarterly Report #1, 2020-2
RCLQRT-20V214-7485.PDF 211.154KB
Recall Quarterly Report #2, 2020-3
RCLQRT-20V214-1708.PDF 211.264KB
Latest Recalls Documents
- Product Included: Each package has 10 pcs oval gate posts reflectors, color: red, size: 4.49* 1.96*0.28 inches. Best size for you trailer.
- Durable Material: The reflector is made of high-quality plastic and strong UV PC lens material, with strong structure, hard to be broken, abrasion resistance, scratch resistance.
- Multiple Certification: The screw on rectangular reflectors passed DOT SAE E11 certification. When the car's illuminating light shines on the reflector, the driver will know the road ahead when he sees the reflected light.
- Easy to Install: Each reflector has two fixed mounting holes. The included package contains 20 sets of screws and bolts, which you can easily install for safe night driving.
- Wide Applications: The screw on reflectors is suitable for gate posts, trailers, trucks, bikes, boat, motorcycle, caravans, RV, lorry, tractors, agricultural machine, etc.
- Enhance Safety: Our round safety reflectors provide enhanced visibility and safety for driveways, roads, and parking lots
- Endurance Materials: Made from high-quality plastic, our reflector is built to last, providing long-lasting performance even in harsh weather conditions
- Easy Installation: With 2 convenient mounting holes, our reflector can be easily attached to posts, trailers, gates, and more, providing additional safety and visibility
- Waterproof and Sealed: Our reflector is designed with excellent waterproofing capabilities and a tight seal, ensuring its effectiveness and durability even in wet environments
- Versatile Use: Ideal for a wide range of applications, including post reflectors, trailer reflectors, and gate reflectors, our Oval Reflector is a versatile and reliable choice
- Durable Light Reflectors: Constructed of break resistant plexiglass so that you can come home with confidence no matter the time
- Highly Reflective: Make marking boundaries and obstacles simple and effective with these high visibility home reflectors
- Multipurpose Reflectors: These home safety tools can be used on mailboxes, garbage cans, stakes, houses, and much more
- Simple Installation: Hy-Ko's various reflectors can be quickly and easily staked or stuck to optimal locations. Simply choose the appropriate reflector for your needs and apply it facing your light source
- Reliable and Effective Signage: Hy-Ko is determined to provide excellent products like these home reflectors by operating with integrity, reliability, and professionalism from start to finish
- Package Contents: each pack contains 16 circular reflectors, the color is red, the quantity is sufficient, the color is prominent enough to meet your usage needs
- Easy to Install: there is a mounting hole in the center of the reflector for screw mounting (screw not included), it can be quickly and easily installed on any flat surface, ensuring it can fit and easy removal or keep the wall dry and clean, tear off the adhesive backing protective film, stick the reflector in place for 24 hours
- Wide Range of Uses: reflectors have a wide range of applications in daily life, suitable for trailers, RVs, campers and other vehicles as well as boats, agricultural machinery, mailboxes, driveway property marking posts, stakes, houses, walls, Doors, bicycles, motorcycles, etc., suitable for indoor and outdoor use
- Quality Material: made of highly reflective, reliable and durable plastic material, with waterproof performance, good waterproof sealing, preventing water droplets from seeping into the interior, and long service life, these reflectors have strong reflective properties, which increases safety and visibility sex, each reflector is 6 cm/ 2.36 inches in diameter
- What the Product Does: the safety reflector provides visibility and signal, in the dark, when the light hits, the reflector has a bright and clear reflection; you can see your lane more clearly at night or in any weather for safe driving, ideal for marking driveways and curbs for snow removal
- Highly visible: The top of the driveway markers has a 4-inch diameter double-sided reflector and an 8-inch reflective tape wrapped around the post body, making it easy to see from any direction when the headlights are on. Guide you to enter and exit the garage more safely. In winter, driveway reflectors can prevent your yard from being damaged by Snowplow
- Easy to Install: 10PCS 48 "x 1/4" fiberglass driveway reflectors are smooth and burr free, with a tapered end and a pointed bottom design, making the pile easy to install. The snow stakes pole adopts a three section design, which is more convenient for storage and carrying
- High quality: driveway pile made of glass fiber through pultrusion process. The driveway reflectors on poles is light in weight, but high in strength and toughness, and can be used in ambient temperatures of - 22 to 140 degrees Fahrenheit
- Flexibility: The snow stakes driveway markers has high tensile resistance and is not easy to break. It always recovers quickly after bending without causing any damage
- Timely service: if you have any questions about reflective driveway markers, please feedback us
This product presentation was made with AAWP plugin.