June 9, 2020 NHTSA CAMPAIGN NUMBER: 20V339000
Frameless Window Glass Panels May Detach
If the window glass detaches while the vehicle is moving it could become a projectile, increasing the risk of a crash.
NHTSA Campaign Number: 20V339
Manufacturer Thor Motor Coach
Components VISIBILITY
Potential Number of Units Affected 71
Summary
Thor Motor Coach (TMC) is recalling certain 2020-2021 ACE, 2021 Four Winds and 2020 Gemini, Axis, Compass, Delano, Windsport, Hurricane, Outlaw, and Vegas motorhomes. The adhesive bond between the glass and the metal hinge frame of the frameless windows may fail which would then allow the glass to detach and fall out.
Remedy
TMC will notify owners, and dealers will inspect the frameless windows for proper adhesive bond strength, replacing the windows as necessary, free of charge. The recall began July 10, 2020. Owners may contact TMC customer service at 1-877-855-2867. TMC’s number for this recall is RC000192.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Technical Service Bulletin
| Recall # | 20V-339 / 2020-260 | ||
| Description/Title: | LCI Frameless Windows | ||
| Affected Product Line(s): | Certain model year 2020/2021 Ace, Axis, Compass, Delano, Four Winds, Gemini, Hurricane, Outlaw, Vegas, and Windsport motorhomes | ||
| Service Campaign # : | RC000192 | Released Date: | 7/10/2020 |
| Codes: | Inspect Only:
TMCRC80489Y
Inspect with Repair: TMCRC80489V Photos Required for Repair preauthorization requests | Document Date: | 7/10/2020 |
| Time Allowed: | Inspect Only:
0.5 per VIN
Inspect with Repair: 0.8 (+ 0.3 for each additional window) | Document Revision: | A |
Issue:
In certain Lippert Components, Inc. (LCI) 3000-Series frameless windows, there is a potential poor adhesive bond between the hinge extrusion and the latch extrusion to the glass. If the adhesion bond fails where the glass meets the hinge frame, the window glass could partially detach or completely separate. If the window completely separates while the vehicle and/or trailer is in transit, it could become a road hazard, potentially increasing the risk of a crash or injury.
Tools Required (For repair):
Cordless or electric drill/screw gun
3/16” Drill Bit
Pop Rivet Gun
Phillips Screw Bit
Ladder
Part(s) Required:
Window Vent(s) Replacement – as needed
Instructions:
Use the following LCI window instructions to perform the pull test and replace the window vent(s) as needed.
3000 SERIES WINDOW VENT BONDING INSPECTION
| TSB Number: | TSB 15-002-19 |
| Product: | 3000 Series Windows (EPW, FV, FVD, FVSE, SEFV, SESV, SV, SVD, SVSE, VEPW) |
| Date: | March 6, 2020 |
Subject
Identification and inspection of a potential adhesive bond issue between the glass and aluminum frame for the following 3000 series frameless windows manufactured between January 6 through January 23, 2020:
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
The “CAUTION” symbol above is a sign that a procedure has a safety risk involved and may cause personal injury, product and/or property damage if not performed safely and within the parameters set forth in this document.
Use appropriate personal protective equipment (PPE) for the procedure being performed.
Moving parts can pinch, crush or cut. Keep clear and use caution.
Resources Required
- Cordless or electric drill or screw gun
- Phillips screw bit
- 3/16″ drill bit
- Pop rivet gun
- Ladder
Window Identification
Window Size
Window Size _____ X _____ = from inside trim ring RPO label or measure outside the whole/entire window Width X Height of glass, edge-to-edge.
Egress Windows
A. Inside the unit an EXIT sticker (Fig. 1) or red handle (Fig. 2A) will be present.
B. Outside the unit the white backside of the EXIT sticker will be visible.
Insulated Windows
A. Inside the unit a smaller INSULATED WINDOW sticker (Fig. 3) or a super spacer (Fig. 4A) sandwiched between two panes of glass can be seen.
B. Outside the unit the white backside of the INSULATED WINDOW sticker (Fig. 3A) is seen.
Egress and Insulated
A. Inside the unit a smaller INSULATED WINDOW sticker (Fig. 3) can be seen or the super spacer (Fig. 4A) sandwiched between two panes of glass will be visible in addition to the EXIT sticker (Fig. 1) or red handle (Fig. 2).
