Safety Recall Campaign SRV-RCL-20-001 – CR190 – Front Brake Pads Replacement – 2017 Ducati 1299 Superleggera Motorcycles

April 23, 2020 NHTSA CAMPAIGN NUMBER: 20V232000

Brake Pads May Corrode/Detach From Backing Plate

If the front brake pads friction material detaches from the backing plate occurs, the motorcycle may experience increased stopping distance, increasing the risk of a crash.

 

NHTSA Campaign Number: 20V232

Manufacturer DucatieBay logo North America

Components SERVICE BRAKES, HYDRAULIC, SERVICE BRAKES

Potential Number of Units Affected 97

 

Summary

DucatieBay logo North America (DucatieBay logo) is recalling certain 2017 Superleggera motorcycles. The front brake pads may corrode, potentially causing the front brake pads friction material to detach from the backing plate.

 

Remedy

DucatieBay logo will notify owners, and dealers will replace the front brake pads, free of charge. The recall is expected to begin June 20, 2020. Owners may contact DucatieBay logo customer service at 1-888-391-5446. DucatieBay logo’s number for this recall is SRV-RCL-20-001.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check for Ducati Recalls

 


CR190 – Front brake pads replacement

1299 Superleggera Model Year 2017 (all versions)
Safety Recall Campaign SRV-RCL-20-001

 

Date: April 23, 2020

To: Dealer Principal, General Manager, Service Manager, North American Dealer Network

From: Richard Kenton, Technical Director Eric Bradley, Technical Training and Publications Manager


 

Dear Dealers,

Due to a defect in the production process carried out by the braking system manufacturer, it is necessary to replace the front brake pads for the above-indicated model. The friction material might separate from the plates of the brake pads due to this non-conformity.

NON-conforming brake pads can be distinguished from the conforming ones by the plate part number identified below:

NON-CONFORMING

plate part no.07.9882.36

NON-CONFORMING Brake Pads
CONFORMING

plate part no.07.9882.39

CONFORMING Brake Pads

 

The part number of the conforming front brake pad set required to order in DCS is 61341461A.

 

NOTE

Should you have front brake pads for the 1299 Superleggera model in stock, we kindly ask you to check whether the part number shown on the plate is conforming or not before installation. If the component is non-conforming, proceed with a request to return this component (RMA) and order the new, correct part number.

 

WARNING

Replace these components even if non-OEM (Original Equipment Manufacturer) brake pads are installed on the motorcycle. If the Customer refuses the update, make notes on the Repair Order that the Recall has not been performed at the Customer’s specific request and then ask the customer to sign the document to acknowledge this.

 

Application

You can find the precise list of VIN numbers involved in CR190 on the DCS, in sections:

VIN HISTORY
VIN HISTORY
It is possible to search by individual frame number.
CAMPAIGNS
CAMPAIGNS
It is possible to search for all the frame numbers that you received from DucatieBay logo North America.

 

DCS

 

Customer Impact

All motorcycles in your inventory (to be registered or already registered) and to be delivered to final Customers must be updated during pre-delivery operations and always before delivery to the final Customer. All motorcycles already delivered to final Customers must undergo this inspection as soon as they come to your workshop.

 

Parts Distribution

The part no. 61341461A (x2) required to carry out the upgrade under this Safety Recall Campaign must be ordered for each affected frame number.

 

Warranty reimbursement rules

The reimbursement to implement the update CR190 will be issued through the standard warranty claim procedure via the DCS. The warranty claim is pre-filled and is identified as CR190.

