E-Track Retrofit Installation Instructions

NHTSA ID Number: 10078405

Manufacturer Communication Number: 2013-03-12

Summary

E-TRACK RETROFIT INSTALLATION INSTRUCTIONS

8 Affected Products

Vehicle

CARRY-ON

ENCLOSED CARGO TRAILER

2006-2013

ServiceMaster

E-Track Retrofit Installation Instructions

Install a 4’ high, 3/8” plywood kick plate over the existing interior wall using the correct fasteners as described in tab a or b. Fasten the kick plate into the wall studs to ensure a firm hold.
1. If the interior walls are ¾” plywood apply the 3/8” plywood kick plate using #10x24x2” self-tapping screws
2. If the interior walls are 3/8” plywood, apply the 3/8” plywood kick plate using #10x24x1.5” self-tapping screws.
Once the plywood kick plate is installed, mark the desired height for the E-track and use the same fasteners used in step 1. Fasten the E-track into the wall studs to ensure a firm hold. Factory height is 36” from the floor measured to the center of the E-track.
1. Caution: check the length of the fastener to avoid damage to the exterior aluminum siding.

Interior Ladder Rack Retrofit Installation Instructions

A minimum of two inside ladder racks are required spaced appropriately to fit the rung spacing of the ladder.
Installation steps:
1. Measure 3’ from the front of the interior flat wall and place the first ladder rack over the top of the interior wall.
2. Measure another 3’ from the first ladder rack and place the second ladder rack over the top of the interior wall.
3. Dry fit your ladder to ensure the ladder racks lay within the
4. Attach each ladder rack with two 2-5/16” x 1” hex lag screws.

2013_03.12

2013-03-12

https://www.nhtsa.gov/recalls?nhtsaId=10078405

https://static.nhtsa.gov/odi/tsbs/2013/SB-10078405-0335.pdf

⬇ Download PDF (481.74 KB)

Bestseller No. 1

VEVOR E Track Tie-Down Rail Kit, 32PCS 5FT E-Tracks Set Includes 8 Steel Rails & 8 O Rings & 8 Tie-Offs with D-Ring & 8 End Caps, Securing Accessories for Cargo, Motorcycles, and Bikes

1800 lbs High Load Capacity: This E-track rail system is your ultimate solution for securely transporting and storing heavy cargo, boasting a robust 1800 lbs load capacity. Say goodbye to worries about shifting loads – whether it's hefty furniture or industrial equipment, it's got you covered.
Built Tough: Crafted from industrial-grade solid steel with a fine powder coating, these E-track tie-down rails are built to last. No rust, no corrosion – just reliable performance. This material and surface treatment promise a long service life, even in harsh, damp environments, without worrying about quality issues.
Tailored Space: With 30 versatile slots of each trailer tie down rail, 8 O-rings, 8 tie-offs with D-ring, and adjustable length design, customization is at your fingertips. It provides you with highly customizable transportation and fixation solutions. Create the perfect setup for your cargo, maximizing every inch of space with ease.
Quick Installation: Installing this E-track rail kit is a breeze – just a few bolts, and it can be securely fastened to vehicles, walls, floors, or trailer beds. No fancy tools are required, and installation can be completed in minutes. Even novices can handle it easily, saving you time and hassle.
Versatile Usage: Our E-track kit supports multi-scenario use, including wall mounting, floor mounting, and bolt fixation, and is suitable for trailers, pickups, trucks, vans, etc. From garages and warehouses to workshops, it adapts to any environment. Secure your cargo with confidence, whether it's for commercial transportation or personal storage.

Bestseller No. 2

DC Cargo Mall E Track Tie Down Rail Kit 8' (4 Pack) for Garages, Vans, Trailers, Motorcycle Tie Downs, ATV Mountings - Powder-Coat Black - Secure Cargo & Heavy Loads Up to 2,000 lbs

BEST VALUE - Enjoy the safety and security of heavy duty solid powder coated steel construction at the best price. Each 8 Foot rail has 48 expertly engineered horizontal slot anchor points for tie downs, ratchet straps, J hooks, E track o ring installs and more.
HEAVY DUTY POWER - Each 8' E Track rail can safely and securely hold 2,000 pounds of load and equipment, vehicles and materials. Perfect for securing ATVS, UTVs, tractors, landscaping equipment, quads, furniture, tools, storage containers, oil drums and more.
VEHICLE SAFE - Don't let gravel worksites, bumpy mountain roads or highway potholes mess with your equipment. Our POWERFULLY STRONG E Track rail system will secure your valuable equipment when installed in your box truck, work van, enclosed or open trailer with ease.
FLOOR OR WALL INSTALL - Easily and quickly secure your E track tiedown rail system on a wood or metal floor or wall with just a few screws. The crush proof rails can withstand vehicle rolling over them, are weatherproof, scratch and dent resistant.
DC CARGO MALL - We offer POWERFULLY STRONG E Track beam systems and all the accessory options to customize, fit, organize and protect your work and recreation equipment. Available in a variety of sizes and pack quantities to suit your needs.