B. Outside the unit the white backside of the INSULATED WINDOW sticker (Fig. 3) can be seen located above the white backside of the EXIT sticker (Fig. 1).
Inspection
Note: Windows must be inspected (viewed) from outside the unit.
1. Make sure the unit is on a level, flat surface then chock the wheels.
2. Inspect the frameless window for proper adhesive bond where the glass meets the hinge frame (Fig. 5A).
Note: Fixed glass does not need to be inspected.
3. Using under 20 pounds of force, or the amount of force it would take to open a car door, test all 3000 series crank-out vent and egress windows by gently tugging on the glass at the frame by hand or with a tool that will not scratch the glass.
4. If the glass does not separate from the hinge (Fig. 6A), it is a good bond. DO NOT REPLACE the vent. If the glass is not adhering to the vent (Fig. 7A), the glass DOES NEED TO BE REPLACED.
Required Repair Form
Action Required
Submit all claims to RV OEM.
Inspection: 0.5 hour per unit
Replacement of glass: 0.3 hour per window
3000 SERIES WINDOW (WITH SCISSOR LATCH) VENT REPLACEMENT
Purpose
This document outlines the steps for replacing the vent sash (Fig. 1) on a 3000 series window, either with or without a mullion (Fig. 2A) that is equipped with a red scissor latch.
Resources Required
- Cordless or electric drill, screw gun or phillips screwdriver
- Ladder
NOTE: Save all removed screws for reinstallation of the window.
Procedure
Removal of Vent
1. If present, remove the screen (Fig. 2B) from the window.
2. Remove the screw(s) (Fig. 3A) from the mullion (Fig. 3B). If no mullion is present, remove the screws (Fig. 4A) located along the top of the window (Fig. 4B). Retain all screws.
NOTE: There can be two or three screws, depending on the size of the window.
3. Remove the screw (Fig. SA) securing the scissor latch bar (Fig. SB) to the window. Retain the screw.
After removing the screw, slide the scissor latch bar off the vent rail (Fig. SC). Retain the scissor latch for re-installation
4. With the vent at a 90-degree angle (Fig. 6), slide the vent out of the frame, if there is no mullion present.
If there is a mullion, lift the vent out of the frame.
Installation of Vent and Scissor Latch
1. Slide the scissor latch bar (Fig. 7 A) onto the vent rail (Fig, 7B) of the new vent, then secure the scissor latch bar to the rail with the previously-removed screw (Fig. 7C).
2. If there is no mullion present, slide the vent into the frame, keeping the window at a 90-degree angle.
If there is a mullion, attach the vent (Fig. 8A) to the frame, making sure the vent is aligned with the edge of the back frame (Fig. 8B).
3. Install the previously-removed the screw(s) into the mullion or to the top of the window.
4. If present, re-install the screen.
3000 SERIES WINDOW MULLION VENT REPLACEMENT
Purpose
This document outlines steps necessary to remove and replace a vent sash (Fig. 1) from a 3000 series window with a mullion.
Safety
The “CAUTION” symbol above is a sign that a procedure has a safety risk involved that may cause personal injury and/or product damage, including voiding of warranty, if not performed safely and in accordance with the safety procedures stated herein.
Moving parts can pinch, crush or cut. Keep clear and use caution.
Resources Required
- Cordless or electric drill or screw gun
- 1/,6″ Drill bit
- Phillips screwdriver
- Rivet gun
- Rivets (2x) (Part# 246120)
- Ladder
Procedure
Removing the Vent Sash
1. Working from the inside of the window, pull the white ring tab in the direction of the center of the frame (Fig. 2).
NOTE: If the screen remains positioned in the frame, it may be necessary to repeat this step pulling on the exterior nylon ring.
NOTE: In order to release the screen of windows installed in Thor manufactured units, it will be necessary to first turn the tabs located in each of the corners clockwise (Fig. 3), then pull the nylon ring tab.
2. Remove screw(s) (Fig. 4A) from inside of mullion (Fig. 4B). There could be one or two screws, depending on size of window. Set screw(s) aside for later use.
3. Open operator a few inches (Fig. SA), this will make sure that the drill does not hit and damage the operator.
Remove screw from operator handle (Fig. SB). Set screw and handle aside for later use.
4. Using a drill and 1/i611 drill bit, drill out the rivets (Fig. 6) from the operator. Wipe away any loose debris from the drilling operation.