You shall be reimbursed for the cost of the components required for the repairs (Front brake pads part no. 61341461A), and labor time of 30 minutes (5 Labor Units) to include:

  • Vehicle Reception
  • Replacing the front brake pads
  • Soft cleaning of the vehicle
  • Vehicle Delivery

 

Table of Contents

Page
Introduction 1
  
Application 2
  
Customer Impact 2
  
Parts Distribution 2
  
Warranty Reimbursement Rules 2
  
Spare Parts 3
  
Service Solution 4
  
Additional Requirements and Notes 5
  
Customer Letter Example 6

 

Spare Parts

The components to be used for this update are:

Part no. Description Photo Quantity
to order
(pcs)
61341461ASet of front brake pads
Set of front brake pads
2

 

Service Solution

To replace the front brake pads, please refer to the instructions given in the Workshop Manual, in Section 4: “Maintenance Operations – Inspection and wear of front brake pads” concerning the affected motorcycle.

 

WARNING

You must protect the rim near the work area closest to the brake caliper from damage due to the use of tooling and the removal of the brake caliper from the rotor.

Apply multiple layers of painter’s tape to this work area to prevent contact and/or damage.

Any damages caused to the rim during this repair are the responsibility of the dealer.

In case of damage, submit a YouTech with detailed images to your Service Area Manager for recommendations on corrective actions.

 

NOTE

 To tighten the front brake calipers, follow the notes below:

  • Apply ROCOL DRY MOLY PASTE (or equivalent) lubricant on the fastening screws.
  • Start the screws by hand and pre-tighten them to a torque of 2 Nm.
  • Repeatedly operate the lever of the front brake to allow the brake pads to settle in place.
  • Check that the brake fluideBay logo level in the relevant reservoir is not below the minimum (MIN) indicator. If this is not the case, proceed with the top-up.
  • Hold front brake levereBay logo pulled towards the handgrip while tightening the caliper screws (1) to 45Nm ± 5%.
caliper screws (1)

 

Campaign Authorization

DucatieBay logo North America, Inc. will mail a notification letter to all known owners. If a customer does not present this notification letter, it is important that you confirm the eligibility for recall status on the DCS before you commence work. Reimbursement requests for duplicate recall campaign repairs will not be accepted.

 

Dealer Obligation

This program is designed to complete the necessary repairs and to achieve owner satisfaction. Therefore, we ask that you to take prompt and courteous action in accordance with these directives. Please provide a copy of this communication to every person in your dealership who has recall-related responsibilities.  Please direct any questions or concerns to your Service Area Manager.

 

Thank you for your cooperation.

 

Service Department
DucatieBay logo North America, Inc.

 

For questions on this Safety Recall Campaign,  please contact your Service Area Manager.


IMPORTANT SAFETY RECALL

This notice applies to your vehicle: VIN XXXXXXXXXXXXXXXXX

NHTSA Recall No. 20V-XXX

 

April 23, 2020

Customer Name
Customer Address
City, St, Zip Code

 

Subject: 

Ducati Motorcycle:  1299 Superleggera Model Year 2017 (all country versions)

NHTSA Campaign I.D. Number: 20V-XXX

Transport Canada Safety Recall I.D. Number: 2020-XXX

Dealer Bulletin: SRV-RCL-20-001

 

Dear DucatieBay logo Owner,

This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle Safety Act. (For USA Owners). This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. (For Canadian Owners). DucatieBay logo Motor Holding S.P.A. has decided that a defect which relates to motor vehicle safety exists in certain 2017 1299 Superleggera motorcycles. Our records indicate that you are the owner of a DucatieBay logo motorcycle affected by this safety recall campaign. Please take the time to read this letter and help us take the appropriate steps to ensure that your vehicle is operating properly.

 

What is wrong?

Ongoing product quality tests have identified a defect with the manufacturing process of the front brake pads supplier. The brake pad friction material may be improperly protected against corrosion, potentially causing the friction material to separate from the backing plate, compromising braking performance and increasing the risk of damage and/or injury.

 

What will DucatieBay logo do?

An official DucatieBay logo dealer will replace the front brake pads of affected motorcycles, free of charge. The repair will take approximately 30 minutes to complete. Service time will vary depending on dealer scheduling.

