April 5, 2018 NHTSA CAMPAIGN NUMBER: 18V219000
Valve Stem may get Damaged and Lose Air
Valve stem damage can result in loss of air pressure in the inner tire, causing an overload of the outer tire and increasing the risk of a crash.
NHTSA Campaign Number: 18V219
Manufacturer Newmar
Corporation
Components TIRES
Potential Number of Units Affected 72
Summary
Newmar Corporation (Newmar) is recalling certain 2018-2019 Newmar New Aire motorhomes built on Daimler Trucks FCCC XCS chassis equipped with wheels that have Freightliner-logo shaped holes. These wheels have a valve stem stabilizer that may dislodge and damage the valve stem.
Remedy
Newmar will notify owners, and Daimler Trucks dealers will inspect and replace the inner wheel valve stem stabilizer, as necessary, free of charge. The recall began on May 31, 2018. Owners may contact Newmar customer service at 1-800-731-8300. Newmar’s number for this recall is 18V-194.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2 Affected Products
Vehicle
| NEWMAR | NEW AIRE | 2018-2019 |
6 Associated Documents
Recall Acknowledgement
RCAK-18V219-2205.pdf 246.032KB
Recall 573 Report
RCLRPT-18V219-8902.PDF 214.487KB
Recall Quarterly Report #1, 2018-2
RCLQRT-18V219-5182.PDF 214.507KB
Recall Quarterly Report #2, 2018-3
RCLQRT-18V219-7279.PDF 211.225KB
Recall Quarterly Report #4, 2019-1
RCLQRT-18V219-0224.PDF 211.409KB
Recall Quarterly Report #3, 2018-4
RCLQRT-18V219-3744.PDF 211.309KB
Latest Recalls Documents
- These tire valve stems are well-constructed to maintain consistent pressure, easy to install and no leaks, keep air in the tire, save a trip to the tire store.
- Tyre valves stems are made of high quality rubber with a brass core, sturdy, durable, resistant to cold, heat, and ozone damage.
- Size: 4.4 x 1.9 cm / 1.73 x 0.75"; Fit standard rim hole diameter: 11.5 mm / 0.453". Please check your rim hole size before purchasing to ensure compatibility.
- Suitable for most vehicles (Tubeless tires / rims), including cars, go-karts, trucks, lawn mowers, trailers, motorcycles and more.
- Packaging: 10 PCS TR413 Tubeless Snap-in Valve Stems. Note: Maximum rated pressure: 16 bar.
- All Tool You Need - 1 pcs valve stem puller installer Tool, 10 Pcs TR412, 6pcs TR413, 6pcs TR414 valve stems with 20 pcs valve stem cores, 1 pcs single head valve core tool, 1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool.
- Valve Stem Puller - For installation or removal of snap in type tubeless tire valves
- Rubber Tire Valve Stem - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure well; Durable and practical
- 4 Way Tool - Remove your valve core, re-tap threads and ream the inside of the valve (also works on A.C. unit valves)
- Single or Double Head Tire Valve Core Remover - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool
- What you will get: you will receive a total of 100 pieces of tubeless tire valve stems (TR412: 50 pcs, TR413: 25 pcs, TR414: 25 pcs) ,sufficient quantity to meet your demands for daily use and replacement, you can store them for a long term use and please check the compatibility information carefully before placing an order
- Various Application: Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical
- Universal Rubber Stem: Valve stems are a standard diameter and fit for Cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, motorcycles
- Quality material: these black rubber snap-in valve stems are made of quality brass and ozone-resistant rubber, and have been tested by EPDM, ozone and leakage tests, and are equipped with high temperature brass valve cores, better performance, can serve you for a long time, economical and practical.100% leakage tested, high quality and providing safe tire system and safe driving.
- Easy to install: the standard length replacement tire valve stems are very easy to install and disassemble due to the snap-in design, you can easily install the valve stem with hands, time-saving and simple, providing you with much convenience when you are driving out; When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process
- One Size Suits Most Cars: each valve stem measures approx. 0.7 x 1.7 inches, Snap-in valve stems for tubeless 0.453" ( 11.5mm) diameter rim holes, simple for your storage and carry, practical and versatile to use, fitting most cars, lawn mowers, light trucks, small trailers, unicycles, motorcycles and other vehicles
- Serve You Long: made of brass and ozone resistant rubber, these snap in tire valve stems are resistant to breakage, deformation, and tear; In addition, they are EPDM, ozone and leak tested, come with high temperature resistant brass spool, with fine reliability, serviceability and performance, able to be applied for a long time
- Enhance Safety: these tire valve stems are able to keep your tires inflated at a constant level of air pressure well, helpful to guard your tire from wear and make the car run smoothly, nice accessories for improving the safety of your driving, which can bring big convenience to you
- Large Amount to Replace: there are 150 pieces of TR413 valve stems in the package, abundant in quantity, sufficient for you to use, replace in your work and daily life, and you can share them with family members; Please check the model and compatibility information carefully before ordering
- Effortless to Install and Disassemble: these black tubeless valve stems adopt snap in design, convenient for your installation and disassembly, meanwhile, they can be operated by hand, do not need complex steps, time saving and effort saving; Please note that the tire technician should always replace the valve stem when changing a tire
- 【Tool Material】Tyre valve stem puller is made of high quality alloy, which is sturdy and durable for a long service time. Valve: zinc alloy inside + rubber outside.Dual Single Head Valve Core Remover : plastic handle + robust steel shaft with corrosion-resistant plating.
- 【Tool Advantages】The tool sets easy to carry and use. Quickly remove or install the the tire valve. pulls out the valve stem with the principle of leverage, which can save your effort effectively.
- 【Easy To Install】Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems.
- 【Compatible】Suitable for repair of tubeless tires for passenger cars, motorcycles, ATVs, off-road vehicles and trucks.
- 【Package】1 pcs valve stem puller installer Tool, 5 Pcs TR412, 5pcs TR413, 5pcs TR414 valve stems with 10 pcs valve stem cores,10 x valve stem caps,2 pcs single head valve core tool,1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.