5. Lift the operator (Fig. 7 A) up and over the frame (Fig. 78). Open the operator and slide the operator off the vent bar (Fig. 7C). If necessary, deburr drilled holes and clean area.
6. Remove the plastic operator spacer from inside the vent bar, if equipped, and retain for re-installation.
7. Working from the outside of the unit, lift the vent to a 90-degree angle (Fig. 8), then pull straight down, removing the vent.
New Vent Installation
1. Attach the new vent to the frame, making sure the vent (Fig. 9A) is aligned with the edge of the back frame (Fig. 98).
2. Once engaged in hinge, make sure the vent is aligned with the edge of the back frame.
3. Reinstall the screw(s) previously removed in step 2 of Removing the Vent Sash.
4. Place the operator spacer, if equipped, back into the vent’s operator bar.
5. With the wheels facing towards the vent, slide the open operator (Fig. 1 0A) back into the vent bar (Fig. 1 OB).
6. Lift the operator up and over the back frame. Use the removed handle to close the operator.
7. Remove handle from the operator.
8. Using a rivet gun, install two rivets (24621 0) to secure the operator in place.
9. Secure handle to the operator with screw removed in step 3 of Removing the Vent Sash.
10. Snap previously removed screen (step 1 of Removing the Vent Sash) in place.
NOTE: For Thor manufactured units, turn the corner tabs (Fig. 3) counterclockwise.
3000 SERIES WINDOW VENT SASH REPLACEMENT
Purpose
This document outlines the steps for removing a vent sash (Fig. 1) from a 3000 series window, either with or without a mullion, that is equipped with a red-handled push bar.
Resources Required
- Screw gun/Phillips screwdriver
NOTE: Save all removed screws for reinstallation of the window.
Procedure
Removal of Vent and Push Bar
1. Remove the screen (Fig. 2A) from the window, if one is present.
2. Remove the screw(s) (Fig. 3A) from the mullion (Fig. 3B). If no mullion is present, remove the screws (Fig. 4A) located along the top of the window (Fig. 4B). Retain all screws.
NOTE: There can be two or three screws, depending on the size of the window.
3. Remove the screw (Fig. SA) securing the red-handled push bar (Fig. SB) to the window. Retain the screw.
4. After removing the screw, push the handle of the push bar through the bracket (Fig. 6A) then slide the push bar (Fig. 6B) off the vent rail (Fig. 6C).
5. Slide (or lift if there is a mullion present) the vent out of the frame. The vent needs to be at a 90-degree angle to be removed from the frame (Fig. 7).
Installation of Vent and Push Bar
1. Slide (or attach if there is a mullion present) the vent into the frame, making sure the vent is aligned with the edge of the back frame (Fig. 8).
2. Install the previously-removed the screw(s) into the mullion or to the top of the vent.
3. Slide the push bar back onto the vent rail, then secure the push bar to rail with the previously removed screw.
4. Install the screen, if present.
RECREATIONAL VEHICLE
SAFETY RECALL NOTICE
Safety Recall: 20V-339
Safety Advisory: RC000192
July 2020
IMPORTANT SAFETY RECALL
This notice applies to your vehicle: «VIN»
«Owner_name»
«Street»
«City», «State» «Zip»
Dear «Owner_name»:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Thor Motor Coach (TMC) has decided that a defect which relates to motor vehicle safety exists in certain model year 2020/2021 Ace, Axis, Chateau, Compass, Delano, Four Winds, Gemini, Hurricane, Omni, Outlaw, Quantum, Vegas, and Windsport motorhomes. As a result, TMC is conducting a safety recall. We apologize for any inconvenience this action may cause you; however your safety and continued satisfaction are of the utmost importance to us.
| Reason for this campaign | In certain Lippert Components, Inc. (LCI) 3000-Series frameless windows, there is a potential poor adhesive bond between the hinge extrusion and the latch extrusion to the glass. If the adhesion bond fails where the glass meets the hinge frame, the window glass could partially detach or completely separate. If the window completely separates while the vehicle and/or trailer is in transit, it could become a road hazard, potentially increasing the risk of a crash or injury. |
| What we will do | TMC has contacted your selling dealer and has instructed them on how to perform a pull test on the frameless windows at the vent and replace the vent portion if the glue bond fails during the pull test. This will be done at no cost to you the owner. The service required should take approximately ½ hour to perform. |
| What we need you to do | At your earliest convenience, please contact your dealer and schedule an appointment to have this service completed. To locate the nearest authorized TMC service center, please visit https://www.thormotorcoach.com/locate–a–service–center/. If you have questions concerning this recall or if you need any assistance, please contact the TMC Warranty/Service Department by mail at TMC, P.O. Box 1486, Elkhart, IN 46515-1486, by phone at 877-855-2867, or by email at [email protected].