Please, contact your local DucatieBay logo Service center as soon as possible to schedule an appointment for the repair. You may continue to use your motorcycle to reach your DucatieBay logo authorized dealer.

To locate your nearest authorized DucatieBay logo dealer, please go to www.ducatieBay logo.com, and select the “dealer locator” or you may call toll free from the U.S. 1-888-391-5446.

Federal regulations require that any lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

 

Service Problem Help:

If you believe that your dealer has failed or is unable to remedy the defect without charge, or within a reasonable period of time, please contact DucatieBay logo North America Customer Care at  1 (888) 391-5446.

 

If you still cannot obtain satisfaction, you may submit a written complaint to:

 

For USA Customers:

Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, D.C. 20590

 

Or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1- 800-424-9153), or go to

HTTP://WWW.SAFERCAR.GOV.

 

For Canadian Customers:

Please contact DucatieBay logo customer service at 1-888-391-5446 or for additional information about the recall you, can contact Transport Canada at 1-800-333-0510.


TREAD ACT CUSTOMER REIMBURSEMENT PLAN

If you have paid for the repair described in the attached letter, and you would like to be considered for reimbursement, please contact your authorized DucatieBay logo dealer. Expenses from repair facilities outside of the authorized DucatieBay logo dealer network will be considered; however, the procedure must meet DucatieBay logo North America’s standards.

Your authorized DucatieBay logo retailer will request a copy of your owner notification letter, as well as, a copy of your previously paid invoice. They’ll inspect the vehicle, if still in your possession, prior to submitting a claim on your behalf to DucatieBay logo North America, Inc. for reimbursement.

Only a repair involving this safety recall campaign is reimbursable. DucatieBay logo North America, Inc will not reimburse consequential expenses such as towing, rental, and accommodations.

We recommend that your authorized DucatieBay logo dealer be your primary contact on this issue. We anticipate that your authorized DucatieBay logo dealer will be able to answer any questions that you may have regarding your qualifications for reimbursement of a previous repair; additionally, our Customer Relations Dept. may be contacted at 888-391-5446 for any special assistance required.

 

What if you no longer own the vehicle? 

If you no longer own the vehicle, please e-mail your change of ownership information to ContactUs@ducatieBay logo.com or contact DucatieBay logo North America Customer Care at 1 (888) 391-5446.

 

We regret any inconvenience to you from this action; however, your safety and satisfaction are important to us.

 

Sincerely,

 

Richard Kenton
Technical Director – DucatieBay logo North America

 


1 Affected Product

Vehicle

MAKEMODELYEAR
DUCATIeBay logo1299 SUPERLEGGERA2017

 


8 Associated Documents

Owner Notification Letter(Part 577)

RCONL-20V232-8693.pdf 198.825KB

 


Safety Bulletin

RCSB-20V232-2112.pdf 354.481KB

 


Defect Notice 573 Report

RCLRPT-20V232-9099.PDF 216.423KB

 


Recall Acknowledgement

RCAK-20V232-5410.pdf 244.803KB

 


Recall Quarterly Report #1, 2020-2

RCLQRT-20V232-8617.PDF 211.152KB

 


Recall Quarterly Report #3, 2020-4

RCLQRT-20V232-6331.PDF 211.34KB

 


Recall Quarterly Report #2, 2020-3

RCLQRT-20V232-3603.PDF 211.255KB

 


Recall Quarterly Report #4, 2021-1

RCLQRT-20V232-9276.PDF 211.444KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V232&docType=RCL

 


 