Bestseller No. 3

VEVOR E-Track Tie-Down Rail Kit, 6 Pack 5 ft E Track Rails, 26 Pcs Includes 2 Ratchet Straps & 6 O-Rings & 6 Tie-Offs with D-Ring & 12 End Caps, Fit for Garages Vans Trailers Motorcycles

Complete 26-Piece E-Track Kit: Get a ready-to-use system with (6) 5ft rails, (2) ratchet straps, (6) O-ring anchors, (6) rope tie-offs. The alloy-steel base secures up to 1,500 lb of cargo on E tracks. The stable support keeps your gear in place on rough roads and long trips. A Complete tie-down system has multiple cargo tie-down points prepared for your trailers, pickups, trucks, and vans.
Stand Up to Any Challenge: Each rust-resistant rail provides 30 anchor points to position odd-shaped loads and reduce scuffs. The rail is made from heavy-duty steel, powder-coated to stop rust and corrosion, so you can depend on them to hold down heavy loads. Get ready for all in one reliability and durability.
Durable Polyester Straps: This 12' x 2'' polyester strap has high heat resistance, corrosion resistance, and tensile strength. The metal ratchet and ergonomic lever is aiming to contribute to achieving smooth operation and efficiency during all your securing work.
Useful Tie-offs with D-Ring: The E track rail kit includes polyester tie-offs and straps that have great waterproof performance, pull resistance, and abrasion resistance. The straps have a standard connector, which fits perfectly with the track, and is also equipped with an alloy steel D-ring. These polyester straps have a strong capacity of 1000 lbs and can be used with a variety of hooked ropes.
Tie-Down & Organization: This trailer tie down system secures heavy loads for transit and organizes daily gear. Garages, enclosed trailers, and work vans stay tidy with tools, cables, and spares in place. Spring-loaded clips and click-in hardware install in seconds. The ratchet straps of our E-track rail system let you dial in tension fast, so you secure cargo without tools.

Bestseller No. 4

VEVOR E-Track Tie-Down Rail Kit, 5' E Tracks Set, 16Pcs Includes 4 Steel Rails & 2 Single Slots & 6 O-Rings & 4 Tie-Offs w/D-Ring & 2 Ratchet Straps, Cargo Motorcycles Bikes Securing Accessories

Versatile E Track Tie-Down Kit: Are you worried about your precious cargo or belongings rolling away? Well, let's put an end to that! A Complete tie-down system has multiple cargo tie-down points prepared for your trailers, pickups, trucks, and vans. Lock E-Track ratchet straps and accessories into rails, and get ready to secure cargo like never before.
Stand Up to Any Challenge: The 5 ft (1.52 m) E-track rails each have multiple 1" x 2.5" slots, allowing you to construct the perfect tie-down system every time. The rail is made from heavy-duty steel, powder-coated to stop rust and corrosion, so you can depend on them to hold down heavy loads. Get ready for all in one reliability and durability.
Useful Tie-offs with D-Ring: The E track rail kit includes polyester tie-offs and straps that have great waterproof performance, pull resistance, and abrasion resistance. The straps have a standard connector, which fits perfectly with the track, and is also equipped with an alloy steel D-ring. These polyester straps have a strong capacity of 1000 lbs and can be used with a variety of hooked ropes.
15FT Durable Polyester Straps: This 15' x 2'' polyester strap has high heat resistance, corrosion resistance, and tensile strength. The metal ratchet and ergonomic lever is aiming to contribute to achieving smooth operation and efficiency during all your securing work.
Perfectly Crafted O-Rings: These O-rings adopt high-quality iron that is sturdy and has great rust resistance and an excellent capacity of 1500 lbs. The hoops are designed to meet standard size requirements and can be used with E-tracks and various hooked ropes. In addition, we have prepared 2 additional single-slot bases for you to use the O-rings individually. All of these are included with you in mind, so you can securely stay on track consistently.

SaleBestseller No. 5

Elechomes E Track Tie-Down Rail Kit：88 Pcs Set Etrack kit 6 Rails, 2 Ratchet Straps, 6 Rope Tie Offs, 6 O Ring Anchors, 6 J-Hooks, 2 Single Slot, 12 End Caps for Garages Vans Trailers Motorcycle

Elechomes E Track Tie-Down Rail Kit：88 Pcs Set Etrack kit 6 Rails, 2 Ratchet Straps, 6 Rope Tie Offs, 6 O Ring Anchors, 6 J-Hooks, 2 Single Slot, 12 End Caps and 48 Screws Securing Accessories for Garages Vans Trailers Motorcycle
High-Quality 15ft E-Track Ratchet Straps：Our 15' x 2'' polyester straps are designed to withstand high heat and corrosion, with a breaking strength of 4400lbs. The metal ratchet and ergonomically designed lever ensure smooth operation and efficiency in all fastening tasks.
Diverse Accessory Combinations：Made of high-quality iron, the O-rings and J-hooks are rust-resistant and have a working load limit of 1452lbs. They fit standard size requirements and can be used with various E-track, hooks and ropes. Plus, 2 single slots are included for separate use with a working load limit of 616lbs, catering to various needs.
Heavy-Duty, Powerful and Durable：The E-Track system and trailer accessories are made of heavy-duty steel that has been powder coated for excellent weather, rust, and corrosion resistance and. Each track has a breaking strength of 1870lbs, making them perfect for trailers, trucks, RVs, warehouses, and garages. They are ideal for securing ATVs, UTVs, motorcycles, tractors, landscaping equipment, furniture, tools, storage containers, and oil drums.
Quick and Easy Installation：Got a few minutes? That’s all it takes to install this trailer e track on wooden or metal floors or walls with screws. Once installed, each E-Track provides multiple anchor points, enabling you to locate anchor points wherever necessary. For safety, install screws every 3 slots.