If you had appropriate repairs completed prior to receipt of this recall notice, and if you incurred any direct cost in connection with obtaining such repair, you may be eligible to receive reimbursement from TMC by contacting the TMC Warranty/Service Department. |
If after contacting TMC Customer Service you are still not satisfied we have done our best to remedy this situation, you may also submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590. You may call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153; or go to https://www.safercar.gov.) Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Thank you for your attention and cooperation in this matter.
Sincerely,
Hanah Klodzinski
Recall Compliance Coordinator
cc: National Highway Traffic Safety Administration (NHTSA)
RC000192
IMPORTANT SAFETY RECALL
Re: VIN
«Dealer_name»
«Street»
«City», «State» «Zip»
Dear Dealer:
This Safety Recall Notice is sent to you in accordance with the requirements of the United States National Traffic and Motor Vehicle Safety Act and is important for your safety.
Thor Motor Coach (TMC) decided that a defect which relates to motor vehicle safety exists in certain model year 2020/2021 Ace, Axis, Chateau, Compass, Delano, Four Winds, Gemini, Hurricane, Omni, Outlaw, Quantum, Vegas, and Windsport motorhomes
In certain Lippert Components, Inc. (LCI) 3000-Series frameless windows, there is a potential poor adhesive bond between the hinge extrusion and the latch extrusion to the glass. If the adhesion bond fails where the glass meets the hinge frame, the window glass could partially detach or completely separate. If the window completely separates while the vehicle and/or trailer is in transit, it could become a road hazard, potentially increasing the risk of a crash or injury.
The required action is to perform a pull test on the frameless windows at the vent and replace the vent portion if the glue bond fails during the pull test. The service required should take approximately ½ hour to perform.
Dealers that have stock units impacted by this recall can access the full list of affected VINs sold to their dealership by accessing the “Service Campaign” portion of the TMC Advantage Web Portal. If any unit on this list has been retail sold you are asked to notify the retail owner as soon as possible of this recall because their vehicle was not registered at the time the retail notice was mailed. Please immediately register any retail sold units on this list. As a reminder, you are required by law to complete this recall on any stock units in inventory prior to retail sale. Any vehicle lessor receiving this notice must forward a copy to the lessee within 10 days.
If you have questions concerning this recall, please contact the TMC Warranty/Service Department by mail at TMC, P.O. Box 1486, Elkhart, IN 46515-1486, by phone at 877-500-1020, or by email at [email protected].
We apologize for this inconvenience; however, we have taken this action in the interest of customer safety and continued satisfaction with our products.
Sincerely,
Hanah Klodzinski