Bestseller No. 1
EBC Brakes FA409HH Disc Brake Pad Set
  • Made using high pressure die cast alluminium platforms with bonded brake linings
  • All shoes are radius ground and edge trimmed
  • Features lead in and lead out chamfers at lining ends
  • Original equipment style brake shoe springs included
Bestseller No. 2
3 Sets Front Rear Brake Pads Sintered for Harley Davidson Road King Road Glide Street Glide Electra Glide 2008-2020 Ultra Limited 2014-2020 Street Rod Night Rod V-Rod Tri Glide
  • 【Fitment】Fit for Harley Davidson Motorcycle ▶ Electra Glide FLHT 2008-2020 ▶ Street Glide FLHX 2008-2020 ▶ Road Glide FLTR 2008-2020 ▶ Road King FLHR 2008-2020
  • 【Fitment】 ▶ Street Rod VRSCR 2006-2007 ▶ Night Rod VRSCD 2006-2011 ▶ Tri Glide FLHTCUTG 2008-2013 2019-2020 ▶ V-Rod VRSC 2005-2017 ▶ Ultra Limited FLHTK 2014-2020
  • 【Material & Feature】Sintered by copper and tin formula compound is designed to any poor condictions.1. Back side with black anti-noise shims, it is effectively to reduce shrill squeak. 2. Middle with copper plating base is good for dissipation.
  • 【OEM#】42897-06 42897-08 41854-08 42850-06 FA409. 【Replacement OEM#】42897-06A 42850-06A
  • 【Package & Service】3 Set Brake Pads. JAVIK offer 24 hours customer service and 1 year product service. Please feel free to message if you meet any problem.
Bestseller No. 3
ECCPP Brake Pads for FLHTCU Ultra Classic Electra Glide 2008-2022, FLHR Road King FLHX Street Glide 2008-2022, Front and Rear Braking Pads Kits Set
  • Premium Brake Pads for Your Motorcycle or ATV: Brake Pads fit for 2008-2022 FLHR Road King FLHX Street Glide + 2008-2020 FLHTCU Ultra Classic Electra Glide & FLHRC Road King Classic & VRSCDX Night Rod, 2015-2022 Road Glide FLTRX Limited & FLHXS Street Glide Special & FLTRXS Road Glide Special + 2015-2021 FLHTK Electra Glide Ultra LTD & FLHTKL Electra Glide Ultra LTD Low, 2016-2020 FLTRU Road Glide Ultra + 2007-2020 VRSCDX Night Rod Special + 2009-2020 VRSCF V-Rod Muscle
  • High Performance Braking: Our brake pads are made of carbon fiber materials and are designed to provide superior stopping power, ensuring you can quickly stop your motorcycle or ATV when you need to.
  • Quiet and Durable: ECCPP brake pads are designed to be quiet and long-lasting, so you can enjoy a smooth and noise-free ride while also getting the most out of your investment
  • Easy to Install: Installing our brake pads is a breeze, and can be done by anyone without the need for any special tools. We've designed our brake pads to fit perfectly onto your motorcycle or ATV, so you can get back on the road in no time
  • Note: Please check the levers "title" or "products description" to for Make sure that this model type and model year work for your vehicle before ordering
SaleBestseller No. 4
EBC Brakes EBPCK1027 Complete Double-H Sintered Brake Pad Change Kit
  • Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015
  • Complete Double-H Sintered Brake Pad Change Kit includes 2 EBC FA409HH Front Brake Pads and 1 EBC FA409HH Rear Brake Pad
  • Double-H Sintered Brake Pads deliver high performance and are well known as the EBC flagship sintered high-performance brake pad
  • ECE R 90 brake safety approved and TUV tested, these ultra high friction HH rated brake pads remain a market leader above the rest as nothing else beats the performance of the Double-H Sintered Brake Pad
  • Manufactured in the US in the state-of-the-art sintering plant in Ohio, Double-H Sintered Brake Pads perform well in all weather conditions be it dry or wet and have a high longevity lasting for many miles
Bestseller No. 5
EBC Brakes FA209/2HH Disc Brake Pad Set
  • Made using high pressure die cast alluminium platforms with bonded brake linings
  • All shoes are radius ground and edge trimmed
  • Features lead in and lead out chamfers at lining ends
  • Original equipment style brake shoe springs included

Last update on 2026-05-25 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...