Recall Compliance Coordinator
Re: NHTSA Recall No. 20V-339
| Item number | Product name |
| V000342225 | 3000 NV EPW 36 X 29 X 17 G20 TP BK NO SCRN F300-44277 |
| V000342226 | 3000 NV EPW 36 X 29 X 17 G20 TP INS BK NO SCRN F300-44278 |
| V000342228 | 3000 FV 18 X 18 G20 TP BK W/SCRN KNOB F300-44330 |
| V000342230 | 3000 FV 18 X 30 G20 TP BK W/SCRN KNOB F300-44331 |
| V000342231 | 3000 FV 18 X 30 G20 TP INS BK W/SCRN KNOB F300-44347 |
| V000342232 | 3000 FV 24 X 18 G20 TP BK W/SCRN KNOB F300-44332 |
| V000342233 | 3000 FV 24 X 18 G20 TP INS BK W/SCRN KNOB F300-44333 |
| V000342234 | 3000 FV 30 X 15 G20 TP BK W/SCRN KNOB F300-44334 |
| V000342235 | 3000 FV 30 X 15 G20 TP INS BK W/SCRN KNOB F300-44335 |
| V000342238 | 3000 FV 30 X 17 G20 TP BK W/SCRN KNOB F300-44301 |
| V000342241 | 3000 FV 36 X 15 G20 TP BK W/SCRN KNOB F300-44336 |
| V000342242 | 3000 FV 36 X 22 G20 TP BK W/SCRN KNOB F300-44337 |
| V000342246 | 3000 FVD 48 X 15 G20 TP BK W/SCRN KNOB F300-44338 |
| V000342248 | 3000 FVD 48 X 22 G20 TP BK W/SCRN KNOB F300-44340 |
| V000342250 | 3000 FVD 48 X 29 G20 TP BK W/SCRN KNOB F300-43209 |
| V000342255 | 3000 FVD 60 X 22 G20 TP INS BK W/SCRN KNOB F300-44352 |
| V000342257 | 3000 FVD 60 X 29 G20 TP INS BK W/SCRN KNOB F300-43222 |
| V000342262 | 3000 FVSE 42 X 29 G20 TP BK W/SCRN KNOB F300-44281 |
| V000342263 | 3000 FVSE 48 X 22 G20 TP BK W/SCRN KNOB F300-44342 |
| V000342264 | 3000 FVSE 48 X 22 G20 TP INS BK W/SCRN KNOB F300-43329 |
| V000342268 | 3000 FVSE 60 X 22 G20 TP INS BK W/SCRN KNOB F300-43562 |
| V000342270 | 3000 FVSE 60 X 29 G20 TP INS BK W/SCRN KNOB F300-43232 |
| V000342277 | 3000 SV 12.5 X 22 X 9 G20 TP BK W/SCRN KNOB F300-44249 |
| V000342278 | 3000 SV 12.5 X 22 X 9 G20 TP INS BK W/SCRN KNOB F300-44250 |
| V000342279 | 3000 SVD 48 X 22 X 9 G20 TP BK W/SCRN KNOB F300-00546103 |
| V000342283 | 3000 SVD 60 X 22 X 9 G20 TP BK W/SCRN KNOB F300-44796 |
| V000342284 | 3000 SVD 60 X 29 X 9 G20 TP BK W/SCRN KNOB F300-00590159 |
| V000368003 | 3000 SVD 72 X 22 X 9 G20 TP BK W/SCRN KNOB |
| V000376409 | 3000 NV EPW 30 X 40 X 17 G20 TP BK NO SCRN |
| V000376425 | 3000 SVD 42 X 22 X 9 G20 TP BK W/SCRN KNOB |
| V000376448 | 3000 FVSE 54 X 22.3 G20 TP BK W/SCRN KNOB |
| V000376452 | 3000 FVD 60 X 22.3 G20 TP BK W/SCRN KNOB |
| V000376456 | 3000 FVSE 60 X 22.3 G20 TP BK W/SCRN KNOB |
| V000379021 | 3000 FV 27 X 20.3 G20 TP BK W/SCRN KNOB |
| V000379030 | 3000 FV 36 X 22 G20 TP INS BK W/SCRN KNOB |
| V000379035 | 3000 FVD 42 X 20.3 G20 TP INS BK W/SCRN KNOB |
| V000379046 | 3000 FVD 60 X 22.3 G20 TP INS BK W/SCRN KNOB |
| V000379080 | 3000 FVD 48 X 28 G20 TP INS BK W/SCRN KNOB |
| V000379445 | 3000 SV 18.1 X 36.7 X 9 G20 TP INS BK W/SCRN KNOB |
| V000386205 | 3000 SV 12.4 X 22 X 9 G20 TP BK W/SCRN KNOB |
| V000450601 | 3000 FV 21.2 X 12.2 G20 TP INS BK W/SCRN KNOB |
| V000450620 | 3000 FV 28.2 X 12.2 G20 TP BK W/SCRN KNOB |
| V000450623 | 3000 FV 28.2 X 12.2 G20 TP INS BK W/SCRN KNOB |
| V000450629 | 3000 FV 28.2 X 18 G20 TP INS BK W/SCRN KNOB |
| V000450630 | 3000 FV 36 X 18 G20 TP INS BK W/SCRN KNOB |
| V000450634 | 3000 FV 27 X 20.3 G20 TP INS BK W/SCRN KNOB |
| V000450677 | 3000 FVD 54 X 22.3 G20 TP INS BK W/SCRN KNOB |
| V000450684 | 3000 FV 28.2 X 23 G20 TP INS BK W/SCRN KNOB |
| V000450709 | 3000 FVSE 42 X 26.3 G20 TP INS BK W/SCRN KNOB |
| V000450715 | 3000 NV EPW 37.3 X 40 X 17 G20 TP BK NO SCRN |
| V000450718 | 3000 NV EPW 37.3 X 40 X 17 G20 TP INS BK NO SCRN |
| V000451460 | 3000 SVD 65 X 30.2 X 17 G20 TP INS BK W/SCRN KNOB |
| V000471952 | 3000 VEPW 36 X 22 G20 TP BK W/SCRN ROTARY |
| V000471954 | 3000 VEPW 27 X 20 G20 TP INS BK W/SCRN ROTARY |
| V000471957 | 3000 VEPW 30 X 20 G20 TP BK W/SCRN ROTARY |
| V000471959 | 3000 VEPW 36 X 29 G20 TP BK W/SCRN ROTARY |
| V000483864 | 3000 FVD 48 X 18 G20 TP BK W/SCRN KNOB |
| V000487388 | 3000 SEFV 60 X 22.3 G20 TP INS BK W/SCRN KNOB |
| V000487409 | 3000 VEPW 27 X 20.3 G20 TP INS BK W/SCRN ROTARY |
| V000487416 | 3000 SVD 48 X 31 X 9 G20 TP INS BK W/SCRN KNOB |
| V000487422 | 3000 SEFV 42 X 22.3 G20 TP INS BK W/SCRN KNOB |
| V000487496 | 3000 SV 12.4 X 22 X 9 G20 TP INS BK W/SCRN KNOB |
| V000487502 | 3000 VEPW 30 X 20.3 G20 TP INS BK W/SCRN ROTARY |
| V000487518 | 3000 SV 18.1 X 31.3 X 9 G20 TP INS BK W/SCRN KNOB |
| V000487521 | 3000 SV 18.1 X 31.3 X 9 G20/OBS TP INS BK W/SCRN KNOB |
| V000487529 | 3000 SVSE 37.3 X 40 X 17 G20 TP INS BK W/SCRN KNOB |
| V000487538 | 3000 NV EPW 27 X 26 X 17 G20/OBS TP INS BK NO SCRN |
| V000491000 | 3000 FV 27 X 26 G20/OBS TP INS BK W/SCRN KNOB |
| V000491537 | 3000 FV 22.6 X 26 G20 TP INS BK W/SCRN KNOB |
| V000498245 | 3000 VEPW 27 X 26 G20/OBS TP INS BK W/SCRN ROTARY |
| V000503114 | 3000 SEFV 42 X 20.3 G20 TP INS BK W/SCRN KNOB |
| V000522139 | 3000 FV 30 X 20 G20 TP BK W/SCRN KNOB |
| V000536793 | 3000 SVD 48 X 22 X 9 G20 TP INS BK W/SCRN KNOB |
| V000544855 | 3000 VEPW 36 X 22 G20/OBS TP INS BK W/SCRN ROTARY |
11 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| THOR MOTOR COACH | ACE | 2020-2021 |
| THOR MOTOR COACH | AXIS | 2020 |
| THOR MOTOR COACH | COMPASS | 2020 |
| THOR MOTOR COACH | DELANO | 2020 |
| THOR MOTOR COACH | GEMINI | 2020 |
| THOR MOTOR COACH | VEGAS | 2020 |
| THOR | FOUR WINDS | 2021 |
| THOR | HURRICANE | 2020 |
| THOR | OUTLAW | 2020 |
| THOR | WINDSPORT | 2020 |
10 Associated Documents
Owner Notification Letter(Part 577)
RCONL-20V339-2957.pdf 36.951KB
Remedy Instructions and TSB
RCRIT-20V339-3852.pdf 6352.226KB
Miscellaneous Document-LCI Involved Components
RMISC-20V339-3468.pdf 400.414KB
Defect Notice 573 Report
RCLRPT-20V339-3336.PDF 220.396KB
Recall Acknowledgement
RCAK-20V339-4804.pdf 245.902KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V339-1150.pdf 196.631KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V339-3631.pdf 196.631KB
Recall Quarterly Report #2, 2020-4
RCLQRT-20V339-9148.pdf 210.936KB
Recall Quarterly Report #1, 2020-3
RCLQRT-20V339-5305.PDF 211.133KB
Recall Quarterly Report #3, 2021-1
RCLQRT-20V339-3708.PDF 211.317KB
Recalls Documents
- INVISIBLE GLASS CLEANER: Invisible Glass Cleaner is the #1 top seller in automotive for window and glass cleaning at home and in the car. Get a brilliant, streak-free shine that's instantly noticeable.
- DEEP-CLEANSING FOAM: This unique foam cleanser scrubs deep to remove road grease, grime, dirt, fingerprints, salt, mud, and more for glass so clean, you’ll think it’s invisible!
- CLEAR DRY FORMULA: There’s no streaks, no drips, and no mess thanks to the Invisible Glass Clear Dry formula. This unique formula contains no streaky soaps, scents, or dyes. Absolutely zero residue is left behind on your glass.
- SAFE FOR TINTED GLASS: Ammonia-free and perfect for all glass surfaces, including tinted windows, windshields, stainless steel appliances, and more.
- PROUDLY MADE IN THE USA: Invisible Glass is formulated, manufactured, and distributed in the USA. We use premium ingredients to deliver performance and reliability you can trust.
- STREAK FREE GLASS CLEANER (CLD30016) – Professional-grade formula cleans glass, windows, and mirrors without streaks or residue, leaving crystal-clear visibility on automotive and household surfaces.
- SAFE ON TINTED WINDOWS – Ammonia-free formula is safe for factory and aftermarket tints; cleans without damaging delicate coatings on tinted or treated glass.
- MULTI-SURFACE PERFORMANCE – Works on automotive glass, mirrors, household windows, bathroom glass, screens, and more for versatile cleaning power.
- REMOVES DIRT, GRIME, AND SMUDGES – Quickly eliminates fingerprints, dust, smoke film, and road grime for a spotless, streak-free finish every time.
- EASY SPRAY AND WIPE APPLICATION – Spray directly onto the surface or a microfiber towel, wipe clean, and buff for perfect clarity in seconds.
- NEW WINDEX AUTOMOTIVE: Windex Auto Spray Cleaner lets you drive in comfort and confidence at your convenience
- STREAK-FREE SHINE: each use instantly removes dust, dirt, and stubborn smudges and fingerprints
- SAFE ON TINTED WINDOWS: formula designed to be safe on all car glass interior and exteriors, including tinted windows
- AMMONIA FREE: our ammonia-free formula is safe to use on all kinds of surfaces inside and outside your car, including tinted windows and dashboard electronics
- WHAT YOU'LL GET: One bottle of Windex Automotive car cleaner, with packaging designed to prevent damage and leakage during transit
- RESIDUE FREE: The Invisible Glass CLEAR DRY formula contains no streaky soaps, scents, or dyes leaving absolutely ZERO residue on your glass.
- AMMONIA-FREE: This unique formula contains no ammonia, so it’s perfect for use on tinted and non-tinted glass
- CONVENIENT SPRAY BOTTLE: This 22-Ounce trigger spray bottle makes it easy to squeeze out every drop of glass cleaner for a brilliant shine on all glass surfaces in your car, truck, boat and RV. Perfect for use at home and the office tool
- SURFACES: Easily remove dirt, pet slobber, grease, fingerprints, sap, bugs and more from glass surfaces such as windshields, windows, and mirrors
- MADE IN USA: Proudly American-made, you can trust the quality and superior formula of this glass cleaner and window spray. It’s the best super window cleaner you can buy
- Automotive-Strength Cleaning Power: Rain-X delivers professional-grade performance on car windows, windshields, and mirrors, cutting through dirt, bug residue, tree sap, and road grime fast for a brilliantly clean result.
- Streak-free Shine Guaranteed: Our concentrated formula is engineered to leave zero streaks behind, giving your auto glass a flawless, crystal-clear finish that enhances visibility and keeps your vehicle looking its best.
- Works on Interior & Exterior glass: Tackles tough exterior contaminants like road grime and bug splatter while also eliminating interior smoke film, haze, and protectant overspray for total cabin clarity.
- Safe for All Tinted Windows: Specially formulated to be gentle on all permanently tinted glass, so you can clean every window in your vehicle confidently without risking damage to your tint or surface finish.
- Quick & Easy Two-Step Application: Simply spray onto glass and wipe with a dry paper towel or 100% cotton cloth for an instant streak-free shine — no complicated steps, no buffing, no residue left behind.
Last update on 2026-05-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.